Natural under IMS TM Error Messages
This section lists the error messages (NIInnnn messages) that may be
issued by the Natural IMS TM Interface.
Error texts are not issued for errors of the types "abend"
and "abend with dump", and not in a server environment. When a
server environment is used, the error code is returned to the caller in
Register 15.
For information on the Natural IMS TM Interface, see
Natural under IMS
TM in the TP Monitor Interfaces
documentation.
NII3500
| Type |
Abend with user abend code U3500 with dump
|
| Issuing Module |
CONV/NONC/NTRD driver
|
| Reason |
You are not allowed to execute a driver of type
CONV, NONC or NTRD in a BMP region.
|
| Action |
Check your installation. |
NII3501
| Type |
Abend with user abend code U3501 with
dump
|
| Issuing Module |
BMP driver |
| Reason |
You are not allowed to execute a driver of type BMP in an MPP
region.
|
| Action |
Check your installation. |
NII3502
| Type |
Abend with user abend code U3502 with
dump
|
| Issuing Module |
NIIMPP
|
| Reason |
The GU against the message queue failed. |
| Action |
Check the status code contained in register 15. |
NII3503
| Type |
Abend with user abend code U3503 with
dump
|
| Issuing Module |
All drivers |
| Reason |
Unable to load the Natural IMS TM Interface module. |
| Action |
Check the NIINAME parameter of the driver and/or
the steplib concatenation of the region.
|
NII3505
| Type |
Abend with user abend code U3505 with
dump
|
| Issuing Module |
All drivers. |
| Reason |
The entry within the transaction code table could not be
located.
|
| Action |
Check your transaction code table. |
NII3506
| Type |
Abend with user abend code U3506 with dump
|
| Issuing Module |
All drivers. |
| Reason |
The entry within the NII parameter module could not be
located.
|
| Action |
Check the transaction code table and/or environment table.
|
NII3507
| Type |
Error |
| Issuing Module |
NIIMPP
|
| Reason |
The GN against the message queue failed. |
| Action |
Check the status code contained in the message. |
NII3508
| Type |
Error |
| Issuing Module |
NIIMPP
|
| Reason |
The received input message is greater than the input message
buffer.
|
| Action |
Increase the size of the input message buffer in your
environment table.
|
NII3509
| Type |
Error |
| Issuing Module |
NIIINITS
|
| Reason |
The session start exit NIIXSSTA requested that
the Natural session be terminated abnormally.
|
| Action |
Check the return code contained in the message. |
NII3510
| Type |
Abend with user abend code U3510 with
dump
|
| Issuing Module |
NIIMPP
|
| Reason |
The ISRT of the termination message failed.
|
| Action |
Check the status code contained in Register 15. |
NII3511
| Type |
Abend with user abend code U3511 with dump
|
| Issuing Module |
NIIMPP
|
| Reason |
The ISRT of the SPA failed.
|
| Action |
Check the status code contained in Register 15. |
NII3512
| Type |
Abend with user abend code U3512 with dump
|
| Issuing Module |
NIIBMP, NIICONV,
NIINONC, NIINTRD, NIISFE,
NIISRVD
|
| Reason |
Unable to find the NTIMSPT macro in the Natural
parameter module or the NIITRTAB transaction code table module.
|
| Action |
Either specify at least one NTIMSPT macro in the
Natural parameter module, or include the NIITRTAB transaction code
table in the link to the Natural IMS TM Interface module.
|
NII3513
| Type |
Abend with user abend code U3513 with dump
|
| Issuing Module |
All drivers |
| Reason |
The storage for the working area, the buffers or the Natural
thread could not be obtained.
|
| Action |
Check the reason code contained in Register 15 and/or increase
the size of your region.
|
NII3515
| Type |
Error with dump |
| Issuing Module |
NIIBTCH, BMP driver
|
| Reason |
Open failed. |
| Action |
Check your BMP JCL for the DD name contained in the message.
|
NII3517
| Type |
Error |
| Issuing Module |
NIIOLDSN
|
| Reason |
The session resume exit NIIXSTAR requested that
the Natural session be terminated abnormally.
|
| Action |
Check the return code contained in the message. |
NII3518
| Type |
Abend with user abend code U3518 with dump
|
| Issuing Module |
NIISRTQ
|
| Reason |
The CHNG call for the printer destination
specified with the Natural profile parameter
SENDER
failed.
|
| Action |
Check the status code contained in Register 15. Probably an
invalid printer destination was specified.
