Natural under openUTM Error Messages

This section lists the error messages that may be issued by the Natural openUTM Interface.

Unlike Natural system messages, the explanatory long texts to these messages and codes are only available in this document, not online. The error messages are listed in groups in the following order:

NUInnnn Error messages caused by task initialization errors
NUS00nn Error messages caused by user session errors
NUWnnnn Warnings

For information on the Natural openUTM Interface, see Natural under openUTM in the TP Monitor Interfaces documentation.

This section covers the following topics:


NUInnnn Messages

The following error messages may be issued by the Natural openUTM Interface. They are caused by task initialization errors; the content of register 15 (that is, the return code of the corresponding macro call) is issued with the error message.

NUI0003 - LOCATION OF FRONT PART IS ABOVE THE 16-MB LINE, BUT PARMOD=(31,ABOVE) NOT DEFINED

Explanation The front part is loaded above the 16-MB line and this is not defined in parameter PARMOD of macro NATUTM.
Action Either assemble the macro NATUTM with PARMOD=(31,ABOVE) or load the front part below.

NUI0004 - DMS ERROR nnnn IN OPEN ROLL FILE (nnnn REPRESENTS THE DMS ERROR CODE)

Explanation Error when trying to open the Natural roll file.
Action Issue the BS2000/OSD command /HELP nnnn.

NUI0006 - ERROR IN DEQUEUE ACCESS REQUEST

Explanation Error when calling the DEQAR macro.
Action See the error code for the DEQAR macro in the corresponding BS2000/OSD documentation.

NUI0007 - INCORRECT ADDRESS OF NATURAL LOAD POOL

Explanation The address of the Natural load pool is already being used by the corresponding openUTM task.
Action Define a fixed load pool address in parameter ADDR of macro ADDON, respectively module CMPSTART.

NUI0008 - ERROR IN ENABLE SERIALIZATION ITEM

Explanation Error when calling the ENASI macro.
Action See the error code for the ENASI macro in the corresponding BS2000/OSD documentation.

NUI0009 - ERROR IN ENACO FOR ROLL FILE

Explanation Error when calling the ENACO macro. A contingency definition is to be initiated for asynchronous writing to the Natural roll file.
Action See the error code for the ENACO macro in the corresponding BS2000/OSD documentation.

NUI0010 - ERROR IN ENAEI FOR ROLL FILE

Explanation Error when calling the ENAEI macro. Event-controlled processing is to be initiated for asynchronous writing to the Natural roll file.
Action See the error code for the ENAEI macro in the corresponding BS2000/OSD documentation.

NUI0011 - ERROR IN ENAEI FOR SPOOL PRINT TASK

Explanation Error when calling the ENAEI macro. Event-controlled processing is to be initiated for the Natural Advanced Facilities printer task.
Action See the error code for the ENAEI macro in the corresponding BS2000/OSD documentation.

NUI0012 - USER EXIT "RMSPOOL" NOT FOUND

Explanation The RMSPOOL operand has been defined in the SPOOL keyword parameter for the NATUTM macro. However, the RMSPOOL user exit was found neither in the non-reentrant nor in the reentrant part.
Action Either link the user program with the RMSPOOL entry name to the front-end or reentrant part or correct the SPOOL keyword parameter for the NATUTM macro.

NUI0013 - ERROR IN ENQUEUE ACCESS REQUEST

Explanation Error when calling the ENQAR macro.
Action See the error code for the ENQAR macro in the corresponding BS2000/OSD documentation.

NUI0014 - ERROR IN ENTER NATSPOOL PRINT TASK

Explanation Error when calling the ENTER macro for the Natural Advanced Facilities printer task.
Action See the error code for the ENTER macro in the corresponding BS2000/OSD documentation. Check the parameter definition for the ENTER macro call in the SPOOL keyword parameter for the NATUTM macro.

