Messages from Program CMPSTART
This document contains the error messages
(CMPnnnn) that may be issued by the program CMPSTART
whose task is to start global common memory pools in Natural under BS2000.
For information on the program CMPSTART
, see
Common Memory
Pools in the Natural Operations documentation.
CMP0001 - p o o l n a m e : GLOBAL POOL
IS ACTIVATED
Explanation |
The common memory pool is successfully enabled and activated.
|
Action |
None. |
CMP0002 - d a t a s p a c e n a m e :
DATA SPACE CREATED
Explanation |
ESA Data Space is successfully created. |
Action |
None. |
CMP0003 - NO PARAMETERS ON SYSDTA FOUND
Explanation |
In SYSDTA , the parameter definitions are missing.
|
Action |
Check the job control for execution of CMPSTART .
|
CMP0004 - READING PARAMETERS FROM SYSDTA FAILED
Explanation |
Error from RDATA macro.
|
Action |
Check the job control for execution of CMPSTART .
|
CMP0005 - p o o l n a m e : GLOBAL POOL
TERMINATED NORMALLY
Explanation |
Common memory pool successfully terminated. |
Action |
None. |
CMP0006 - d a t a s p a c e n a m e :
DATA SPACE SUCCESSFULLY DESTROYED
Explanation |
The ESA Data Space was successfully destroyed. |
Action |
None. |
CMP0007 - p o o l n a m e : GLOBAL POOL
ABNORMALLY TERMINATED BY OPERATOR REQUEST
Explanation |
Common memory pool terminated from operator via console.
|
Action |
None. |
CMP0008 - p o o l n a m e : GLOBAL POOL
TERMINATED BY CANCEL
Explanation |
Common memory pool terminated with CANCEL command. |
Action |
None. |
CMP0009 - p o o l n a m e : ERROR IN
MACRO n a m e POOL NOT ALLOCATED,
R15=nn
Explanation |
An error from macro n a m e has
occurred. R15 contains the error number.
|
Action |
Contact Software AG Support. |
CMP0010 - p o o l n a m e : REQUESTED
POOL IS ALREADY ENABLED
Explanation |
A common memory pool with the defined name is already enabled.
|
Action |
Change the common memory pool name. |
CMP0011 - p o o l n a m e : A GLOBAL
NATURAL LOAD POOL MUST BE ENABLED WITH "PFIX=YES"
Explanation |
For a global Natural Load Pool parameter
PFIX is defined with NO (default).
|
Action |
Define PFIX=YES for the Natural Load Pool.
|
CMP0012 - p o o l n a m e : NATURAL
t y p e POOL INITIALIZATION FAILED, POOL NOT
ALLOCATED, R15=nn
Explanation |
An error during Buffer/Editor/Swap Pool initialization has
occurred. R15 containes the error number.
|
Action |
Contact Software AG Support. |
CMP0013 - DEFINITION OF KEYWORD PARAMETER n a m
e MISSING
Explanation |
To enable the common memory pool, the keyword parameter n a m
e must be defined.
|
Action |
Complete the parameters for this common memory pool. |
CMP0014 - THE OPERAND OF KEYWORD PARAMETER n a m
e IS NOT VALID
Explanation |
Invalid operand for keyword parameter n a m
e.
|
Action |
Correct the operand for the appropriate keyword parameter.
|
CMP0015 - THE OPERAND OF KEYWORD PARAMETER n a m
e EXCEEDS THE MAX. LENGTH
Explanation |
The operand of keyword parameter n a m
e is too long.
|
Action |
Correct the operand for the appropriate keyword parameter.
|
CMP0016 - n a m e IS NOT A VALID NAME
FOR A KEYWORD PARAMETER
Explanation |
Unknown keyword parameter n a m e.
|
Action |
Correct the name of the keyword parameter. |
CMP0017 - SPECIFIED SIZE IS TO BIG FOR LOCATION ABOVE
Explanation |
The defined pool size (operand of keyword parameter
SIZE ) exceeds the possible maximum size (2047 megabytes)
for a pool location above the 16-MB line.
|
Action |
Correct the operand of keyword parameter
SIZE .
