This document describes the service modules of the Natural IMS TM Interface.
The following topics are covered:
CMDEFSW - Deferred Transaction Switch to Natural Transaction Code
CMDEFSWX - Deferred Transaction Switch to Non-Natural Transaction Code
CMDIRNMX - Switch to Another Conversational Transaction w/o Message
CMDIRNMZ - Switch to Another Conversational Transaction w/o Message
CMDIRSWX - Switch to Another Conversational Transaction w. Message
CMDIRSWZ - Switch to Another Conversational Transaction w. Message
Service modules perform IMS TM-specific functions. They can be called
from within a Natural program using the standard Natural CALL
interface. Sample programs are loaded by a Natural INPL into the
library SYSEXTP.
This section contains a detailed description of all the service modules in alphabetical order. This includes a list of the parameters available and the name of the module-relevant sample program.
The module CMCMMND issues IMS TM operator commands and
returns the reply segments to the Natural user program.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Command |
Input | ||
Command length |
(B4) | Input | |
Reply |
Output | ||
Length of reply area |
(B4) | Input |
The operator command contained in the command area is issued to IMS TM with the indicated length.
If the user has set a non-zero reply length, any reply segments from IMS
TM are moved into the reply area over the maximum available length. If the
reply area is at least two bytes long, the first two bytes contain the IMS TM
status code after the command call has been issued. The two rightmost bytes of
the REPLGTH field contain the effective length of the total reply
moved into the REPLY field.
If the reply from IMS TM has to be truncated, this is indicated by
setting X'80' in the leftmost byte of the REPLGTH
field.
Sample Program: NIPSCMND
The module CMDEFSW performs a deferred transaction switch
to a Natural transaction code.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Trancode |
Input |
With the next terminal I/O, the output is sent to the terminal and the next input from this terminal is processed by the transaction code passed as parameter message.
The module CMDEFSWX performs a deferred switch to a
non-Natural transaction code.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Trancode |
Input | ||
Message |
Input | ||
Message length |
Input | ||
MOD name |
Input |
With the next terminal I/O, the given message with the given
MOD name is inserted and the Natural session is
terminated.
If the new transaction code is a Natural transaction code, the message
and the MOD name passed as parameters are ignored and
CMDEFSWX works as CMDEFSW.
Sample Programs: NIPSDEFX.
The module CMDIRNMX has the same functionality as
CMDIRSWX, except that no
message is inserted to the alternate PCB. Thus, the only parameter you have to
provide is Trancode.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
| Trancode | Input |
CMDIRNMX can also be used to perform a direct switch to
another Natural transaction code, because in this case, the CLEAR
key is given as input message to Natural by default.
If you want to switch to a non-Natural transaction code, it is strongly
recommended to use the TERMINATE statement in conjunction with
service module CMTRNSET
instead.
CALL 'CMTRNSET' TRANCODE /* set transaction code */ TERMINATE /* terminate Natural and call TRANCODE */
The module CMDIRNMZ has the same functionality as
CMDIRSWZ, except that no
message is inserted to the alternate PCB. Thus, the only parameter you have to
provide is Trancode.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Trancode |
Input |
The module CMDIRSWX performs a direct switch to another
conversational transaction and specifies a message that is to be passed on to
this new transaction.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Trancode |
Input | ||
Message |
Input | ||
Message length |
(B4) | Input |
At the next terminal I/O, a change call is executed against the
alternate PCB to set its destination to the value of the
Trancode field. The SPA and the message are then
inserted into the alternate PCB.
The new transaction code is checked if it is a Natural or a non-Natural transaction code.
In the case of a non-Natural transaction code, the Natural session is terminated.
In the case of a Natural transaction code, the CLEAR key is passed to Natural as input message, which means that Natural reacts as if the terminal user pressed the CLEAR key. The type of the new transaction code is automatically honored.
If you want to switch to a non-Natural transaction code, it is strongly
recommended to use the TERMINATE statement in conjunction with
service module CMTRNSET
instead.
