
	Version 6.3.13 for UNIX	SEARCH CONTENTS \| PDF BOOKS \| HOME UP PREV NEXT

— Statements —

READ

	`READ`		`ALL`	[`MULTI-FETCH-clause`] [`RECORDS`] [`IN`] [`FILE`] `view-name`
	`BROWSE`		(`operand1`)
		[`PASSWORD=operand2`]
		[`CIPHER=operand3`]
		[`WITH REPOSITION`]
		[`sequence/range-specification`]
		[`STARTING WITH ISN=operand4`]
		[`WHERE` `logical-condition`]
		`statement`
`END-READ`		(structured mode only)
`LOOP`		(reporting mode only)

This document covers the following topics:

Function
Syntax Description
System Variables Available with READ
Examples

For an explanation of the symbols used in the syntax diagram, see Syntax Symbols.

Belongs to Function Group: Database Access and Update

Function

The READ statement is used to read records from a database. The records can be retrieved in physical sequence, in Adabas ISN sequence, or in the value sequence of a descriptor (key) field. The READ statement causes a processing loop to be initiated.

See also the following sections in the Programming Guide:

Syntax Description

Operand Definition Table:

Operand	Possible Structure		Possible Formats					Referencing Permitted	Dynamic Definition
`operand1`	C	S		N	P	I	B *	yes	no
`operand2`	C	S	A					yes	no
`operand3`	C	S		N				yes	no
`operand4`	C	S		N	P	I	B *	yes	no

^* Format B of operand1 and operand4 may be used with a length of less than or equal to 4.

Syntax Element Description:

Syntax Element	Description
`operand1`	Number of Records to be Read: The number of records to be read may be limited by specifying `operand1` (enclosed in parentheses, immediately after the keyword `READ`) - either as a numeric constant (in the range from `0` to `4294967295`) or as the name of a numeric variable. Example: READ (5) IN EMPLOYEES ... MOVE 10 TO CNT(N2) READ (CNT) EMPLOYEES ... For this statement, the specified limit has priority over a limit set with a `LIMIT` statement. If a smaller limit is set with the profile or session parameter `LT`, the `LT` limit applies. Notes: If you wish to read a 4-digit number of records, specify it with a leading zero: (`0nnnn`); because Natural interprets every 4-digit number enclosed in parentheses as a line-number reference to a statement. `operand1` is evaluated when the `READ` loop is entered. If the value of `operand1` is modified within the `READ` loop, this does not affect the number of records read.
`ALL`	ALL Option: To emphasize that all records are to be read, you can optionally specify the keyword `ALL`. The `ALL` option is used by default if `operand1` and `ALL` are omitted.
`MULTI-FETCH-clause`	MULTI-FETCH Clause: See MULTI-FETCH Clause below.
`view-name`	View Name: As `view-name`, you specify the name of a view, which must have been defined either within a `DEFINE DATA` statement or outside the program in a global or local data area. In reporting mode, `view-name` is the name of a DDM if no `DEFINE DATA LOCAL` statement is used.
`PASSWORD=operand2` `CIPHER=operand3`	PASSWORD and CIPHER Clauses: These clauses are applicable only to Adabas databases. They cannot be used with Entire System Server. The `PASSWORD` clause is used to provide a password when retrieving data from a file which is password-protected. The `CIPHER` clause is used to provide a cipher key when retrieving data from a file which is enciphered. See the statements `FIND` and `PASSW` for further information.
`WITH REPOSITION`	WITH REPOSITION Option: This option is used to make the `READ` statement sensitive for repositioning events. See WITH REPOSITION Option.
`sequence/range-specification`	Sequence/Range Specification: This option specifies the sequence and/or the range of retrieval. See Sequence/Range Specification.
`STARTING WITH ISN=operand4`	STARTING WITH ISN Clause: This clause applies only to Adabas databases. Access to Adabas This clause can be used in conjunction with a `READ` statement in physical or in logical (ascending/descending) sequence. The value supplied (`operand4`) represents an Adabas ISN (Internal Sequence Number) and is used to specify a definite record where to start the `READ` loop. Logical Sequence Even if documented with an equal character (=), the `READ` statement does not return only those records with exactly the start value in the corresponding descriptor field, but starts a logical browse in ascending or descending order, beginning with the start value supplied. If some records have the same contents in the descriptor field, they will be returned in an ISN-sorted sequence. The `STARTING WITH ISN` clause is some kind of a "second level" selection criterion that applies only if the start value matches the descriptor value for the first record. All records with a descriptor value that is the same as the start value and an ISN that is "less equal"("greater equal" for a descending `READ`) than the start ISN are ignored by Adabas. The first record returned in the `READ` loop is either the first record with descriptor = start value and an ISN "greater" ("less" for a descending `READ`) than the start ISN, or if such a record does not exist, the first record with a descriptor "greater" ("less" for a descending `READ`) than the start value. Physical Sequence The records are returned in the order in which they are physically stored. If a `STARTING WITH ISN` clause is specified, Adabas ignores all records until the record with the ISN that is the same as the start ISN is reached. The first record returned is the next record following the ISN=start ISN record. Examples This clause may be used for repositioning within a `READ` loop whose processing has been interrupted, to easily determine the next record with which processing is to continue. This is particularly useful if the next record cannot be identified uniquely by any of its descriptor values. It can also be useful in a distributed client/server application where the reading of the records is performed by a server program while further processing of the records is performed by a client program, and the records are not processed all in one go, but in batches. For an example, see the program `REASISND` below.
`WHERE logical-condition`	WHERE Clause: See WHERE Clause below.
`END-READ`	End of READ Statement: In structured mode, the Natural reserved keyword `END-READ` must be used to end the `READ` statement. In reporting mode, the Natural statement `LOOP` is used to end the `READ` statement.
`LOOP`

