Version 6.3.13 for Windows
 —  Installation  —

Installing Natural or Natural Runtime on a PC

This document covers the following topics:


Installation Procedure Overview

A setup program is provided for installing Natural or Natural Runtime. This program decompresses the files contained on the installation medium, copies them to hard disk, and creates a Natural or Natural Runtime program folder. The setup program guides you step by step through the installation procedure with explanatory text available with all screens displayed.

The installation procedure is used for first-time installations of Natural or Natural Runtime as well as for update installations (in which case previous configuration information is used by the setup program).

With Natural Runtime, only a subset of the Natural features is installed. Natural Runtime and Natural are two entirely separate environments. The Natural Runtime installation procedure, however, is almost identical with the Natural installation procedure.

The actual installation process consists of two phases:

  1. Configuration Phase
    You are prompted to enter certain installation values; other values are automatically included by the setup program. The installation parameters are displayed for confirmation prior to the actual installation. During this phase you may cancel the setup procedure at any time or step back to previous dialogs. No changes to your system will occur during this phase.

  2. Installation Phase
    The setup program installs Natural according to the values you entered during the configuration phase. The Natural shortcuts are created on your Windows desktop.

Important:
You must have administrator rights to install Natural or Natural Runtime.

Top of page

Starting the Setup Program

Before you start the setup program, ensure that your system meets the requirements outlined in the section Installation Prerequisites.

Start of instruction set To run the setup program

  1. Close all active Windows applications.

  2. Insert the Natural installation medium into the drive.

    The setup program is automatically started and the initial installation screen appears.

    Note:
    If the autostart feature of your operating system is disabled, execute Setup.exe which can be found in the root directory of the installation medium.

    Initial installation screen

  3. Choose either Natural or Natural Runtime in the initial installation screen.

    The welcome screen for the selected product appears.

  4. Choose the Next button to proceed.

    Now, you will be guided through the installation for the select product. Proceed as described in the sections below.

Notes:

  1. The server installation and the installation of Natural Security are described in separate sections. See Installing Natural on a File Server and Installing Natural Security for further information.
  2. Natural Security cannot be uninstalled without removing the whole Natural environment where Natural Security has been installed.

Top of page

Installation Steps

This section describes how to install Natural and Natural Runtime on a PC.

The following topics are covered below:

License Agreement

After the welcome screen, the license agreement screen is displayed. To proceed with the installation, you have to accept the terms in the license agreement.

Customer Information

In this screen, you enter your customer information.

  1. Enter your user name.

  2. Enter the name of your organization.

  3. Specify the path to the XML file which contains your license key.

    You can overwrite the default with an alternative path to your license key file or change it by choosing the Browse button.

  4. Choose the Next button to proceed.

Migration

This screen appears only if the installation routine detects an older version of Natural or Natural Runtime on your system.

In this screen, you can specify whether you want to migrate your parameter files to the newest version of Natural.

If you migrate your parameter files to the newest version of Natural, the parameter files are transferred and the FNAT and steplib settings are changed where necessary. The FUSER will remain unchanged and cannot be modified during the installation procedure.

  1. Select either No migration or the Natural version that you want to migrate.

  2. Choose the Next button to proceed.

Setup Type

In this screen, you select the setup type that best suits your needs. Different screens appear for Natural and Natural Runtime:

Note:
The setup type Development Client for Single Point of Development (SPoD) is not available in a Natural Runtime installation.

Natural

This screen appears when you install Natural.

Setup type

  1. Select one of the following setup types:

  2. Choose the Next button to proceed.

Natural Runtime

This screen appears when you install Natural Runtime.

Setup type

  1. Select one of the following setup types:

  2. Choose the Next button to proceed.

Choose Destination Location

In this screen, you specify the destination folder to which Natural or Natural Runtime will be installed. This folder must reside on a local disk drive.

The default path is displayed according to your %ProgramFiles% system variable setting:

%ProgramFiles%\Software AG\product-name

where product-name is either "Natural" or "Natural Runtime".

  1. You can change this path by choosing the Browse button.

  2. Choose the Next button to proceed.

When you have selected the setup type Custom, a screen appears in which you have to select the features that are to be installed. Continue reading the section Additional Installation Steps for Custom Setup and then continue with the steps below.

