Version 6.3.8 for OpenVMS
 —  Messages and Codes  —

Natural System Error Messages 3151-3200

NAT3151: A command queue overflow occurred. DB/FNR :1:/:2:.

Text A command queue overflow occurred. DB/FNR .../....
Expl. The database administrator may increase the value for the NC parameter,
and/or the command may be issued when a lower level of command activity
is in effect.
Actn. Contact your database administrator.

NAT3152: Internal user buffer too small. DB/FNR :1:/:2:.

Text Internal user buffer too small. DB/FNR .../....
Expl. The internal user buffer was not large enough to contain the user
buffer areas. The database administrator should increase the value
of the LU parameter.
Actn. Contact your database administrator.

NAT3153: Previous Adabas call still in process. DB/FNR :1:/:2:.

Text Previous Adabas call still in process. DB/FNR .../....
Expl. A "CALL Adabas" was issued by a user while a previous call for
the user was still being processed.
Actn. Contact your database administrator.

NAT3154: Adabas call has been cancelled. DB/FNR :1:/:2:.

Text Adabas call has been cancelled by the user. DB/FNR .../....
Actn. No action required.

NAT3160: Too many ASSO/DATA blocks active in buffer pool. DB/FNR :1:/:2:.

Text Too many ASSO/DATA blocks active in buffer pool. DB/FNR .../....
Expl. Too many Associator and Data Storage blocks were marked as
active in the Adabas buffer pool for a single command.
Actn. Contact your database administrator.

NAT3161: Invalid RABN chain in header list. DB/FNR :1:/:2:.

Text Invalid RABN chain in header list. DB/FNR .../....
Expl. The RABN chain in the header list of the Adabas buffer pool was
invalid.
Actn. Contact your database administrator.

NAT3162: No space for Adabas buffer pool header blocks. DB/FNR :1:/:2:.

Text No space for Adabas buffer pool header blocks. DB/FNR .../....
Expl. No additional space was available for Adabas buffer pool header
blocks.
Actn. Contact your database administrator.

NAT3163: RABN was already in chain. DB/FNR :1:/:2:.

Text RABN was already in chain. DB/FNR .../....
Expl. The RABN to be linked into the RABN header chain was already in
the chain.
Actn. Contact your database administrator.

NAT3164: Too many work areas allocated for command. DB/FNR :1:/:2:.

Text Too many work areas allocated for command. DB/FNR .../....
Actn. Contact your database administrator.

NAT3165: Descriptor invalid or non-existent. DB/FNR :1:/:2:.

Text Descriptor invalid or non-existent. DB/FNR .../....
Expl. A descriptor name was either invalid or did not exist in the
Descriptor Value Table.
Actn. Check program and correct error, or contact your database administrator.

NAT3166: Error detected in inverted list index. DB/FNR :1:/:2:.

Text Error detected in inverted list index. DB/FNR .../....
Expl. An error was detected in an inverted list index; a descriptor
value was not found during a delete operation.
o Locate the descriptor that caused the error in the
additions 2 field of the user control block.
o Run the VERIFY option of ADAINV for this descriptor and save
the output.
o Reinvert the descriptor.
o If necessary, restart the database (if this is possible).
o Send the following information to your nearest support
centre:
- the output of the VERIFY option of ADAINV;
- all available PLOGs;
- the FDT of the file containing the error;
- if the nucleus crashed, the crash directory.
Actn. - if the nucleus crashed, the crash directory. See explanation.

NAT3167: Error detected in inverted list index. DB/FNR :1:/:2:.

Text Error detected in inverted list index. DB/FNR .../....
Expl. An error was detected in an inverted list index; a descriptor
value was already present during an insert operation.
o Locate the descriptor that caused the error in the
additions 2 field of the user control block.
o Run the VERIFY option of ADAINV for this descriptor and save
the output.
o Reinvert the descriptor.
o If necessary, restart the database (if this is possible).
o Send the following information to your nearest support
centre:
- the output of the VERIFY option of ADAINV;
- all available PLOGs;
- the FDT of the file containing the error;
- if the nucleus crashed, the crash directory.
Actn. - if the nucleus crashed, the crash directory. See explanation.

NAT3168: Internal CID for coupling processing not found. DB/FNR :1:/:2:.

Text Internal CID for coupling processing not found. DB/FNR .../....
Expl. An internal "CID" required during coupling processing was not found.
Actn. Contact your database administrator.

