Version 4.2.6 for Mainframes
 —  Natural Review  —

Administrative Functions

Natural Monitor administrative functions are discussed in two sections:

This section covers the following topics:


User Profile System

Note:
See Installing Natural Review, Storage Requirements, for an explanation of the effect of many users on CICS SHARED storage requirements.

The User Profile system provides a series of menus to help you generate profiles that define access rules for Natural Monitor users. You may create profiles for new users, change access rules for existing users, and purge user profiles that are no longer required.

Natural Monitor provides a default profile to allow access for users who do not have a profile defined for them. When a user logs on, Natural Monitor checks the Natural library SYSRNM for the user's profile. If one is not found, the default profile is used.

The default profile is also used as a basis for creating user profiles. When a profile for a new user is generated, the default profile is copied. The new profile may then be customized to suit the needs of the user.

Note:
The default profile provides unrestricted access to Natural Monitor systems and functions. It is recommended that you first create a user profile for the system administrator and other privileged users; then modify the default profile so that it conforms to the needs of the majority of users.

Accessing the User Profile System

Start of instruction setTo access the User Profile System

The User Profile System menu appears as shown below:

16:59:08                  *****   R E V I E W   *****                2006-03-02
                                User Profile System
  
  
                    Code              Description
  
                     EU          Edit User Profile
                     LU          List User Profiles
  
  
  
  
  
  
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help        Exit                                                  Menu

The following commands enable you to create and edit profiles, and display lists of existing profiles:

Command Description
EU Edits a profile for a new or existing user.
LU Displays a list of existing user profiles, including the default profile.

From the list of existing user profiles, you can select a particular profile to be edited or purged.

Customizing the Default Profile

You do not need to create a user profile for each user of Natural Review. By customizing the default profile so that the access rules meet the needs of the majority of Natural Monitor users, you eliminate the need for individual user profiles.

You can access the Edit User function to edit the default profile in two ways.

Start of instruction setTo access the Edit User screen

  1. From any screen within Natural Review, type UP EU DEFAULT on the command line and press Enter.

  2. From any screen within the User Profile system, type EU DEFAULT on the command line and press Enter.

The following Edit User screen is displayed:

16:59:54                  *****   R E V I E W   *****                2006-03-02
                                     Edit User
  
                              User Profile: DEFAULT_
  
  Please Mark Categories to Select
  
    General ................. _
  
    NATURAL MONITOR ......... _
  
  
  
  
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help        Exit        Save  Accpt                               Menu

The User Profile field usually refers to the user ID corresponding to the profile; in this case it contains the word DEFAULT. The categories on the screen refer to types of access rules as described in the following table:

Category Description
General Access rules that affect all of the systems within Natural Review. Valid values are Y/N.
NATURAL MONITOR Access rules pertaining to the Natural Monitor system. Valid values are Y/N.

For the user's default profile, you need to modify the general access rules in addition to those pertaining to Natural Monitor.

Displaying General Access Rules

When you select the general access rules, the General window appears as shown in the following screen:

                      General
  
             Name: ____________________
  
      Access NATURAL MONITOR System ....... Y
      Access User Profile System .......... Y
      Default Menu ........................ MM
      Confirm Purge/Save Requests ......... Y
  
      PF3=Exit  PF6=Accept
  

The Name field may be used for the user's name or any other appropriate identifier.

The following table describes the general access rules that appear in the General window.

General Access Rule Value Description
Access NATURAL MONITOR System Y

The user may access the Natural Monitor system.

This is the default value.

N The user may not access the Natural Monitor system.
Access User Profile System Y The user may access the User Profile system.

This is the default value.

N

The user may not access the User Profile system.

Note:
Before setting this access rule to N in the default profile, you must first create a user profile that allows you to access the User Profile system. Otherwise, you will not be able to maintain user profiles.

Default Menu Determines which menu screen appears on the user's terminal when the user logs on to Natural Review.
MM Natural Monitor Main Menu

This is the default value.

NM Natural Monitor Main Menu
UP User Profile System Main Menu
Confirm Purge/Save Requests Y Natural Monitor will prompt the user to confirm the request before the command is executed.

