Version 4.2.6 for Mainframes
 —  Utilities  —

General Information on the Object Handler

The Object Handler consists of the utility SYSOBJH which is located in the Natural system library SYSOBJH, and the direct command interface. Additionally, the Application Programming Interface OBJHAPI is provided for executing Object Handler functions from a Natural program.

This section covers the following topics:


Principles of Object Transfer

The diagram below illustrates how the Object Handler transfers objects by unloading them from the source environment into work files and loading them from work files into the target environment. If required, an application protocol such as FTP can be used for transferring work files from source to target environments.

This section covers the following topics:

Transfer Environment and File Security

An old or a new environment is an FNAT, FUSER or FDIC system file contained in an Adabas database or a VSAM file system on a mainframe, or in the file system on a UNIX, an OpenVMS or a Windows platform. Natural objects on the FNAT or FUSER system file can be contained in libraries as indicated in the following section.

The file security (that is, passwords and cipher codes) relates to the security that has been defined for a system file in an Adabas or a VSAM environment. If file security has been defined for a system file, you need to specify a password, cipher code and/or VSAM name for the source and/or target system file required before you perform an Object Handler function. Otherwise, Adabas or VSAM will issue an appropriate error message. You do not have to provide security information for the default system files assigned to the Natural session at the start of the Object Handler.

Objects Processed by the Object Handler

The Object Handler transfers Natural source objects (also referred to as saved objects) and cataloged objects which are contained in Natural libraries, Natural error messages, Natural command processor sources, Natural DDMs (data definition modules), Natural-related objects, and Adabas FDTs (Field Definition Tables).

Formatting Options

You can transfer data of binary or text format, depending on the source and target environment where the objects are processed.

Binary format can be used for source objects and cataloged objects (including DDMs), error messages, Natural command processor sources, Natural-related objects and Adabas FDTs.

Text format applies to source objects, Natural command processor sources, error messages, DDMs and Adabas FDTs. You can only transfer text data between mainframe and UNIX/OpenVMS/Windows platforms. You can transfer binary data between identical platforms.

Top of page

Invoking the Object Handler

This section provides instructions for invoking the Object Handler by using either menu functions or direct commands:

Start of instruction set To invoke the Object Handler online from any Natural library

  1. Enter the following system command:

    SYSOBJH

    The Main Menu of the Object Handler appears with the following options:

    See the section Functions for descriptions of these functions, and how to process the functions in advanced-user mode or by using wizards.

  2. Select a function by choosing one of the following methods:

    Enter any character in the input field next to the item that corresponds to the function required.

    Or:
    Choose the PF key that corresponds to the function required.

    Or:
    In the Command line, enter the Object Handler command that corresponds to the function required. For information on the commands provided, see the section Direct Commands.

Start of instruction set To invoke the Object Handler in batch or direct command online mode

Top of page

Batch or Direct Command Calls

Several commands can be issued to the Object Handler online or in batch mode. The last command in the command sequence must be a period (.), STOP, END, QUIT or FIN, where FIN ends the Natural session.

The section covers the following topics:

Batch Mode

The commands to the Object Handler are read from standard input. Each command can be separated into a maximum of 20 command parts/strings by entering input delimiters (session parameter ID) after any keyword or keyword value. Each command part/string must not exceed 248 bytes.

If the command is longer than a single line, at the end of every line except the last that belongs to the command, enter the character defined with the session parameter CF (default is %) This indicates continuation on the next line. However, this is only possible if you specify the command SYSOBJH in a line by itself. That is, you cannot use CF, if you enter SYSOBJH in the same line where a multi-line command starts. In addition, we recommend that you set the LS profile parameter to 250.

Example (assuming ID is set to ,):

SYSOBJH 
UNLOAD PROG* LIBRARY MYLIB1, OBJTYPE N,%
WITH NEWLIBRARY MYLIB2%
WHERE REPORT TRANSFER
STOP

Related Topics:

Online Mode

The command to the Object Handler in the Command line can consist of up to 20 command parts.

Example:

SYSOBJH UNLOAD * LIB EXAMPLE WHERE TRANSFER

Top of page

Issuing Object Handler Commands from a Natural Program

You can issue commands to the Object Handler with a Natural program by using the OBJHAPI Application Programming Interface, which is supplied as a subprogram in the Natural system library SYSOBJH. For the parameters required and examples, see the Natural program DOC-API supplied in the library SYSOBJH.

Top of page

Text Members for Reports, Restarts and Traces

Report, restart and trace data created by the Object Handler are stored as Natural text members (Natural objects of the type Text) in the Workplan library. The Object Handler generates names for text members that have not been explicitly specified in the Options window. The names generated are a combination of the weekday and the time. For example: a member with the name 21415568 was created on Tuesday (the second day of the week) at 14:15:56,8.

You can specify the Workplan library in which the text members are stored by using the Workplan-Library profile option of the Object Handler described in Profile Settings. If your Natural session uses a read-only FNAT or FUSER system file as specified with the ROSY=ON profile parameter (see the Parameter Reference documentation), the text members are stored in a scratch-pad file (see the Operations documentation) under one of the following conditions:

Top of page

Natural Security

The use of the Object Handler under Natural Security requires that utility profiles be defined for it in Natural Security. At least, a default profile must be defined. For information on utility profiles, see the section Protecting Utilities in the Natural Security documentation.

If Natural Security is installed, the Object Handler checks the SYSOBJH utility profiles in Natural Security to find out whether the requested function is allowed.

Should a Natural Security error occur during the load function, the following applies:

Top of page

Standard PF Keys

The following PF keys are available on all full-screen maps:

PF Key Explanation
PF1 Invokes the help function for the field at which the cursor is positioned.
PF3 Exits the current screen and returns to the previous screen.
PF6 Goes to the top of a list.
PF7 Scrolls up one page in a list.

On wizard screens: goes back one screen/step.

PF8 Scrolls down one page in a list.

On wizard screens: goes to the next screen/step.

PF9 Goes to the bottom of a list.
PF10 Invokes the Commands menu to select commands for navigation purpose and to assign special settings. See also Commands for Navigation and Special Functions in Direct Commands.
PF12 Cancels the current function.
PF20 Lists all active programs of the Object Handler. This can be helpful information for reporting technical problems to Software AG.

Top of page