Natural System Error Messages 0151-0200

Text

Invalid map name in INPUT statement.

Explanation

The name of a map to be used in an INPUT statement can be specified
as a literal constant or the content of an alphanumeric variable.
If a variable is used, it must have been previously defined.

Action

Check program and correct error.

Text

Invalid map format in INPUT statement.

Explanation

The name of a map to be used in an INPUT statement may be specified
as a literal alphanumeric constant or the content of an alphanumeric
variable. If a variable is used, it must have been previously defined.

Action

Check program and correct error.

Text

Format definition not allowed for a group name.

Explanation

A group name is used to refer to a collection of fields as a single
structure. Since this structure is defined by the formats of these
fields, the group name need not have a format definition.
If a field of one format is to be redefined as fields of differing
formats, the REDEFINE statement should be used.
Another possible cause of this error is that the level number of the
next variable definition is higher than that of the variable marked,
although both variables should probably be at the same level.

Action

Remove the format definition at the group name level,
or make sure that the level numbers are correct.

Text

Map name must not be longer than 7 characters.

Explanation

A map name can be specified as a literal constant or the content of an
alphanumeric variable. The maximum length of a map name is 7 characters.

Action

Check program and correct error.

Text

Invalid group specification in MOVE BY NAME statement.

Explanation

The operands to be specified in a MOVE BY NAME statement must be
valid and existing group names. They may also be user views.
Individual field names cannot be specified.
If a user view is used, it must not be qualified with a statement
label or source-code line number.

Action

Check program and correct error.

Text

Fields in MOVE BY NAME or MOVE BY POSITION do not match.

Explanation

For MOVE BY NAME
no matching names were found. At least one field with the same name
must exist in both groups.

For MOVE BY POSITION
the number of fields in the referenced groups do no match.

Action

Check program and correct error.

Text

Invalid descriptor in READ LOGICAL statement.

Explanation

Descriptors that are multiple-valued are not permitted in
the THRU or ENDING AT clause of a READ statement.
Phonetic descriptors must not be used in a READ statement.
A field contained in a PE-group may not be used as search-field
in a READ statement.

Action

Check program and correct error.

Text

ROUNDED clause not allowed with DIVIDE REMAINDER.

Explanation

In a DIVIDE statement, you can use either the ROUNDED option to have
the result of the division rounded, or the REMAINDER option to have
the remainder of the division placed into a separate field.
As there can be no remainder with a rounded result, it obviously makes
no sense to use both options at the same time and is therefore not
permitted.

Action

Use ROUNDED option or REMAINDER option, but not both.

Text

Floating format not allowed for DIVIDE REMAINDER.

Explanation

When you use the REMAINDER option in a DIVIDE statement, the format
of the divisor and the dividend must not be 'F' (floating point).

Action

Check program and correct error.

Text

Specification of level missing in DEFINE DATA statement.

Explanation

In a DEFINE DATA statement, there must be an integer level number
before each variable, group, view, REDEFINE definition.

Action

Check program and correct error.

Text

Illegal syntax for variable name.

Explanation

- In a DEFINE DATA statement, the level specification must be followed
  by a valid name of a variable, group or view.
- In a DEFINE DATA INDEPENDENT statement,
  - a variable name has to start with a '+' character (AIV variable);
  - the name of a field resulting from the redefinition of an AIV
    variable must not start with a '+' character.
- A variable name starting with '+' (AIV) cannot be used in a
  PARAMETER, OBJECT, LOCAL or CONTEXT clause of a DEFINE DATA statement.

See Natural Statements / Statement Usage Related Topics / User-Defined
Variables / Naming Conventions and  DEFINE DATA statement, for rules on
naming variables.

Action

Correct error in program.

Text

Inconsistency in data structure of variable definition.

Explanation

An inconsistency in the data structure of a statement
has been detected. This error may occur in the following
statements:
- DEFINE DATA
- DEFINE FUNCTION  (RETURNS clause)
- DEFINE PROTOTYPE (RETURNS clause)

Action

Check the specifications of levels and variable definitions.

Text

Invalid variable definition in DEFINE DATA statement.

Explanation

An invalid definition of the DEFINE DATA statement has been detected.

Action

Check and correct variable definition.

Text

Duplicate specification of a view name detected.

Explanation

View names in the data structure of a program must be unique.

Action

Check view names of each GLOBAL, PARAMETER and LOCAL data structure.