|
NII3519
| Type |
Abend with user abend code U3519 with dump
|
| Issuing Module |
NIIISRTQ
|
| Reason |
The ISRT call to the assigned printer destination
failed.
|
| Action |
Check the status code contained in Register 15. |
NII3520
| Type |
Abend with user abend code U3520 with dump
|
| Issuing Module |
NIIISRTQ
|
| Reason |
The PURG call for the assigned printer
destination failed.
|
| Action |
Check the status code contained in Register 15. |
NII3521
| Type |
Abend with user abend code U3521 with dump
|
| Issuing Module |
BMP driver |
| Reason |
Either Natural terminated with a bad return code or an NII
error occurred and you requested an abend.
|
| Action |
If the abend is caused by a Natural error,
CMPRINT contains the error message. If the abend is caused by a
Natural under IMS error, a WTO with the error message has been issued before.
|
NII3522
| Type |
Error |
| Issuing Module |
NIIMPP
|
| Reason |
The SPA is greater than the size specified for the SPA buffer.
|
| Action |
Check the environment table. |
NII3523
| Type |
Error |
| Issuing Module |
NIIBTCH
|
| Reason |
The storage for the back-end program area could not be
allocated.
|
| Action |
Check the TERMINATE statement and/or increase the
size of your BMP region.
|
NII3524
| Type |
Error with dump |
| Issuing Module |
NIIBTCH
|
| Reason |
The back-end program could not be loaded. |
| Action |
Check the name of the back-end program contained in the
message and/or the steplib concatenation of your region.
|
NII3525
| Type |
Abend with user abend code U3525 with dump
|
| Issuing Module |
NIIDRIV
|
| Reason |
The save area stack is exhausted. |
| Action |
Contact Software AG Support. |
NII3527
| Type |
Error |
| Issuing Module |
NIIMPP
|
| Reason |
You specified RELO=FORCE, but there is
insufficient memory for a new thread. RELO=FORCE will cause
storage allocation for a second thread, if the first allocated thread is at the
same storage location as the thread used before the terminal I/O.
|
| Action |
Increase the size of your region. |
NII3530
| Type |
Abend with user abend code U3530 |
| Issuing Module |
NIIBOOTS, CONV/NONC driver
|
| Reason |
Unable to obtain our name/token pair. |
| Action |
Check the return code contained in Register 15 and/or the
steplib concatenation of your region.
|
NII3531
| Type |
Error |
| Issuing Module |
NIIBOOTS
|
| Reason |
Unable to load the driver. |
| Action |
Check the return code contained in Register 15 and/or the
steplib concatenation of your region.
|
NII3600
| Type |
Error |
| Issuing Module |
NIIVTRTA
|
| Reason |
Transaction type does not match driver type. For example, you
specified transaction code conversational in the transaction code table but the
driver type is non-conversational and vice versa.
|
| Action |
Check the transaction code table. |
NII3601
| Type |
Error |
| Issuing Module |
NIIVTRTA
|
| Reason |
The SPA is too small. The SPA must be at least 157 bytes plus
the offset of the Natural reserved area defined in the transaction table.
|
| Action |
Check the transaction code table and/or increase the size of
the SPA.
|
NII3602
| Type |
Error |
| Issuing Module |
NIIVTRTA
|
| Reason |
IOPCB is the only PCB in the PSB. At least one additional PCB
is required.
|
| Action |
Check your PSB. |
NII3604
| Type |
Error |
| Issuing Module |
NIIVTRTA
|
| Reason |
Not enough alternate TP PCBs. The PSB does not contain the
number of alternate modifiable TP PCBs specified in the transaction code table
as additional work PCBs.
|
| Action |
Check your transaction code table and/or your PSB. |
NII3605
| Type |
Error |
| Issuing Module |
NIIVTRTA
|
| Reason |
Message PCB is not a modifiable alternate TP PCB. You
specified a separate message PCB in the transaction code table, but your PSB
does not contain enough modifiable alternate TP PCBs.
|
| Action |
Check your transaction code table and/or your PSB. |
NII3607
| Type |
Error |
| Issuing Module |
NIIVTRTA
|
| Reason |
The PCB number specified for the logical PCB name is greater
than the maximum number of PCBs.
|
| Action |
Check your transaction code table and/or your PSB for the PCB
name contained in the message.
|
NII3611
| Type |
Error |
| Issuing Module |
NIIINITS
|
| Reason |
The user exit NIIXRFNU returned a roll file
number not in the range of 1 to the total available number of roll files as
defined in the environment table, that is, larger than the total number of
allowed roll files.
