Version 4.2.6 for Mainframes
 —  Using Natural  —

Rules and Naming Conventions

This section describes Natural-specific rules and naming conventions.


Standard Character Settings

The tables in this section list the standard character settings that apply to Natural. These settings comply with the IBM code page 1140 (US English), which determines the assignment of code points to graphic characters. Code points are represented by hexadecimal values. For further details on IBM code pages, refer to the corresponding IBM documentation.

The display control unit or emulator determines what character to display for a hexadecimal value. The use of a code page other than 1140 can result in the following:

Examples:

The character @ (commercial at) used with the German code page 1141 does not provide the hexadecimal value 7C.

The character £ (pound sign) used with the UK English code page 1146 provides the same hexadecimal value as the $ (dollar sign) character used with the US English code page 1140.

The character § (section sign) used with the German code page 1141 provides the same hexadecimal value as the character @ used with the US English code page 1140.

Top of page

Object Naming Conventions

This section describes the naming conventions that apply when saving and/or cataloging a Natural object in a Natural system file.

The name of a Natural object can be 1 to 8 characters (listed in the following table) where the first character must be one of the following:

If the first character is a number sign (#) or a plus sign (+), the name must consist of at least one additional character.

Exception:

The name of a Natural DDM can be 1 to 32 characters (listed in the following table) where the first character must be an upper-case alphabetical character.

The name of a Natural object can consist of the following characters:

Character EBCDIC Hex Value ISO Character Name Remark
A - Z

C1-C9
D1-D9
E2-E9

Latin capital letter A - Z Upper-case alphabetical character
0 - 9 F0-F9 Digit zero - digit nine Numeric character
- 60 Hyphen-minus Hyphen
_ 6D Low line Underscore
/ 61 Solidus Slash
@ 7C Commercial at  
$ 5B Dollar sign  
& 50 Ampersand Only allowed in language codes

See also Defining the Language of a Natural Object in the Programming Guide.

# 7B Number sign Hash sign
+ 4E Plus sign Only allowed as the first character

Top of page

Library Naming Conventions

This section describes the naming conventions that apply to a Natural library.

The name (ID) of a library can be 1 to 8 characters and must not start with "SYS". The prefix "SYS" is reserved for Natural system libraries.

A library name must start with an upper-case alphabetical character. Any other alphabetical character must also be upper case. A library name must not contain any blank characters.

A library name can consist of the following characters:

Character EBCDIC Hex Value ISO Character Name Remark
A - Z

C1-C9
D1-D9
E2-E9

Latin capital letter A - Z Upper-case alphabetical character
0 - 9 F0-F9 Digit zero - digit nine Numeric character
- 60 Hyphen-minus Hyphen
_ 6D Low line Underscore

Not allowed as the last character

Top of page

Naming Conventions for User-Defined Variables

This section describes the naming conventions that apply to a user-defined variable:

For further information on user-defined variables, refer to the section User-Defined Variables in the Programming Guide.

Length of Variable Names

The name of a user-defined variable can be 1 to 32 characters long.

You can use variable names of over 32 characters (for example, in complex applications where longer meaningful variable names enhance the readability of programs); however, only the first 32 characters are significant and must therefore be unique, the remaining characters will be ignored by Natural.

Limitations of Variable Names

The name of a user-defined variable must not be a Natural reserved keyword.

Within one Natural program, you must not use the same name for a user-defined variable and a database field, because this might lead to referencing errors (see Qualifying Data Structures in the Programming Guide).

Characters Allowed in Variable Names

The name of a user-defined variable can consist of the following characters:

Character EBCDIC Hex Value ISO Character Name Remark
A - Z

C1-C9
D1-D9
E2-E9
81-89
91-99
A2-A9

Latin capital and/or small letter A - Z

Upper-case and/or lower-case alphabetical character

Lower-case not allowed as the first character

0 - 9 F0-F9 Digit zero - digit nine Numeric character
- 60 Hyphen-minus Hyphen
_ 6D Low line Underscore
/ 61 Solidus Slash
@ 7C Commercial at  
$ 5B Dollar sign  
& 50 Ampersand  
# 7B Number sign Hash sign
+ 4E Plus sign Only allowed as the first character

First Character of Variable Names

The first character of the name must be one of the following:

Character EBCDIC Hex Value ISO Character Name Remark
A - Z

C1-C9
D1-D9
E2-E9

Latin capital letter A - Z Upper-case alphabetical character
& 50 Ampersand  
# 7B Number sign Hash sign
+ 4E Plus sign  

If the first character is a number sign (#), a plus sign (+) or an ampersand (&), the name must consist of at least one additional character.

Variables in a global data area (GDA) with a plus sign (+) as the first character must be defined at Level 1; see also Global Data Area in the Programming Guide. Other levels are only used in a redefinition.

A plus sign (+) as the first character of a name is only allowed for application-independent variables (AIVs) and variables in a global data area (GDA).

Names of AIVs must begin with a plus sign (+); see also Defining Application-Independent Variables in the description of the DEFINE DATA statement in the Statements documentation.

An ampersand (&) as the first character of a name is used in conjunction with dynamic source program modification (see the RUN statement in the Statements documentation), and as a dynamically replaceable character when defining processing rules; see the relevant description in the Map Editor documentation.

Case of Characters in Variable Names

Lower-case characters can only be entered as the second and subsequent characters of a variable name.

Lower-case characters entered as part of a variable name are internally converted to upper case if the LOWSRCE option of the COMPOPT system command (see also the System Commands documentation) is set to ON.

Lower-case characters are not translated to upper case and are therefore interpreted as being different from the respective upper-case characters, if

For example, this will cause the names #FIELD and #field to be interpreted as two different field names.

Note:
For compatibility reasons, you should not use this feature if you plan to port Natural applications developed on mainframe computers to Windows, UNIX or OpenVMS. If you use lower-case characters as part of the variable name, it is highly recommended that variable names are unique regardless of their case.

Top of page