This section covers the following topics:
Command processors are used to control the way in which commands/functions are executed in a library. They are created with the Natural utility SYSNCP . In a command processor, you define commands - that is, keywords and keyword combinations - and the actions to be performed in response to these commands being entered by the users.
Natural Security allows you to define functional security for each command processor in a library: you can determine which of the keywords and keyword combinations defined in the processor are to be allowed or not allowed in the library, thus restricting the availability of certain functions within the library. Moreover, you can define user-specific functional security; that is, you can make different functions available for different users of the same command processor in a library.
This is done via the Functional Security options in the security profiles of libraries and users, as described below. The functional security defined for a command processor in a library profile applies to all users of the command processor in that library. In addition, in a user profile you can define different functional security for an individual user of a command processor in a library, which then takes precedence over the specifications in the library profile.
In Natural Security, a command processor can have the following status:
| Undefined | The command processor has been created with SYSNCP, but no functional security is defined for it. |
|---|---|
| Defined | The command processor has been created with SYSNCP and functional security is defined for it. |
| Modified | The command processor has been modified with SYSNCP after
functional security was defined for it.
In this case, you may have to update the functional security for
the command processor; this is done by marking the field Functional
Security Defined with Note: |
| Unresolved | The command processor has been deleted with SYSNCP, but
functional security is still defined for it.
In this case, you should also delete the functional security for
the command processor (by marking the field Functional Security
Defined with |
By default, all keywords defined in a command processor are disallowed, which means that none of the commands defined in the processor can be executed.
If you wish to make only relatively few functions available, you can leave this default unchanged so that generally all keywords are disallowed, and you can then allow the use of individual keywords and keyword combinations (commands). If you wish to make most functions available and only restrict the use of relatively few functions, you can change the default so that generally all keywords are allowed and you can then disallow the use of individual keywords and keyword combinations.
If you mark the option Functional Security in the Additional Options window of a library security profile (see Components of a Library Profile), the Functional Security window will be displayed:
Library ID ................... XYZLIB__
Command Processor ............ ________
__ Functional security defined ..
__ Keyword default ..............
__ Keyword exceptions ...........
__ Command exceptions ...........
Type of command exceptions ...
|
In this window, you can define functional security for any command processor that has been created in that library.
In the Command Processor field of the window, you enter the name of the processor you wish to define for the library.
If you do not know the name of the processor you want, enter an asterisk (*) in the Command Processor field: a list of all processors that are contained in that library will be displayed; from the list, you select a processor by marking it with any character or the cursor.
By default, no functional security is defined for a command processor: the Keyword Default is set to "Disallowed", and no Keyword Exceptions or Command Exceptions are defined; which means that none of the commands defined in the processor can be executed.
This field may take the following values:
| No | This indicates that the default settings for Keyword Default and Keyword/Command Exceptions apply. |
|---|---|
| Yes | This indicates that some of the default settings have been changed. |
| ??? | This indicates that the status of the command processor is either "modified" or "unresolved" (see Status of a Command Processor above). |
To delete all functional security definitions that have been made for
the command processor, you mark this field with DE.
This field may take the following values:
| Disallowed | By default, all keywords specified in the processor are disallowed (and you may allow individual keywords and keyword combinations via Keyword Exceptions and Command Exceptions). |
|---|---|
| Allowed | By default, all keywords specified in the processor are allowed (and you may disallow individual keywords and keyword combinations via Keyword Exceptions and Command Exceptions). |
To change the value from "Disallowed" to "Allowed", or vice versa, mark the Keyword Default input field with any character.
You can only change the Keyword Default if neither Keyword Exceptions nor Command Exceptions are defined; so, if necessary, you have to reset the allowed/disallowed status of all Command Exceptions and Keyword Exceptions to their default settings (as explained below) before you can change the Keyword Default.
If you mark the Keyword Default field, with
PU, the status of the command processor will be set to "public".
This means that you can define keyword and command exceptions, but they will
not take effect. To activate the command processor for the keyword/command
exceptions to take effect, you mark the Keyword Default
field with RL (release).
This field may take the following values:
| No | This indicates that the Keyword Default applies to all keywords; that is, all keywords are either allowed or disallowed. |
|---|---|
| Yes | If the Keyword Default is set to "Disallowed", this indicates that individual keywords are allowed; if the Keyword Default is set to "Allowed", this indicates that individual keywords are disallowed. |
By default, all keywords are either allowed or disallowed, depending on the setting of the Keyword Default.
To change this default status for individual keywords, mark the
Keyword Exceptions input field with any character(s) -
except DE. Depending on the Keyword Default,
either the Allow Keywords screen or the Disallow
Keywords screen will be displayed, listing all keywords that have
been defined in the processor:
14:18:03 *** NATURAL SECURITY *** 2011-11-30
- Disallow Keywords -
Library .. SYRINX Command Processor .. PROC2112
Keyword Type A/D
________________ ______ _
ACCESS Action A
ADD Action A
ADDMULTIPLE Action A
ADMIN Action A
CONVERT Action A
COPY Action D
DELETE Action D
DISPLAY Action A
DUMMY1 Action A
DUMMY2 Action A
DUMMY3 Action A
DUMMY4 Action A
EDIT Action A
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help PrevM Exit AddOp Flip Canc
|
The list can be scrolled as described in the section Finding Your Way In Natural Security.
In the A/D column, mark the keywords to be disallowed with "D" and those to be allowed with "A".
