Version 6.3.13 for Windows
 —  Tools and Utilities  —

Using SYSMAIN with Subprogram

The MAINUSER subprogram is an Application Programming Interface, which allows you to perform SYSMAIN utility functions from any user-written object (subroutine, program or subprogram) as an alternative to using SYSMAIN utility menus. Upon completion of the SYSMAIN function, the utility is terminated and control is returned to the object from which the request was issued. MAINUSER can be used in either online or batch mode. An example of a callable routine is the MAINCALL program, which is supplied in the SYSMAIN system library.

This section provides instructions for using MAINUSER and the syntax that applies when specifying commands for executing SYSMAIN utility functions.


Invoking and Executing MAINUSER

Start of instruction set To invoke and execute MAINUSER

Top of page

Using Commands

SYSMAIN functions can be executed using commands issued as a parameter of the MAINUSER subprogram.

A command consists of keywords and variable values. For each SYSMAIN function to be performed, the keywords and variable values are shown in the corresponding syntax diagrams below and explained in the section Keywords and Variables in Commands. The symbols in the syntax diagrams correspond to the syntax symbols used for system commands. These symbols are explained in System Command Syntax in the System Commands documentation.

The sequence of the command syntax is not completely fixed. The following rules apply:

Top of page

LIST and FIND Command Syntax

The following command syntax applies to the find and list functions:

LIST
FIND

ALL
CATALOGED
SAVED
STOWED
VIEW

name

IN [LIBRARY] lib-name

[where-clause] [with-clause]

Examples of LIST and FIND

LIST VIEW * IN TESTLIB
L SAVED TEST* IN TESTLIB TYPE PNS FNR 6
L SA TEST* IN TESTLIB FNR 6 DBID 2 TYPE PM FMDATE 2007-01-01
FIND PROG1 IN * DBID 1 FNR 6
F STOWED MAINMENU IN SYS* WHERE DBID 1 FNR 5
FIND ALL PROG2 IN PROD* FNR 27 DBID 1

Top of page

COPY and MOVE Command Syntax

The following command syntax applies to the copy and move functions:

COPY
MOVE

ALL
CATALOGED
SAVED
STOWED
VIEW
RESOURCE

         
name

FM [LIBRARY] lib-name

[where-clause]
    TO [LIBRARY] lib-name [where-clause] [with-clause]

Examples of COPY and MOVE

COPY PROG1 FM TESTORD TO ORDERS DBID 1 FNR 6 REP
C PGM* FM TESTLIB TO PRODLIB WITH REP TYPE PNS
C VIEW PERS FM OLDLIB FNR 10 TO NEWLIB FNR 16 REPLACE
MOVE VIEW PERSONNEL FM OLDLIB FNR 20 TO NEWLIB FNR 24
M PROG1 TO NEWLIB
M STOWED * FM OLDLIB TO NEWLIB WHERE DBID 100 FNR 160 WITH XREF Y

Top of page

DELETE Command Syntax

The following command syntax applies to the delete function:

DELETE

ALL
CATALOGED
SAVED
STOWED
VIEW
RESOURCE

name

IN [LIBRARY] lib-name

[where-clause] [with-clause]

Examples of DELETE

DELETE SA * IN LIBTEST TYPE GLA
D * IN TESTORD TYPE PM
D VIEW FINANCE IN TESTLIB DBID 12 FNR 27

Top of page

RENAME Command Syntax

The following command syntax applies to the rename function:

RENAME

ALL
CATALOGED
SAVED
STOWED
VIEW
RESOURCE

   
name AS new-name [with-clause]
  FM [LIBRARY] lib-name [where-clause]
  TO [LIBRARY] lib-name [where-clause]

Examples of RENAME

RENAME PGM1 AS PROG1
R PGM1 AS PROG1 FM TESTLIB DBID 1 FNR 5 TO PRODLIB DBID 2 FNR 6

Top of page

IMPORT Command Syntax

The following command syntax applies to the import function:

IMPORT

ALL
CATALOGED
SAVED
STOWED
VIEW
RESOURCE

   
   
name FM [PATH] path-name
  TO [LIBRARY] lib-name [where-clause] [with-clause]

