Version 6.3.8 for Windows
 —  First Steps  —

User Input

You will now learn how to prompt the user for data, that is: a starting name and an ending name for the output.

When you have completed the exercises below, your sample application will consist of the following modules:

Application structure

This document contains the following exercises:


Allowing for User Input

You will now modify your program so that input fields for the starting name and ending name will be shown in the output. This is done using the INPUT statement.

Start of instruction setTo define input fields

  1. Insert the following below END-DEFINE:

    INPUT (AD=MT)
      "Start:" #NAME-START /
      "End:  " #NAME-END

    The session parameter AD stands for "attribute definition", its value "M" stands for "modifiable output field", and the value "T" stands for "translate lowercase to uppercase".

    The "M" value in AD=MT means that the default values defined with INIT (that is: "ADKINSON" and "BENNETT") will be shown in the input fields. Different values may be entered by the user. When the "M" value is omitted, the input fields will be empty even though default values have been defined.

    The "T" value in AD=MT means that all lowercase input is translated to uppercase before further processing. This is important since the names in the demo database file have been defined completely in uppercase letters. When the "T" value is omitted, you have to enter all names completely in uppercase letters. Otherwise, the specified name will not be found.

    "Start:" and "End:" are text fields (labels). They are specified in quotation marks.

    #NAME-START and #NAME-END are data fields (input fields) in which the user can enter the desired starting name and ending name.

    The slash (/) means that the subsequent fields are to be shown in a new line.

    Your program should now look as follows:

    DEFINE DATA
    LOCAL
      1 #NAME-START        (A20) INIT <"ADKINSON">
      1 #NAME-END          (A20) INIT <"BENNETT">
      1 EMPLOYEES-VIEW VIEW OF EMPLOYEES
        2 FULL-NAME
          3 NAME (A20)
        2 DEPT (A6)
        2 LEAVE-DATA
          3 LEAVE-DUE (N2)
    END-DEFINE
    *
    INPUT (AD=MT)
      "Start:" #NAME-START /
      "End:  " #NAME-END
    *
    READ EMPLOYEES-VIEW BY NAME
      STARTING FROM #NAME-START
      ENDING AT #NAME-END
    *
      DISPLAY NAME 3X DEPT 3X LEAVE-DUE
    *
    END-READ
    *
    END
  2. Run the program.

    The output shows the fields you have just defined.

    Output

  3. Use the default names and press ENTER.

    The list of employees is now shown.

  4. Press ENTER repeatedly until you return to the program editor, or press ESC.

  5. Stow the program.

Top of page

Designing a Map for User Input

You are now introduced to a different way of prompting the user for input. You will use the map editor to create a map which contains the same fields that you have previously defined in your program. A map is a separate object and is used to separate the user interface layout from the business logic of an application.

The map you will create now will look as follows:

Map

The first line of the map contains system variables for the current date and time. There are two data fields (input fields) in which the user can specify a starting name and an ending name. The data fields are preceeded by text fields (labels).

The following steps are required for the above map:

Creating a Map

You will now invoke the map editor in which you will design your map.

Leave the program editor open in the background.

Start of instruction setTo create a map

  1. In the library workspace, select the library which also contains your program (that is: select the TUTORIAL node).

  2. From the context menu, choose New Source > Map.

    Or:
    Choose the following toolbar button:

    Map

    An empty map editor window appears.

Defining Text Fields

You will now add two text fields (also called constants or labels) to the map.

Start of instruction setTo define the text fields

  1. From the Insert menu, choose Text Constant.

    Note:
    When the map editor is active, different menus are shown in the menu bar. The menus Insert, Field and Map are now shown (instead of the Programs menu which was visible when the program editor was active).

    Or:
    Choose the following toolbar button:

    Text constant

    Note:
    By default, the toolbar containing this button is shown vertically to the right of the map editor window. A different toolbar was shown there previously when the program editor was active.

  2. Move the mouse to the position in the map editor window at which you want to insert the text constant.

    The mouse pointer changes showing a cross and the symbol for a text constant.

  3. Press and hold down the mouse button.

  4. Drag the mouse to the right until the field has the desired length. For our field a length of about 10 characters is sufficient.

    While dragging the mouse, the current length is shown in the status bar of the application window. The format and the position in the map are also shown there. A text field always has the format A (alphanumeric).

  5. Release the mouse button.

    A text field with a default label is now shown. Handles indicate that the text field is selected. The mouse pointer still shows a cross and the symbol for a text constant and you can immediately draw another text field.

    Note:
    If you want to exit this mode, just click any other position in the map editor.

  6. Draw a second text field below the first text field.

    If the field starts in the wrong column, you can move it by positioning the mouse pointer on this field, pressing and holding down the mouse button and then dragging the mouse to the desired position. When you release the mouse button, the normal mouse pointer is shown again.

Specifying Labels for Text Fields

The text fields you have just inserted do not yet have the correct labels. You will now specify them.

