The SYSRPC utility provides the server execution commands ping and terminate. They are used to control active servers that have been defined in the service directory. The ping command sends an internal message to the server to verify a server connection. Terminate either sends an internal message to the server requesting termination of a single server task, or issues a command to EntireX Broker requesting termination of all server tasks associated with an EntireX Broker service.
The server execution commands reference the service
directory in the library that is defined with the NTRPC/RPC keyword subparameter
RPCSDIR
(see the Parameter
Reference documentation). If RPCSDIR is not
set (this is the default), the library where you are currently logged on is
used. The name of the library is indicated in the upper right corner of the
Server Command Execution screen shown in the following
section.
This section covers the following topics:
To use Server Command Execution
In the Code field of the Client Maintenance menu, enter the following command:
XC
The standard view of the Server Command Execution screen appears similar to the following example:
14:09:38 *** NATURAL Remote Procedure Call *** 2006-01-27
Server Command Execution SYSRPC
Node Server Message
1 ETB045
2 NRPC001 Natural
3 NRPC002
4 *LOCTRAN
5 NRPC001-LOGICAL
6 LOGBROKER=NODE
7 NRPC002
______________________________________________________________________________
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help ERR Exit < -H +H -P +P TOP BOT > Canc
|
The standard view displays the columns Node, Server and Message. The fields under the column Message are truncated and display a maximum of 8 characters.
If you choose PF4 or enter the less than (<) sign in the command line at the bottom of the screen, the extended message view of the Server Command Execution screen is displayed similar to the following example:
14:14:08 *** NATURAL Remote Procedure Call *** 2006-01-27
Server Command Execution SYSRPC
Server Message
1
2 NRPC001 Natural RPC Server 6.3.1.0 on WNT-x86
3 NRPC002
4
5 NRPC001-LOGICAL
6
7 NRPC002
______________________________________________________________________________
Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
Help ERR Exit < -H +H -P +P TOP BOT > Canc
|
The extended view allows you to display a maximum of 50 characters of message text in the Message column. This view does not display the Node column and the fields under the Server column are truncated and display a maximum of 16 characters (the standard view shows 30 characters).
If you choose PF11 or enter the greater than (>) sign in the command line, the standard view of the Server Command Execution screen is displayed as shown in Example of a Standard View.
You can ping a server from the standard or extended message view of the Server Command Execution screen.
The following instructions are an example of how to ping a server from the standard view.
For an alternative method of pinging an RPC server, see Application Programming Interface USR2073N described in the Natural Remote Procedure Call (RPC) documentation.
To ping a server
In the Code field of the Client Maintenance menu, enter the following command:
XC
Choose ENTER.
The standard view of the Server Command Execution screen is displayed.
In the empty column between the sequence number and the Node column, in the line(s) which belong to the server(s) to be pinged, enter the following command:
PI
as shown in the example below:
09:49:41 *** NATURAL Remote Procedure Call *** 2006-01-27
Server Command Execution SYSRPC
Node Server Message
1 ETB045
2 PI NRPC001
3 NRPC002
4 *LOCTRAN
5 PI NRPC001-LOGICAL
6 LOGBROKER=NODE
7 NRPC002
|
Choose ENTER. The server(s) return the message:
Server V.R.S.PL on operating system
where
Server denotes the type of server; V.R.S.PL denotes the 1-digit version V, the 1-digit release R, the 1-digit system maintenance level S and the 1- or 2-digit patch level PL of the server; operating system denotes on which operating system the server runs.
Example message:
Natural RPC Server 6.3.1.0 on WNT-x86
If pinging the server fails and an error occurs instead, you can choose PF2 (ERR) to display RPC-related Natural and EntireX Broker messages as described in Using the RPCERR Program (Monitoring the Status of an RPC Session, Natural Remote Procedure Call (RPC) documentation).
