Text |
A non-zero response code was received from the database. |
Explanation |
The Natural error messages NAT3001 - NAT3999 deal with database response codes; that is, an error message "NAT3nnn" indicates that the database has replied to a command with a response code "nnn". The error may be caused by one of the following: - An invalid request was made to the database. - A malfunction occurred in the database. |
Action |
Retain the number of the response code and contact your database administrator. |
Text |
ISN list not sorted. DB/FNR/Subcode .../.../.... |
Explanation |
The following subcodes may be indicated: 1 An online SAVE operation requires a PLOG. 2 The selected record is not allowed. 3 S2 command did not have enough space. 4 S2/S9 internal program error. 5 System was not in save status at the end of an online ADASAV. |
Action |
Increase the ADARUN LS parameter value. |
Text |
Record not held. DB/Subcode .../.... |
Explanation |
ISNs could not be held because of insufficient space in the hold queue. |
Action |
Contact your database administrator. |
Text |
End-of-file detected. DB/FNR/Subcode .../.../.... |
Explanation |
The following subcodes may be indicated: 1 An end-of-file or end-of-list condition was detected (L3/L6 on a non-expanded file). 4 End of LOB value reached. An attempt was made to read a LOB value segment that begins after the end of the value. This response code/ subcode is given to an L1/L4 command with Command Option 2 set to L if the ISN Lower Limit value is greater than or equal to the length of the LOB value being read. 66 A program tried to read or change a multiclient file"s record using either a blank or incorrect-length owner ID, or an owner ID that is not allowed for the record. |
Action |
For more information, please refer to the Adabas documentation. |
Text |
The internal Adabas TRS storage directory is full. |
Explanation |
The internal Adabas TRS storage directory is full. |
Action |
Free some of the active queries. |
Text |
Sx command interrupted due to time limit. DB/FNR .../.... |
Explanation |
An Sx command has been interrupted because the maximum amount of time permitted has been exceeded. |
Action |
Contact your database administrator. |
Text |
Command interrupted to prevent WORK overflow. DB/FNR .../.... |
Explanation |
The command was interrupted to prevent a WORK overflow because of a pending backout operation. |
Action |
The value specified for the LP parameter might have to be increased. |
Text |
Last transaction backed out of database .... Subcode .... |
Explanation |
The last transaction has been backed out by Adabas because an Adabas time limit has been exceeded or because of a security violation. This error may also occur if an Adabas OP command is required (Adabas parameter OPENRQ=YES) but an Adabas command was issued without an OP command having been issued before. For the detailed reason see the subcode. |
Action |
Correct cause of time-out or security violation, and execute transaction again; or issue OP command correctly. |
Text |
Too many occurrences for periodic group. DB/FNR .../.... |
Explanation |
Too many occurrences for a periodic group. |
Action |
Check program and correct error. |
Text |
An error occurred in an MC call processing. DB/FNR .../.... |
Explanation |
An error occurred in an MC call during subcommand processing. |
Action |
Contact your database administrator. |
Text |
Invalid file number. DB/FNR/Subcode .../.../.... |
Explanation |
The file number was invalid. Possible causes are: - The file number was either 0 or greater than the maximum allowed. - The file was not in the database. - The file was locked. - A required Adabas system file was not loaded. Make sure that you use the correct file number. |
Action |
For more information, please refer to the Adabas documentation. |
Text |
Incorrect usage of file number. DB/FNR .../.... |
Explanation |
The file number was modified between successive L2/L5 calls. |
Action |
Check program and correct error. |
Text |
Update not permitted for access-only file. DB/FNR .../.... |
Explanation |
An attempt was made to update a file which was opened for access only. |
Action |
Check program and correct error. |
Text |
Incorrect entry made for a command ID value. DB/FNR .../.... |
Explanation |
One of the following incorrect entries was used for a command ID value: - binary zeros; - blanks; - the high-order byte contains the hexadecimal value "FF", but there is no automatic command ID generation; - the three high-order bytes contain the ASCII string "SYN". |
Action |
Check program and correct error. |
Text |
An invalid CID value was detected. DB/FNR/Subcode .../.../.... |
Explanation |
A time-out occurred because a command ID was not found. This program error can be caused by: - the CMD ID being assigned to another Lx command; - the CMD ID being assigned to another file; - the CMD ID was not found for an Sx command. |
Action |
Check program and correct error. For more information, please refer to the Adabas documentation. |
Text |
Invalid command .... DB/FNR/Subcode .../.../.... |
Explanation |
The command or command option is invalid. Some possible subcodes:
1/1005 Invalid command code.