MULTI-FETCH Clause

Note:
This clause can only be used for Adabas databases.

MULTI-FETCH

ON
OFF
[OF] multi-fetch-factor

Note:
[MULTI-FETCH OF multi-fetch-factor] is not evaluated for database types ADA and ADA2. The default processing mode is applied; see profile parameter MFSET. When used in conjunction with database type ADA2, the Multi-Fetch Clause is ignored completetly; see Database Management System Assignments in the Configuration Utility documentation.

For more information, see the section Multi-Fetch Clause (Adabas) in the Programming Guide.

WITH REPOSITION Option

Note:
This option can only be applied if the underlying database is Adabas.

With a WITH REPOSITION option, you can make a READ statement sensitive for repositioning events. This allows you to reposition to another start value within an active READ loop. Processing of the READ statement then continues with the new start value.

A repositioning event is triggered by one of two ways when you use a READ statement with the WITH REPOSITION option:

When an ESCAPE TOP REPOSITION statement is executed. At execution of an ESCAPE TOP REPOSITION statement, Natural makes an instant branch to the loop begin and performs a restart; that is, the database repositions to a new record in the file according to the current content of the search value variable. At the same time, the loop-counter *COUNTER is reset to zero.
When a READ loop tries to fetch the next record from the database and the value of the system variable *COUNTER is 0.

Note:
If *COUNTER is set to 0 within the active READ loop, processing of the current record is continued; no instant branch to the loop begin is performed.You cannot trigger a reposition event in this fashion on Natural for Windows, UNIX and OpenVMS. This functionality has only been retained for compatibility reasons with Natural Version 3.1 for Mainframes. Therefore, it is not recommended that you use this process.

Functional Considerations

If the READ statement has a loop-limit (e.g. READ (10) EMPLOYEES WITH REPOSITION ..) and a restart event was triggered, the loop gets another 10 new records, no matter how many records where already processed until the repositioning takes place.
If an ESCAPE TOP REPOSITION statement is executed, but the innermost loop is not capable of repositioning (since the WITH REPOSITION keyword is not set in the READ statement or the posted loop statement is anything else but a READ), a corresponding runtime error is issued.
Since the ESCAPE TOP statement does not allow a reference, you can only initiate a reposition event if the innermost processing loop is a READ ..WITH REPOSITION statement.
A reposition event does not trigger the execution of the AT START OF DATA section, nor does it trigger the re-evaluation of the loop-limit operand (if it is a variable).
If the search value was not altered, the loop repositions to the same record like at initial loop start.

Sequence/Range Specification

Three syntax options are available to specify the sequence and/or the range of retrieval.