NAT3170: Adabas RABN for the command not found. DB/FNR :1:/:2:.

Text Adabas RABN for the command not found. DB/FNR .../....
Expl. The Adabas RABN required for the command could not be found.
Actn. Contact your database administrator.

NAT3171: Constant set used by Adabas not found. DB/FNR :1:/:2:.

Text Constant set used by Adabas not found. DB/FNR .../....
Actn. Contact your database administrator.

NAT3172: ISN less than MINISN or greater than MAXISN. DB/FNR :1:/:2:.

Text ISN less than MINISN or greater than MAXISN. DB/FNR .../....
Expl. An ISN was either less than the MINISN setting or greater than the
MAXISN setting in effect for the file.
Actn. Check program and correct error, or contact your database administrator.

NAT3173: An invalid data storage RABN was detected. DB/FNR :1:/:2:.

Text An invalid data storage RABN was detected. DB/FNR .../....
Actn. Contact your database administrator.

NAT3174: Starting RABN for L2/L5 not in address converter. DB/FNR :1:/:2:.

Text Starting RABN for L2/L5 not in address converter. DB/FNR .../....
Expl. The starting data storage RABN for an L2/L5 command was not
contained in the address converter for the file.
Actn. Check program and correct error, or contact your database administrator.

NAT3176: Error in call to Adabas subroutine/inverted list. DB/FNR :1:/:2:.

Text Error in call to Adabas subroutine/inverted list. DB/FNR .../....
Expl. An incorrect call to an Adabas subroutine or an inconsistency in
an inverted list was detected.
Actn. Check program and correct error, or contact your database administrator.

NAT3177: Record not found in indicated DATA storage block. DB/FNR :1:/:2:.

Text Record not found in indicated DATA Storage block. DB/FNR .../....
Expl. A record could not be found in the Data Storage block which should
have contained it as indicated by the Address Converter.
Actn. Contact your database administrator.

NAT3178: FDT and internal format buffer not consistent. DB/FNR :1:/:2:.

Text FDT and internal format buffer not consistent. DB/FNR .../....
Expl. An inconsistency was detected between the Field Description Table (FDT)
and the internal format buffer;
or an internal occurred when updating a multiple-value field.
Actn. Contact your database administrator.

NAT3181: Start of transaction not found on autobackout. DB/FNR :1:/:2:.

Text Start of transaction not found on autobackout. DB/FNR .../....
Expl. The start of a transaction could not be found when an
"autobackout" was executed.
Actn. Check program and correct error, or contact your database administrator.

NAT3182: Necessary ET data not found in WORK block. DB/FNR :1:/:2:.

Text Necessary ET data not found in WORK block. DB/FNR .../....
Expl. The necessary ET data were not found in the appropriate WORK block.
Actn. Correct error or contact your database administrator.

NAT3183: Internal no. for database I/O operation invalid. DB/FNR :1:/:2:

Text Internal no. for database I/O operation invalid. DB/FNR .../...
Expl. An internally assigned number for a database I/O operation was
found to be invalid.
Actn. Contact your database administrator.

NAT3184: A phonetic field name could not be found. DB/FNR :1:/:2:.

Text A phonetic field name could not be found. DB/FNR .../....
Actn. Check program and correct error, or contact your database administrator.

NAT3185: ADAM field not found in compressed record. DB/FNR :1:/:2:.

Text ADAM field not found in compressed record. DB/FNR .../....
Actn. Contact your database administrator.

NAT3197: Pool for unique descriptor values too small. DB/FNR :1:/:2:.

Text Pool for unique descriptor values too small. DB/FNR .../....
Actn. Contact your database administrator.

NAT3198: Value for unique descriptor already exists. DB/FNR :1:/:2:.

Text Value for unique descriptor already exists. DB/FNR .../....
Expl. An attempt was made to duplicate a value for a unique descriptor.
Actn. Check program and correct error, or contact your database administrator.

NAT3199: Inconsistency in inverted list index. DB/FNR :1:/:2:.

Text Inconsistency in inverted list index. DB/FNR .../....
Expl. During an UPDATE opertion, an inconsistency was detected in an
inverted list index.
Actn. Contact your database administrator.

NAT3200: Security violation or invalid cipher code. DB/FNR :1:/:2:.

Text Security violation or invalid cipher code. DB/FNR .../....
Actn. Check program and correct error, or contact your database administrator.

Top of page