Text

INTO constant not allowed in DIVIDE without GIVING clause.

Explanation

If your DIVIDE statement does not have a GIVING clause, the result
will be place into the operand after keyword 'INTO'; in this case,
the INTO operand cannot be a constant.
If you require the INTO operand to be a constant, use a GIVING clause
to specify a result field.

Action

Check program and correct error.

Text

Error in format/length or in EM, HD, PM definition.

Explanation

One of the following is invalid for a field definition in the
DEFINE DATA statement:
- format (valid formats are A,U,B,C,D,F,I,L,N,P,T);
- specified length;
- combination of format and length
  (valid lengths for formats A and B are 1-1073741824; for format U
   is 1-536870912; for format F is 4 or 8; for format I is 1, 2 or 4;
   no length value may be specified for formats C, D, L, T);
- number of positions before or after the decimal point for formats N,P
  (in the notation Nnn.m or Pnn.m, valid values for nn are 0-29, valid
   values for m are 0-29, and the sum nn+m must be in the range 1-29).
Or one of the parameters EM (edit mask), HD (header), or
PM (presentation mode) has not been specified correctly.
See the Natural DEFINE DATA statement documentation for details.

Action

Check program and correct error.

Text

A variable must be specified in INTO clause of SEPARATE.

Explanation

A variable, not a constant, must be specified with the INTO clause
of the SEPARATE statement.

Action

Check program and correct error.

Text

The INTO clause is missing in a SEPARATE statement.

Explanation

The keyword 'INTO', followed by one or more operands, is required in
a SEPARATE statement.

Action

Check program and correct error.

Text

The keyword 'NUMBER' is missing in a GIVING clause.

Explanation

If 'GIVING' is used, the keyword 'NUMBER' is also required.

Action

Check program and correct error.

Text

The field after NUMBER must be a numeric integer (N,I,P).

Explanation

The field specified in the GIVING NUMBER clause of a SEPARATE statement
must be a numeric integer; that is, its format must be one of the
following: I
           N (without decimal digits)
           P (without decimal digits)

Action

Check program and correct error.

Text

Source field and at least one target field are required.

Explanation

The source field in a SEPARATE statement may be an alphanumeric constant
or variable.
At least one target field, which must be an alphanumeric variable, must
be specified.

Action

Check program and correct error.

Text

Error in POSITION field of EXAMINE statement.

Explanation

The error may be caused by misspelling a variable name used as a
reference to the POSITION variable. The variable must be of numeric
format (N, I or P), and it must also be an integer (no decimal digits).

Action

Check program and correct error.

Text

Error in LENGTH field of EXAMINE statement.

Explanation

The error may be caused by misspelling a variable name used as
reference to the LENGTH variable. This variable must be of numeric
format (N,I,B or P), and it must be an integer (no decimal digits).

Action

Check program and correct error.

Text

Error in INDEX field of EXAMINE statement.

Explanation

The error may be caused by misspelling a variable name used as
reference to an INDEX variable. The variables must be of numeric
format (N,I,B or P), and they must be integers (no decimal digits).
The number of INDEX variables must equal the number of dimensions
contained in the examined array.

Action

Check program and correct error.

Text

Invalid keyword in GIVING clause of EXAMINE statement.

Explanation

The following keywords are valid after GIVING:
  NUMBER
  POSITION
  LENGTH
  INDEX
If more than one keyword is specified, they must be specified in the
order indicated above.

Action

Check program and correct error.

Text

Word 'TEXT' missing after 'WITH' in INPUT statement.

Explanation

The word 'TEXT' is a required part of the WITH TEXT clause.

Action

Check program and correct error.

Text

Error in specification of a variable in WITH TEXT clause.

Explanation

See the Natural documentation, INPUT or REINPUT statement, for details.

Action

Correct error in program.

Text

Invalid parameter list for WITH TEXT clause.

Explanation

See the Natural documentation, INPUT or REINPUT statement, for details.

Action

Correct error in program.

Text

No more than 9 parameters allowed in WITH TEXT clause.

Action

Check program and correct error.

Text

Specification error in variable of MARK clause.

Explanation

The variable must be a numeric integer and must have been previously
defined.

Action

Check program and correct error.

Text

Keyword 'ALARM' is required after 'AND' or 'SOUND'.

Explanation

The keyword 'ALARM' is a required keyword to identify the ALARM option;
the keywords 'AND' and 'SOUND' may be omitted.