Any status that is different from the Keyword Default status will be displayed intensified.
To reset the disallowed/allow status of all keywords to the
Keyword Default setting, mark the Keyword
Exceptions input field with DE (delete). A window will
be displayed, in which you enter "Y" to confirm the deletion.
This field may take the following values:
| No | This indicates that all initial default settings apply. |
|---|---|
| Yes | This indicates that individual default settings have been changed. |
If any of the keywords that make up a command is disallowed, the command will, by default, be disallowed. If all of the keywords that make up a command are allowed, the command will, by default, be allowed.
To change this default status for individual commands, mark the
Command Exceptions input field with any character(s) -
except DE. The Allow/Disallow Commands screen
will be displayed, listing all commands that have been defined in the
processor:
14:19:13 *** NATURAL SECURITY *** 2011-11-30
- Allow/Disallow Commands -
Library .. SYRINX Command Processor .. PROC2112
Action Object (unused) A/D
________________ ________________ ________________ _
ACCESS DATASET A
ACCESS JOB A
ACCESS NODE A
ACCESS OPERATIONS A
ACCESS PRINTER A
ACCESS VOLUME_SERIAL A
ACCESS VTAM_APPLICATION A
ADD DATASET A
ADD FILE A
ADD JOB A
ADD LIBRARY A
ADD MAILBOX A
ADD NODE A
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help PrevM Exit AddOp Flip Canc
|
The list can be scrolled as described in the section Finding Your Way In Natural Security.
In the A/D column, mark the commands to be disallowed with "D" and those to be allowed with "A".
Any status that is different from the default status will be displayed intensified.
To reset the status of all commands to their default allowed/disallowed
settings, mark the Command Exceptions input field with
DE (delete). A window will be displayed, in which you enter "Y" to
confirm the deletion.
If any Command Exceptions are defined, this field may take the following values:
| Allowed | This indicates that one or more of the commands that were initially disallowed have been allowed. |
|---|---|
| Disallowed | This indicates that one or more of the commands that were initially allowed have been disallowed. |
| Allowed/ Disallowed | This indicates that one or more of the initially disallowed commands have been allowed and also one or more of the initially allowed commands have been disallowed. |
Generally, the functional security defined for a command processor in a library security profile applies to all users of the processor in that library. If you wish to define different functional security for an individual user, you may do so in the user's security profile. The specifications in the user profile will then take precedence over the specifications in the library profile.
By default, the functional security specifications as defined for the processor in the library security profile apply.
To change any of these specifications for an individual user, mark the option Functional Security in the Additional Options window of the user's security profile (see Components of a User Profile); the Functional Security window will be displayed:
User ID ...................... ABC
Library ID ................... ________
Command Processor ............ ________
__ Functional security defined ..
__ Keyword default ..............
__ Keyword exceptions ...........
__ Command exceptions ...........
Type of command exceptions ...
|
In this window, you can define user-specific functional security for a command processor in a library.
In the Library ID field of the window, enter the ID of the library in which the processor is contained, and in the Command Processor field, enter the name of the command processor you wish to define for the user.
This field may contain the following values:
| No | This indicates that for this user the functional security as defined for the processor in the library security profile applies. |
|---|---|
| Yes | This indicates that for this user functional security different from that defined for the processor in the library security profile has been defined. |
| ??? | This indicates that the status of the command processor is either "modified" or "unresolved" (see Status of a Command Processor above). |
To reset the user-specific specifications to those as defined for the
processor in the library profile, mark the Functional Security
Defined input field with DE (delete). A window will be
displayed, in which you enter "Y" to confirm the deletion.
For these fields, the same applies as described under Defining Functional Security for a Library above.
The command processor NSCCMD01 is provided for the Natural
Security library SYSSEC.
Natural Security always uses this command processor for the handling of functions within SYSSEC. It is not possible to use another command processor with SYSSEC.
By default, NSCCMD01 is defined with Keyword
Default set to "Allowed" and no Keyword
Exceptions or Command Exceptions; that is, all
Natural Security functions are allowed.
You cannot modify command processor NSCCMD01 itself (as it
is only provided in object form). However, if desired, you can control the use
of functions within SYSSEC by modifying the functional security aspects of
NSCCMD01 in the library profile of SYSSEC and in the user profiles
of Natural Security administrators.
For example, if you wish an administrator to only look at security
profiles but not modify them, you would disallow for that administrator all
action keywords but DISPLAY; or, if you wish an administrator to
only deal with security profiles of users, but not security profiles of any
other type of object, you would disallow for that administrator all object
keywords but USER.
The keywords in NSCCDM01 correspond to the Natural Security
commands as listed under Direct
Commands in the section Finding Your Way In
Natural Security.
 |
Warning: Do not set the Keyword Default for command processor NSCCMD01 to "Disallowed" - unless you define
immediately afterwards Keyword Exceptions that
allow you to use all the Natural Security functions you need. If you set the
Keyword Default for NSCCMD01 to "Disallowed"
and then leave the Functional Security window, all Natural
Security functions would be disallowed; that is, no one would be able to use
Natural Security anymore. To make Natural Security accessible again, it would
then be necessary to execute an INPL command with
the RECOVER option. |
For the command processor NSCCMD01, the field
Functional Security
Defined may also take the value "All". This determines
the access to Natural
Security's Administrator Services subsystem.
To switch between the values "Yes" and "All", you mark the field with
OW or AL respectively.