The dialog editor supports the following source formats:
213. This is the format generated by Natural Version 2.1.3 (New Dimension). It is supported for input only. You cannot generate 2.1.3 format with Natural Version 2.2 and with Natural Version 3.
22C. This is the format generated by Natural Version 2.2.2. As from Natural for Windows, Unix Version 4.1 and OpenVMS, this format cannot be generated.
22D. This is the standard "enhanced" source code format. It is generated for compiling, storing, and editing dialogs in Natural Version 2.2.3 and above.
This section describes the syntax conventions for entering code in the source code window provided by the program editor.
Syntax is described using the following meta-notation:
syntax_element_name :=: description
| Syntax Element | Represents |
|---|---|
| syntax_element_name :=: | Identifies the construct whose structure is defined by description. |
| description | Program code displayed in UPPER-CASE letters. |
The Syntax Symbols used in this section are explained in the Statements documentation. In addition, the following symbols are used within the diagrams:
| Symbol | Represents |
|---|---|
| {element1 | element2} | Elements contained within braces and separated by vertical bars indicate that exactly one of the elements must be specified. |
| < > | Pairs of angle brackets indicate that code is separated into multiple lines. Each pair of brackets represents the end of a Natural source line. |
| /*[ and /*] | These bracket pairs form a collapsible block in list mode, even in user code sections. |
Line-number references are explicitly not supported within dialogs, as the dialog editor will generate line numbers for dialog sources without consideration of any line-number references.
Line length and source size are subject to the general limits imposed by Natural.
Note:
Where syntax elements are shown separated by blanks, blanks are
required, but the exact number of blanks is not significant.
This section gives you some background information so you can better understand what the various elements of the dialog source do.
A Natural dialog is an executable module. You invoke it either directly
from the Natural environment or from another executing module with an
OPEN
DIALOG statement. Invoking the dialog causes the
dialog's executable to be instantiated and executed with the system variables
*CONTROL
equal to NULL-HANDLE and *EVENT
equal to OPEN. This OPEN event is processed by
calling the inline subroutine *DLG$SUBR$CREATE$WINDOW which
creates the dialog window. Window creation invokes the dialog with
*CONTROL
equal to NULL-HANDLE and *EVENT
equal to AFTER-OPEN, to which the dialog responds by calling the
inline subroutine *DLG$SUBR$CREATE$CONTROLS. This subroutine
creates any dialog elements defined for the dialog, and then calls
PROCESS GUI ACTION AFTER-CREATION to notify Natural
that window creation is complete.
Depending on further application processing and user input, the dialog
will repeatedly be executed with *CONTROL and
*EVENT set appropriately. The dialog remains
instantiated until it is explicitly unloaded as a result of the window being
destroyed. This is the default reaction to the CLOSE event which
in turn occurs as a result of either end-user interaction or the
CLOSE
DIALOG statement.
The same dialog module may be instantiated more than once, resulting in
more than one dialog and its window and dialog elements being active. Each
dialog has a unique numeric ID which is available as
*DIALOG-ID
during execution of that dialog, and as
window_handle.CLIENT-DATA wherever that dialog's
window handle is accessible (the window must be created with that attribute
setting).
This is the complete source of a dialog.
dialog_source_22D :=:
/** DIALOG SOURCE 22D dialog_info_section_22D [dialog_options_section_22D] dialog_data_section_22D [user_subroutines_section_22D] window_definition_22D control_definitions_22D default_handler_section_22D error_handler_section_22D before_any_section_22D event_handlers_22D after_any_section_22D END /** END-DIALOG-SOURCE
dialog_info_section_22D :=:
The dialog's "info" section, consisting of a banner line, frame gallery information,
and an optional comment.
/*[ DEFINE DIALOG INFO
The following line is always generated by the dialog editor, but ignored on input.
/*D* Natural Dialog Description version_string / date time
One or more following lines are present in dialogs generated using the frame gallery.
If present, they are preserved by (but cannot be changed in) the dialog editor.