2 Access-only user attempted to issue an update command.
18 ADALNK X"48" call logic has been suppressed.
21 Non-ET-logic user issued BT command.
52 A non-Adabas target was called.
1006/1007/1008 Invalid ACBX/ABD/ABD-type.
1010/1011 More than one value buffer/ISN buffer specified.
1012/1013 Number of search and value buffers/format and record
buffers do not match. |
Action |
Check program and correct error. For more information, please refer to the Adabas documentation. |
Text |
Invalid starting ISN specified. DB/FNR .../.... |
Explanation |
The starting ISN specified for an L2/L5 command sequence was invalid: - The ISN is not assigned to a record in the file. - The ISN was greater than the MAXISN in effect for the file. |
Action |
Check program and correct error. |
Text |
Invalid ISN in complex FIND SORTED statement. DB/FNR .../.... |
Explanation |
This error may be caused by one of the following: - The ISN list in the ISN buffer was already sorted. - The ISN list in the ISN buffer contained an invalid ISN. - The "D" option was specified when trying to sort by ISN. |
Action |
Check program and correct error, or contact your database administrator. |
Text |
ISN in ISN lower limit for S1/S4 not found. DB/FNR .../.... |
Explanation |
The ISN specified in ISN Lower Limit for an S1/S4 (or S2/S9) command was not found. |
Action |
Check program and correct error. |
Text |
Invalid ISN buffer length. DB/FNR/Subcode .../.../.... |
Explanation |
An invalid ISN buffer length for an S9 command was detected. The number of ISNs to be sorted as provided in ISN quantity is zero. Possible subcodes: 2 The ISN buffer of the S9 command contains ISNs that are higher than the TOP-ISN of the file. |
Action |
Check program and correct error. |
Text |
Search/value buffer overflow. DB/FNR/Subcode .../.../.... |
Explanation |
There was not enough work space available to either accommodate the combined sizes of the search and value buffers as indicated in the fields Search Buffer Length and Value Buffer Length, or generate the format translation. |
Action |
Check program and correct error. |
Text |
Invalid descriptor .... DB/FNR/Subcode .../.../.... |
Explanation |
A descriptor was invalid for an L3/L6 or S2/S9 command. The following subcodes may be indicated: 1 The field was not a descriptor. 2 The descriptor is contained within a periodic group. 3 The descriptor was changed between successive calls. 4 The Additions 1 field contained a different descriptor than the descriptor contained in the search buffer. 5 An initial L3/L6 call contains no trailing blanks in the Additions 1 field. |
Action |
Check program and correct error. For more information, please refer to the Adabas documentation. |
Text |
Incorrect value repositioning attempted. DB/FNR .../.... |
Explanation |
A value repositioning was attempted with an L3/L6 command (bytes 7-8 of the Additions 1 field contain spaces) and the Command Option 2 field did not contain the value "V". The command ID is released. |
Action |
Check program and correct error. |
Text |
An invalid command option has been detected. DB/FNR .../.... |
Explanation |
An invalid command option has been detected for the database ID / file number indicated in the error message. |
Action |
Either remove the invalid command option or replace it with a valid option. See the Adabas documentation for more information. |
Text |
Invalid function for non-cluster Adabas nucleus. DB/FNR .../.... |
Explanation |
The user/DBA attempted to perform a function for a non-cluster Adabas nucleus that is available only for an Adabas cluster database. |
Action |
Do not perform this function for this type of nucleus. |
Text |
Logically deleted descriptor used as search crit. DB/FNR .../... |
Explanation |
A logically deleted descriptor was used as a search criterion or was specified in the first two bytes of the Additions 1 field for an L3, L6, L9, S2, or S9 command. DB/FNR .../.... |
Action |
Remove the use of the logically deleted descriptor and inform your database administrator about the problem. |
Text |
Syntax error in format buffer. DB/FNR/Subcode .../.../.... |
Explanation |
The syntax error may be one of the following: - The terminating period was missing. - The first position contains a period. - Length and/or format was specified with a range definition. - An invalid element was detected. - The L9 descriptor name in the search buffer did not agree with the name in the format buffer. |
Action |