Syntax Option 1:

[IN] [PHYSICAL]

ASCENDING
DESCENDING
VARIABLE operand5
DYNAMIC operand5

[SEQUENCE]

Syntax Option 2:

=
EQ
EQUAL TO
[STARTING] FROM

BY
WITH

ISN

operand6

THRU
ENDING AT

operand7

Syntax Option 3:

[IN] [LOGICAL]

ASCENDING
DESCENDING
VARIABLE operand5
DYNAMIC operand5

[SEQUENCE]

BY
WITH

descriptor

=
EQ
EQUAL TO
[STARTING] FROM

operand6

THRU
ENDING AT

operand7

=
EQ
EQUAL TO
[STARTING] FROM

operand6 TO operand7

<
LT
LESS THAN
>
GT
GREATER THAN
<=
LE
LESS EQUAL
>=
GE
GREATER EQUAL

operand6

Notes:

The syntax options [2] and [3] are not available with Entire System Server.
If the comparators of Diagram 3 are used, the options ENDING AT, THRU and TO may not be used. These comparators are also valid for the HISTOGRAM statement.

Operand Definition Table:

Operand	Possible Structure		Possible Formats									Referencing Permitted	Dynamic Definition
`operand5`		S	A									yes	no
`operand6`	C	S	A	N	P	I	F	B *	D	T	L	yes	no
`operand7`	C	S	A	N	P	I	F	B *	D	T	L	yes	no

^* Format B of operand6 and operand7 may be used only with a length of less than or equal to 4.

Syntax Element Description:

Syntax Element	Description
`READ IN PHYSICAL SEQUENCE`	Read in Physical Sequence: This option is used to read records in the order in which they are physically stored in a database. `PHYSICAL` is the default sequence.
`READ BY ISN`	Read by ISN: This option is used to read records in the order of Adabas ISNs (internal sequence numbers). (Instead of using the keyword `BY`, you may specify the keyword `WITH`, which would have the same effect). `READ BY ISN` can only be used for Adabas databases. Note: For XML databases: `READ BY ISN` is used to read XML objects according to the order of Tamino object IDs.
`READ IN LOGICAL SEQUENCE`	Read in Logical Sequence: This option is used to read records in the order of the values of a descriptor (key) field. If you specify a descriptor, the records will be read in the value sequence of the descriptor. A descriptor, subdescriptor, superdescriptor or hyperdescriptor may be used for sequence control. A phonetic descriptor, a descriptor within a periodic group, or a superdescriptor which contains a periodic-group field cannot be used. If you do not specify a descriptor, the default descriptor as specified in the DDM (field `Default Sequence`) will be used. If the descriptor used for sequence control is defined with null-value suppression (Adabas only), any record which contains a null value for the descriptor will not be read. If the descriptor is a multiple-value field (Adabas only), the same record will be read multiple times depending on the number of values present. Note: `READ IN LOGICAL SEQUENCE` is also discussed in the Programming Guide; see Statements for Database Access, READ Statement.
`ASCENDING \| DESCENDING \| VARIABLE \| DYNAMIC SEQUENCE`	Ascending/Descending Order: This clause only applies to Adabas, XML databases and SQL databases. In a `READ PHYSICAL` statement, it can only be applied to DB2 databases. With this clause, you can determine whether the records are to be read in ascending sequence or in descending sequence. The default sequence is ascending (which may, but need not, be explicitly specified by using the keyword `ASCENDING`). If the records are to be read in descending sequence, you specify the keyword `DESCENDING`. If, instead of determining it in advance, you want to have the option of determining at runtime whether the records are to be read in ascending or descending sequence, you either specify the keyword `VARIABLE` or `DYNAMIC`, followed by a variable (`operand5`). `operand5` has to be of format/length A1 and can contain the value `A` (for "ascending") or `D` (for "descending"). If keyword `VARIABLE` is used, the reading direction (value of `operand5`) is evaluated at start of the `READ` processing loop and remains the same until the loop is terminated, regardless if the `operand5` field is altered in the `READ` loop or not. If keyword `DYNAMIC` is used, the reading direction (value of `operand5`) is evaluated before every record fetch in the `READ` processing loop and may be changed from record to record. This allows to change the scroll sequence from ascending to descending (and vice versa) at any place in the `READ` loop. Note: For XML databases: `DYNAMIC SEQUENCE` is not available.
`STARTING FROM` `... ENDING AT/TO`	STARTING FROM/ENDING AT Clauses: The `STARTING FROM` and `ENDING AT` clauses are used to limit reading to a set of records based on a user-specified range of values. The `STARTING FROM` clause (`=` or `EQ` or `EQUAL TO` or `[STARTING] FROM`) determines the starting value for the read operation. If a starting value is specified, reading will begin with the value specified. If the starting value does not exist in the file, the next higher (or lower for a `DESCENDING` read) value will be used. If no higher (or lower for `DESCENDING`) value exists, the loop will not be entered. In order to limit the records to an end-value, you may specify an `ENDING AT` clause with the terms `THRU`, `ENDING AT` or `TO`, that imply an inclusive range. Whenever the read descriptor field exceeds the end-value specified, an automatic loop termination is performed. Although the basic functionality of the `TO`, `THRU` and `ENDING AT` keywords looks quite similar, internally they differ in how they work.
`THRU/ENDING AT`	THRU/ENDING AT Option: If `THRU` or `ENDING AT` is used, only the start-value is supplied to the database, but the end-value check is performed by the Natural runtime system, after the record is returned by the database. If the read direction is `ASCENDING`, you have to supply the lower value as the start-value and the higher-value as the end-value, since the start-value represents the value (and record) returned first in the `READ` loop. However, if you invoke a backwards read (`DESCENDING`), the higher value has to appear in the start-value and the lower-value in the end-value. Internally, to determine the end of the range to be read, Natural reads one record beyond the end-value. If you have left the `READ` loop because the end-value has been reached, be aware that this last record is in fact not the last record within the demanded range, but the first record beyond that range (except if the file does not contain a further record after the last result record). The `THRU` and `ENDING AT` clauses can be used for all databases which support the `READ` or `HISTOGRAM` statements.
`TO`	TO Option: If the keyword `TO` is used, both the start-value and the end-value are sent to the database, and Natural does not perform checks for value ranges. If the end-value is exceeded, the database reacts the same as when "end-of-file" is reached, and the database loop is exited. Since the complete range checking is done by the database, the lower-value (of the range) is always supplied in the start-value and the higher-value filled into the end-value, regardless if you are browsing in `ASCENDING` or `DESCENDING` order.

