All SYSMAIN functions can be performed on user-defined and Natural system error messages. Error messages can be moved from one library to another, or the language texts of each error message can be copied, moved or replaced. In addition, it is possible to renumber a single error message or a range of error messages by using the rename function.
Only authorized users can process Natural system error messages if Natural Security is installed.
Error messages are stored in the system files according to their type: Natural system error messages are stored in the FNAT system file and user-defined error messages in the FUSER or FNAT system file.
This section describes menu functions and selection list options provided to perform a SYSMAIN function on error messages and the syntax that applies when using direct commands.
SYSERR Utility documentation.
The Error Message Texts menus contain all SYSMAIN functions required for the processing of error messages. The fields that can be provided in a menu are described in the following table:
| Field | Explanation | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Code |
|
||||||||||||
| Sel. List |
|
||||||||||||
| No. From or Number | The number of the error message to be processed, or the start number of a range of numbers if an end number is entered in the No. To field. See also Renumbering Error Messages. | ||||||||||||
| No. To | The end number of a range of error messages numbers to be processed if a start number is entered in the No. From field. See also Renumbering Error Messages. | ||||||||||||
| New From | Applies to the rename function.
The new number to be given to an existing error message, or the start number of a range of new numbers to be given to a range of existing error messages. See also Renumbering Error Messages. |
||||||||||||
| New To | Applies to the rename function.
The end number of a range of new error message numbers to be given to a range of existing error message. See also Renumbering Error Messages. |
||||||||||||
| Library | The name of a source or a target library or a range of names. If
you want to process Natural system error messages, leave the
Library field empty.
The source library contains the error message(s) to be processed. The target library is the library to which the error message is to be copied or moved, or where the error message is renumbered. See also Listing and Selecting Libraries. |
||||||||||||
| Lang. | The language code(s) in which the error message is available.
The languages can be specified using any combination of language
codes. For information on which language code is assigned to which language,
see Language Code
Assignments in *LANGUAGE in the
System Variables documentation. For Natural system
extended (long) error messages, only language code See also Specifying Languages. |
||||||||||||
| Database | The database ID (DBID) of a source or a target database.
The source database contains the library and system file where the error message to be processed is stored. The target database contains the library and system file to which the error message is to be copied or moved, or where the error message is renumbered. Valid database IDs are |
||||||||||||
| File | The file number (FNR) of a source or a target system file.
Valid file numbers are The source file contains the library where the error message to be processed is stored. The target file contains the library to which the error message is to be copied or moved, or where the error message is renumbered. |
||||||||||||
| Replace |
|
||||||||||||
If selective processing has been activated, a selection list of all error messages that meet the specified selection criteria is displayed on a Selection screen.
This section describes the columns contained on a Selection screen and the line commands provided to further process an error message:
The following columns are displayed on a Selection screen:
| Column | Explanation |
|---|---|
| C | Input field for line commands (see below). |
| Error | The name of the error message that meets the specified selection criteria. |
| Error Message Text | The text of the short error message. |
| Type | The type of error message: S (short) and/or
E (extended/long).
|
| Lang | The first language code in sequence or alphabetical order that
exists for the error message. If you want to display all languages that exist
for an error message, on a Selection screen, enter the
line command L or use the list function.
|
| Message | The message that indicates the processing status of an error
message.
This column only appears after a line command was executed on an error message. For possible messages, see Status Messages. |
One of the following line commands can be entered in the C (Command) column of a Selection screen:
| Line Command | Function |
|---|---|
A
|
Process any type of message listed in the
Type column. The type can be: short (S),
extended/long (E) or short and extended
(S/E).
|
E
|
Process the extended (long) message if the corresponding short
message exists in the target environment.
If |
S
|
Process all short messages. |
L
|
Review an error message before processing it. The short and/or
extended (long) error message is displayed for all existing languages,
depending on the function specified previously in the Error Message
Texts menu.
This line command can also be used on a Library Selection screen (see also Listing and Selecting Libraries). |
You can renumber a single error message or a range of error messages.
To renumber a single error message
In the No. From field, enter the number of the error message you want to renumber and, in the New From field, enter the new error message number.
In the Source Library field, enter the name of the library that contains the error message to be renumbered.
If you want the renumbered error message to be placed in a different library, enter a name in the Target Library field.
To renumber a range of error messages
In the No. From field, enter the start number of the range of error messages to be renumbered and, in the No. To field, enter the end number.
In the New From field, enter the start number of a new range of error messages, and in the New To field, enter the end number.
The number of error messages specified by the range in the No. From and No. To fields of the source library must be equal in number to the range in the New From and New To fields of the target library. For example, it is not possible to renumber error message numbers 1 - 6 as new error message numbers 7 - 10.
If you want to renumber a range of error messages within a single library, range values must not overlap. For example, it is not possible to renumber error message numbers 1 - 6 as new message numbers 5 - 10.
In the Source Library field, enter the name of the library that contains the error messages to be renumbered.
If you want the renumbered error messages to be placed in a different library, enter a name in the Target Library field.
See also the examples of range specifications in RENAME in Direct Command Syntax for Error Messages.