Check program and correct error. |
Text |
Error in format buffer. DB/FNR/Subc/Field .../.../.../.... |
Explanation |
The following subcodes may be indicated: 1 Spacing element nX with n=0 or n>255 not allowed. 2 Invalid sequence of format buffer elements was specified. 3 Specification errors in the format buffer. 4 A field name was undefined or not elementary. 5 Format without fields. 6 A group field cannot be specified if the group contains a LOB (LB) field. 7 A field name is undefined. 24 A phonetic, collation, or hyperdescriptor was specified. Further subcodes are described in the Adabas documentation. The message shows the name of the field being processed when the error was detected. |
Action |
Check program and DDM and correct error. |
Text |
Internal buffer too small. DB/FNR/Subcode .../.../.... |
Explanation |
A space problem occurred. The following are the subcodes and their meanings: 1 The Work pool was too small to store a user format. 2 The internal format buffer was too small to store a user format (translated into internal structure). |
Action |
Subcode 1: Increase the LWP specification and retry. Subcode 2: Increase the LFP specification and retry. |
Text |
Descriptor in format and search buffer not equal. DB/FNR .../.... |
Explanation |
The descriptor specified in the format buffer did not agree with the descriptor specified in the search buffer. |
Action |
Check program and correct error. |
Text |
Invalid format buffer. DB/FNR/Subcode .../.../.... |
Explanation |
The following subcodes may be indicated:
1/3 Invalid format for update operation, e.g. a conditional format
buffer with an update operation.
2/4 The L9"s format buffer format is not allowed for other commands.
5 Format used for L9 can only contain field and an optional daylight
savings time indicator (fldD).
6 Fixed point format must have length 2, 4, or 8.
7 Conditional format and more than one format buffer was specified.
8 The current Adabas call provides a different number of format
buffers than the format reference by CID.
9 Number of format buffer segments (ABDs) is zero. |
Action |
Check program and DDM and correct error. For more information, please refer to the Adabas documentation. |
Text |
Adabas internal format buffer space exceeded. DB/FNR .../... |
Explanation |
The Adabas internal format buffer space has been exceeded. Either the Adabas LWP parameter setting is too small, or the internal format buffer requires more than 2GB. For an explanation of this response code for non-mainframe databases, see the Adabas documentation. |
Action |
Contact your database administrator. |
Text |
Maximum value for Adabas NQCID exceeded. DB/FNR .../.... |
Explanation |
The maximum value for the Adabas parameter NQCID was exceeded. For an explanation of this response code for non-mainframe databases, see the Adabas documentation. |
Action |
Contact your Adabas administrator. |
Text |
Maximum value for Adabas parm NISNHQ exceeded. DB/FNR .../.... |
Action |
Contact your database administrator. |
Text |
Error during Open processing. DB/Subcode .../.... |
Explanation |
An error occurred during the processing of a command such as OP or N1. The default reason for this response code is that files are not available at open time. Other reasons are indicated by a subcode: 1 A specified file is locked against the requested use. 2 A specified file is currently in conflicting use. 4 The file is locked or in exclusive control by another user. 8 The user ID provided in the OP command is already assigned to another user. 11 A non-privileged user issued an open (OP) command to a nucleus that is in UTIONLY (utilities only) status. 17 The data of a specified file is not accessible. This can happen if a utility aborts or an autorestart fails. Further subcodes are described in the Adabas documentation. |
Action |
See the documentation for nucleus response codes, or contact your database administrator. |
Text |
Compressed record too long. DB/FNR/Subcode .../.../.... |
Explanation |
The compressed record was too long. It exceeds the maximum permitted record length for the file. The following subcodes may be indicated. 1 Multiple-value (MU) field. 2 Periodic (PE) group field. 3 MU field. 4 PE group. 5 PE group level. 6 Remaining fields. 10 Long alpha or wide field. Default message: File(s) not available at open time. Further subcodes are described in the Adabas documentation. |
Action |
Contact your database administrator. |