You can verify the successful installation of Natural Advanced Facilities by following the instructions provided in this section.
You can perform the following steps to determine whether Natural Advanced Facilities functions correctly.
To print a test report
In the appropriate logical printer, set the Disposition
to K
for testing.
Log on to the Natural system library SYSPOOL
and execute
the programs NTEST
and SPPTEST
. These programs
contain WRITE (1)
statements.
Or:
Create test reports with
Function
42 described in the Natural Advanced Facilities
documentation.
To proceed if a test report cannot be printed
Check that the CICS printer status is IN SERVICE
.
Use the CICS message switching transaction CMSG
to route
a message to the specified printer:
CMSG 'message',ROUTE=term-id,SEND
where term-id
is the terminal
identification of the CICS printer as specified in the TCT.
If Natural Security is installed, check whether logon error records
(of the NATSPOOL
spool server NATP
) have been written
to the Natural Security system file. The maintenance system for these error
records can be invoked by entering ERROR
in the command line of
Natural Security.
Check that the standard Natural LOGON
object has
not been replaced. The NATSPOOL
spool server
NATP
must be able to execute the SVPCIC01
module in
the SYSPRINT
library.
Also check whether the LOGON
user exit causes the
LOGON
of the spool server to SYSPRINT
to
terminate.
Check that the catalog dates of the objects in SYSPRINT
and SYSPOOL
are identical to one another.
Check that the parameters for the spool server match the Natural
Advanced Facilities environment. To do so, invoke MENU
in the
SYSPOOL
library and check the
CICS
Options defined with
Function
30.5 (see the Natural Advanced Facilities
documentation).
Check that neither the external security (EXTSEC
operand
of CICS PCT) nor the security levels (TRANSEC
operand of CICS PCT)
are defined for the spool server NATP
. This ensures that
NATP
can be initiated without security violations.
Check the TCT and VTAM definitions (see Step 10: Define Natural Advanced Facilities for Natural Security, Step 13: Define Natural Advanced Facilities for VTAM/SNA and Step 14: Define Natural Advanced Facilities for VTAM/non-SNA in the section Installing Natural Advanced Facilities under CICS).
Allocate a screen device instead of a printer device to the
Destination/Form
pairing of the first logical printer, execute
NTEST
in the SYSPOOL
library, and check for error
messages on the screen.
On certain devices, the CICS abend ATNI may occur.
Since the Natural Security logon processing checks whether the device is a printer, this test is only possible if Natural Security is not installed.
Start the transaction CEDF
for your terminal device and
check whether the command EXEC CICS START
(to start the spool
server) is executed.
Start the transaction CEDF
for your printer device
(CEDF
terminal ID of printer) and check which commands are
executed.
Check the Natural Advanced Facilities messages on the system operator console and/or in the log file (the destination of messages is defined with Function 30.5 (see the Natural Advanced Facilities documentation).
Console messages sent by the spool server start with:
NAF SP-SERV:
Console messages sent by the terminal task start with:
NAF-
Obtain a NATSPOOL
trace and check which Natural Advanced
Facilities modules are called, which Adabas commands are executed, and which
return codes are encountered.
To obtain an online NATSPOOL
trace by using the Natural
SYSRDC utility
Start a Natural session with the following dynamic parameters:
RDCSIZE=100, TRACE=(NATAM08), ITRACE=ON
Log on to the SYSRDC
library.
Execute the following command to select the internal trace type:
RDCSET N
Execute the following command to start the trace:
RDCSTART
Execute a program which creates a report, for example,
NTEST
in the SYSPOOL
library.
Log on to the SYSRDC
library.
Execute the following command to display the trace entries:
RDCDISP
You will now see when a NATSPOOL
module begins (marked
as BEG
) and ends (marked as END
) as well as its
return code in decimal representation.
After the execution of an Adabas call (marked as ADA
),
you will see the command code, the first byte of the command ID and the return
code in decimal representation.
For detailed information on the SYSRDC utility, see the Utilities documentation.
Errors that may occur during the check for printer availability:
Error | Description |
---|---|
INV REQU |
Invalid request |
INV ID |
Invalid ID |
INV ADDR |
Invalid address |
INV DEVC |
Invalid logical device code for page status |
ATI REQU |
ATI required on NON-ATI terminal |
RESO PRO |
Resource problem for inter-partition session |
INV PROG |
Invalid program name |
UNAB PER |
Unable to perform request |
INV TYPE |
Type is not LUC |
RESO QUI |
Resource quiesced by TMP |
LOCATERR |
Any error different from those listed above |
Errors that may occur during the start of the spool server:
Error | Description |
---|---|
TERMIDER |
Terminal ID error |
TRANIDER |
Transaction ID error |
SYSIDERR |
SYSID error
|
INVREQ |
Invalid request |
IOERR |
I/O error |
LENGERR |
Length error |
ISCINVRE |
ISC invalid request |
NOTAUTH |
Not authorized |
STARTERR |
Any error different from those listed above |
Messages that may occur during the initialization of
NATSPOOL
:
Message | Text |
---|---|
NAF-01C |
ADABAS RCxxx,
DBIDxxx, FNRxxx, AT
OPEN |
NAF-02C |
Not used |
NAF-03C |
ADABAS RCxxx,
DBIDxxx, FNRxxx, AT READ
REPORT |
NAF-04C |
ADABAS RCxxx,
DBIDxxx, FNRxxx, AT READ
PRINTER |
NAF-05C |
ADABAS RCxxx,
DBIDxxx, FNRxxx, AT
CLOSE |
NAF-06C |
ADABAS RCxxx,
DBIDxxx, FNRxxx, AT
UPDATE REPORT |
NAF-07C |
ADABAS RCxxx,
DBIDxxx, FNRxxx, AT
UPDATE PRINTER |
NAF-08I |
REPORT xxxxxxxxx ,
JOBxx.xxx , SET -TO BE
PRINTED- |
NAF-09I |
PRINTER xxxx SET
-FREE- |
NAF-10I |
PRINTER xxxx RESTARTS IN 20
SECONDS, DEST=xxxxxxxx,
FORM=x |
NAF-11C |
RESTART ERROR NAT xxxx ON
PRINTER xxxx |
See the online help for descriptions of the NATSPOOL
print
server messages.
To invoke online help for print server messages
In the PF1.
, pressEnter function code 99
(miscellaneous information).
Enter function code 4
(Natural Advanced Facilities
SP-SERV
messages from spool server).
Abend Code | Reason | Action |
---|---|---|
NAF1 - INVALID LENGTH |
The length of the data to be printed is not positive. | Obtain the dump and contact Software AG technical support. |
NAF2 - INVALID LENGTH |
The length of the data to be printed is greater
than the maximum length of the terminal I/O buffer
(TIOBM ).
|
Obtain the dump and contact Software AG technical support. |
NAF3 - INVALID RETURN
CODE |
The return code of the task-end routine
CMTSKND is not zero.
|
Obtain the dump and contact Software AG technical support. |
NAF4 - INVALID RETURN CODE |
The return code of the print routine
CMWTERM is not zero.
|
Obtain the dump and contact Software AG technical support. |