The ETP Maintenance Utility provides you, the ETP Administrator, with screens and menus to:
Add, display, change and delete master and replicate file definitions;
Display and change a replicate or related confirmation file;
Display and delete entries in a master file's log file;
Stop/start replication tasks;
Change system and user profiles.
This Dokument covers the following topics:
Utility functions can be performed on master or replicate files on all ETP nodes that are defined in the administration file. The link to the administration file is created when you install the maintenance utility; see Installing the Entire Transaction Propagator in the Installation for z/OS and Installation for z/VSE documentation. You can also maintain multiple administration files (which can be on different databases) from a single node with the maintenance utility.
There is more than one way you can start the maintenance utility. The choice of ways depends on whether or not Natural Security is installed:
Without Natural Security, one of the following:
Enter the command SYSETP
on the command
line;
Log on to the library SYSETP
, and then enter the command
MENU
on the command line;
With Natural Security and MENU
defined as
startup command:
enter the command SYSETP
on the command
line;
Log on to library SYSETP
.
With Natural Security and MENU
not
defined as startup command:
Enter the command SYSETP
on the command
line;
Log on to the library SYSETP
, and then
enter the command MENU
on the command line;
ETP then displays the ETP maintenance utility's main menu. Using its screens and menus, you can display and change ETP control information and perform maintenance tasks on the ETP file structure.
23:59:59 ***** ENTIRE TRANSACTION PROPAGATOR ***** 2000-12-24 Menu MM Maintain master file definitions MR Maintain replicate file definitions R Replicate transactions CD Control execution of asynchronous tasks CL Clean up Log file X X-Ref transactions S Special functions N Execute Natural system command or program Command ===> Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12--- Help Menu Exit Last Flip Tech Canc |
The menus provide a choice of tasks that can be performed. Such tasks as those listed on the main menu can be performed by doing one of the following, and then pressing Enter:
Placing the cursor on the line of the task in the menu;
Overtyping the code in front of the task description -
MM
, for example - with any other letter;
Entering the code in front of the task description on the command line at the bottom of the menu.
Selecting a task with the cursor or entering a task code is possible only when the related menu is displayed. Using a direct command, however, you can select a task to perform regardless of which menu is currently displayed.
The tasks or screens you can select on the main menu are described later in this section.
Screens that allow you to enter data designate the input fields with
underscores (__...__
). The command line of each screen is not
underscored, although it also is an input field. Use the Tab key to move from
input field to input field. When entering input in a field, the data is aligned
according to the data type; numeric data is right-aligned, and alphanumeric
data is left-aligned.
23:59:59 ***** ENTIRE TRANSACTION PROPAGATOR ***** 2000-12-24 Display replicate file definition +----------------Replicate file definitions----------------+ ! ! ! -- Replicate -- Conf ---------- Master ---------- ! ! DBID FNR FNR DBID FNR Key Format ! ! _____* _____* _____* _____* ! Replicat ! _ 10 155 152 10 154 AC B4 ! ! _ 10 156 152 10 135 AA A10 ! ! _ 10 157 152 10 136 AB A80 ! Printer ! _ 10 158 152 10 138 AG N4 ! ! _ 10 159 162 10 139 ! ! _ ! ! _ ! ! _ ! ! _ ! ! _ ! ! ! +----------------------------------------------------------+ Command ===> Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12--- Help Menu Last Flip Tech Canc |
Screens with fields allowing wild card entries display the results of wild card searches in a window, as shown in Example of a Displayed List, above. Fields that allow wild card entries have an "*" as the last description character. See the following section, Entering Direct Commands for more information about wild card entries.
Those fields with an asterisk (*) as the last character of the description allow you to enter wild card characters. For example:
DISPLAY MASTER * *
- displays a window from which you can select one or more master files to in turn display their definitions, and:
MOD REPL * 20>
- displays a window that enables you to select a single replicate file
for modification from those replicate files on all ETP databases with file
numbers 20 and above. Wild card entries can be combined with the
PROCESS
dialogue function (see
Dialog Function
Description below) to perform a task on a range of items
(files or log file entries).
If you make a wild card selection that results in a window that allows you to select one or more items, select the item or items (see Example of a Displayed List) you want in either of the following ways:
place the cursor on the corresponding line;
enter any non-blank character in the input field ahead of the item or items.
If you make more than one selection on a screen that allows only one single selection, an error message occurs. When only one selection is allowed, a choice made with a non-blank character has priority over a choice made by placing the cursor.