Notes on Functional Differences between THRU/ENDING AT and TO

The following list describes the functional differences between the usage of the THRU/ENDING AT and TO options.

THRU/ENDING AT	TO
When the `READ` loop terminates because the end-value has been reached, the view contains the first record "out-of-range".	When the `READ` loop terminates because the end-value has been reached, the view contains the last record of the specified range.
If a end-value variable is modified during the `READ` loop, the new value will be used for end-value check on next record being read.	The end-value variable will only be evaluated at `READ` loop start. All further modifications during the `READ` loop have no effect.
An incorrect range (for example, `READ .. = 'B' THRU 'A'`) does not cause a database error, but just returns no record.	An incorrect range results in a database error (for example, Adabas RC=61), because a value range must not be supplied in descending order.
If a `READ .. DESCENDING` is used with start- and end-value, the start value is used to position in the file, whereas the end-value is used by Natural to check for "end-of-range". Therefore the start-value is higher than (or equal to) the end-value.	Since both values are passed to the database, they have to appear in ascending order. In other words, the start-value is lower than (or equal to) the end-value, no matter if you are reading in ascending or descending order.
In order to check for range overflow, the descriptor value has to appear in the underlying database view; that is, it must be returned in the record buffer.	The descriptor is not required in the record fields returned.
The end-value check for an Adabas multi-value field (MU-field) or a sub-/super-/hyper-descriptor is not possible and leads to syntax error NAT0160 at program compilation.	You may specify an end-value for MU-fields and sub-/super-/hyper-descriptors.
Can be used for all databases.	Can be used for all databases.

Note:
The result of READ/HISTOGRAM THRU/ENDING AT might differ from the result of READ/HISTOGRAM TO if Natural and the accessed database reside on different platforms with different collating sequences.

WHERE Clause

WHERE logical-condition

The WHERE clause may be used to specify an additional selection criterion (logical-condition) which is evaluated after a value has been read and before any processing is performed on the value (including the AT BREAK evaluation).