NUI0016 - NATURAL NUCLEUS NOT LINKED

Explanation The Natural nucleus could not be found in the Natural load pool.
Action Link the Natural nucleus to the reentrant part.

NUI0017 - THE DEFINITION OF "TERMTAB=SWP" IS ONLY ALLOWED FOR A GLOBAL SWAP POOL

Explanation The terminal control table can be allocated in a global swap pool only.
Action Change the operand of keyword parameter TERMTAB or generate a global swap pool.

NUI0018 - ERROR IN POSSIG FOR SPOOL PRINT TASK

Explanation Error when calling the POSSIG macro for the Natural Advanced Facilities printer task.
Action See the error code for the POSSIG macro in the corresponding BS2000/OSD documentation.

NUI0020 - ERROR IN RDTFT OR FSTAT BY LINKNAME N-A-M-E

Explanation Error when calling the RDTFT or FSTAT macro for the Natural swap file.
Action See the error code for the RDTFT or FSTAT macro in the corresponding BS2000/OSD documentation. Check the link name defined for the swap file in the openUTM startup job. The link name for the Natural swap file is PAMNAT.

NUI0021 - ERROR IN REQM/RELM FOR TASK USER THREAD

Explanation Error when calling the REQM or RELM macro for the task-related Natural user thread (MAXSIZE).
Action See the error code for the REQM or RELM macro in the corresponding BS2000/OSD documentation.

NUI0022 - INVALID VERSION OF MACRO BS2STUB

Explanation The version number does not match the driver version.
Action Use the correct version of macro BS2STUB.

NUI0023 - SIZE OF NATURAL ROLL FILE TOO SMALL

Explanation The minimum size for one compressed Natural user work area is not available (see parameter ROLLTSZ of macro NATUTM).
Action Calculate the necessary size of the Natural roll file as follows:

ROLLTSZ / 2 * max. number of users = nnn

where nnn is the number of PAM pages

Define a new Natural roll file with the BS2000/OSD file command. The maximum number of users should be the maximum number of active users (including those not logged out properly - these are all users registered in the task file table).

NUI0025 - MODULE NATSTUB NOT LINKED

Explanation The NATSTUB module could not be found in the Natural load pool.
Action Link the Natural nucleus to the reentrant part.

NUI0026 - INITIAL. ERROR REPRO-2000: nn

Explanation The REPRO-2000 spool system has signaled an initialization error (nn).
Action See the corresponding REPRO-2000 spool system documentation.

NUI0027 - LINK-ERROR FOR CSECT/ENTRY P-R-O-G-R-A-M

Explanation The P-R-O-G-R-A-M module is not linked to the front-end part but defined to the NATUTM macro by the keyword parameters LINK, LINK2, LINK3 or LINK4.
Action Check the specifications within the LINK, LINK2, LINK3 or LINK4 keyword parameters for the NATUTM macro and the INCLUDE statements in the link job for the non-reentrant part.

NUI0028 - DEFINED NUAADDR IS TOO HIGH (NOT BELOW THE 16-MB LINE)

Explanation The address defined for the Natural user work area in an operand of keyword parameter NUAADDR is not correct.
Action See the description of keyword parameter NUAADDR in the section Natural under openUTM (in the Natural TP Monitor Interfaces documentation).

NUI0029 - NATSPOOL PRINTER TASK(S) NOT AVAILABLE

Explanation The event request to the Natural Advanced Facilities printer task(s) has not been satisfied.
Action Start the Natural Advanced Facilities printer task(s) before you start your openUTM application.

NUI0032 - DEFINED NUAADDR IS ALREADY OCCUPIED AND CANNOT BE USED

Explanation The address defined in the operand of keyword parameter NUAADDR in macro NATUTM is already occupied.
Action Review all defined addresses for the common memory pools of the application and define a free address for the Natural user work area.