To display more of the message text which appears truncated in the standard view of the Server Command Execution screen (see also Example of a Standard View) proceed as follows:
Choose PF4.
Or:
In the command line, enter the less than (<) sign.
The SYSRPC utility provides two commands to terminate a server:
TE (Terminate Server) and
TS (Terminate EntireX Broker Service).
TE terminates a single server task by sending
an internal message to the server. If a server is associated with multiple
server tasks (including replicas on mainframe platforms), you can either
terminate each server task separately by using TE,
or terminate all server tasks in one go by using the
TS command.
TS terminates all server tasks associated
with an EntireX Broker service by calling EntireX Broker's Command and
Information Services (ETBCIS; for details, see the EntireX documentation). The
term service here summarizes all server tasks that run with the
same server name on the same or on different platforms.
You can terminate server tasks from the standard or extended message view of the Server Command Execution screen.
The following section provides instructions for terminating a single server task or an EntireX Broker service from the standard view.
For alternative methods of terminating servers, see Terminating a Natural RPC Server and the Application Programming Interface USR2073N, and Terminating the EntireX Broker Service and the Application Programming Interface USR2075N described in the Natural Remote Procedure Call (RPC) documentation.
To terminate a single server task
In the Code field of the Client Maintenance menu, enter the following command:
XC
The standard view of the Server Command Execution screen is displayed.
In the empty column between sequence number and Node column, in the line which belong to the server to be terminated, enter the following command:
TE
(This is similar to entering the command
PI as show in the
example of pinging a
server.)
Choose ENTER.
The server returns the message:
Terminating Server V.R.S.PL on operating system
where
Server denotes the type of server; V.R.S.PL denotes the 1-digit version V, the 1-digit release R, the 1-digit system maintenance level S, and the 1- or 2-digit patch level PL of the server; operating system denotes on which operating system the server runs.
Example message:
Terminating Natural RPC Server 6.3.1.0 on WNT-x86
If terminating the server fails and an error occurs instead, you can choose PF2 (ERR) to display RPC-related Natural and EntireX Broker messages as described in Using the RPCERR Program (Monitoring the Status of an RPC Session, Natural Remote Procedure Call (RPC) documentation).
To display more of the message text which appears truncated in the standard view of the Server Command Execution screen:
Choose PF4.
Or:
In the command line, enter the less than (<)
sign.
If the Logon option is
set in the service directory, logon data (user ID, password and library name)
is sent to the server with the TE command, as is
usual for remote CALLNAT execution. The Security Token
Data window pops up and requests input of user ID and password if no
Natural Security is installed on the client side and no logon data is set with
the Application Programming Interface USR1071N for the current Natural session.
See also USR1071N
described in Using Security, Using Natural RPC with
Natural Security, in the Natural Remote Procedure Call
(RPC) documentation.
If LOGONRQ=ON (see also
Using
Security in the Natural Remote Procedure Call
(RPC) documentation) has been set on the server side, logon data
must be sent from the client with the TE
command.
If Natural Security is installed on the server, the logon data transferred must enable a logon to the Natural system library SYSRPC.
To terminate an EntireX Broker service
In the Code field of the Client Maintenance menu, enter the following command:
XC
The standard view of the Server Command Execution screen is displayed.
In the empty column between sequence number and Node column, in the line which belong to the server to be terminated, enter the following command:
TS
(This is similar to entering the command
PI as show in the
example of pinging a
server.)
Choose ENTER.
The SYSRPC - Terminating EntireX Broker Service window appears.
If required for the logon, enter the appropriate user ID and password for EntireX Broker.
If you want to terminate server tasks that are involved in a
conversation, in the Terminate immediately field, enter a
Y to request immediate termination. If you enter an N
(this is the default setting), all server tasks involved in a conversation
remain operational.
If you do not want this window to appear repeatedly during the current SYSRPC session, choose Do not show this window again.
Choose ENTER to terminate the EntireX Broker service.