|
CMP0018 - SPECIFIED SIZE IS TO BIG FOR LOCATION BELOW
Explanation |
The defined pool size (operand of keyword parameter
SIZE ) exceeds the possible maximum size (10 megabytes)
for a pool location below the 16-MB line.
|
Action |
Correct the operand of keyword parameter
SIZE
|
CMP0019 - ADDRESS ABOVE 13 MB IS INVALID FOR LOCATION BELOW
Explanation |
The defined number of megabyte (operand of keyword parameter
ADDR ) exceeds the possible maximum number (13 megabytes)
for a pool location below the 16-MB line.
|
Action |
Correct the operand of keyword parameter
ADDR .
|
CMP0020 - ADDRESS BELOW 16 MB IS INVALID FOR LOCATION ABOVE
Explanation |
The defined number of megabyte (operand of keyword parameter
ADDR ) must not be lower than 16 megabytes for a pool
location above the 16-MB line.
|
Action |
Correct the operand of keyword parameter
ADDR .
|
CMP0021 - WHEN "TYPE" IS DEFINED, DEFINITION OF "LIBR" IS NOT
ALLOWED
Explanation |
The parameter LIBR is only allowed for
a Load Pool. For the definition of a Load Pool, the parameter
TYPE is not allowed.
|
Action |
Correct the pool definition. |
CMP0022 - A LIBRARY IS DEFINED; OPERAND OF "NAME" GREATER 8
CHARACTERS
Explanation |
The name of a module which shall be loaded into a common
memory pool must not exceed 8 characters.
|
Action |
Correct the operand of keyword parameter
NAME .
|
CMP0023 - THE NAME OF NATURAL BUFFER POOL EXCEEDS 8 CHARACTERS
Explanation |
The name of a Natural buffer pool (TYPE=NAT ) must
not exceed 8 characters.
|
Action |
Correct the operand of keyword parameter
NAME .
|
CMP0024 - IF "PFIX=YES" IS DEFINED, THE OPERAND OF PARAMETER "ADDR"
MUST BE DEFINED ALSO
Explanation |
When the address of a common memory pool shall be fixed, the
operand of keyword parameter ADDR must be defined.
|
Action |
Define the operand of keyword parameter
ADDR .
|
CMP0025 - ONE OPERAND OF PARAMETER "TYPE" OR "LIBR" IS MISSING
Explanation |
For a load pool, the parameter LIBR is
necessary and for all other pools the definition of parameter
TYPE must be done.
|
Action |
Correct the pool definition. |
CMP0026 - IF "DESA=YES" IS DEFINED, PARAMETER "DATA=" MUST BE ALSO
DEFINED
Explanation |
When ESA Data Space shall be allocated, the size of the data
space must be defined.
|
Action |
Define the operand of keyword parameter
DATA .
|
CMP0027 - WITH AN ESA DATA SPACE REQUEST, PARAMETER "LIBR" MUST NOT
DEFINED
Explanation |
For a load pool (parameter LIBR is
defined), the request for ESA Data Space is disallowed and vice versa.
|
Action |
Correct the pool definition. |
CMP0028 - IF MACRO "ASHARE" SHALL BE USED, "PFIX=YES" MUST BE
DEFINED
Explanation |
When a module shall be loaded with macro ASHARE
into a load pool (LOAD=ASHARE ), PFIX=YES must be
defined.
|
Action |
Correct the operand of keyword parameter
PFIX .
|
CMP0029 - CMPSTART RUNS ONLY WITH BS2000 VERSION 10.0 AND UP
Explanation |
The execution of CMPSTART is not possible under
BS2000 with a version lower than 10.0.
|
Action |
None. |
CMP0030 - ERROR IN OPERATOR REQUEST, COMMAND NOT FOUND
Explanation |
The command from an operator request was invalid. |
Action |
Retry the request with a valid command. |
CMP0031 - Job variable name: ERROR FROM MACRO name,
R15=nn
Explanation |
During execution of the job variable, an error from macro
name has occurred. R15 contains the error number.
|
Action |
Contact Software AG Support. |