NUI0036 - SYSTEM ERROR ! ... PLEASE GIVE KDCOFF

Explanation An unrecoverable system error has occurred which makes it impossible to continue running the Natural openUTM application.
Action The application must be terminated with KDCSHUT NORMAL/DUMP. Check the corresponding NUInnnn error message on your operator console and/or in the SYSLST file LST.UTM-Anwendungsname.TSN.

NUI0037 - ERROR IN MINF SVC

Explanation Error when calling the MINF macro for the Natural user work area.
Action See the error code for the MINF macro in the corresponding BS2000/OSD documentation and contact Software AG Support.

NUI0038 - MINF FOR AN AREA GREATER 32 MB NOT POSSIBLE

Explanation The parameter MAXSIZE in macro NTSWPRM is defined with a value greater than 32 MB.
Action Correct the operand of parameter MAXSIZE in macro NTSWPRM.

NUI0040 - FRONT AND REENTRANT PART HAVE A DIFFERENT ADDRESS MODE OR FRONT PART LOCATION

Explanation The operand of the PARMOD keyword parameter in macro NATUTM is not identical with the one specified for the NURENT macro.
Action Check the operand defined for keyword parameter PARMOD in the assembly job for macros NATUTM and NURENT. They must be identical.

NUI0042 - ENTRY ADDRESS OF ADABAS LINK MODULE NOT FOUND OR DUPLICATE ENTRIES

Explanation Either the module ADALNN is not linked to the front-end part or the operand of keyword parameter ADACALL in macro NATUTM is defined with ADACALL=ADABAS and the module ADAUTM is linked to the front-end part.
Action Check the link job of the front-end part and review the definition of keyword parameter ADACALL in the assembly job for macro NATUTM.

NUI0045 - CLEAR CHARACTER "BLANK" RESP. HEX."40" NOT ALLOWED FOR UTM KB AND SPAB.

Explanation The operand of max parameter CLRCH in KDCDEF is defined with CLRCH=C' ' or CLRCH=X'40'.
Action Define another CLEAR character in KDCDEF.

NUI0046 - ROLLACC=UPAM-SY IS NOT PERMITTED WHEN A GLOBAL SWAP POOL IS TO BE USED.

Explanation Synchronous write to the Natural roll file is only possible if Natural works with a local swap pool.
Action Either change the operand of parameter ROLLACC in macro NATUTM to UPAM-AS resp. FASTPAM or define a local swap pool with macro ADDON for assembling macro BS2STUB.

NUI0047 - LOGIC FOR SWAP POOL SERIALIZATION (ENQUEUE/DEQUEUE YES/NO) IS NOT COMPATIBLE

Explanation The global swap pool is initialized with the enqueue/dequeue logic for the swap pool serialization and the global variable ENQDEQ in macro NATUTM is set to NO.
Action Contact Software AG Support.

NUI0048 - VORGANGSEXIT NUERROR NOT DEFINED

UTM-TACS: YYYYYYYY/ZZZZZZZZ

YYYYYYYY represents the openUTM TAC Vorgang.
ZZZZZZZZ represents the openUTM TAC Actual.
Explanation For the Natural openUTM driver or one or more openUTM partial programs, the Vorgangsexit NUERROR is not defined.
Action Correct the operand EXIT in the TAC definition for the adequate openUTM TACs and define EXIT=NUERROR in KDCDEF.

NUI0049 - MODULE NURENT NOT FOUND IN LOAD POOL AND FRONT PART

Explanation The assembled module of macro NURENT could not be found.
Action Link the assembled module of macro NURENT to the reentrant part or to the front-end part if a shared Natural nucleus is to be used.

NUI0050 - VERSION OF "MULTI-PASS" NOT COMPATIBLE

Explanation The used MULTI-PASS version is not compatible to the used Natural openUTM driver (NATUTM macro).
Action Use the correct MULTI-PASS version and system maintenance level (NTMODEM and NTMVCHK macros).