|
| Action |
Correct the user exit. |
NII3612
| Type |
Error with dump |
| Issuing Module |
NIIDRIV
|
| Reason |
The roll server ALLOC request failed. The message
contains the return code/reason code.
|
| Action |
Contact Software AG Support. |
NII3613
| Type |
Error |
| Issuing Module |
NIIDRIV
|
| Reason |
The roll server ALLOC request failed because the
roll file is full.
|
| Action |
Increase the size of the roll file or increase the number of
roll files.
|
NII3614
| Type |
Error |
| Issuing Module |
NIIDRIV, NIIOLDSN,
NIIENDSN, NIIWTERM
|
| Reason |
The roll server is not active. |
| Action |
Check the roll server status and restart the roll server.
|
NII3620
| Type |
Error with dump |
| Issuing Module |
NIIOLDSN
|
| Reason |
Error during address relocation. The message contains the
NATRELD return code.
|
| Action |
Contact Software AG Support. |
NII3621
| Type |
Error |
| Issuing Module |
NIIOLDSN
|
| Reason |
An IPL has occurred since the start of the Natural session and
TERMIPL=ON is specified in the environment table.
|
| Action |
Restart your session. |
NII3623
| Type |
Error |
| Issuing Module |
NIIOLDSN
|
| Reason |
Another Natural product version has been installed by the
Natural system administrator since the start of the Natural session. All active
Natural sessions are terminated.
|
| Action |
Restart your session. |
NII3624
| Type |
Error with dump |
| Issuing Module |
NIIOLDSN
|
| Reason |
A wrong user thread has been rolled in. |
| Action |
Contact Software AG Support. |
NII3626
| Type |
Error |
| Issuing Module |
NIIOLDSN
|
| Reason |
The roll files used by the roll server have been reformatted
by the Natural system administrator since the start of the Natural session. All
active Natural sessions are lost.
|
| Action |
Restart your session. |
NII3627
| Type |
Error with dump |
| Issuing Module |
NIIOLDSN
|
| Reason |
The roll server READ request failed. The message
contains the return code/reason code.
|
| Action |
Contact Software AG Support. |
NII3628
| Type |
Error |
| Issuing Module |
NIIDRIV, NIIOLDSN,
NIIENDSN, NIIWTERM
|
| Reason |
The Natural system administrator has purged the Natural session
from the roll server using the SYSTP utility or the application
programming interface USR3002N.
This error may also occur in the following scenario:
A Natural session has been suspended by IMS TM (due to an
unavailable resource) and you have started a new Natural session at the same
LTERM. If later on the suspended Natural session is re-scheduled by IMS TM, the
suspended Natural session is cancelled with this error.
|
| Action |
Restart your session. |
NII3629
| Type |
Error |
| Issuing Module |
NIIOLDSN
|
| Reason |
The IMS TM user who is currently logged on at the IMS TM LTERM
is different to the user who started the IMS TM conversation at this LTERM. For
security reasons, the IMS TM conversation (and the corresponding Natural
session) is terminated.
|
| Action |
Restart your session. |
NII3630
| Type |
Error |
| Issuing Module |
NIIMSESS
|
| Reason |
The MSPCB specified in the transaction code table does not
address the multiple-session database.
|
| Action |
Check your transaction code table and/or your PSB. |
NII3631
| Type |
Error with dump |
| Issuing Module |
NIIMSESS
|
| Reason |
Access to the multiple-session database failed. |
| Action |
Check the status code contained in the message. |
NII3632
| Type |
Error with dump |
| Issuing Module |
NIIMSESS
|
| Reason |
The entry for the transaction code to be resumed could not be
found in the transaction code table.
|
| Action |
Contact Software AG Support. |
NII3633
| Type |
Error with dump |
| Issuing Module |
NIIMSESS
|
| Reason |
The ISRT call for the SPA or the message failed.
|
| Action |
Check the status code contained in the message. |
NII3634
| Type |
Error with dump |
| Issuing Module |
NIIMSESS
|
| Reason |
The CHNG call for the transaction code to be
resumed failed.
|
| Action |
Check the status code contained in the message and/or contact
Software AG Support.
|
NII3635
| Type |
Error with dump |
| Issuing Module |
NIIMSESS
|
| Reason |
The multiple-session prefix could not be built due to an
illegal character in the terminal name. Register 2 of the error registers in
the dump points to the illegal character.
|
| Action |
Check the terminal name and/or use the NIIXMSSP
exit.
