PROCESS REPORTER ACTION
|
|||||||||||
|
|
|
||||||||||
INITIALIZE
|
|||||||||||
TERMINATE
|
|||||||||||
|
|
OPEN
|
|
|||||||||
CLOSE
|
|||||||||||
REPLACE-TABLE
|
|
operand1
|
|
||||||||
SET-PRINTER
|
WITH
|
||||||||||
SET-PRINT-OPTIONS
|
PARAMETERS-clause | ||||||||||
PRINT
|
|||||||||||
PREVIEW |
|||||||||||
EDIT
|
|
WITH
|
|
operand1
|
|
||||||
| PARAMETERS-clause | |||||||||||
[GIVING
operand2]
|
|||||||||||
This document covers the following topics:
For an explanation of the symbols used in the syntax diagram, see Syntax Symbols.
The PROCESS REPORTER statement is used to communicate with
the Natural Reporter from within a program, instructing the reporter to perform
a particular action.
For a description of the reporter, please refer to the Natural Reporter online help.
Note:
For actions that apply to a specific report, you may abbreviate the
second keyword to REPORT. This is only to enhance the readability
of your programs; Natural does not distinguish between the written-out and
abbreviated forms of the keyword.
Operand Definition Table:
| Operand | Possible Structure | Possible Formats | Referencing Permitted | Dynamic Definition | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
operand1
|
C | S | A | N | P | I | F | B | D | T | L | yes | no | |||||||
operand2
|
S | N | P | I | yes | no | ||||||||||||||
Syntax Element Description:
| Syntax Element | Description |
|---|---|
ACTION
|
Actions:
You can specify one of the following actions to be performed by the reporter: |
INITIALIZE
|
Initialize Reporter:
This action initializes and loads the reporter. This must always be the first action to be performed. |
TERMINATE
|
Terminate Reporter:
This action terminates and unloads the reporter. This must always be the last action to be performed. |
OPEN
|
Open Report:
This action opens a specified report, and returns a handle which can be used to identify the report for subsequent actions. |
CLOSE
|
Close Report:
This action closes a specified report, after which the report handle can no longer be used. |
REPLACE-TABLE
|
Replace Table:
This action replaces the path name of a table. |
SET-PRINTER
|
Select Printer:
This action selects a printer to be used for subsequent printing of
all reports. The print method for the selected printer must be set to
|
SET-PRINT-OPTIONS
|
Set Print Options:
This action is used to set print options for a specified report. |
PRINT
|
Print Report:
This action prints a specified report on the currently selected printer. |
PREVIEW
|
Preview Report:
This action previews a specified report, based on the currently selected printer. |
EDIT
|
If no report is specified, this action shows the main reporter window. If a report is specified, this action shows the main reporter window together with the edit window for the specified report. |
WITH
|
WITH Clause:
As |
PARAMETERS-clause
|
PARAMETERS Clause: Alternatively to
the WITH clause, you can use the PARAMETERS
clause described below.
|
GIVING
operand2
|
GIVING Clause:
With the As The response code is returned in format/length I4. Response code 0 indicates that the action was successful. Any other
response code corresponds to a Natural system error number
( |
PARAMETERS
{parameter-name=operand1}
|
END-PARAMETERS
|
With this clause, you specify the parameter(s) by name (instead of by position):
For this action, you specify as first parameter the name of the report to be opened (without .rpt extension or path specification), and as second parameter the field to receive the handle. The format/length of the first parameter must be compatible with A8, that of the second parameter with I4.
The report is searched for in the logon library's RES subdirectory
first, then in the RES subdirectory of each steplib, then in the directory
assigned to the environment variable
NATGUI_BMP.
Note that the report data is first searched for in the path specified when the report was created (if it exists), then in the directory in which the report was found.
If you use the
PARAMETERS-clause, the
parameter-name must be:
REPORT-NAME for the report name
REPORT-ID for the handle field
See also Example 1 - Parameters for OPEN Action.
For this action, you specify as first parameter the handle identifying the report to which the action is to be applied, as second parameter the work file number, and, optionally, as third parameter the table name. The format/length of the first two parameters must be compatible with I4, that of the third parameter with A8.
If you use the
PARAMETERS-clause, the
parameter-names must be
REPORT-ID, WORK-FILE and TABLE-NAME
respectively.
See also Example 2 - Parameters for REPLACE-TABLE Action.