NUI0051 - SWAP POOL PARAMETER MODULE (ACMSPRM) NOT FOUND

Explanation The swap pool parameter module is neither linked to the front-end nor to the reentrant part of the application.
Action Assemble the swap pool parameter module (macro NTSWPRM) and link it to the front-end or reentrant part of your application.

NUI0052 - ERROR IN REQM FOR AN ASYNCHRONOUS TRANSACTION

Explanation Error when calling the REQM macro for the Natural user thread of an asynchronous transaction.
Action See the error code for the REQM macro in the corresponding BS2000/OSD documentation.

NUI0053 - OPERAND OF NUCNAME (NAME OF NATURAL NUCLEUS) NOT FOUND

Explanation The operand of keyword parameter NUCNAME in macro NATUTM or macro NTPRM (Natural parameter module) is not defined.
Action Define the name of the linked Natural reentrant part in the operand of keyword parameter NUCNAME of macro NATUTM or macro NTPRM (this name is also the name of the Natural load pool.)

NUI0054 - MODULE NATINV NOT LINKED AT FIRST OR INCORRECT VERSION

Explanation Either the module NATINV is not linked as first module in the reentrant part or the version of NATINV is not correct.
Action Link the correct version of module NATINV as first module to the reentrant part of your application.

NUI0055 - MODULE N-A-M-E NOT FOUND OR INCORRECT VERSION

Explanation Either the module N-A-M-E was not found or an incorrect version was going to be used.
Action Link the correct version of the module to your Natural openUTM application.

NUI0056 - GLOBAL SWAP POOL ONLY ALLOWED WITH GLOBAL BUFFER POOL

Explanation The application was started with a global swap pool and a local Natural buffer pool. However, a global swap pool is allowed in combination with a global buffer pool only.
Action Either generate your application with a global Natural buffer pool or use a local swap pool.

NUI0057 - INCORRECT SWAP POOL PARAMETER MODULE

Explanation An incorrectly assembled swap pool parameter module has been linked to your application.
Action Correct the errors that occurred when assembling macro NTSWPRM.

NUI0059 - LENGTH OF ROLL THREAD SIZE (ROLLTSZ) IS DIFFERENT IN USED SWAP POOL

Explanation Your application works with a global swap pool which is initialized from another application with a different roll thread size.
Action Correct the operand of keyword parameter ROLLTSZ in macro NATUTM. The operand of keyword parameter ROLLTSZ must be the same for all applications which work with the same global swap pool.

NUI0060 - ENTRY N-A-M-E IN ADD-ON TABLE OF BS2STUB NOT FOUND

Explanation The entry N-A-M-E could not be found in the add-on table of the assembled macro BS2STUB.
Action Define the entry N-A-M-E with macro ADDON and assemble macro BS2STUB.

NUI0061 - OPERAND OF PARAMETER APPLNAM (NATUTM) AND APPLINAME (KDCDEF) IS DIFFERENT

Explanation The operand defined for keyword parameter APPLNAM in macro NATUTM is different from the operand of parameter APPLINAME in your KDCDEF definition.
Action Correct the operand of keyword parameter APPLNAM in macro NATUTM.

NUI0063 - NATURAL SWAP POOL SIZE IS LESS THAN USER SLOT SIZE

Explanation The size of the Natural swap pool is less than the size of one swap pool user slot (parameter SWPSLSZ in macro NTSWPRM).
Action Enlarge the Natural swap pool; correct the parameter size in macro ADDON resp. module CMPSTART.

NUI0064 - COMMON MEMORY CONTROL POOL IS FULL

Explanation No free space in the control pool available.
Action Clear the control pool using the SYSTP utility function E and subfunction C; type clear in the command line.

NUI0065 - ERROR IN ENAMP RESP. REQMP FOR NAF COMMUNICATION

Explanation Error when calling the ENAMP or REQMP macro for the common memory pool for the communication with Natural Advanced Facilities.
Action See the error code for the ENAMP or REQMP macro in the corresponding BS2000/OSD documentation.