When a window appears that permits more selections than can be held in the window itself, "+" and/or "-" appear to show the paging possibilities for displaying the additional items. Simply place the cursor on the appropriate symbol in the bottom left corner of the window and press Enter to display the additional items. This is the same as entering "+" or "-" dialogue functions (see Dialog Function Description below).
When selecting items, you can enter an asterisk (*) in place of a value to select all related items. To select an "equal and greater" or "equal and less than" range of items, enter one of the following:
n< (less than and equal to nn) n> (equal to and greater than nn)
If more than one input field defines the selection for a task, either or both of these selection criteria can be used. This enables the selection of, for example, all files with numbers 100 and above in databases 10 or below.
The priority of menu/screen input and commands is as follows:
Command line input or PF key (if both entered, an error occurs);
Changing/entering a non-blank value in a menu selection input field;
Placing the cursor in a menu selection input field.
As the example screen shows, the maintenance utility allows you to
enter a command on the command line at the bottom of a screen. The so-called
"direct commands"can be entered either fully (ADD
MASTER
, for example) or abbreviated (A
MA
for adding a new master file).
Most direct commands also allow you to specify a database ID (DBID) and/or physical file number; however, this is not required. If you enter no DBID or file number (or if neither is allowed), the function screen appears, just as when you select the function from a higher-level menu. If you enter the DBID and file number, the function screen appears, either with the value or values entered in the appropriate fields, or overlaid with the window showing the DBID/file number selection you made as if you had made the DBID and file number selection in the function screen.
Direct commands cannot be entered in the command line if a window is currently displayed.
The following table shows the ETP direct commands. Minimum command abbreviations are shown in bold type:
Direct command: | Parameters allowed/required: | Wildcards allowed? | |
---|---|---|---|
DBID | FNR | ||
ADD
MASTER |
x | x | No |
ADD
REPLICATE |
x | x | No |
CHANGE
ADMINISTRATION |
x | x | No |
CHECK
DEFINITIONS |
|||
CLEANUP
LOGFILE |
|||
CONTROL
TASKS |
|||
DELETE
MASTER |
x | x | Yes |
DELETE
REPLICATE |
x | x | Yes |
DELETE
TRANSACTIONS |
x | x | Yes |
DISPLAY
ERROR |
x | x | Yes |
DISPLAY
MASTER |
x | x | Yes |
DISPLAY
REPLICATE |
x | x | Yes |
DISPLAY
TRANSACTIONS |
x | x | Yes |
MAINTAIN
MASTER |
|||
MAINTAIN
REPLICATE |
|||
MODIFY
CONFIRMATION |
x | x | Yes |
MODIFY
MASTER |
x | x | Yes |
MODIFY
REPLICATE |
x | x | Yes |
MODIFY
SYSPROF |
|||
MODIFY
USERPROF |
|||
NATURAL |
(command string) | ||
REPLICATE
TRANSACTIONS |
|||
RESET
ERROR |
x | x | Yes |
RESET
IN-USE |
x | x | Yes |
SPECIAL |
|||
XREF
TRANSACTIONS |
Yes |
Dialogue functions are the screen control and general operation commands for operating the maintenance utility. The dialogue functions, which can be either entered on the screen's command line as direct commands or by pressing the appropriate PFn key, perform such tasks as:
Returning to the main menu from a specific task menu
(MENU
);
Saving the entries and status of the current screen
(SAVE
);
Performing a maintenance utility function on a range of files
(PROCESS
);
Exiting a task screen and returning to the next higher selection menu
(EXIT
).
To perform a dialogue function, press the appropriately labelled
function key (PFn), which follow the
common conventions for the general dialogue functions (PF1 for
calling online help, PF3 for EXIT
, and so
on); otherwise, enter the dialogue function on the command line. Note, however,
dialogue functions are most likely not valid for a particular screen if they
are not already assigned to a function key. A Modify
screen with confirmation window may look as shown below.