[/*DF frame_gallery_info]...
The empty comment line is generated by the dialog editor if no user comment is
present, but ignored on input.
[dialog_comment :=: {/** EMPTY DIALOG COMMENT | [user_code_line_protected_by_/**_prefix]...}]
/*] END-DIALOG-INFO
dialog_options_section_22D :=:
These option settings are only generated by the dialog editor if the "Save settings
with dialog" option is on (see Dialog Editor Options and Setting the Options in the Using Natural Studio documentation). When a dialog is being loaded and this section is present,
the option is turned on.
[/*[ DEFINE OPTION SETTINGS {/** SET option_name option_value}...
/*] END-OPTION-SETTINGS]
dialog_data_section_22D :=:
The dialog's data section, consisting of a global, parameter, and local data area.
The sequence is fixed.
DEFINE DATA gda_section_22D pda_section_22D lda_section_22D END-DEFINE
gda_section_22D :=:
The optional global data area specification. Note that it may reference blocks.
/*[ DEFINE GLOBAL DATA [GLOBAL USING gda_specification] /*] END-GLOBAL-DATA
pda_section_22D :=:
The dialog's parameter data area must always contain the parent handle as the
first field.
/*[ DEFINE DIALOG PARAMETERS PARAMETER 01 #DLG$PARENT HANDLE OF GUI BY VALUE user_data_section_22D /*[ DEFINE USING [PARAMETER USING pda_name]... /*] END-USING /*] END-DIALOG-PARAMETERS
lda_section_22D :=:
The dialog's local data area. The handle declarations for all dialog elements are
necessary if the dialog is to be compiled, but are ignored by the dialog editor
on input and re-generated from the actual dialog element definitions below.
/*[ DEFINE LOCAL DATA LOCAL /*[ DEFINE HANDLES {01 control_name
HANDLE OF control_class[<>]}... /*] END-HANDLES user_data_section_22D
/*[ DEFINE USING [LOCAL USING lda_name]... /*] END-USING /*] END-LOCAL-DATA
user_subroutines_section_22D :=:
The list of user-defined subroutines. The enclosing pseudo-syntax is generated
only if there actually are subroutines.
/*[ DEFINE SUBROUTINES [DEFINE SUBROUTINE subroutine_name user_code_section_22D END-SUBROUTINE]... /*] END-SUBROUTINES
window_definition_22D :=:
The window is defined within a standard subroutine (this must always be present).
DEFINE SUBROUTINE #DLG$ SUBR$CREATE$WINDOW /** DEFINE CONTROL window_name non_array_control_definition_22D END-SUBROUTINE /** END-CONTROL
control_definitions_22D :=:
All dialog elements are defined within one standard subroutine (this must
always be present). The sequence generated by the dialog editor is: menu bar,
tool bar, font controls, timers, any other dialog elements.
DEFINE SUBROUTINE #DLG$SUBR$CREATE$CONTROLS /** DEFINE DIALOG ELEMENTS [control_definition :=:
Each dialog element definition is enclosed in pseudo-comments.
/*[ DEFINE CONTROL control_name[array_bounds]
The following optional comment appears in the source code only.
[control_comment
:=: {user_code_line_protected_by_/**_prefix}...]
The following code creates the dialog element.
{non_array_control_definition_22D
| array_control_definition_22D}
List box controls and selection-box controls may have items lists defined as one
array of dialog elements. These follow the dialog element creation code.
[control_items :=: /* DEFINE ITEMS control_name_array_bounds array_control_definition_22D /*] END-ITEMS ] /*] END-CONTROL
]... END-SUBROUTINE /** END-DIALOG-ELEMENTS
default_handler_section_22D :=:
The DEFAULT event handler, specified as subroutine. For compilation, it must be
present, as this subroutine is called from various places.
DEFINE SUBROUTINE #DLG$HANDLER$DEFAULT /** DEFINE EVENT DEFAULT user_code_section_22D END-SUBROUTINE /** END-EVENT
error_handler_section_22D :=:
The ERROR event handler, specified as ON ERROR section. Optional.