NUI0067 - LFH=YES DEFINED, BUT ADDRESS ADAVP NOT FOUND

Explanation The Adabas large file handler is to be used (keyword parameter LFH in macro NATUTM is defined with LFH=YES), but the module ADAVP is not linked to the front-end part.
Action Link the module ADAVP to the front-end part.

NUI0068 - ROLL FILE NAME NOT IDENTICAL WITH ROLL FILE OF GLOBAL SWAP POOL

Explanation More than one application is to work with a global swap pool, but the name of the Natural roll file is different from the roll file name in the application which has initialized the global swap pool.
Action Change the name of the Natural roll file in the start job of the Natural openUTM application.

NUI0069 - THE DEFINED LOCAL SWAP POOL ALREADY EXISTS

Explanation A local swap pool can only be used by one application.
Action Change the operand of parameter NAME in macro ADDON for the swap pool and assemble macro BS2STUB.

NUI0070 - OPERAND OF TCTSVE NOT IDENTICAL WITH GLOBAL SWAP POOL

Explanation More than one application is to work with a global swap pool, but the second operand of keyword parameter TERMTAB in macro NATUTM is different from keyword parameter TERMTAB in the application which has initialized the global swap pool.
Action Correct the second operand of parameter TERMTAB. The operands of parameter TERMTAB must be identical in all applications which are to work with the same global swap pool.

NUI0071 - OPERAND OF TERMTAB AND/OR SWPUSID NOT IDENTICAL WITH GLOBAL SWAP POOL

Explanation More than one application is to work with a global swap pool, but the operand(s) of keyword parameter TERMTAB and/or SWPUSID in macro NATUTM is different from these keyword parameters in the application which has initialized the global swap pool.
Action Correct the keyword parameter TERMTAB and/or SWPUSID in the assembly job for macro NATUTM.

NUI0072 - LOCAL SWP RESP. THE ROLL FILE IS USED BY ANOTHER APPLICATION

Explanation The defined local swap pool or the Natural roll file is already used by another application.
Action Change the operand of parameter NAME in macro ADDON for the local swap pool and/or create another Natural roll file. Change the name of the roll file in your start job for the application.

NUI0073 - ERROR DURING CLOSE NATURAL ROLL FILE (FASTPAM: LINK=AAAAAAAA)

AAAAAAAA represents the FASTPAM link name.
PAMNAT represents the name of the FASTPAM link for WRITE.
PAMNATRD represents the name of the FASTPAM link for READ.
Explanation The access method for the Natural roll file is FASTPAM and an error has occurred while the Natural roll file was being closed.
Action Contact Software AG Support.

NUI0074 - ERROR FROM DISABLE FASTPAM AAAAAAAA FOR BBBBB

AAAAAAAA represents I/O-AREA POOL or ENVIRONMENT.
BBBBB represents WRITE or READ.
Explanation The access method for the Natural roll file is FASTPAM and an error has occurred while the FASTPAM environment was being disabled, respectively while the FASTPAM I/O area pool was being disabled for WRITE or READ.
Action Contact Software AG Support.

NUI0075 - NATURAL PARAMETER MODULE NOT FOUND

Explanation The Natural parameter module is neither linked to the reentrant nor to the front-end part of the application.
Action Assemble and link the Natural parameter module to the reentrant or to the front-end part of the application.

NUI0077 - ERROR FROM FILE MACRO CALL FOR FASTPAM LINK NAME "PAMNATRD"

Explanation The access method for the Natural roll file is FASTPAM and an error has occurred when calling the FILE macro for the link name PAMNATRD.
Action Contact Software AG Support.

NUI0078 - MAX. 5 NATURAL UTM APPLICATIONS CAN WORK WITH ONE GLOBAL SWAP POOL

Explanation
  1. The global swap pool is resp. was used by five different Natural openUTM applications.