|
NII3636
| Type |
Error with dump |
| Issuing Module |
NIIMSESS
|
| Reason |
An invalid return code was received from the
NIIXMSSP exit. Register 2 of the error registers in the dump
contains the return code.
|
| Action |
Check your exit. |
NII3640
| Type |
Error with dump |
| Issuing Module |
NIIPFAM
|
| Reason |
Unexpected status code for the CHNG call.
|
| Action |
Check the status code contained in the message and/or contact
Software AG Support.
|
NII3641
| Type |
Error with dump |
| Issuing Module |
NIIPFAM
|
| Reason |
Unexpected status code on the ISRT call.
|
| Action |
Check the status code contained in the message and/or contact
Software AG Support.
|
NII3642
| Type |
Error with dump |
| Issuing Module |
NIIPFAM
|
| Reason |
Unexpected status code on the PURG call.
|
| Action |
Check the status code contained in the message and/or contact
Software AG Support.
|
NII3650
| Type |
Error |
| Issuing Module |
NIICDBPC
|
| Reason |
Database not available and TERMDB=YES is
specified in the environment table.
|
| Action |
Start the database. |
NII3651
| Type |
Error |
| Issuing Module |
NIICDBPC
|
| Reason |
The PROCOPT option in the PCB is set to update
but the database is not available for update and TERMDB=YES is
specified in the environment table.
|
| Action |
Check the database. |
NII3652
| Type |
Abend with user abend code U3652 |
| Issuing Module |
NIIINQYE
|
| Reason |
The INQY ENVIRON call failed. Register 15
contains the return code in bytes 0 and 1 and the reason code in bytes 2 and 3.
|
| Action |
Contact Software AG Support. |
NII3661
| Type |
Error with dump |
| Issuing Module |
NIIWTERM
|
| Reason |
Error during release of programs. The message contains the
NATRELSE return code.
|
| Action |
Contact Software AG Support. |
NII3662
| Type |
Error with dump |
| Issuing Module |
NIIWTERM
|
| Reason |
The ISRT call to the alternate PCB for the SPA
failed.
|
| Action |
Check the status code contained in the message. |
NII3663
| Type |
Error with dump |
| Issuing Module |
NIIWTERM
|
| Reason |
The ISRT call to the alternate PCB for the
message failed.
|
| Action |
Check the status code contained in the message. |
NII3664
| Type |
Abend with user abend code U3664 with dump
|
| Issuing Module |
NIIWTERM
|
| Reason |
The ISRT call for the SPA failed.
|
| Action |
Check the status code in Register 15. |
NII3665
| Type |
Abend with user abend code U3665 with
dump
|
| Issuing Module |
NIIWTERM
|
| Reason |
The ISRT call for the message failed.
|
| Action |
Check the status code in Register 15. |
NII3666
| Type |
Error |
| Issuing Module |
NIIWTERM
|
| Reason |
The compressed thread exceeds the local roll buffer slot size
or roll file slot size. The message contains the compressed thread size.
|
| Action |
Increase the local roll buffer slot size if you use the roll
server without a roll file, else increase the roll file slot size.
|
NII3668
| Type |
Error with dump |
| Issuing Module |
NIIWTERM
|
| Reason |
Roll server WRITE request failed. The message
contains the return code/reason code.
|
| Action |
Contact Software AG Support. |
NII3669
| Type |
Error |
| Issuing Module |
NIIWTERM
|
| Reason |
You tried to switch to a non-Natural session using a Natural
transaction code.
|
| Action |
Correct the application. |
NII3670
| Type |
Error |
| Issuing Module |
NIIWTERM
|
| Reason |
You can not switch directly from a non-conversational
transaction code to a conversational one.
|
| Action |
Correct the application. |
NII3671
| Type |
Error with dump |
| Issuing Module |
NIIWTERM
|
| Reason |
The CHNG call for the transaction switch failed.