CALL 'CMTRNSET' TRANCODE /* set transaction code */ TERMINATE 0 MESSAGE /* terminate Natural and call TRANCODE with MESSAGE */
The message MESSAGE is passed in the length of the Natural variable
Message to the transaction code
Trancode. The return code of the
TERMINATE statement
must be zero. Otherwise, the Natural session is terminated with termination
error message NAT9987 and the transaction code switch does not take place.
Sample Program: NIPSDIRX
The module CMDIRSWZ has the same functionality as
CMDIRSWX.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Trancode |
Input | ||
Message |
Input | ||
Message length |
(B4) | Input |
The difference compared to CMDIRSWX is that, in case of a
switch to a non-Natural transaction code, the current Natural session is not
terminated. This is done with the following intention:
A given Natural session gives control to a non-Natural transaction code; the session is not terminated.
The non-Natural transaction performs a terminal I/O and then switches back to the original Natural transaction, passing data into the SPA.
The Natural transaction does not start a new session, but continues the old session were it has left it, which means that the roll slot is obtained from the swap pool and control is given to Natural so as to continue with an existing session.
The non-Natural transaction code must pass the message
LLZZD, where LL=H'0005', ZZ=X'0000' and
D=X'6D' are simulating to Natural that the CLEAR key
has been pressed. By making the Natural program sensitive to the
CLEAR key, it is able to recognize that the called non-Natural
transaction has come back and it can retrieve the data prepared by the
non-Natural transaction for use in subsequent processing.
CMDIRSWZ cannot be used if the transaction code to switch
to is a Natural transaction code.
Sample Program: NIPSDIFS
The module CMDISPCB is used to obtain the contents of a
PCB.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
PCB number |
(B4) | Input | |
Receiving area |
Output | ||
Area length |
(B4) | Input |
After the call is executed, the receiving area contains the contents of
the PCB with the requested number in the requested length. A check is made to
verify that the requested PCB is within your current PCB list. The first PCB is
PCB number 1, the second PCB is PCB number 2, etc. If you specify an invalid
number, the field PCB number is set to
X'FFFFFFFF' and no further information is passed to your
application program.
Sample Program: NIPSPCBD
The module CMEMOD allows the MOD
name to be modified dynamically for a given LTERM at
the normal end of a Natural session.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
MOD name |
(A8) | Input |
At a normal end of a session, the environment-dependent interface
inserts the message X'00060000403F' into the IOPCB, using the MOD
name whose value is contained in MOD name parameter.
This is intended to present a meaningful screen (for example, a general menu)
to the terminal user so that he can continue working at the terminal.
The module CMGETMSG reads the next message from the message
queue.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Message area |
Output | ||
Message area length |
(B4) | Input |
The length is checked to see if the received message fits into the
message area. The message is moved including the LLZZ bytes into the message
area. If there are no more messages, LL=0 is moved into the
message area.
If the message does not fit into the message area, a corresponding error message is returned.
Sample Programs: NIPSGETM and NIPSOBMP.
The module CMGETSEG reads the next segment of the current
message from the message queue.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Message area |
Input | ||
Message area length |
(B4) | Input |
The length is checked to see if the received message fits into the
message area. The message segment is moved including the LLZZ bytes into the
message area. If there are no more message segments, LL=0 is moved
into the message area.
If the message does not fit into the message area, a corresponding error message is returned.
Sample Program: NIPSOBMP
The module CMGETSPA transfers the data from the SPA
starting from the given offset in the requested length into the receiving
area.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Offset |
(B4) | Input | |
Length |
(B4) | Input | |
Area |
(B4) | Output |
Sample Programs: NIPSGSPA and NIPSPSPA
The module CMIMSID enables Natural programs to obtain the
MVS subsystem ID of the IMS TM system in which they are currently
scheduled.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
IMSID |
(A4) | Output |
After the call is executed, the field IMSID
contains the MVS subsystem ID of the IMS TM system in which you are currently
scheduled.
The module CMIMSID depends upon an internal IMS TM control
block. Therefore, it is an IMS TM release-dependent function that will be
updated whenever possible.