  2. The global swap pool is in an inconsistent state after an initialization failure.

Action Terminate and restart the global swap pool or define a new swap pool for the application.

Check the protocol of the first started openUTM task for swap pool initialization failure messages, such as NUI0124.

NUI0080 - ERROR FROM REQM SVC FOR FASTPAM ACCESS LISTS

Explanation Error when calling the REQM macro for the FASTPAM access lists.
Action See the error code for the REQM macro in the corresponding BS2000/OSD documentation.

NUI0081 - ERROR FROM ENAEI SVC DURING ENABLE FASTPAM EVENT ITEM

Explanation Error when calling the ENAEI macro for the FASTPAM event item.
Action See the error code for the ENAEI macro in the corresponding BS2000/OSD documentation.

NUI0082 - ERROR FROM DSOFEI SVC (PREPARE FASTPAM EVENT LIST)

Explanation Error when calling the DSOFEI macro for the FASTPAM event list.
Action See the error code for the DSOFEI macro in the corresponding BS2000/OSD documentation.

NUI0085 - ERROR DURING ENABLE FASTPAM ENVIRONMENT FOR AAAA

AAAA represents "asynchronous writes" or "synchronous reads".
Explanation The FASTPAM environment for asynchronous writes resp. synchronous reads could not be enabled.
Action Contact Software AG Support.

NUI0086 - ERROR DURING ENABLE FASTPAM I/O AREA POOL FOR AAAA

AAAA represents "asynchronous writes" or "synchronous reads".
Explanation The FASTPAM I/O area for asynchronous writes resp. synchronous reads could not be enabled
Action Contact Software AG Support.

NUI0087 - FASTPAM ERROR DURING OPEN AAAA DMS ERROR: NNNN

AAAA represents OUTIN, INOUT or INPUT.
NNNN represents the DMS error code.
Explanation Error when trying to open the Natural roll file for FASTPAM.
Action Issue the BS2000/OSD command /HELP NNNN.

NUI0088 - FASTPAM ERROR DURING ASYNCHRONOUS WRITE

Explanation An error has occurred during an asynchronous write to the Natural roll file via FASTPAM.
Action Contact Software AG Support.

NUI0089 - FASTPAM ERROR DURING SYNCHRONOUS AAAA

AAAA represents write or read.
Explanation An error has occurred during a synchronous write respectively read to/from the Natural roll file via FASTPAM.
Action Contact Software AG Support.

NUI0090 - MODULE BS2STUB NOT FOUND OR BS2STUB EXHIBITS A DIFFERENT ADDRESS MODE

Explanation The assembled module of macro BS2STUB is not linked to the front part of the application or the operand of parameter PARMOD in macro BS2STUB contains a different addressing mode than parameter PARMOD in macro NATUTM.
Action Correct the addressing mode (24/31) in the operand of parameter PARMOD for assembling macro BS2STUB.

NUI0091 - THE MODULE BS2STUB IS LINKED, ADD-ON PRODUCT TABLE NOT AVAILABLE OR INVALID.

Explanation The BS2STUB module is linked to the front-end part of your application, but no add-on table has been found or the add-on table is invalid. An error has occurred in the ADDON macro when assembling the module BS2STUB.
Action Correct the error, reassemble and link.

NUI0092 - ERROR IN AAAA DURING EXECUTION OF ADD-ON TABLE ENTRY BBBB

AAAA represents the name of the called macro.
BBBB represents the name of the adequate common memory pool.
Explanation Error when calling the macro AAAA during execution of add-on table entry BBBB.
Action See the error code for the AAAA macro in the corresponding BS2000/OSD documentation.

NUI0093 - A COMMON MEMORY POOL WITH NAME AAAA IS ALREADY AVAILABLE

AAAA represents the name of the common memory pool.
Explanation A new common memory pool is to be enabled but a common memory pool with the defined name is already available.
Action Change the operand of parameter NAME in macro ADDON's call to assemble macro BS2STUB, reassemble and link.