When you have not selected the setup type Custom, continue reading with the steps below.

Ready to Install

In this screen, your current settings and the features to be installed are displayed for reviewing.

InstallShield Wizard Complete

After the files have been copied to your system, the last screen appears. You can display the Readme information now or later.

  1. Complete the installation process by choosing the Finish button.

    The latest information will be displayed, unless you deselect this option.

  2. You can restart your computer now or later. It is recommended to restart it now.

Continue reading the section Starting Natural or Natural Runtime.

Top of page

Additional Installation Steps for Custom Setup

The information in this section applies to the setup type Custom.

After you have defined the destination location, you have to select the features to be installed. Depending on your choice of features, further information may be required. This section describes all screens which may appear with the setup type Custom.

After the last screen described in this section has been displayed, continue reading with the above step Ready to Install.

Select Features

In this screen, the standard features to be installed are preselected. You can add or remove features according to your needs. Different screens appear for Natural and Natural Runtime:

Natural

This screen appears when you install Natural.

Select features

  1. Select the features you want to install.

  2. Choose the Next button to proceed.

Natural Runtime

This screen appears when you install Natural Runtime.

Select features

  1. Select the features you want to install.

  2. Choose the Next button to proceed.

Database Settings

In this screen, the values for the database IDs and file numbers for FUSER and FNAT and the default path for the FUSER directory are displayed. Example for Natural:

Database settings

  1. You can change the FUSER settings by choosing the Browse button.

  2. Choose the Next button to proceed.

Remote Debugger (optional)

This screen appears only if you have selected the feature Remote Debugger (not available with Natural Runtime). The default port for the Remote Debugger is displayed.

graphics/inst-nat-debug.png

  1. You can enter a value for the Remote Debugger communication port (TCP port).

    Values between 0 and 65535 are valid. The default value is 2850.

  2. Choose the Next button to proceed.

Note:
Unlike on Windows without Terminal Services activated, the Natural Remote Debugger Service is not installed as a Windows Service. However, in order to use it for debugging Natural programs remotely, it can be started via the Windows Start menu (Start > Programs > Software AG Natural n.n). After starting the remote debugging service in this fashion, a dialog will appear displaying the port ID that must be used with the RDPORT parameter in the remote Natural session. For further information on how to use the Remote Debugger, refer to the Debugger documentation.

Web I/O Service (optional)

This screen appears only if you have selected the feature Web I/O Interface service. The default port for the Web I/O Interface service is displayed.

graphics/inst-nat-nwo.png

  1. You can enter a value for the Web I/O Interface service port (TCP port).

    Values between 0 and 65535 are valid. The default value is 2900.

  2. Choose the Next button to proceed.

Web Interface (optional)

This screen appears only if you have selected the feature Web Interface. Example for Natural:

Web Interface

In this screen, you can verify the HTTP server root directory and the HTTP server script enabled directory for the Web Interface.

The paths shown in the screen are displayed according to your %ProgramFiles% system variable setting.

  1. If necessary, choose the Browse buttons to change the paths.

  2. Choose the Next button to proceed.

Web Interface - Apache (optional)

This screen appears only if you have selected the feature Web Interface and have selected the HTTP server extensions for Apache. Example for Natural:

Web Interface - Apache

In this screen, you can verify the Apache HTTP server bin directory for the Web Interface.

The path shown in the screen is displayed according to your %ProgramFiles% system variable setting.

  1. If necessary, choose the Browse button to change the path.

  2. Choose the Next button to proceed.

Natural for Tamino

This screen appears only if you have selected the feature Natural for Tamino. Example for Natural:

Natural for Tamino

In this screen, the path and file name of your Natural for Tamino license key file is required.

  1. If necessary, choose the Browse button to change the path.

  2. Choose the Next button to proceed.

Natural Development Server

This screen appears only if you have selected the feature Natural Development Server. Example for Natural:

Natural Development Server

In this screen, the path and file name of your Natural Development Server license key file is required.

  1. If necessary, choose the Browse button to change the path.

  2. Choose the Next button to proceed.

    In the resulting screen, the default port for the Natural Development Server is displayed.