When specifying languages consider the following:
If the list function is performed and the specified language code does
not exist for the error message, SYSMAIN uses the default language specified
with the system variable *LANGUAGE (see
*LANGUAGE in
the System Variables documentation).
If an asterisk (*) is specified for a source error message, all language codes defined for this error message will overwrite any language codes defined for the target error message.
For example: If the source error message exists only in languages
1, 2 and 3, and for the target error
message only languages 1, 4 and 6 are
defined, after performing a copy function, the resulting target error message
exists only in languages 1, 2 and 3.
If the languages are specified as individual codes, each occurrence of language code is processed individually.
For example: If the source error message contains languages
1, 2 and 3, and the language codes are
set to 123, and if the target error message contains languages
1, 4 and 6, and the language codes are
also set to 123, after performing a copy function, the resulting
target error message contains languages 1, 2,
3, 4 and 6, but only the English target
error message (language 1) is overwritten by the English text of
the source error message.
If a single language code is specified for the source error message and multiple language codes are specified for the target error message, after performing the copy function, the resulting target error message is in the first language specified for the target.
This section shows the syntax that applies when performing a SYSMAIN function on error messages by using direct commands in either online or batch mode. For general instructions on using direct commands, refer to Executing Commands.
For explanations of the keywords and variable values used in the syntax diagrams below, refer to Keywords and Variables in Direct Commands. The symbols in the syntax diagrams correspond to the syntax symbols used for system commands. These symbols are explained in System Command Syntax in the System Commands documentation.
The syntax of the where-clause and the with-clause are identical for each command.
Wichtig:
For system error messages, specify NATURAL-SYSTEM
or NATURAL-SYS as lib-name.
This section covers the following topics:
|
|
|
ERROR
|
|||
| number | [THRU
number]
|
||||
FM
[LIBRARY]
lib-name
[where-clause]
|
|||||
TO
[LIBRARY]
lib-name
[where-clause]
[with-clause]
|
COPY ERROR 1 FM ACCOUNTS TO ACCOUNTS1 REP WITH TYPE A
C ERROR 1 THRU 50 FM ACCT WHERE DBID 1 FNR 10 LANG 123456 TO ACCT WHERE DBID 5 FNR 26 LANG 234567 WITH REP HELP
MOVE E 200 THRU 210 FM ACCT FNR 10 LANG 123 TO ACCT LANG 123 TYPE S
M E 376 TYPE E FM ACCT LANG E TO ACCT LANG G
DELETE
|
ERROR
|
number | [THRU number]
|
||||
|
|
IN
[LIBRARY]
lib-name
|
|
[where-clause] | [with-clause] | |||
DELETE ERROR 1 THRU 10 IN LIBRARY ACCT WHERE DBID 1 FNR 2 PSW GUESS CIPH 137561 WITH TYPE E MON HELP
D E 100 IN ACCT
FIND
|
ERROR
|
number |
|
IN
[LIBRARY]
lib-name
|
|
[where-clause] | [with-clause] |
FIND E 4280 IN A* MON
F ERROR 10 IN LIB ACCT WHERE DBID 1 FNR 3 WITH TYPE E
LIST
|
ERROR
|
number | [THRU
number]
|
|
IN
[LIBRARY]
lib-name
|
|
[where-clause] | [with-clause] |
LIST E 1 THRU 10 IN ACCT
L ERROR 100 THRU 150 IN LIB ACCT WHERE DBID 12 FNR 5
When renumbering a range of error messages within a single (source) library, the range values must not overlap as demonstrated in Examples of Invalid Number Ranges.
RENAME
|
ERROR
|
number | [THRU
number]
AS new-number
|
[THRU
new-number]
[with-clause]
|
|||
IN [LIBRARY]
lib-name
[where-clause]
|
|||
TO
[LIBRARY]
lib-name
[where-clause]
|
RENAME ERR 1 AS 101 IN ACCT
R ERROR 1 THRU 100 AS 101 THRU 200 IN CLAIMS
R ERROR 101 THRU 200 AS 1 THRU 100 IN CLAIMS
RENAME ERROR 1 THRU 50 AS 11 THRU 60 WITH TYPE A REP HELP MON RCOP IN LIBRARY ACCT WHERE DBID 1 FNR 2 TO LIB ACCOUNT WHERE FNR 3
The following examples are invalid, because the number ranges overlap:
R ERROR 1 THRU 100 AS 51 THRU 150 IN CLAIMS
R ERROR 101 THRU 200 AS 51 THRU 150 IN CLAIMS
[WHERE] [DBID
dbid]
[FNR fnr]
[NAME
vsam-name]
[CIPHER
cipher]
|
|||||||
|
|
|
|
|
password |
|
[LANGUAGE
language]
|
[SEC
(dbid,fnr,password,cipher)]
|
Commas must be used as separators between the values following the
SEC keyword, or if a value is missing. For example: SEC
(10,,secret,2a). If the session parameter ID (see
ID - Input Delimiter
Character in the Parameter Reference
documentation) has been set to a comma, use a slash (/) as the separator
between values.
[WITH] [TYPE
type]
[REPLACE] [ RCOP]
|
|
|
|
|
[HELP]
|
