This section describes the security aspects of the SYSMAIN utility and the user exit routines supplied for SYSMAIN.
The file security (that is, passwords and cipher codes) relates to the security that has been defined for a system file in an Adabas or a VSAM environment. If file security has been defined for a system file, you need to specify a password, cipher code and/or VSAM name for the source and/or target system file required before you perform a SYSMAIN function. Otherwise, Adabas or VSAM will issue an appropriate error message. You do not have to provide security information for the default system files assigned to the Natural session at the start of the SYSMAIN utility.
To specify passwords and cipher codes
From any SYSMAIN utility menu, invoke a security window for the required system file by using either a PF key or a special command as indicated in the table below:
| System File | Command | PF Key | Objects/Data Affected |
|---|---|---|---|
| FUSER, FNAT | SET FNAT
|
PF12 |
- programming objects |
| FDIC | SET FDIC
|
PF11 |
- rules |
| FSEC | SET FSEC
|
PF10 | - Natural Security profile |
The security window that appears for the specified system file looks similar to the example of the FUSER and FNAT system files below:
+---------------------------------------------------+ ! --- Security for the Natural System Files --- ! ! ! ! Specify the password(s), cipher(s) and VSAM FCT ! ! name(s) for the source/target file(s) below: ! ! ! ! - Source - - Target - ! ! Library .... OLDLIB Library .... NEWLIB ! ! Database ... 10 Database ... 10 ! ! File ....... 32 File ....... 32 ! ! ! ! Password ... Password ... ! ! Cipher ..... Cipher ..... ! ! VSAM Name .. ________ VSAM Name .. ________ ! +---------------------------------------------------+ |
In the window, enter the appropriate password(s), cipher code(s) and/or VSAM name for the required source and/or target system file.
Note:
The Library field is applicable only when
processing programming objects, debug environments or error messages.
Once file security is defined, the SYSMAIN utility uses this security information for all subsequent processing. If you then require that the default security information (obtained at the initialization of the session) be used, you must re-invoke the corresponding security window and clear the password, cipher code and/or VSAM name fields. The passwords and cipher codes are non-display, so even though the fields appear to be empty, they should be cleared again.
Two aspects must be considered when using the SYSMAIN utility within a Natural Security environment:
The source and target libraries can be within one Natural Security environment or within two different Natural Security environments. These environments must be defined to the SYSMAIN utility.
The definition of the Natural Security environment(s) to be used is
specified with the special command SET FSEC.
By default, the current FSEC settings assigned at the start of the
Natural session are used. If you change these settings (in the window
Security for Natural Security (FSEC) Files), they remain
in effect until they are changed by the next SET
FSEC process. In batch mode or direct command mode, the
SEC keyword should be used to specify the file security and
assignments of the request.
Once the source and target environments have been determined, SYSMAIN verifies both the source and target libraries with Natural Security. (The source and/or target database and file must correspond to the database ID (DBID) and file number (FNR) specified in the library security profile; if these values are not specified, default values are taken from the security profile.)
The use of the SYSMAIN utility itself can be restricted, or the use of the source and target libraries to be handled with the SYSMAIN utility can be restricted. The use of SYSMAIN functions when invoked via the application programming interface MAINUSER can be controlled separately. See Protecting Utilities in the Natural Security documentation for details.
The user exit routines of the SYSMAIN utility are used to provide
information on each object being processed or control function processing. A
user exit routine is a Natural subprogram, which is invoked with a
CALLNAT statement.
The source codes of the subprograms and the data areas they use are stored as source objects under the names SM-UX-nn (nn = 01 to 11) in the library SYSMAIN. To make a user exit routine available, you have to catalog the corresponding source object under the name MAINEXnn, either in the library SYSMAIN or in one of its steplibs.
Note:
The names of source objects and cataloged objects of user exit
routines are different to ensure that the overwriting of the source objects by
an update installation does not affect the cataloged objects.
You can change or expand any of the user exit routines as necessary.
Use of these exits results in additional overhead to the SYSMAIN utility, depending on the code logic. It is necessary, however, always to return control to SYSMAIN when exit processing is completed.
As the SYSMAIN utility uses ET logic with Adabas files, the use of user
exit routines can lengthen the transaction time limit (Adabas parameter TT).
Furthermore, the definition of the Adabas transaction should not be altered,
which means that you should not issue any ET/BT commands or END/BACKOUT
TRANSACTION statements. SYSMAIN is responsible for the issuing of all
END TRANSACTION statements. The exception to this rule is in a
situation where a user terminates the normal completion of any SYSMAIN function
with the user exit routines. If this is the case, you must issue a
BACKOUT TRANSACTION before terminating.
If the return code is set to a non-zero value, this overrides any error given by SYSMAIN. When an error is received from an exit, it is placed in the message field and displayed or printed as appropriate. The exception is automated processing, because processing is completed with minimum terminal I/O.