The syntax for a logical-condition is described in the section Logical Condition Criteria in the Programming Guide.

If a LIMIT statement or a processing limit is specified in a READ statement containing a WHERE clause, records which are rejected as a result of the WHERE clause are not counted against the limit.

System Variables Available with READ

The Natural system variables *ISN and *COUNTER are available with the READ statement.

The format/length of these system variables is P10. This format/length cannot be changed.

The usage of the system variables is illustrated below.

System Variable	Explanation
`*ISN`	The system variable `*ISN` contains the Adabas ISN of the record currently being processed.
`*COUNTER`	The system variable `*COUNTER` contains the number of times the processing loop has been entered.

Examples

Example 1 - READ Statement
Example 2 - READ WITH REPOSITION
Example 3 - Combining READ and FIND Statements
Example 4 - DESCENDING Option
Example 5 - VARIABLE Option
Example 6 - DYNAMIC Option
Example 7 - STARTING WITH ISN Clause

Example 1 - READ Statement

** Example 'REAEX1S': READ (structured mode)                            
************************************************************************
DEFINE DATA LOCAL                                                       
1 EMPLOY-VIEW VIEW OF EMPLOYEES                                         
  2 PERSONNEL-ID                                                        
  2 NAME                                                                
1 VEHIC-VIEW VIEW OF VEHICLES                                           
  2 PERSONNEL-ID                                                        
  2 MAKE                                                                
END-DEFINE                                                              
*                                                                       
LIMIT 3                                                                 
*                                                                       
WRITE 'READ IN PHYSICAL SEQUENCE'                                       
READ EMPLOY-VIEW IN PHYSICAL SEQUENCE                         
  DISPLAY NOTITLE PERSONNEL-ID NAME *ISN *COUNTER                       
END-READ                                                            
*                                                                       
WRITE / 'READ IN ISN SEQUENCE'                                          
READ EMPLOY-VIEW BY ISN STARTING FROM 1 ENDING AT 3
  DISPLAY         PERSONNEL-ID NAME *ISN *COUNTER  
END-READ                                       
*                                                  
WRITE / 'READ IN NAME SEQUENCE'                    
READ EMPLOY-VIEW BY NAME                     
  DISPLAY         PERSONNEL-ID NAME *ISN *COUNTER  
END-READ                                   
*                                                  
WRITE / 'READ IN NAME SEQUENCE STARTING FROM ''M'''
READ EMPLOY-VIEW BY NAME STARTING FROM 'M'   
  DISPLAY         PERSONNEL-ID NAME *ISN *COUNTER  
END-READ                                      
*                                                  
END

Output of Program REAEX1S:

PERSONNEL         NAME            ISN         CNT     
   ID                                                 
--------- -------------------- ----------- -----------
                                                      
READ IN PHYSICAL SEQUENCE                             
50005800  ADAM                           1           1
50005600  MORENO                         2           2
50005500  BLOND                          3           3
                                                      
READ IN ISN SEQUENCE                                  
50005800  ADAM                           1           1
50005600  MORENO                         2           2
50005500  BLOND                          3           3
                                                      
READ IN NAME SEQUENCE                                 
60008339  ABELLAN                      478           1
30000231  ACHIESON                     878           2
50005800  ADAM                           1           3
                                                      
READ IN NAME SEQUENCE STARTING FROM 'M'               
30008125  MACDONALD                    923           1
20028700  MACKARNESS                   765           2
40000045  MADSEN                       508           3

Equivalent reporting-mode example: REAEX1R.

Example 2 - READ WITH REPOSITION

DEFINE DATA LOCAL
1 MYVIEW VIEW OF ...
  2 NAME
1 #STARTVAL (A20) INIT <'A'>
1 #ATTR     (C)
END-DEFINE
...
SET KEY PF3
...
READ MYVIEW WITH REPOSITION BY NAME = #STARTVAL
INPUT (IP=OFF AD=O) 'NAME:' NAME /
    'Enter new start value for repositioning:' #STARTVAL (AD=MT CV=#ATTR) /
    'Press PF3 to stop'
  IF *PF-KEY = 'PF3'
    THEN STOP
  END-IF
  IF #ATTR MODIFIED
    THEN ESCAPE TOP REPOSITION
  END-IF
END-READ
...