The message contains the first five bytes of the transaction code and the
status code.
|
| Action |
Check the status code and/or correct the application. |
NII3672
| Type |
Error |
| Issuing Module |
NIIWTERM
|
| Reason |
Direct switch to a non-existent transaction code. |
| Action |
Check your transaction code or IMSGEN.
|
NII3673
| Type |
Abend with user abend code U3673 with
dump
|
| Issuing Module |
NIIWTERM
|
| Reason |
Deferred switch to a non-existent transaction code. |
| Action |
Check your transaction code or IMSGEN.
|
NII3680
| Type |
Error |
| Issuing Module |
NIISIPSS
|
| Reason |
The subsystem entry for SPATID could not be
located. The message contains the subsystem ID as specified in the environment
table.
|
| Action |
Check your subsystem in your environment table and/or verify
that the Authorized Services
Manager is started.
|
NII3682
| Type |
Error |
| Issuing Module |
NIISIPSS
|
| Reason |
The session information pool (SIP) is full. |
| Action |
Restart the Authorized Services Manager with an increased
number of SIP slots. For further information, see
Authorized Services
Manager in the Operations
documentation.
|
NII3683
| Type |
Error |
| Issuing Module |
NIISIPSS
|
| Reason |
The Authorized Services Manager is not active. The Authorized
Services Manager must be active if the terminal-oriented non-conversational
environment is used.
|
| Action |
Start the Authorized Services Manager. For further
information, see Authorized
Services Manager in the Operations
documentation.
|
NII3684
| Type |
Error |
| Issuing Module |
NIISIPSS
|
| Reason |
The SIP function of the Authorized Services Manager is
disabled. The SIP function must be active if the terminal-oriented
non-conversational environment is used.
|
| Action |
Start the Authorized Services Manager with the SIP function
enabled as described in the section Authorized Services
Manager in the Operations
documentation.
|
NII3685
| Type |
Error with dump |
| Issuing Module |
NIISIPSS
|
| Reason |
The Authorized Services Manager SIP function failed. The
message contains the return and the reason code.
|
| Action |
For further information on the return/reason codes see the
section Authorized Services
Manager in the Operations
documentation. If necessary, contact Software AG Support.
|
NII3686
| Type |
Error |
| Issuing Module |
NIISIPSS
|
| Reason |
The size of the SPA buffer is greater than the SIP slot size.
|
| Action |
Increase the SIP slot size as described in the section
Authorized Services
Manager in the Operations
documentation.
|
NII3690
| Type |
Error |
| Issuing Module |
NIIDRIV, NIIOLDSN,
NIISIPSM
|
| Reason |
The subsystem entry could not be located. The message contains
the subsystem ID as specified with the Natural profile parameter
SUBSID.
|
| Action |
Check your subsystem in the Natural parameter module and/or
verify that the roll server or (only if monitoring is used) the
Authorized Services Manager is
started.
|
NII3692
| Type |
Error with dump |
| Issuing Module |
NIIENDSN
|
| Reason |
The roll server FREE request failed. The message
contains the return code/reason code.
|
| Action |
Contact Software AG Support. |
NII3800
| Type |
Error with dump |
| Issuing Module |
NIIBDAMR
|
| Reason |
DCB not allocated for one of the roll files. The message
contains the DD name of the roll file.
|
| Action |
Contact Software AG Support. |
NII3801
| Type |
Error |
| Issuing Module |
NIIBDAMR
|
| Reason |
The OPEN of the roll file failed.
|
| Action |
Check your region JCL for the DD name contained in the
message.
|
NII3802
| Type |
Error with dump |
| Issuing Module |
NIIBDAMR
|
| Reason |
Invalid function code for NIIBDAMR.
|
| Action |
Contact Software AG Support. |
NII3803
| Type |
Error |
| Issuing Module |
NIIBDAMR
|
| Reason |
No free slot in roll file. The message contains the DD name of
the roll file.
|
| Action |
Increase the size of your roll file. |
NII3804
| Type |
Error |
| Issuing Module |
NIIBDAMR
|
| Reason |
The roll file has been reformatted by the Natural system
administrator since the start of the Natural session. All active Natural
sessions are lost.
|
| Action |
Restart the session. |
NII3805
| Type |
Error |
| Issuing Module |
NIIBDAMR
|
| Reason |
The roll file has been formatted with a Natural version that
is incompatible to the Natural version used by the current Natural session.
This error typically indicates that the roll file has been formatted with a
Natural roll file initialization module of a newer Natural version.
|
| Action |
Reformat the roll file with the Natural roll file
initialization module of the correct Natural version.
|
NII3810
| Type |
Error with dump |
| Issuing Module |
NIISEOS
|
| Reason |
The CHNG call failed.
|
| Action |
Check the status code contained in the message. |
NII3811
| Type |
Error |
| Issuing Module |
NIISEOS
|
| Reason |
You tried to switch from a non-conversational Natural session
to a conversational one.
|
| Action |
Check your application. |
NII3812
| Type |
Error with dump |
| Issuing Module |
NIISEOS
|
| Reason |
The ISRT call for the message into the alternate
PCB failed.