This is the default value.

N Natural Monitor will not prompt the user to confirm the request before the command is executed.

Displaying the Natural Monitor Access Rules

When the Natural Monitor category is selected, the NATURAL MONITOR window appears displaying access rules as shown below:

                   NATURAL MONITOR
  
     CANCEL/FORCE/TERMNAT/START/STOP Cmd .. Y
     Edit Report Definitions .............. Y
     Purge Historical Data ................ Y
     Purge Report Definitions ............. Y
     Purge Started Reports ................ Y
     Start Reports ........................ Y
     View Reports ......................... Y
  
     PF3=Exit  PF6=Accept

The following table describes the Natural Monitor access rules that appear in the NATURAL MONITOR window.

Natural Monitor Access Rule Value/Description
CANCEL/FORCE/TERMNAT/START/
STOP Cmd
 
Y The user may issue a CANCEL, FORCE, TERMNAT, START or STOP command.

This is the default value.

N The user may not issue a CANCEL, FORCE, TERMNAT, START or STOP command.
Edit Report Definitions
Y The user may edit response time reports (RT function).

This is the default value.

N The user may not edit response time reports.
Purge Historical Data
Y The user may delete historical data.

This is the default value.

N The user may not delete historical data.
Purge Report Definitions
Y The user may delete response time report definitions.

This is the default value.

N The user may not delete response time report definitions.
Purge Started Reports
Y The user may delete the data accumulated by response time reports that have been started.

This is the default value.

N The user may not delete the data.
Start Reports
Y The user may initiate data accumulation by starting response time reports.

This is the default value.

N The user may not start response time reports.
View Reports
Y The user may view the results of started response time reports online.

This is the default value.

N The user may not review the results of started response time reports online.

Modifying Access Rules

You may modify access rules by typing over the settings displayed on the screen. When you have made all of the changes to a particular group of access rules, you have the following options:

If you selected more than one category, pressing PF3 or PF6 displays the next access rules screen instead of returning you to the previous screen.

Creating a User Profile

Start of instruction setTo create a user profile

  1. From any screen within Natural Review, type the following string on the command line and press Enter:

    UP EU userid 
  2. From any screen within the User Profile System, type the following string on the command line and press Enter:

    EU userid

The User Profile System creates a profile for the user by copying the default profile. It then displays the user profile for editing, and the following message appears at the bottom of the screen:

REV00101 - NEW USER PROFILE

If you wish to customize the user's profile, mark the appropriate categories by typing a character on the line following your selection:

When the profile provides appropriate access privileges for the user, press PF5 to save the profile to the Natural library.

Refer to Customizing the Default Profile for information regarding access rules for the various categories.

Using the List User Profiles Function

The List User Profiles (LU) function displays a list of user profiles that are stored in the Natural library SYSRNM.

Start of instruction setTo access the list of user profiles

The User Profiles screen, similar to the one shown below, is displayed:

11:15:14           *****   R E V I E W NM UTILITY  *****                2000-09-01
                                   User Profiles
  
    Sel  Userid    Name                     Sel  Userid    Name
  
  ! __   DEFAULT
  ! __   GGS
  
  
  
  
  
  
  
  
  
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help        Exit                           +                      Menu

From this screen, you may edit or purge a particular user profile.

Start of instruction setTo access the Available Functions window that displays the available commands

The Available Functions window, similar to the one shown below, is displayed:

    Available Functions
  
    EU  Edit User Profile
    PU  Purge User Profile
    .   EXIT
  
    __  Enter Function
  

Editing a User Profile

Start of instruction setTo edit an existing user profile

The profile is displayed and can be edited. Refer to Customizing the Default Profile for additional information.

If you are editing your own user profile, the changes you make take effect as soon as you save your profile. If you are editing a profile other than your own, the changes do not take effect until the user next logs on to Natural Review.

You may also use this command to copy an existing profile to create a profile for a new user. If you have several users who require access privileges that are different from those specified in your default profile, you may use an existing profile as a model for the other profiles.