Action

Check program and correct error.

Text

Keywords DO and DOEND not permitted in structured mode.

Explanation

You wanted to use a DO/DOEND statement group in structured mode;
however, DO/DOEND statement groups are only permitted in reporting mode.
In structured mode, explicit END-... statements are used to indicate the
end of a statement block; for example:
           AT BREAK DO...DOEND    becomes   AT BREAK...END-BREAK
     AT END OF DATA DO...DOEND    becomes   AT END OF DATA...END-ENDDATA
     AT END OF PAGE DO...DOEND    becomes   AT END OF PAGE...END-ENDPAGE
   AT START OF DATA DO...DOEND    becomes   AT START OF DATA...END-START
     AT TOP OF PAGE DO...DOEND    becomes   AT TOP OF PAGE...END-TOPPAGE
IF...DO..DOEND ELSE DO...DOEND    becomes   IF...THEN...ELSE...END-IF
           ON ERROR DO...DOEND    becomes   ON ERROR...END-ERROR
       BEFORE BREAK DO...DOEND    becomes   BEFORE BREAK...END-BEFORE
      PERFORM BREAK DO...DOEND    becomes   PERFORM BREAK...END-BREAK

Action

Select reporting mode or use the correct syntax.

Text

The LOOP statement is not permitted in structured mode.

Explanation

You wanted to use the statement LOOP in structured mode; however,
the LOOP statement is only permitted in reporting mode.
In structure mode, a loop is not closed with a LOOP statement but
with an explicit loop-closing END-... statement; for example:
Reporting Mode:  FIND ... LOOP
Structured Mode: FIND ... END-FIND

Action

Select reporting mode or use structured mode syntax.

Text

SORT without END-ALL is not permitted in structured mode.

Explanation

In structured mode, a processing loop initiated with a SORT statement
must be closed with an END-ALL statement.

Action

Check program and correct error.

Text

END-ALL must be followed by SORT in structured mode.

Action

Check program and correct error.

Text

Invalid placement of UNTIL or WHILE clause.

Explanation

An UNTIL or WHILE clause must be specified either immediately after
the keyword 'REPEAT' or immediately before the 'END-REPEAT'.
Examples:
1.   REPEAT UNTIL logical-condition
        statements
     END-REPEAT
2.   REPEAT
        statements
        UNTIL logical-condition
     END-REPEAT

Action

Check program and correct error.

Text

Loop-ending statement missing after UNTIL/WHILE.

Explanation

In structured mode, a REPEAT ... UNTIL/WHILE processing loop must be
closed with 'END-REPEAT'.
In reporting mode, it must be closed with 'LOOP'.

Action

Check program and correct error.

Text

Destination missing in ESCAPE statement.

Explanation

The ESCAPE statement requires extra keywords to specify the destination:
- ESCAPE TOP
- ESCAPE BOTTOM  or ESCAPE BOTTOM IMMEDIATE
- ESCAPE ROUTINE or ESCAPE ROUTINE IMMEDIATE
See the Natural documentation for more information.

Action

Correct error in program.

Text

Keyword 'ON' or 'FOR' missing in DECIDE statement.

Explanation

The keyword 'DECIDE' must be followed either by 'ON' or by 'FOR'.

Action

Check program and correct error.

Text

Invalid syntax in DECIDE FOR statement.

Explanation

See the Natural documentation for information
on the correct syntax of the DECIDE FOR statement.

Action

Correct error in program.

Text

Specified field must not be an array range.

Action

Check program and correct error.

Text

GIVING INDEX is only allowed for indexable variables.

Action

Check program and correct error.

Text

Variable format not permitted in this statement.

Explanation

1. A variable of format 'C' is not permitted in a DISPLAY,
   WRITE, INPUT, PRINT, STACK, RUN and FETCH statement.
2. A variable of format HANDLE OF OBJECT can not be used
   in this statement.

Action

Check program and correct error.

Text

No more than 128 parameters allowed in CALL statement.

Explanation

The maximum number of parameters in a CALL statement is 128.

Action

Check program and correct error.

Text

Label defined twice or same as view/level-1-variable name.

Explanation

Within a Natural module, a label must not be equal to another label,
a view name or a variable name defined on level 1.

Action

Check program and correct error.

Text

Error in INCLUDE source lines.

Explanation

See Natural INCLUDE statement documentation for more information.

Action

Check program and correct error.