NUI0303 - INVALID BLKSIZE FOR ROLL FILE SPECIFIED

Explanation In the FILE command, an invalid block size was specified for the Natural roll file.
Action Do not specify a block size in the FILE command for the roll file (LINK=PAMNAT).

NUI0304 - NEW NATURAL ROLL FILE FOR AN OLD GLOBAL SWAP POOL

Explanation An old global swap pool is available and a new Natural roll file was allocated.
Action Terminate and restart the swap pool.

NUI0305 - REDUCED OR INCREASED ROLL FILE SIZE FOR AN OLD GLOBAL SWAP POOL

Explanation An old global swap pool is available and the size of the roll file was reduced or increased.
Action Terminate and restart the swap pool.

NUSnnnn Messages

The following Natural openUTM Interface error messages are caused by user session errors.

NUS0001 - OPERAND OF PARAMETER KB=NNN IN KDCDEF TOO SMALL - MINIMUM IS NNN BYTES

NNN represents the minimum KB length in bytes.
Explanation The openUTM driver needs a larger KB length than is defined in KDCDEF.
Action Start the KDCDEF again with the corrected KB length.

NUS0002 - DMS-ERROR AAAA DURING ROLL FILE OPERATION

AAAA represents the DMS error code.
Explanation Error when trying to access the Natural roll file.
Action Issue the BS2000/OSD command /HELP AAAA.

NUS0024 - ERROR IN SOLSIG FOR ASYNCHRONOUS WRITE

Explanation Error when calling the SOLSIG macro for asynchronous writing to the Natural roll file.
Action See the error code for the SOLSIG macro in the corresponding BS2000/OSD documentation.

NUS0030 - ERROR IN FILE EVENT CONTROL BLOCK DURING ASYNCHRONOUS WRITE

Explanation During an asynchronous write to the Natural roll file, the file event control block contains an error code.
Action Send the dump to Software AG Support.

NUS0031 - NEW NATURAL SESSION INITIATED, PLEASE ENTER UTM TAC:

Explanation openUTM recognized a restart situation when the user tried to log on to the Natural openUTM application. The Natural openUTM driver terminates the transaction with PEND FI.
Action Enter a valid transaction code and press Enter.

NUS0033 - NATURAL ROLL FILE FULL

Explanation The size of the Natural roll file was specified too small.
Action Enlarge the Natural roll file (LINK=PAMNAT).

NUS0034 - ROLL FILE RESP. TERMINAL CONTROL TABLE FULL

Explanation The internal terminal control table is full.
Action If the operand of keyword parameter TERMTAB in macro NATUTM is defined with TERMTAB=(SWP,...), enlarge the Natural roll file. Otherwise, enlarge the number of PAM pages in the operand of keyword parameter TERMTAB.

NUS0035 - PROG. "AAAAAAAA" FPUT ERROR FOR DEST. "BBBBBBBB" UTM KCRC:333 1 4444

AAAAAAAA represents the Natural program name,
BBBBBBBB represents the printer name,
333 1 4444 is the openUTM return code.
Explanation Error with print job using the openUTM command FPUT.
Action See the openUTM return code in the corresponding openUTM documentation.

NUS0043 - ERROR FROM XXXX - UTM RC: ZZZ

XXXX represents SPUT or SGET.
ZZZ represents the openUTM return code.
Explanation Error from openUTM after SPUT or SGET.
Action See the return code in the corresponding openUTM documentation and contact Software AG Support.

NUS0044 - LOADING OF PROGRAM XXXXX FAILED, BIND ERRORCODE: ZZZZ

XXXXX represents the name of the module which is to be loaded dynamically.
ZZZX represents the error code of the BIND macro.
Explanation Error from the BIND macro when dynamically loading a 3GL program.
Action See the error code for the BIND macro in the corresponding BS2000/OSD documentation.