The module CMIMSINF provides system environment
information.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
IMSID |
(A4) | Output | The IMS TM ID. |
SUFFIX |
(A2) | Output | The preload suffix. |
APPLGNAM |
(A8) | Output | The application group name. |
APPLNAM |
(A8) | Output | The application name. |
NRENT |
(B4) | Output | The number of reentrant modules preloaded. |
NNONR |
(B4) | Output | The number of non-reentrant modules preloaded. |
CMIMSINF is also an IMS TM release-dependent module.
Sample Program: NIPSINF
The module CMPCBADR returns the address of a PCB which is
identified by a logical name. The PSB name is also returned to the Natural
program.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
PSB name |
(A8) | Output | |
PCB name |
(A8) | Input | |
PCB address |
(B4) | Output |
After the call is executed, the field PCBADR contains the
address of the PCB identified in the table module by the logical name
PCBNAME in the table entry that corresponds to the
currently scheduled transaction code. If the logical name does not exist for
this transaction code, X'FFFFFFFF' is returned in the
PCBADR field. In any case, the field
PSBNAME contains the name of the currently scheduled
PSB.
Sample Program: NIPSPCBA
The module CMPRNTR changes the default hardcopy destination
set by the module NIIIMSHC to the value passed as parameter.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Destination |
(A8) | Input |
The module CMPRNTR is provided for compatibility reasons
only; use the Natural statement SET
CONTROLhdest-id
instead.
The module CMPUTMSG can be used to insert any given output
message of a given length into the IO-PCB, using any given MFS MOD
name. In this way, you can send MFS-formatted output messages back to
the originator of the input message.
CMPUTMSG takes the number of bytes as indicated in the
message length from the message area and inserts them with the specified
MOD name in the message queue. There is no restriction upon the
length of the message, except that it has to fit into the input message area of
the environment-dependent interface.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Message area |
Input | ||
Message length |
(B4) | Input | |
MOD name |
Input |
If a non-blank status code is returned in the IO-PCB, Natural error message NAT8272 is issued which contains the status code as variable part.
The module CMPUTSPA moves the data with the given length at
the specified offset into the SPA.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Offset |
(B4) | Input | |
Length |
(B4) | Input | |
Data |
Input |
A check is done if the specified offset points into the Natural Reserved Area (NRA) within the SPA. If yes, return code 4 is returned.
Sample Program: NIPSPSPA
The module CMQTRAN returns the contents of the current
entry within the transaction code table.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Transaction code |
Output | The transaction code under which you are running. | |
Offset |
(B2) | Output | The offset of the NRA with the SPA. |
Length |
(B2) | Output | The length of the NRA. |
Uoffset |
(B2) | Output | Not used. |
PSB name |
Output | The name of the scheduled PSB. | |
Number of PCBs |
Output | The number of PCBs whose addresses you can obtain using the
module CMPCBADR.
|
The logical names by which you can refer to PCBs in the module
CMPCBADR are not returned because of security considerations; you
should be informed by your system about which logical names you are allowed to
refer to.
Sample Program: NIPSQTRA
The module CMQUEUE inserts a message into the specified
alternate PCB.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Destination |
Input | ||
Message |
Input | ||
Message length |
(B4) | Input | |
TP PCB number |
(B4) | Input | Optional |
This call causes an immediate change call to set the destination of the specified alternate PCB to the value contained in the field Destination, after which the message is inserted into the alternate PCB with the indicated Message length.
The transaction code is inserted after the LLZZ bytes with a length of 8.
After a PURGE call has been issued, control
is returned to the next instruction in the Natural program.
The message can have any length up to the size of the input message area (usually 8000 minus 12 bytes).
The alternate PCB to be used is specified with the last optional
parameter. If no TP PCB number is specified with the call, the
alternate TP PCB specified with the
ALTPCB
keyword subparameter of the NTIMSPT macro (Natural parameter
module) is used.