For this action, you specify as
operand1 the logical device name (LPT1
to LPT31) of the printer to be selected. The format/length of
operand1 must be compatible with
A8.
If you use the
PARAMETERS-clause, the
parameter-name must be
DEVICE-NAME.
See also Example 3 - Parameter for SET-PRINTER Action.
For this action, you specify as first parameter (No. 1 in the table below) the handle identifying the report to which the action is to be applied, followed by the printer options to be set - all of which are optional. If a parameter is omitted, the corresponding option remains unchanged.
| Sequence No. | Parameter |
|---|---|
| 1 |
This parameter (which must be compatible with format/length I4) is the handle identifying the report to which the action is to be applied. The |
| 2 |
This parameter (which must be compatible with format/length I2)
is one of the paper-size constants defined in the local data area
parameter-name must be
PAPER-SIZE. * |
| 3 and 4 |
These parameters (which must be compatible with format/length I2)
are the paper width and height respectively (in twips; 1 twip = 1/1440 inches).
These parameters are only used with paper size If you use the
|
| 5, 6, 7 and 8 |
These parameters (which must be compatible with format/length I2) specify the left, top, right and bottom margins respectively (in twips). The |
| 9 |
This parameter (which must be of format L) is the paper orientation:
This parameter is not used with paper size
The |
| 10 |
This parameter (which must be of format L) is the fast (text only) print option:
parameter-name must be
FAST-PRINT. * |
| 11 |
This parameter (which must be of format L) determines whether records that consist entirely of blanks are to be suppressed in the output:
parameter-name must be SUPPRESS-
BLANK-LINES. * |
| 12 |
This parameter (which must be of format L) determines whether successive records with identical data are to be ignored:
parameter-name must be
IGNORE-DUPLICATES. * |
| 13 |
This parameter (which must be of format L) determines whether a printer selection dialog is to be displayed during printing:
parameter-name must be
SHOW-PRINT-DIALOG. * |
| 14 |
This parameter (which must be compatible with format/length I2)
is one of the paper-source constants defined in the local data area
parameter-name must be
PAPER-SOURCE. * |
Note:
* If you use the
PARAMETERS-clause.
See also Example 4 - Parameters for SET-PRINT-OPTIONS Action.
For these actions, you specify as
operand1 the handle identifying the
report to which the action is to be applied. The format/length of
operand1 must be compatible with
I4.
If you use the
PARAMETERS-clause, the
parameter-name must be
REPORT-ID.
See also Example 5 - Parameters for CLOSE, PRINT, PREVIEW, EDIT Actions.
PROCESS REPORT ACTION OPEN WITH 'MYREPORT' #HANDLE
PROCESS REPORT ACTION OPEN WITH
PARAMETERS
REPORT-NAME = 'MYREPORT'
REPORT-ID = #HANDLE
END-PARAMETERS
PROCESS REPORT ACTION REPLACE-TABLE WITH
PARAMETERS
REPORT-ID = #HANDLE
WORK-FILE = 5
END-PARAMETERS
PROCESS REPORTER ACTION SET-PRINTER WITH 'LPT1'
DEFINE DATA LOCAL USING 'NGLUKEY1' END-DEFINE ... PROCESS REPORT ACTION SET-PRINT-OPTIONS WITH #HANDLE A4 0 0 0 0 0 0 FALSE FALSE FALSE FALSE FALSE AUTOMATIC
DEFINE DATA LOCAL USING 'NGLUKEY1' END-DEFINE ... PROCESS REPORT ACTION SET-PRINT-OPTIONS WITH PARAMETERS REPORT-ID = #HANDLE PAPER-SIZE = A4 PAPER-WIDTH = 0 PAPER-HEIGHT = 0 LEFT-MARGIN = 0 TOP-MARGIN = 0 RIGHT-MARGIN = 0 BOTTOM-MARGIN = 0 LANDSCAPE = FALSE FAST-PRINT = FALSE SUPPRESS-BLANK-LINES = FALSE IGNORE-DUPLICATES = FALSE SHOW-PRINT-DIALOG = FALSE PAPER-SOURCE = AUTOMATIC END-PARAMETERS
PROCESS REPORT ACTION PRINT WITH #HANDLE PROCESS REPORT ACTION PREVIEW WITH #HANDLE PROCESS REPORT ACTION CLOSE WITH #HANDLE PROCESS REPORT ACTION EDIT WITH #HANDLE PROCESS REPORTER ACTION EDIT