    Natural Development Server

  3. You can enter a value for the Natural Development Server port (TCP port).

    Values between 0 and 65535 are valid. The default value is 2700.

  4. Choose the Next button to proceed.

    When the Natural Development Server is installed, it is automatically added as an allowed program to the Windows firewall.

Continue reading with the step Ready to Install earlier in this section.

Top of page

Starting Natural or Natural Runtime

Once the installation process is completed, you can start a Natural or Natural Runtime session.

For Natural, shortcuts for the following product components have been created on your Windows desktop:

If you would like to read more about using Natural, refer to First Steps with Natural.

For Natural Runtime, shortcuts for the following product components have been created on your Windows desktop:

Before using Natural or Natural Runtime, however, you may need to set up parameters and individual settings depending on your environment. If you wish to do so, see Profile Parameter Usage in the Operations documentation. For information on transferring Natural objects from another platform (for example, UNIX), see Object Handler in the Tools and Utilities documentation.

Note:
When Natural or Natural Runtime has been installed in an environment protected by the Windows firewall and can therefore not be started, see Configuring the Microsoft Windows Personal Firewall to Run Natural in the Operations documentation.

Start of instruction setTo start Natural

Start of instruction setTo start Natural Runtime

Top of page

Maintaining Your Natural or Natural Runtime Environment

You can modify, repair or remove a Natural or Natural Runtime installation at any time after it has been installed.

  1. Choose the Add/Remove Programs feature of your operating system.

  2. In the list of currently installed programs, select Software AG Natural n.n or Software AG Natural Runtime n.n (where n.n is the current version number).

  3. Choose the Change/Remove button.

    The following screen appears (example for Natural).

    Maintenance program

  4. Select the required option button and choose the Next button. See the descriptions below for further information.

Modify

The Select Features screen of the custom installation will be displayed. There you can change your former choice of features. The features that are currently installed are selected. You can add or remove features by selecting or deselecting the corresponding check boxes. If you add new features, the installation will step-by-step prompt you for further input in accordance with your choice, as described above beginning in section Select Features.

If you deselect features, they will be uninstalled.

Repair

The repair feature allows you to repair your installed Natural or Natural Runtime environment, for example if application binaries were deleted by mistake or your system files are incomplete.

Note:
If there are damaged or incorrect entries in the Registry or configuration files, the repair function may not be able to repair this. Then it will be necessary to re-install the environment.

Remove

Using this feature you can uninstall your Natural or Natural Runtime environment.

Top of page

Updating Your Natural or Natural Runtime Environment

If Natural or Natural Runtime is already installed on your PC and you want to install a newer update package or fix for the same version number, proceed as described below.

Notes:

  1. It is only possible to update your environment when the third digit in the version number, which indicates a correction level, changes.
  2. From a parallel installation with an older version number (first 2 digits), it is only possible to migrate the parameter files.

Important:
If you are using the Natural Web I/O Interface, make sure that the required version of Microsoft .NET Framework has already been installed on your PC before you start the update installation. The required version is listed under Software in the section Installation Prerequisites.

Start of instruction setTo update your environment

  1. Start the update installation in the same way as a new installation by executing setup.exe from the installation medium.

  2. Choose the product you want to install.

    The welcome screen is displayed.

  3. Choose the Next button to proceed.

    A message appears asking if you wish to update Natural or Natural Runtime.

  4. If you choose Yes, your version will be replaced by the newer version. The former version will be uninstalled and subsequently the new update package or fix will be installed using the same settings as your former installation.

    The new version will provide the same features as the former version. If you wish to change them, you can use the Modify function described in section Maintaining Your Natural or Natural Runtime Environment after the installation has been executed successfully.

Top of page

Silent Installation

It is possible to record an installation process in order to replay it on other PCs using the same user input as entered during the recorded installation. Since a replayed installation does not require any additional user interaction, no user interface is displayed.

Start of instruction set To record a silent installation

Start of instruction set To start a silent installation

The following information applies for all supported Windows platform except Windows XP and Windows 2003 Server: There is an additional User Account Control (UAC) dialog at the beginning of the installation which, for security reasons, cannot be suppressed by Software AG. One possibility to suppress this dialog is that you create a task with Microsoft's Task Scheduler where the option Run with highest privileges is enabled.

Top of page