Start of instruction setTo specify the labels

  1. Select the first text field and from the context menu, choose Definition.

    Or:
    Double-click the text field.

    The existing text is selected.

  2. Enter "Start:" as the label for the first text field and press ENTER.

    The text field (for which you have previously defined a length of 10 characters) is automatically resized to the length of this string.

  3. Repeat the above steps and enter "End:" as the label for the second text field.

Defining Data Fields

You will now add two data fields to the map. These are the input fields in which the user can specify the starting name and ending name.

You can define the data fields in two different ways: with the Data Field command where it is your responsibility to define the correct format and length of the data field, or with the Import > Data Field command where you simply select the data field from a list and where the correct format and length is automatically used. These two ways are described below.

Start of instruction setTo define a data field where you have to specify the length

  1. From the Insert menu, choose Data Field.

    Or:
    Choose the following toolbar button:

    Insert data field

  2. Draw the data field at the right of the previously inserted text field for the starting name. Draw it in the same way as a text field. A length of 20 characters is required for the data field (if your field is too short or too long, a later exercise also explains how to modify the length). The data field is automatically filled with "X" characters.

Start of instruction setTo import a data field

  1. From the Insert menu, choose Import > Data Field.

    The Import Data Field dialog box appears.

  2. From the Library drop-down list box, select TUTORIAL.

  3. Select the Program option button.

    All programs that are currently defined in your library are now shown in the Object list box.

  4. Select the program with the name PGM01.

    The importable data fields are now shown at the bottom of the dialog box.

    Import data field

  5. Select the field #NAME-END and choose the Import button.

    The Cancel button in the Import Data Field dialog box is now labeled Quit.

  6. Choose the Quit button to close the Import Data Field dialog box.

    The data field is now shown at the top left of the map. It is filled with "X" characters. Handles indicate that the data field is selected.

  7. Move the data field to the right of the previously defined text field for the end name. To do so position the mouse pointer on this field, press and hold down the mouse button, drag the mouse to the desired position and then release the mouse button.

Specifying Names and Attributes for Data Fields

The following applies only for the data field for the starting name which you have defined manually. It does not apply to the data field for the ending name which you have imported: When you create a new data field for a user-defined variable, Natural assigns a field name to it. This field name contains a number. You have to adjust the names of the newly created fields to the variable names defined in your program.

You will now make sure that the same names are used as in your program: #NAME-START and #NAME-END. The output of these fields (that is: the user input) will be passed to the corresponding user-defined variables in your program.

You will also make sure that the same attributes are defined for both #NAME-START and #NAME-END.

Start of instruction setTo define names and attributes for the data fields

  1. Select the data field for the starting name and from the context menu, choose Definition.

    Or:
    Double-click the data field.

    The Field Definition dialog box appears.

    Field definition

    The Field text box shows the field name that has been assigned by Natural: #FIELD_#1.

  2. In the Field text box, enter "#NAME-START".

    The format must be A. This is selected by default.

  3. In the Length text box, enter "20" (if your field has a different length).

  4. Choose the Attributes button.

    The Attribute Definitions dialog box appears.

    Attribute definitions

  5. Make sure that Output, Modifiable has been selected in the I/O characteristics drop-down list box.

    This defines the field as an output field which can be modified.

  6. Make sure that Translate to Upper Case has been selected in the Upper/Lower case drop-down list box.

    This enables the user to enter the name in lowercase letters. Until now, the names in the demo database could only be found when the names were specified completely in uppercase letters.

  7. In the Filler character text box, enter an underscore (_) character.

    A blank character is defined as the default filler character. Therefore, before you can enter an underscore in this field, you have to delete the blank.

    The filler character is used to fill any empty positions in input fields in the map, allowing the user to see the exact position and length of a field when entering input.

  8. Choose the OK button to close the Attribute Definitions dialog box.

  9. Choose the OK button to close the Field Definition dialog box.

  10. Repeat the above steps for the data field for the ending name. Make sure that the correct field name (#NAME-END), format (A) and length (20) are defined. Make sure that the same attribute definitions are used as for #NAME-START.

Adding System Variables

Natural system variables contain information about the current Natural session, such as the current library, user, or date and time. They may be referenced at any point within a Natural program. All system variables begin with an asterisk (*).

You will now add system variables for the date and time to the map. When the program is run, the current date and time will be displayed in the map.

Start of instruction setTo add system variables

  1. From the Insert menu, choose Import > System Variable.

    Or:
    Choose the following toolbar button:

    Import system variable

    The Import System Variable dialog box appears.

    Import system variable

  2. Scroll to *DAT4I and select it.

  3. Scroll to *TIMX, press CTRL and select it.

  4. Choose the Import button to import the selected variables.

    The Cancel button in the Import System Variable dialog box is now labeled Quit.

  5. Choose the Quit button to close the dialog box.

    Both system variables have been placed at the top left of the map.

  6. Select TT:TT:TT (that is: the system variable for the time) and move it to the end of the first line.

    Note:
    You may have to resize the map editor window to see the end of the line.

