Natural Global Buffer Pool Manager Messages

This section contains the informational and error messages issued by the Natural Global buffer pool manager under z/OS and under z/VSE.

All messages have the format:

GBPnnnn xxxxxxxx: message text

- where:

  • nnnn is the message number.

  • xxxxxxxx is the job name, under which the Natural global buffer pool is running.

For ease of use, the job name message portion has been omitted in the following list of messages. Notation in italics indicates a variable message portion.

The following topics are covered below:


Natural Global Buffer Pool Manager Syntax Error Messages

The Natural global buffer pool manager syntax error messages are self-explanatory with xxxx being the invalid command or parameter.

For appropriate command and parameter syntax, refer to Natural Global buffer pool manager under z/OS and Natural Global buffer pool manager under z/VSE in the Operations documentation.

Message Number Message Text
GBP0001 Invalid command: xxxx
GBP0002 More than one command specified
GBP0003 Invalid parameter keyword: xxxx
GBP0004 Buffer pool name parameter missing
GBP0005 Invalid buffer pool name: xxxx
GBP0006 Leading parenthesis missing in NATBUFFER
GBP0007 Ending parenthesis missing in NATBUFFER
GBP0008 Buffer pool size not numeric: xxxx
GBP0009 Buffer pool size less than 100K: xxxx
GBP0010 Buffer pool size too large: xxxx
GBP0011 Invalid MODE specified: xxxx
GBP0012 Text block size not numeric: xxxx
GBP0013 Text block size must be 1,2,4,8,12 or 16, not xxxx
GBP0014 Invalid buffer pool type: xxxx
GBP0015 Invalid preload list name: xxxx
GBP0016 Invalid sub-system ID: xxxx
GBP0017 IDLE time not numeric: xxxx
GBP0018 IDLE time out of valid range: xxxx
GBP0019 Buffer pool cache size not numeric: xxxx
GBP0020 Buffer pool cache size out of valid range: xxxx
GBP0021 RESIDENT must be Y or N or A, not xxxx
GBP0022 METHOD must be S or N, not xxxx
GBP0023 CONFIRM must be Y or N, not xxxx
GBP0024 PLUGIN must be BP or NOBP, not xxxx
GBP0025 REGISTER must be Y or N, not xxxx
GBP0029 NAT buffer pool size less than 256K: xxxx

Natural Global Buffer Pool Manager Run-Time Messages

In the following table, error-info format is:

failing function (macro), sub-function, request return (RC) or cancel code (CC), request failure reason code

Please see the relevant IBM documentation for an explanation of the return or abend codes of the relevant IBM request macro.

Message Number Message Text
GBP0000 xxxx (dummy message consisting only of a variable message part)
GBP0098 Parameter module missing or invalid: pgm-name
GBP0099 Message text module missing or invalid: pgm-name
GBP0100 No parameters specified
GBP0101 Specified parms: xxxx
GBP0102 Operator input: xxxx
GBP0103 Input from file: xxxx
GBP0104 Mandatory module missing or invalid: pgm-name
GBP0105 Storage could not be obtained: xxxx
GBP0106 FREEMAIN not successful
GBP0107 NAME/TOKEN service failure: error-info
GBP0108 Buffer pool manager module incompatible: pgm-name
GBP0109 Pool (de)allocation failure: error-info
GBP0110 GBP not active: gbp-name/subsid
GBP0111 GBP active: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr
GBP0112 GBP refreshed: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr
GBP0113 GBP stopped: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr
GBP0114 GBP already active: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr
GBP0115 GBP still in use: gbp-name/subsid - DIR=dir-addr ADDR=gbp-addr
GBP0116 Associated GBP has been lost gbp-name/subsid
GBP0117 Shutdown forced for GBP gbp-name/subsid
GBP0118 Reply Y to force shutdown of GBP gbp-name/subsid
GBP0119 Shutdown aborted, reply was x
GBP0120 Creating cache for GBP: gbp-name/subsid
GBP0121 Deleting cache for GBP: gbp-name/subsid
GBP0122 GBP cache creation failure: error-info
GBP0123 GBP cache deletion failure: error-info
GBP0124 GBP cache created: cache-name,cache-token,cache-ALET
GBP0125 GBP cache deleted: cache-name,cache-token,cache-ALET
GBP0126 ALET stack overflow. Cannot create GBP cache
GBP0127 Cache already exists for GBP: gbp-name/subsid
GBP0128 No cache available for GBP: gbp-name/subsid
GBP0129 GBP cache not owned by job job-name
GBP0130 No global buffer pool available for SUBSID: subsid
GBP0131 List of all global buffer pools with SUBSID: subsid
GBP0132 BP-Name/SUBSID Size(KB) A(GBP) A(DIR) ALET Cache Size Cache Owner
GBP0133 About to shutdown the following global buffer pools
GBP0134 Reply Y to continue shutdown of global buffer pools
GBP0135 No global buffer pool matching selection criteria
GBP0136 Job does not own GBP cache(s)
GBP0137 GBP cache(s) owned by job job-name
GBP0138 Data space cache not supported in non-ESA environment
GBP0139 GBP(s) owned by job: job-name
GBP0140 RESIDENT=N ignored due to owning GBP cache(s):
GBP0141 TERMINATE aborted due to owning GBP cache(s):
GBP0142 RESIDENT=N ignored due to owning GBP(s):
GBP0143 TERMINATE aborted due to owning GBP(s):
GBP0144 GBP not allocated due to user key pool not possible
GBP0145 Global parameter settings: xxxx
GBP0149 Service request failure: service, error-info
GBP0150 Formatted dump
GBP0151 Formatted dump for GBP gbp-name/subsid
GBP0154 Global buffer pool manager not operational
GBP0158 Bad retcode from NATBPMG4, function REINIT: rtc
GBP0159 Bad retcode from NATBPMG4, function INIT: rtc
GBP0197 No Zaps applied
GBP0198 Applied Zaps:
GBP0199 Natural Global Buffer Pool Manager Version: xxxx

Natural Global Buffer Pool Manager Driver Messages

In the following table, error-info format is:

failing function (macro), sub-function, request return (RC) or cancel code (CC), request failure reason code

Please see the relevant IBM documentation for an explanation of the return or abend codes of the relevant IBM request macro.

The following messages are listed below:

Messages Issued by the Global Buffer Pool Manager Operating-system-dependent Driver Modules

Message Number Message Text
GBP0200 Specified file does not exist: file-name
GBP0201 Reading parm input from file file-name
GBP0202 EOF encountered reading file file-name
GBP0203 Error reading file file-name
GBP0204 Subsystem storage protection feature is required
GBP0205 Insufficient authorization: error-info
GBP0206 Job cancelled by operator
GBP0207 Job cancelled due to unrecoverable abend abend-code

Messages Issued by the Global Buffer Pool Manager z/OS Driver Module

Message Number Message Text
GBP0300 Sorry, z/OS is required
GBP0301 Only MODIFY or STOP commands allowed
GBP0302 STOP command received from operator

Messages Issued by the Global Buffer Pool Manager z/VSE Driver Module

Message Number Message Text
GBP0400 Sorry, VSE/ESA 2.4 or higher is required
GBP0401 Ready for communications
GBP0402 No input received from operator
GBP0403 Job cancelled due to JCL overrun