Text |
Natural RPC initialization failed. RPC not available. |
Explanation |
This error message is preceded by an initialization error message. On the client side, the following features are not available: - execution of a remote CALLNAT, - SYSRPC functions SM, XC and PM, - local use of conversations and context variables. On the server side, the termination of the Natural RPC server session is enforced by an implicit ITERM=ON. |
Action |
Check the previous initialization error. |
Text |
Connection error on ..., reason ... .... |
Explanation |
Reason: 1: No transport layer.
2: Connection timed out.
3: Conversation timed out.
4: No space for working storage of broker stub.
Increase Natural thread or region size by 35 KB.
5: Data have been truncated. Increase MAXBUFF on server side.
6: Location transparency no longer supported.
7: Node not active.
8: Server not active.
9: Error from transport layer; issue RPCERR for details.
After the reason, the message displays the server/node in question.
With AUTORPC=ON this error may also occur instead of a local NAT0082
error on the client side. |
Action |
Proceed depending on above reason. |
Text |
Directory error on ..., reason ... .... |
Explanation |
A directory error has occurred. Possible reasons are:
1 - No directory.
2 - Invalid directory.
3 - No space to load directory. Increase the RPC size.
4 - No server found in service directory for the subprogram/library
whose names are indicated in the error message.
5 - Recursive RPC with the two subprograms whose names are
indicated in the error message.
6 - A Natural error has occurred during loading of NATCLTGS.
The error number is indicated in the error message.
With AUTORPC=ON this error may also occur instead of a local NAT0082
error on the client side. |
Action |
Proceed depending on above reason. |
Text |
Conversation error on ..., reason ... .... |
Explanation |
Reason: 1: Too many subprograms for OPEN CONVERSATION.
2: Invalid subprogram name.
3: RPC size overflow. Increase RPC size.
4: Mixed local/remote CALLNAT within one conversation (program).
It is not possible to execute subprograms that are members
of one conversation partially remote and local.
5: Recursive conversation. It is not possible to execute a
subprogram that is a member of a conversation while you
are executing a subprogram within that conversation.
6: Conversation to be closed not found.
7: Conversation ID to be closed is not valid.
8: CLOSE CONVERSATION executed inside a local conversation.
It is not possible to close a conversation while you are
executing a subprogram within that conversation. |
Action |
Proceed depending on above reason. |
Text |
Conversion error on :1:, reason :2: :3:. |
Explanation |
Reason: 1: Variables of type CONTROL and HANDLE and extensible lower
bounds in X-arrays not supported.
2: Error converting to external format of parameter :3:.
3: Error converting to internal format of parameter :3:.
4: No space for conversion to internal format of parameter :3:.
Increase MAXBUFF on :1: side.
5: No space for conversion to external format of parameter :3:.
Increase MAXBUFF on :1: side.
6: Format buffer error for parameter :3:.
7: No space. Increase region/thread size (MF) or USIZE (LUW).
8: No MAXBUFF defined on client side, but RPC is used.
10: AD=M (inout) or AD=A (in) parameter used with reliable RPC.
11: The used interface object does not support reliable RPC.
Regenerate interface object with latest Natural version. |
Action |
Proceed depending on above reason. |
Text |
Security error on ..., reason ... .... |
Explanation |
Reason: 1: Logon data required by the Natural RPC server.
2: Invalid logon data received by the Natural RPC server.
After the reason, diagnostic information is indicated
in the message.
3: Invalid offset to the logon data in the RPC meta data.
4: Impersonation failed for the user indicated in the message.
The external security system has rejected the logon attempt
of the user. The reason is shown in the Natural RPC server
trace and in the system log of the server. |
Action |
Reason: 1: Pass logon data from the client to the Natural RPC server.
2,3: Contact Software AG support.
4: Pass logon data that is valid for your security system. |
Text |
Context error on ..., reason ... .... |
Explanation |
Reason: 1: Context size overflow.
The storage for the variables of the DEFINE DATA CONTEXT
statement could not be allocated.
On mainframe computers, the CONTEXT buffer could not be
allocated or increased. This is either caused by storage
restrictions of the operating or TP system, or by Natural
environment constraints (Natural profile parameter OVSIZE,
NATCONFG table entry NTBUFID for CONTEXT buffer).
On Windows and UNIX systems, the USIZE buffer was not large
enough to fulfil the storage request.
2: Conflict in format/length definition of a variable.
The context variable whose name is shown in the error message
was defined in a previous program with a different
format/length. |
Action |
Reason: 1: Decrease number of context variables and/or number of
concurrent conversations, or remove storage contraints.
2: Correct format/length of context variable. |
Text |
EntireX RPC error on ..., reason ... .... |
Explanation |
An EntireX RPC error has occurred. The reason shows the EntireX RPC error number, optionally followed by additional diagnostic information. This error can only occur if a Natural client is communicating with an EntireX RPC server. |
Action |
Refer to the EntireX Communicator messages and codes. |
Text |
RPC protocol error on ..., reason ... .... |
Explanation |
Reason: 2: The Server does not support the RPC protocol version used by
the RPC client.
Or:
The client does not support the RPC protocol version used by
the client interface object (stub subprogram).
After the reason, the unsupported version is shown
in the message.
3: The RPC protocol header or RPC format buffer is invalid.
After the reason, the corresponding EntireX error number is
shown in the message. In the case of format buffer errors,
the erroneous element is appended to the error number. |
Action |
Use the correct RPC protocol version. Refer to the EntireX messages. |
Text |
Premature termination of a remote CALLNAT. |
Explanation |
The remote execution of a CALLNAT was prematurely terminated on the server side and all data of the parameter area were lost. The reason for this may be the use of one of the following Natural statements: - STOP - FETCH - ESCAPE BOTTOM outside of a processing loop - RUN - TERMINATE Note: These statements will be disabled in a remotely executed CALLNAT in one of the next Natural versions. |
Action |
Do not use one of the listed statements in a remotely executed CALLNAT. |
Text |
Invalid value specified for dynamic parameter .... |
Explanation |
You have specified a value for a dynamic parameter incorrectly. For information on valid values for this Natural profile parameter, see the Natural documentation. |
Action |
Either ignore, or invoke Natural again with correct specification of dynamic parameters. |