Examples of IMPORT

IMPORT ALL PGM* FM D:\NAT-PROGRAMS TO IMP-LIB
I RES res1.bmp FM D:\RESOURCES TO IMP-LIB

Top of page

where-clause

[WHERE] [DBID dbid] [FNR fnr]
  [DIC (dbid,fnr,password,cipher)]
  [SEC (dbid,fnr,password,cipher)]

Separators

Commas must be used as separators between the values following the DIC and SEC keywords, or if a value is missing. For example: DIC (10,,secret,2a). If the ID session parameter (see also ID - Input Delimiter Character in the Parameter Reference documentation) has been set to a comma, use a slash (/) as the separator between values.

Top of page

with-clause

[WITH] [TYPE type] [FMDATE date] [FMTIME time]
  [USER user-id]

XREF

Y
N

  [REPLACE] [RCOP] [NOPROMPT] [HELP]
 

STRUCT
SM
REPORT

           

Top of page

Keywords and Variables in Commands

This section explains the keywords and corresponding variable values (if required) used in a command.

Keywords are listed alphabetically. Letters in italics represent variable values that must be supplied with a keyword. For each variable value, the Natural data format and length is indicated.

Keyword Value

Natural Data
Format/Length

Explanation
ALL name A9 Only applies to programming objects.

The name of the object to be processed or a range of names; see Specifying a Range of Names. Any saved (source) objects and/or cataloged objects are processed.

CATALOGED name A9 Only applies to programming objects.

The name of the cataloged object to be processed or a range of names; see Specifying a Range of Names.

SAVED name A9 Only applies to programming objects.

The name of the saved (source) object to be processed or a range of names; see Specifying a Range of Names.

STOWED name A9 Only applies to programming objects.

The name of an object (or a range of names) for which the saved (source) and the cataloged object are to be processed (see also Specifying a Range of Names). Only an object that exists as both a saved (source) object and a cataloged object is processed.

The exceptions to this are copycode and text, neither of which can be cataloged. However, they are included in processing when this option is specified.

VIEW name A32 Only applies to DDMs (data definition modules).

The name of the DDM to be processed or a range of names; see Specifying a Range of Names.

RESOURCE name A255 Only applies to shared resources.

The name of the shared resource to be processed or a range of names; see Specifying a Range of Names.

FROM
or
FM
or
IN

lib-name
or
path-name

A8
or
A253

Specifies a source library or a source path.

The source library or path contains the object to be processed.

TO lib-name A8 Specifies a target library.
AS new-name

A8
or
A32
or
A255

The new name to be given to an object when it is renamed with the RENAME command. Format/length A8 applies to programming objects, A32 to DDMs and A255 to shared resources.
LIBRARY lib-name A8 An optional keyword that indicates the name (lib-name) of a source or a target library. If you omit the keyword and respective value, the library where you logged on before you invoked SYSMAIN is used for processing.

The source library contains the object to be processed. The target library is the library to which the object is to be copied or moved, or where the object is renamed.

lib-name must be specified immediately after the FROM/FM/IN or TO keyword. If LIBRARY is used, it must be entered between FROM/FM/IN or TO and lib-name.

PATH path-name A253 Only applies to the IMPORT command.

An optional keyword that indicates the name (path-name) of a source path.

path-name must be specified immediately after the FROM/FM/IN or TO keyword. If PATH is used, it must be entered between FROM/FM/IN or TO and path-name.

WHERE where-clause - An optional keyword that indicates the start of a where-clause.

The where-clause must always follow the FROM/FM/IN or TO keyword and the library name (lib-name) or path name (path-name) if relevant; the sequence of the keywords and values within the clause can be specified in any order.

DBID dbid N5 The database ID (DBID) of a source or a target system file.

The source system file contains the object to be processed. The target system file is the system file to which the object is to be copied or moved, or where the object is renamed if relevant.

Valid DBIDs are 1 to 65535.

If no DBID or FNR (file number) is specified, the following applies:
The DBID and FNR of the system file where the current library resides are always used.
For example: if you specify a library contained in the FUSER system file, the DBID and FNR of this file are used.

See also the section File Security in Remote Environments.

FNR fnr N5 The file number (FNR) of a source or a target system file.