Sample Program: NIPSQLOA
The module CMQUEUEX provides you with complete control over
the contents of a message that is to be queued in the IMS TM input queue.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Destination |
Input | ||
Message |
Input | ||
Message length |
(B4) | Input | |
TP PCB number |
(B4) | Input | Optional |
This call causes an immediate change call to set the destination of the
specified alternate PCB to the value contained in the field Destaination, after
which the message is inserted into the alternate PCB with the indicated Message
length after the LLZZ bytes. The difference compared to CMQUEUE is
that the transaction code is not inserted after the LLZZ bytes.
After a PURGE call has been issued, control
is returned to the next instruction in the Natural program. The message can
have any length up to the size of the input message area (usually 8000 minus 12
bytes).
The alternate PCB to be used is specified with the last optional
parameter. If no TP PCB number is specified with the call, the alternate TP PCB
specified with the ALTPCB
keyword subparameter of the NTIMSPT macro (Natural parameter
module) is used.
Sample Program: NIPSQUEX
The module CMSNFPRT sets the logical name of the device to
which the Natural messages during the online BMP run is sent.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Printer name |
Input |
Before calling CMSNFPRT, use the Natural profile parameter
SENDER to
define the default output destination.
Sample Program: NIPSOBMP
The module CMSVC13D terminates the Natural session with
user abend code U3962 and produces a dump.
Parameters: None
Sample Program: None.
When the Natural session is terminated normally, the Natural IMS TM Interface performs a direct program-to-program switch to the specified transaction code and inserts the SPA via the alternate PCB.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Trancode |
Input |
Sample Program: NIPSEOSS
The module NIIDDEFS is similar to module
CMDEFSWX. If you use NIIDDEFS to perform a deferred
switch to a foreign transaction, the current Natural session is suspended, as
with module CMDIRSWZ. The suspended Natural session can be resumed
at any time by sending back to Natural a message containing the
CLEAR key.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Transaction code |
Input | The transaction code to switch to. | |
Message |
Input | The message to be sent to the foreign transaction code. | |
Message length |
(B4) | Input | |
MOD name |
(A8) | Input | |
Transaction type |
(A4) | Input | An A4 variable containing the string CONV if the
foreign transaction is conversational and the string NONC if the
foreign transaction is non-conversational.
|
Return Codes:
| 0 | OK |
|---|---|
| 4 | The message length is greater than the size of the message area defined in the environment table. |
| 8 | You tried to do a deferred switch with suspend from a conversational Natural to a non-conversational foreign transaction, something which cannot be done. |
| 12 | The fifth parameter is invalid; it contains neither
CONV nor NONC.
|
Sample Program: NIPSDEFS
The module NIIDPURG does not have parameters. It issues a
PURGE call using the same alternate PCB that has
been used with the NIIDQUMS call and sends multi-segment messages
that have been created using the module NIIDQUMS.
Return Codes: Either bytes two and three of the 4-byte return code contain the status code, or the return code has the value 0.
Sample Program: NIPSQLMS
This module creates multi-segment messages. It has basically the same
functionality as the module CMQUEUE, with the difference that
NIIDQUMS does not issue a PURGE
call.
The following parameters are provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Destination |
Input | ||
Message |
Input | ||
Message length |
(B4) | Input | |
TP PCB number |
(B4) | Input | Optional |
It is your responsibility to issue the PURGE
call using the module NIIDPURG.
The alternate PCB to be used is specified with the last optional
parameter. If no TP PCB number is specified with the call, the alternate TP PCB
specified with the ALTPCB
keyword subparameter of the NTIMSPT macro (Natural parameter
module) is used.
Sample Program: NIPSQLMS
In order to perform a correct transaction switch to a foreign
transaction code, the type of the foreign transaction code must be known. To
obtain this type, the special-purpose module NIIDSETT can be used.
If NIIDSETT is not used, the foreign transaction code is assumed
to be of the same type as the invoking Natural transaction code. If this is not
the case, there will be unpredictable results or the session will terminate
abnormally.
The following parameter is provided:
| Name | Format/Length | Type | Comment |
|---|---|---|---|
Transaction type |
(A4) | Input | Possible values:
|