The dialogue functions and, where appropriate, their related function (PFn) keys are as follows:
23:59:59 ***** ENTIRE TRANSACTION PROPAGATOR ***** 2000-12-24 Modify master file definition DBID FNR Verify FDT Master file ..* 10 135 Y (Y/N) Log file ... 152 N (Y/N) +-----------Exit------------+ ! ! ADABAS field name of di ! _ save and exit ! NATURAL data format of ! _ exit without save ! ! _ resume current function ! Call user exit before re! ! Start program after ET .+---------------------------+ Command ===> exit Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12--- Help Menu Exit Last Flip Tech Canc |
BACKWARD
(PF7)
|
Displays the previous screen of data. Entering
"-" is the same as entering
BACKWARD .
|
BOTTOM
(PF19)
|
Displays the last screen of data. Entering "++"
is the same as entering BOTTOM .
|
CANCEL
(PF12)
|
Leaves the current screen and returns to the higher-level
menu. If entered in the ETP main menu, exit from ETP. If the current screen is
a MODIFY or DELETE task,
a window (Figure 11) appears requesting confirmation of the
MODIFY /DELETE operation
unless the confirmation window is disabled by the user's profile; otherwise,
the operation is not performed.
|
EXECUTE |
Perform the current screen task, then leave the current screen
and return to the higher-level menu. Unless disabled by the user's profile, a
window appears requesting confirmation of the
EXECUTE operation; otherwise, the operation is
performed.
|
EXIT
(PF3)
|
Leaves the current screen and returns to the higher-level
menu. If entered in the ETP main menu, exit from ETP. If the current screen is
a MODIFY or DELETE task,
a window appears requesting confirmation of the
MODIFY /DELETE operation
unless the confirmation window is disabled by the user's profile; otherwise,
the operation is performed. Entering "." is the same as entering
EXIT .
|
FLIP
(PF6)
|
Changes the function key display at the bottom of the screen between PF1-PF12 to PF13-PF24. |
FORWARD
(PF8)
|
Displays the next screen of data. Entering "+" is
the same as entering FORWARD .
|
LAST
(PF4)
|
Redisplays the direct command executed last in the command
line, where it can be changed and/or re-executed. Entering LAST
* on the command line shows the last 10 direct commands that were
executed, in a window. Place the cursor on the corresponding line, or enter any
non-blank character in the input field ahead of the command and press Enter to
enter that command in the command line for changing/ re-executing.
|
MENU
(PF2)
|
Leaves the current screen and returns to the main menu. If the
current screen is a MODIFY or
DELETE task, a window (Figure 11) appears requesting
confirmation of the
MODIFY /DELETE operation
unless the confirmation window is disabled by the user's profile; otherwise,
the operation is performed.
|
PROCESS |
This command-line-only function performs the currently
selected screen's function on all items that meet the criteria specified on the
current window. PROCESS can be entered only in
windows appearing in screens that require the DBID
and/or FNR parameters, and is intended for use with
"wild card" parameter specifications.
|
SAVE |
Saves the status of entries made in the current menu. A window
appears requesting confirmation of the operation. If the user's profile
disables the function, the confirmation window does not appear and the
operation is performed. SAVE is intended for
multiple updates; the current screen remains displayed.
|
TECH
(PF9)
|
Performs the function of the Natural
TECH
system command.
|
TOP
(PF20)
|
Displays the first screen of data. Entering "--"
is the same as entering TOP .
|
* |
Displays all direct commands allowed for the current screen. The minimum abbreviations for the direct commands are displayed in capital (upper case) letters. |
+
(PF8)
|
Performs the FORWARD screen
scrolling function.
|
++
(PF19)
|
Performs the BOTTOM screen
scrolling function.
|
- (PF7)
|
Performs the BACKWARD screen
scrolling function.
|
--
(PF20)
|
Performs the TOP screen scrolling
function.
|
. |
Performs the EXIT function.
|
Anmerkung:
The dialogue functions FLIP
,
LAST
, LAST *
, and
*
are processed before any other command
input.
If you enter an invalid command in the command line or invalid data in an input field, the ETP utility displays an error message in the message line at the bottom of the screen.
If you try to execute a task that might cause inconsistent data or if the change is not allowed, a window appears with a warning message.
If a severe processing error occurs, the utility displays a window
containing the cause and location of the error. ETP attempts to recover from
the error automatically by retrying the failing task. If the same error occurs
three times within a short time interval, ETP issues a
STOP
for the application.
If a severe and persistent error occurs that might be inherent to ETP, proceed as described under Reporting ETP Errors.
To select one of the tasks listed on the ETP main menu, place the cursor next to the desired entry and press Enter.
When you select either the Maintain master or replicate file definitions option, a more detailed menu of tasks appears, as shown in the example below. The tasks you can select on these screens are described under the headings Master File Task Screens and Replicate File Task Screens.
23:59:59 ***** ENTIRE TRANSACTION PROPAGATOR ***** 2000-12-24 Master File Definition Maintenance AD Add master file definition MO Modify master file definition DI Display master file definition DE Delete master file definition Command ===> Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12--- Help Menu Exit Last Flip Tech Canc |