The source system file contains the object to be processed. The target system file is the system file to which the object is to be copied or moved, or where the object is renamed if relevant.

Valid FNRs are 1 to 65535.

If no DBID or FNR is specified, the following applies:
The DBID and FNR of the system file where the current library resides are always used.
For example: if you specify a library contained in the FUSER system file, the DBID and FNR of this file are used.

See also the section File Security in Remote Environments.

DIC

dbid
fnr
password
cipher

A80 Specifies the environment of the FDIC source and/or target system file: database ID (dbid), file number (fnr), Adabas password (password) and Adabas cipher code (cipher).

See also the section File Security in Remote Environments.

SEC

dbid
fnr
password
cipher

A80 Specifies the environment of the FSEC source and/or target system file: database ID (dbid), file number (fnr), Adabas password (password) and Adabas cipher code (cipher).

See also the section File Security in Remote Environments.

WITH with-clause - An optional keyword that indicates the start of a with-clause.

The keywords and values of the with-clause can be specified in any order, and the with-clause can be placed in any location within the command string, except in the first three positions.

TYPE type A20 The type(s) of object to be processed as listed in TYPE Specification below.
FMDATE date A10

The start date of a time period:
All objects which were saved or cataloged on or after the specified date are processed.

A date must be specified in a valid Natural date format. The default format is the international format YYYY-MM-DD (YYYY = year, MM = month, DD = day), for example, 2006-05-20.

FMTIME time A5 Only applies if FMDATE is specified.

Specifies a start time:
All objects which were saved or cataloged at or after the specified time (and date) are processed.

A time must be specified in the format HH:II (HH = hours, II = minutes), for example, 11:33.

USER user-id A8

A user ID:
All objects that were saved or cataloged by the specified user are processed.

XREF

N
or
Y

A1 Only applies to programming objects and if Predict is installed.

Indicates whether XRef data stored in Predict system files is to be processed.

You can specify one of the following values:

N XRef data is not processed, except when using the DELETE command. If a cataloged object is deleted, SYSMAIN always deletes any existing XRef data for this object.
Y All XRef data is processed.

See also the section XRef Considerations.

REPLACE - - Activates the replace option used in a with-clause.

An object with the same name in the target environment is replaced by the object to be processed.

Note:
If an object is replaced it is also deleted from the Natural buffer pool; any existing cross-reference records are also deleted.

RCOP - - Specifies that a copy of the object being renamed is to be made.
NOPROMPT - - Not applicable in batch mode.

Disables (NOPROMPT) the SYSMAIN prompts.
With NOPROMPT, no confirmation screen is displayed.
For example, before any deletion, SYSMAIN prompts you for confirmation.

HELP - - This keyword is provided for compatibility reasons only.

STRUCT
or
SM

    Only applies to the IMPORT command.

Indicates structured mode described in Natural Programming Modes in the Programming Guide.

REPORT     Only applies to the IMPORT command.

Indicates reporting mode described in Natural Programming Modes in the Programming Guide.

. - - A period (.) indicates the end of a command. If this character is detected anywhere within a command string, all subsequent data is ignored.

TYPE Specification

The following table lists all valid object-type codes for programming objects that can be used with the TYPE keyword:

Code Object Type
P Program
N Subprogram
S Subroutine
M Map
H Helproutine
3 Dialog
5 Processor
A Parameter data area
G Global data area
L Local data area
C Copycode
T Text
4 Class
7 Function
V View (DDM)
8 Adapter
* All programming object types.

Top of page

Specifying a Range of Names

All SYSMAIN functions provide the option to specify either a name or a range of names for the libraries or the objects to be selected.

The valid asterisk (*) notations for name ranges are listed below where value denotes any combination of one or more characters:

Input Objects or Libraries Selected
* All objects or libraries.
value* All objects or libraries with names that start with value.

Example: AB*
Selected: AB, AB1, ABC, ABEZ
Not selected: AA1, ACB

value*value* All objects or libraries that match value combined with one or two asterisks (*) in any order.

Example: A*C*
Selected: ABCZ, AXXCBBBZ, ANCZ
Not selected: ABDEZ, ACBBBZA

Top of page