Testing a Map

You will now test your map to check whether it works as intended.

Start of instruction setTo test the map

  1. From the Object menu, choose Test.

    Or:
    Choose the following toolbar button:

    Test

    The following output is shown.

    Test

    Note:
    You may have to resize the output window to see the time at the top right.

    The input field for the starting name is automatically selected since it is the first input field in the map. Both input fields contain the filler character.

    Note:
    When working in insert mode, the user has to delete the filler characters before it is possible to enter text. This is not necessary in overwrite mode.

  2. Press ENTER to return to the map editor.

Stowing a Map

When the map has successfully been tested, you have to stow it so that it can be found by your program.

Start of instruction setTo stow the map

  1. Stow the map in the same way as you stow a program.

  2. When you are asked to specify a name for the map, enter "MAP01".

    In the library workspace, a new node named Maps appears below the TUTORIAL node. This node contains the map you have just stowed.

    Leave the map editor open for later modifications.

Top of page

Invoking the Map from Your Program

Once a map has been stowed, it can be invoked by a Natural program using a WRITE or INPUT statement.

Start of instruction setTo invoke the map from your program

  1. Return to the program editor.

    If you cannot see the program editor (for example, because you have previously maximized the map editor window), you can return to an open program editor window by choosing the corresponding command for PGM01 from the bottom of the Window menu.

    You can also double-click the program PGM01 in the library workspace (or when working with the keyboard, select it and press ENTER). When the program has previously been closed, it is opened again. When it it still open in the background, its editor window is brought back to the front.

  2. Replace the previously defined INPUT lines with the following line:

    INPUT USING MAP 'MAP01'

    This will invoke the map you have just designed.

    The map name must be enclosed in single quotation marks to distinguish the map from a user-defined variable.

    Your program should now look as follows:

    DEFINE DATA
    LOCAL
      1 #NAME-START        (A20) INIT <"ADKINSON">
      1 #NAME-END          (A20) INIT <"BENNETT">
      1 EMPLOYEES-VIEW VIEW OF EMPLOYEES
        2 FULL-NAME
          3 NAME (A20)
        2 DEPT (A6)
        2 LEAVE-DATA
          3 LEAVE-DUE (N2)
    END-DEFINE
    *
    INPUT USING MAP 'MAP01'
    *
    READ EMPLOYEES-VIEW BY NAME
      STARTING FROM #NAME-START
      ENDING AT #NAME-END
    *
      DISPLAY NAME 3X DEPT 3X LEAVE-DUE
    *
    END-READ
    *
    END
  3. Run the program.

    Your map is now shown.

  4. Press ENTER repeatedly until you return to the program editor, or press ESC.

  5. Stow the program.

Top of page

Ensuring that an Ending Name is Always Used

As your program is coded now, no data will not be found if an ending name is not specified.

You will now remove the initial values for the starting name and ending name; then the user always has to specify these names. To ensure that an ending name is always used, even if it has not been specified by the user, you will add a corresponding statement.

Start of instruction setTo use the ending name

  1. In the DEFINE DATA block, remove the default values (INIT) for the fields #NAME-START and #NAME-END so that the corresponding lines look as follows:

    1 #NAME-START        (A20)
    1 #NAME-END          (A20)
  2. Insert the following below INPUT USING MAP 'MAP01':

    IF #NAME-END = ' ' THEN
        MOVE #NAME-START TO #NAME-END
    END-IF

    When the #NAME-END field is blank (that is: when an ending name has not been entered by the user), the starting name is automatically used as the ending name.

    Note:
    Instead of using the statement MOVE #NAME-START TO #NAME-END it is also possible to use the following variant of the ASSIGN or COMPUTE statement: #NAME-END := #NAME-START.

    Your program should now look as follows:

    DEFINE DATA
    LOCAL
      1 #NAME-START        (A20)
      1 #NAME-END          (A20)
      1 EMPLOYEES-VIEW VIEW OF EMPLOYEES
        2 FULL-NAME
          3 NAME (A20)
        2 DEPT (A6)
        2 LEAVE-DATA
          3 LEAVE-DUE (N2)
    END-DEFINE
    *
    INPUT USING MAP 'MAP01'
    *
    IF #NAME-END = ' ' THEN
      MOVE #NAME-START TO #NAME-END
    END-IF
    *
    READ EMPLOYEES-VIEW BY NAME
      STARTING FROM #NAME-START
      ENDING AT #NAME-END
    *
      DISPLAY NAME 3X DEPT 3X LEAVE-DUE
    *
    END-READ
    *
    END
  3. Run the program.

  4. In the resulting map, enter "JONES" in the field which prompts for a starting name and press ENTER.

    Note:
    Since Translate to Upper Case has been specified for this field, it is now also possible to enter the name in lowercase letters.

    In the resulting list, only the employees with the name "Jones" are now shown.

  5. Press ENTER to return to the program editor.

  6. Stow the program.

You can now proceed with the next exercises: Loops and Labels.

Top of page