ON ERROR /** DEFINE EVENT ERROR user_code_section_22D END-ERROR /** END-EVENT
before_any_section_22D :=:
The BEFORE-ANY event handler, that is, the code which precedes the DECIDE
statements which evaluate *CONTROL and *EVENT.
/*[ DEFINE EVENT BEFORE-ANY user_code_section_22D /*] END-EVENT
event_handlers_22D :=:
The DECIDE statements which evaluate first *CONTROL, then *EVENT,
activating the appropriate event handlers.
DECIDE
ON FIRST *CONTROL /** DEFINE ALL EVENTS {dialog_events :=: /*[ DEFINE
EVENTS FOR DIALOG VALUE NULL-HANDLE
*CONTROL = NULL-HANDLE indicates an event associated either with the
window or with the dialog itself.
DECIDE ON FIRST *EVENT /*[ DEFINE EVENT OPEN VALUE 'OPEN'
The OPEN event handler starts with any BEFORE-OPEN user code and ends
with the window creation call.
user_code_section_22D PERFORM #DLG$SUBR$CREATE$WINDOW /*] END-EVENT /*[ DEFINE EVENT AFTER-OPEN VALUE 'AFTER-OPEN'
The AFTER-OPEN event occurs while the window creation call is being
processed, that is, it is a nested call of the dialog. It includes the creation of all
dialog elements and the assignment of those window attributes which use
dialog element handles (for example, the handle of the menu bar). User
code may follow.
PERFORM #DLG$SUBR$CREATE$CONTROLS [extra_window_attributes_22D] PROCESS GUI ACTION AFTER-CREATION WITH window_name PROCESS GUI ACTION RESET-ATTRIBUTES
The user's after-open code follows.
user_code_section_22D /*] END-EVENT /*[ DEFINE EVENT CLOSE
The CLOSE event occurs either because the end user directly closes the
window, or because the parent window is closed, or as the result of a CLOSE
DIALOG statement.
VALUE 'CLOSE'
{dialog_close_handler_22D :=: user_code_section_22D}
The following call "destroys" the window and unloads the dialog.
PROCESS GUI ACTION DELETE-WINDOW WITH window_name
The following statement leaves the dialog, bypassing the AFTER-ANY
handler.
ESCAPE ROUTINE IMMEDIATE /*] END-EVENT
The following dialog event handlers are optional and include any user-defined
events.
[event_handler_section_22D...] NONE PERFORM #DLG$HANDLER$DEFAULT END-DECIDE /*] END-EVENTS
}
All event handlers for dialog elements defined in
*DLG$SUBR$CREATE$CONTROLS are listed below.
[control_events_section_22D...] NONE PERFORM #DLG$HANDLER$DEFAULT END-DECIDE /** END-ALL-EVENTS
All events that are not processed and have not been suppressed are handled in the
DEFAULT event handler. Any dialog elements created outside
DLG$SUBR$CREATE$CONTROLS are handled there.
after_any_section_22D :=:
The AFTER-ANY event handler, that is, the code which follows the DECIDE
statements evaluating *CONTROL and *EVENT.
/*[ DEFINE EVENT AFTER-ANY user_code_section_22D /*] END-EVENT
user_data_section_22D :=:
A section with data declarations. The dialog editor generates a comment if no user
code is present. The user code layout is preserved, except that the whole section is
indented appropriately.
[frame_code_section_22D] {/** EMPTY USER CODE SECTION | user_code_line_22D...} [frame_code_section_22D]
user_code_section_22D :=:
A section with executable statements. The dialog editor generates a comment if
no user code is present. The user code layout is preserved, except that the whole
section is indented appropriately.
[frame_code_section_22D] {;/** EMPTY USER CODE SECTION | user_code_line_22D...} [frame_code_section_22D]
frame_code_section_22D :=:
This protected section is code in a frame gallery dialog. Do not change this code.