Copying a User Profile

Start of instruction setTo copy a profile

  1. Enter the command EU on the selection line preceding the profile name to be copied.

  2. Type the new user ID on the line labeled User Profile.

  3. Press PF5 to save the new user profile.

Purging a User Profile

Start of instruction setTo delete a user profile

Depending on the setting in your profile, you may or may not be prompted for confirmation of the purge command as shown in the following screen:

11:17:35         *****   R E V I E W  NM UTILITY *****                2000-09-01
                                   User Profiles
  
    Sel  Userid    Name                     Sel  Userid    Name
  
    __   DEFAULT
    PU   GGS
  
  
                                 +-------------------------------------+
                                 !                                     !
                                 ! Please confirm PURGE request for:   !
                                 !                                     !
                                 !              GGS                    !
                                 !                                     !
                                 !             (Y or N) Y              !
                                 !                                     !
                                 +-------------------------------------+
  
  
  
  Command ===>
  Enter-PF1---PF2---PF3---PF4---PF5---PF6---PF7---PF8---PF9---PF10--PF11--PF12---
        Help        Exit                           +                      Menu

Top of page

Using NATURAL User Exits

Natural Monitor has two Natural user exits which are applicable to the Natural Monitor components:

These exits are located in SYSRNM, the Natural Monitor system library in Natural. They can be modified using the Natural editor.

P-UEXIT1

This program is invoked when the online portion of Natural Monitor is entered. You may insert code into this program to satisfy site-specific needs.

Possible uses for this exit include:

Note:
This program must not alter the Natural stack, and it must end with a STOP command.

P-UEXIT2

This program is invoked when the online portion of Natural Monitor is terminated. You may insert code in this program to alter the processing that occurs when terminating Natural Review.

Possible uses for this exit include:

Top of page

Using the Natural Monitor User Exit: Response Time Detail Record

Each time a transaction finishes (a terminal write is performed), Natural Monitor creates a record that contains information about the resources consumed by that transaction:

A user exit (RNMRTUEX) is provided with Natural Monitor to allow the user to handle this information as follows:

The user can also write this record to a sequential data set or to SMF (System Management Facility) for later processing or as input to a chargeback system.

A sample RNMRTUEX user exit is supplied in the Natural Monitor source library. A copy book containing a DSECT mapping the detailed record is also provided.

This user exit can be modified to suit the needs of a user site and must be linked into the Natural nucleus with the rest of the Natural Monitor code in the step that links the Natural nucleus with Natural Monitor (see Step 8: Modify, Assemble and Link the Natural Review System Control Block of the Installation Procedure).

Calling Conventions to Invoke the User Exit

The following calling conventions are used to invoke the RNMRTUEX user exit:

Top of page

Accessing Historical Data in the NM Repository File

The Natural Monitor repository file contains Natural Monitor response time report definitions and historical data for response time reports that have a history interval. The historical data can be accessed by user-written applications and used as input for other processing (for example, trend analysis).

The view for this file is called REVIEW-NM-FILE.

The file can be read using the following key definition against the view field NM-KEY:

  1 REPORT-KEY                  (A50)
  1 REDEFINE REPORT-KEY
  2 REPORT-SUBSYSTEM            (A02)
  2 REPORT-DATE                 (N08)
  2 REPORT-TIME                 (N06)
  2 REPORT-NAME                 (A32)
  2 REPORT-SEQ                  (B02)
  

where:

Field Description
REPORT-SUBSYSTEM RT for the Response Time subsystem.
REPORT-DATE Date (in YYYYMMDD format) that the historical data record was written.
REPORT-TIME Time (in HHMMSS 24-hour format) that the historical data record was written.
REPORT-NAME Response time report name for which the historical data record was written.
REPORT-SEQ Record type for the historical data record.

Record type 1 is used for response time interval data (corresponding to the VW or VH display in the Response Time subsystem).

Record types 2 through n are used for response time detail records (corresponding to the VD display in the Response Time subsystem). The first detail record written for a given history interval will have a REPORT-SEQ = 2, and for each additional detail record written, the REPORT-SEQ field will increment by 1.

Two sample Natural programs are provided in the Natural Monitor library (SYSRNM) which read Response Time subsystem historical data. These two programs are called HISTORY1 and HISTORY2.