|
| Action |
Check the status code contained in the message. |
NII3813
| Type |
Error with dump |
| Issuing Module |
NIISEOS
|
| Reason |
The ISRT call for the SPA into the alternate PCB
failed.
|
| Action |
Check the status code contained in the message. |
NII3814
| Type |
Error |
| Issuing Module |
NIISEOS
|
| Reason |
The ISRT call for the dummy message failed.
|
| Action |
Check the status code contained in the message. |
NII3815
| Type |
Abend with user abend code U3815 with dump
|
| Issuing Module |
NIISEOS
|
| Reason |
The ISRT call for the SPA into the IOPCB failed.
|
| Action |
Check the status code contained in Register 15. |
NII3816
| Type |
Error |
| Issuing Module |
NIISEOS
|
| Reason |
You tried to switch to a non-existent transaction code.
|
| Action |
Check your transaction code or IMSGEN.
|
NII3820
| Type |
Error |
| Issuing Module |
NIISIPSM
|
| Reason |
The Authorized Services Manager is not active. The Authorized
Services Manager must be active if the monitoring function is used.
|
| Action |
Start the Authorized Services Manager as indicated in the
section Authorized Services
Manager in the Operations
documentation.
|
NII3821
| Type |
Error |
| Issuing Module |
NIISIPSM
|
| Reason |
The SIP function of the Authorized Services Manager is
disabled. The SIP function must be active if the monitoring function is used.
|
| Action |
Start the Authorized Services Manager with the enabled SIP
function as indicated in the section Authorized Services
Manager in the Operations
documentation.
|
NII3822
| Type |
Error with dump |
| Issuing Module |
NIISIPSM
|
| Reason |
An unexpected return code was received from the SIP function
of the Authorized Services Manager. The message contains the return code and
the reason code.
|
| Action |
For the return codes, see the section
Authorized Services
Manager in the Operations
documentation. If necessary, contact Software AG Support.
|
NII3823
| Type |
Error |
| Issuing Module |
NIISIPSM
|
| Reason |
The SIP server pool is full. |
| Action |
Increase the number of SIP slots in the Authorized Services
Manager as indicated the section Authorized Services
Manager in the Operations
documentation.
|
NII3830
| Type |
Abend with user abend code U3830 with dump
|
| Issuing Module |
NIIACT
|
| Reason |
The CMD command failed when issuing
the /LOG command to write the accounting record. The
transaction code must be authorized to use the /LOG
command when ACTLOG=LOG is set for accounting.
|
| Action |
Check the status code contained in Register 15. |
NII3831
| Type |
Abend with user abend code U3831 with
dump
|
| Issuing Module |
NIIACT
|
| Reason |
The /LOG command failed when writing the
accounting record.
|
| Action |
Check the status code contained in Register 15. |
NII3832
| Type |
Abend with user abend code U3832 with
dump
|
| Issuing Module |
NIIACT
|
| Reason |
The Authorized Services Manager failed when writing the
accounting record to SMF.
|
| Action |
Check the status/reason code contained in Register 15.
|
NII3950
| Type |
Error with dump |
| Issuing Module |
NIIESTAE
|
| Reason |
A system abend code has been intercepted. |
| Action |
Examine the dump. |
NII3951
| Type |
Error with dump |
| Issuing Module |
NIIESTAE
|
| Reason |
A recursive system abend code has been intercepted. |
| Action |
Examine the dump. |
NII3960
| Type |
Error |
| Issuing Module |
CMGETMSG, NIGETMSG
|
| Reason |
The retrieved message exceeds the specified size of the input
message buffer.
|
| Action |
Increase the size of your input message buffer. |
NII3961
| Type |
Error |
| Issuing Module |
CMGETSEG, CMGSEGO
|
| Reason |
The segment received does not fit into the input message
buffer.
|
| Action |
Increase the size of the input message buffer. |
NII3962
| Type |
Abend with user abend code U3962 |
| Issuing Module |
CMSVC13D, NIIU3962
|
| Reason |
The Natural session has been abended on request. |
| Action |
Contact the application developer. |
NII3963
| Type |
Error |
| Issuing Module |
CMSTCKSY
|
| Reason |
The synchronized STCK value could not be
obtained.
|
| Action |
Contact the system administrator. |
NII4093
| Type |
Error with dump |
| Issuing Module |
NIIERROR
|
| Reason |
An unknown error has occurred. The message contains the
original error number. This error may happen if the reported error number is
not contained in the error message file NIIMSGT.
|
| Action |
Contact Software AG Support. |