DEFINE DATA LOCAL
1 MYVIEW VIEW OF ...
  2 NAME
1 #STARTVAL (A20) INIT <'A'>
1 #ATTR     (C)
END-DEFINE
...
SET KEY PF3
...
READ MYVIEW WITH REPOSITION BY NAME = #STARTVAL
  INPUT (IP=OFF AD=O) 'NAME:' NAME /
    'Enter new start value for repositioning:' #STARTVAL (AD=MT CV=#ATTR) /
    'Press PF3 to stop'
  IF *PF-KEY = 'PF3'
    THEN STOP
  END-IF
  IF #ATTR MODIFIED
    THEN RESET *COUNTER
  END-IF
END-READ
...

Example 3 - Combining READ and FIND Statements

The following program reads records from the EMPLOYEES file in logical sequential order based on the values of the descriptor NAME. A FIND statement is then issued to the VEHICLES file using the personnel number from the EMPLOYEES file as search criterion. The resulting report shows the name (read from the EMPLOYEES file) of each person read and the model of automobile (read from the VEHICLES file) owned by this person. Multiple lines with the same name are produced if the person owns more than one automobile.

** Example 'REAEX2': READ and FIND combination                          
************************************************************************
DEFINE DATA LOCAL                                                       
1 EMPLOY-VIEW VIEW OF EMPLOYEES                                         
  2 PERSONNEL-ID                                                        
  2 FIRST-NAME                                                          
  2 NAME                                                                
  2 CITY                                                                
1 VEH-VIEW VIEW OF VEHICLES                                             
  2 PERSONNEL-ID                                                        
  2 MAKE                                                                
END-DEFINE                                                              
*                                                                       
LIMIT 10                                                                
*                                                                       
RD. READ EMPLOY-VIEW BY NAME STARTING FROM 'JONES'                    
  SUSPEND IDENTICAL SUPPRESS                                            
  FD. FIND VEH-VIEW WITH PERSONNEL-ID = PERSONNEL-ID (RD.)       
    IF NO RECORDS FOUND                                                 
      ENTER                                   
    END-NOREC                                 
    DISPLAY NOTITLE (ES=OFF IS=ON ZP=ON AL=15)
            PERSONNEL-ID (RD.)                
            FIRST-NAME (RD.)                  
            MAKE (FD.) (IS=OFF)               
  
  END-FIND
END-READ                          
END

Output of Program REAEX2:

PERSONNEL      FIRST-NAME         MAKE      
      ID                                       
--------------- --------------- ---------------
                                               
20007500        VIRGINIA        CHRYSLER       
20008400        MARSHA          CHRYSLER       
                                CHRYSLER       
20021100        ROBERT          GENERAL MOTORS 
20000800        LILLY           FORD           
                                MG             
20001100        EDWARD          GENERAL MOTORS 
20002000        MARTHA          GENERAL MOTORS 
20003400        LAUREL          GENERAL MOTORS 
30034045        KEVIN           DATSUN         
30034233        GREGORY         FORD           
11400319        MANFRED

Example 4 - DESCENDING Option

** Example 'READSCND': READ (with DESCENDING SEQUENCE)                  
************************************************************************
DEFINE DATA LOCAL                                                       
1 EMPL VIEW OF EMPLOYEES                                                
  2 NAME                                                                
  2 FIRST-NAME                                                          
  2 BIRTH                                                               
END-DEFINE                                                              
*                                                                       
READ (10) EMPL IN DESCENDING SEQUENCE BY NAME FROM 'ZZZ'          
  DISPLAY *ISN NAME FIRST-NAME BIRTH (EM=YYYY-MM-DD)                    
END-READ                                                           
END