/*[ DEFINE FRAME CODE [user_code_line_22D...] /*] END-FRAME-CODE
user_code_line_22D :=:
A code line within an event section or subroutine. Indentation is preserved by the
dialog editor. However, a minimum indentation is enforced.
indented_code_line
event_handler_section_22D :=:
A single event handler section, that is, the VALUE clause for the event in a DECIDE
statement for the relevant dialog element.
/*[ DEFINE EVENT event_name VALUE 'event_name' user_code_section_22D /*] END-EVENT
control_events_section_22D :=:
The collection of all event handlers for one dialog element, that is, a VALUE clause
for the dialog element's handle containing a DECIDE statement for *EVENT. If th
dialog element is an array, all elements are handled in this section.
/*[ DEFINE EVENTS FOR control_name VALUE control_name[(*[,*)] DECIDE ON FIRST *EVENT event_handler_section_22D... NONE PERFORM #DLG$HANDLER$DEFAULT END-DECIDE /*] END-EVENTS
non_array_control_definition_22D :=:
A non-array dialog element definition corresponds to the PROCESS GUI statement
action that creates the dialog element. As the WITH PARAMETERS ...
END-PARAMETERS clause is used, all attributes not mentioned have their default
values. The dialog editor does not generate such attributes.
The first and the second attributes must be HANDLE-VARIABLE and TYPE.
The dialog editor uses the predefined attribute value names defined
in the standard local data area NGULKEY1 if this data area has been included in
the dialog. If it is not included, the dialog cannot be compiled. Note that variable
references are allowed for only a subset of the attributes.
PROCESS GUI ACTION ADD WITH
PARAMETERS {attribute_name = {constant | variable_reference}<>}...
END-PARAMETERS [frame_code_line_22D...] /*] END-CONTROL
array_control_definition_22D :=:
An array definition of a dialog element consists of one PROCESS GUI statement for
each array element. Only a subset of dialog elements may be defined as arrays (for
example, not the dialog window or list box controls). Instead of the WITH
PARAMETERS ... END-PARAMETERS clause, explicit attribute assignments and
the simple WITH clause are used, as array elements will share many equal but
non-default attribute values.
The dialog editor is quite restrictive with respect to dialog element arrays:
a maximum of two dimensions is allowed; elements cannot be placed individually;
only a subset of the attributes may vary between elements.
The dialog editor will, when scanning dialog element array definitions, take those
attribute values which may not vary from the first element's definition. Specifically,
all coordinate definitions but the first will be derived from the pseudo-attributes
H-SPACING, V-SPACING, and ARRANGE-IN-COLUMNS. (Note, however,
that not all dialog elements have coordinates.) All attributes not mentioned explicitly
have their default values; this is enforced by the initial PROCESS GUI ACTION
RESET-ALL.
PROCESS GUI ACTION RESET-ATTRIBUTES [spacing_info:=:
/** H-SPACING = horiz_spacing /** V-SPACING = vert_spacing /**
ARRANGE-IN-COLUMNS = {TRUE|FALSE}<>] ] {
Creation of one array element. Numeric references to a message file string must
be handled in an explicit PROCESS GUI statement action for that string, as
direct assignment to a number would simply convert that number to a string.
[attribute_assignment:=:{
control_name_and_index.attribute_name := attribute_value|
PROCESS GUI ACTION GET-MESSAGE-TEXT WITH number indexed_control_name
}<>]... PROCESS GUI ACTION ADD WITH parent_name type_name control_name_and_index
}...
extra_control_attributes_22D :=:
Some attributes cannot be defined meaningfully in the PROCESS GUI ACTION
ADD that creates the dialog element; an example is a non-modifiable selection-box
control's STRING, which must be one of the items' STRING values. This attribute
is therefore defined after all items have been added.
control_name_and_index.attribute_name := attribute_value
extra_window_attributes_22D :=:
Some attributes cannot be defined meaningfully in the PROCESS GUI ACTION
ADD that creates the dialog, for example, the default button can only
be defined after that button has been created.
window_name.attribute_name := attribute_value