NUS0058 - ERROR FROM CHKEI IN PAM CONTINGENCY ROUTINE

Explanation Error when calling the CHKEI macro in the PAM contingency routine.
Action See the error code for the CHKEI macro in the corresponding BS2000/OSD documentation and contact Software AG Support.

NUS0062 - ERROR FROM MACRO N-A-M-E DURING ACCESS TO SYSLST

Explanation The Natural trace function (ETRACE in macro NTPRM) is activated and an error has occurred when calling macro N-A-M-E during access to SYSLST.
Action See the error code for the N-A-M-E macro in the corresponding BS2000/OSD documentation and contact Software AG Support.

NUS0079 - ERROR FROM RSOFEI SVC (REQUEST FOR FASTPAM ENVIRONMENT)

Explanation Error when calling the RSOFEI macro for requesting a FASTPAM event.
Action See the error code for the RSOFEI macro in the corresponding BS2000/OSD documentation.

NUS0088 - FASTPAM ERROR DURING ASYNCHRONOUS WRITE

Explanation An error has occurred during an asynchronous write to the Natural roll file via FASTPAM.
Action Contact Software AG Support.

NUS0089 - FASTPAM ERROR DURING SYNCHRONOUS AAA

AAA Represents write or read.
Explanation An error has occurred during an asynchronous write or read to or from the Natural roll file via FASTPAM.
Action Contact Software AG Support.

NUS0094 - FORCED CONVERSATIONAL I/O NOT POSSIBLE

Explanation The execution of a forced conversational I/O was not possible. The session is terminated.
Action Contact Software AG Support.

NUS0302 - ERROR DURING RELOCATION AFTER REFRESH NATURAL LOAD POOL

Explanation The Natural load pool was refreshed and a relocation error has occurred.
Action Send a dump to Software AG Support.

NUWnnnn Messages

The following Natural openUTM Interface error messages are warnings.

NUW0019 - WARNING - ERROR IN CSTAT MACRO AFTER ATTEMPT TO DECLARE THE SWP DIRECTORY AS A RESIDENT DIRECTORY

Explanation The operand of parameter SWDPAGE was defined with value NO and an error has occurred when calling macro CSTAT, parameters LINK=DYNPRM.
Action See the error code for the CSTAT macro in the corresponding BS2000/OSD macro.

NUW0039 - WARNING - PARMOD=(31,ABOVE) DEFINED, BUT THE FRONT PART IS LOADED BELOW THE LINE

Explanation The operand PARMOD of keyword parameter PARMOD in macro NATUTM is defined with PARMOD=(31,ABOVE), but the front part is loaded below the 16-MB line.
Action Correct the link job for the front-end part. The PROG instruction must contain the operand LOADPT=X'ADDRESS' or LOADPT=*XS.

NUW0041 - WARNING - STXIT SVC FAILED WITH RC: NN

NN represents the error code from macro STXIT.
Explanation Error when calling the STXIT macro.
Action See the error code for the STXIT macro in the corresponding BS2000/OSD documentation and contact Software AG Support.

NUW0083 - WARNING - FASTPAM ENVIRONMENT FOR AAAA IS NOT RESIDENT

AAAAA represents asynchronous writes or synchronous reads.
Explanation The FASTPAM environment for asynchronous writes or synchronous reads is not resident.
Action See the description of keyword parameter ROLLACC in the openUTM section of this documentation (precondition for the access method FASTPAM).

NUW0084 - WARNING - FASTPAM I/O AREA POOL FOR AAAA IS NOT RESIDENT

AAAAA represents "asynchronous writes" or "synchronous reads".
Explanation The FASTPAM I/O area pool for "asynchronous writes" or "synchronous reads" is not resident.
Action See the description of keyword parameter ROLLACC in the openUTM section of this documentation (precondition for the access method FASTPAM).