Example 5 - VARIABLE Option

** Example 'REAVSEQ':  READ  (with VARIABLE SEQUENCE)                   
************************************************************************
DEFINE DATA LOCAL                                                       
1 EMPL VIEW OF EMPLOYEES                                                
  2 NAME                                                                
  2 FIRST-NAME                                                          
  2 BIRTH                                                               
*                                                                       
1 #DIR        (A1)                                                      
1 #STARTVALUE (A20)                                                     
END-DEFINE                                                              
*                                                                       
SET KEY PF7 PF8                                                         
*                                                                       
INPUT 'Select READ direction'                                           
   // 'Press' 08T 'PF7' (I)                  21T 'to read backward'     
    /         08T 'PF8' (I) 'or' 'ENTER' (I) 21T 'to read forward'      
*                                                                       
IF *PF-KEY = 'PF7'                                                      
  MOVE 'D'   TO #DIR                                
  MOVE 'ZZZ' TO #STARTVALUE                         
ELSE                                                
  MOVE 'A' TO #DIR                                  
  MOVE 'A' TO #STARTVALUE                           
END-IF                                              
*                                                   
READ (10) EMPL IN VARIABLE #DIR SEQUENCE
               BY NAME FROM #STARTVALUE
  DISPLAY *ISN NAME FIRST-NAME BIRTH (EM=YYYY-MM-DD)
END-READ                                      
END

Example 6 - DYNAMIC Option

DEFINE DATA LOCAL
1 #DIRECTION (A1) INIT <'A'>   /* 'A' = ASCENDING
1 #EMPVIEW VIEW OF EMPLOYEES
2 NAME
...
END-DEFINE
...
READ #EMPVIEW IN DYNAMIC #DIRECTION SEQUENCE BY NAME = 'SMITH'
   INPUT (AD=O) NAME
       / 'Press PF7 to scroll in DESCENDING sequence'
       / 'Press PF8 to scroll in ASCENDING  sequence'
   ..
   IF *PF-KEY = 'PF7' THEN MOVE 'D' TO #DIRECTION END-IF
   IF *PF-KEY = 'PF8' THEN MOVE 'A' TO #DIRECTION END-IF
END-READ
...

Example 7 - STARTING WITH ISN Clause

** Example 'REASISND': READ  (with STARTING WITH ISN)                   
************************************************************************
DEFINE DATA LOCAL                                                       
1 EMPL VIEW OF EMPLOYEES                                                
  2 NAME                                                                
  2 FIRST-NAME                                                          
  2 BIRTH                                                               
*                                                                       
1 #DIR      (A1)                                                        
1 #STARTVAL (A20)                                                       
1 #STARTISN (N8)                                                        
END-DEFINE                                                              
*                                                                       
SET KEY PF3 PF7 PF8                                                     
*                                                                       
MOVE 'ADKINSON' TO #STARTVAL                                            
*                                                                       
READ (9) EMPL BY NAME = #STARTVAL                                  
  WRITE *ISN NAME FIRST-NAME BIRTH (EM=YYYY-MM-DD) *COUNTER             
  IF *COUNTER = 5 THEN                                      
    MOVE NAME TO #STARTVAL                                  
    MOVE *ISN TO #STARTISN                                  
  END-IF                                                    
END-READ                                                  
*                                                           
#DIR := 'A'                                                 
*                                                           
REPEAT                                                      
 READ EMPL IN VARIABLE #DIR  BY NAME = #STARTVAL           
            STARTING WITH ISN = #STARTISN            
    MOVE NAME TO #STARTVAL                                  
    MOVE *ISN TO #STARTISN                                  
    INPUT NO ERASE  (IP=OFF AD=O)                           
         15/01 *ISN  NAME  FIRST-NAME  BIRTH (EM=YYYY-MM-DD)
           //  'Direction:' #DIR                            
           //  'Press PF3 to stop'                          
           /   '      PF7 to go step back'                  
           /   '      PF8 to go step forward'               
           /   '      ENTER to continue in that direction'
    /*                                                    
    IF *PF-KEY = 'PF7' AND #DIR = 'A'                     
      MOVE 'D' TO #DIR                                    
      ESCAPE BOTTOM                                       
    END-IF                                                
    IF *PF-KEY = 'PF8' AND #DIR = 'D'                     
      MOVE 'A' TO #DIR                                    
      ESCAPE BOTTOM                                       
    END-IF                                                
    IF *PF-KEY = 'PF3'                                    
      STOP                                                
    END-IF                                                
  END-READ                                          
  /*                                                      
  IF *COUNTER(0290) = 0                                   
    STOP                                                  
  END-IF                                                  
END-REPEAT                                                
END

SEARCH CONTENTS | PDF BOOKS | HOME UP PREV NEXT