The individual user exit routines are described in the following section:
MAINEX02 - Second User Exit Routine for Object Interrogation
MAINEX04 - User Exit Routine for Modification of File Assignments
MAINEX05 - User Exit Routine for Verification of Direct Commands
MAINEX08 - User Exit Routine for Nothing Found in Batch Mode
MAINEX09 - User Exit Routine for Abnormal Termination in Batch Mode
MAINEX10 - User Exit Routine for Command Errors in Batch Mode
MAINEX11 - User Exit Routine for Setting Special Flags to SYSMAIN
| Function | Interrogate the current value settings of the data elements associated with an object before the object is processed by SYSMAIN. | ||||||
| Remarks | Any object passed to MAINEX01 can be rejected by setting the
RESP-CODE parameter to a non-zero value.
If any additional logic is to be performed, the transaction may
not be at end-of-transaction status and so no Control must be returned to SYSMAIN. |
||||||
| Parameters |
Note: |
||||||
| Local Data Area | SM-UX-L |
| Function | Interrogate the current value settings of the data elements associated with an object after the object has been processed by SYSMAIN. | ||||||
| Remarks | Any object passed to MAINEX02 can be rejected by setting the
RESP-CODE parameter to a non-zero value.
If any additional logic is to be done, the transaction may
not be at end-of-transaction status and so no Control must be returned to SYSMAIN. |
||||||
| Parameters |
Note: |
||||||
| Local Data Area | SM-UX-L |
| Function | Interrogate any request made to SYSMAIN in terms of a direct command or information entered online in menu mode. MAINEX03 obtains control before SYSMAIN processes the command. | ||||
| Remarks | Any command passed to MAINEX03 can be rejected by setting the
RESP-CODE parameter to a non-zero value.
Additional logic can be added, but it is your responsibility to
issue any necessary Control must be returned to SYSMAIN. |
||||
| Parameters |
Note: |
| Function | Override the database, file, password and cipher codes for the Natural system file(s). | ||||
| Remarks | MAINEX04 is invoked before any request is processed
or validated by SYSMAIN. When control is passed to MAINEX04, you are at
end-of-transaction status; therefore you have to set the
RESP-CODE parameter to a non-zero value if you wish to
reject the request.
Control must be returned to SYSMAIN. |
||||
| Parameters |
|
||||
| Local Data Area | SM-UX-L4 |
| Function | Verify any direct command entered during online processing of SYSMAIN. In addition, the special characters used to indicate a system command can be overwritten. | ||||||
| Remarks | MAINEX05 is invoked before any direct command issued
within SYSMAIN is processed. For example, MAINEX05 enables you to interrogate
any of the SET
commands (see Special Commands Issued to SYSMAIN)
and also prevent them from being issued. You can verify these commands and
reject them by returning a non-zero value in the
RESP-CODE parameter. You are at end-of-transaction
status when control is passed to MAINEX05.
A system command entered within SYSMAIN has to be preceded by two
slashes (//); see also
Using the
SYSMAIN Command Line. With MAINEX05, you can define two
other special characters for this purpose; to do so, you assign the desired
characters to the |
||||||
| Parameters |
|
| Function | Obtain control at initialization of a SYSMAIN session. |
| Remarks | MAINEX06 is invoked at the start of the SYSMAIN session, where
you can override some of the SYSMAIN default settings, as for example, prompts
for confirmation of a request like deleting, moving or replacing an object.
All parameters are verified. If they are invalid, the default settings are used. Control must be returned to SYSMAIN. |
|
Parameter |
SM-UX-L6 |
| Function | Obtain control at termination of a SYSMAIN session. | ||
| Remarks | MAINEX07 is invoked at termination of a SYSMAIN session to decide whether control is to be kept by SYSMAIN or not. | ||
| Parameters |
|
| Function | Determine further processing if no objects are found for a command in batch mode. | ||
| Remarks | MAINEX08 is invoked if no objects are found that meet the specified criteria for a specific command executed in batch mode. If this is the case, control may, but need not, be returned to SYSMAIN. If control is returned to SYSMAIN, SYSMAIN will continue processing with the next command. | ||
| Parameters |
|
| Function | Determine action to be taken in case of error in batch mode. | ||||
| Remarks | MAINEX09 is invoked if SYSMAIN processing in batch mode leads
to an error. If this is the case, control may, but need not, be returned to
SYSMAIN. If control is returned to SYSMAIN, SYSMAIN will be terminated with
condition code 45.
Note: |
||||
| Parameters |
|
| Function | Determine action to be taken in case of command error in batch mode. | ||||
| Remarks | MAINEX10 is invoked if an error is detected in a SYSMAIN command in batch mode. If this is the case, control may, but need not, be returned to SYSMAIN. If control is returned to SYSMAIN, SYSMAIN will continue processing with the next command. | ||||
| Parameters |
|
| Function | Special settings user exit routine. | ||
| Remarks | MAINEX11 is invoked at the start of the SYSMAIN session, where
you can set some special SYSMAIN flags, as for example, display of MAINUSER
messages in batch.
See the source object of the user exit routine (SM-UX-11) for the available flags. Control must be returned to SYSMAIN. |
||
| Parameters |
|