HISTORY1 is an example of how to read the response time interval history data (corresponding to the VW or VH command in the response time subsystem). For a specific response time report within a specified date and time range, HISTORY1 reads all associated response time interval history records and performs some summary statistical evaluation.

HISTORY2 is an example of how to read the response time detail history records (corresponding to the VD command in the response time subsystem). For a specific response time report within a specified date and time range, HISTORY2 reads all associated response time detail history records and displays summary information of the 20 detail records had the highest response time.

In addition to the two sample Natural programs, a Natural local data area (LDA) called L-NMHIST is provided which incorporates fields from the Natural Monitor DDM. This LDA may be used by user-written programs to read the Natural Monitor repository file. See Local Data Area View Description for the contents of this LDA.

Top of page

Setting Configuration Parameter Values

See Installing Natural Review, Storage Requirements, for an explanation of the effect of many response time reports on CICS SHARED storage requirements.

Within Natural Monitor, the Natural Monitor administrator modifies the configuration program for the following reasons:

The administrator uses parameters in the program P-NMCONF in library SYSRNM to control historical data and other response time report options.

The P-NMCONF program contains default configuration values for new response time report definitions. Parameter values set in the distributed P-NMCONF program are normally not changed until the default values have been in use for a test period. P-NMCONF program parameter values generally depend on the site's workload, application use, and response time.

The P-NMCONF program is a Natural program called from Natural Monitor code to set defaults in the Natural Monitor global data area. It can be edited just as any Natural program can be edited.

Start of instruction setTo access and edit the P-NMCONF configuration program

  1. Type LOGON SYSRNM at the Natural NEXT prompt and press Enter.

  2. Type EDIT P-NMCONF and press Enter.

  3. Modify the P-NMCONF program by typing over the existing values.

    Note:
    P-NMCONF parameters and values are discussed in the following sections.

  4. Type STOW and press Enter to save and catalog the changes.

  5. Type MENU at the prompt to return to Natural Review.

The changes you make to P-NMCONF take effect immediately.

P-NMCONF Response Time Parameters

The +RT-INTERVAL and +RT-THRESHOLD parameters are used in conjunction with one another to control the color and monochrome attributes of response time reports.

Parameter Description
+RT-INTERVAL Specifies the reporting interval (in seconds) used to graph a report horizontally and vertically. Valid values are 0.1 to 99.9 (default is 0.5).
+RT-THRESHOLD Specifies the transaction response time value (in seconds) above which Natural Monitor creates detailed records for the Detailed Records table. Valid values are 0 to 99.9 (default is 3.5).
+RT-MAX-DETAIL-RECS Specifies the maximum number of detailed response time records to be retained. Valid values are 0 to 999 (default is 20).
+RT-WRAP-OPTION
Specifies the wrap option. Valid values are:
NONE Detailed response time records are retained to the limit specified by the RT-MAX-DETAIL-RECS parameter.

This is the default value.

STD (standard) The most current response time records are retained.
HIGH The response time records with the highest value are retained.
+RT-TS-OPTION
Specifies the transaction summary option. Valid values are:
NONE No transaction summary is created.

This is the default value.

SUM A transaction summary is created for the root transaction program; for example, Nvrs for Natural, where vrs is the product version number.
DET A detailed transaction summary is created that includes Natural application information.

P-NMCONF Report Parameter

Parameter Description
+RT-AUTOSTART
Specifies the autostart option. Valid values are:
Y Report is autostarted by the Natural Monitor history task when it initializes.

This is the default value.

N Report is not autostarted.

P-NMCONF Historical Data Parameters

Parameter Description
+RT-HISTORY-INTERVAL Specifies the interval (in minutes) at which response time historical data is written to the Natural Monitor repository. Valid values are 0 to 999 minutes (default is 0).

Note:
A value of zero (0) prevents historical data from being written.

+RT-HISTORY-REFRESH
Specifies whether the response time report that has a history interval should be refreshed after the history interval has expired.
Y The history report is refreshed.

This is the default value.

N The report is not refreshed.

Top of page