Version 4.2.6 for Mainframes
 —  Natural for Ajax  —

TEXTGRID2

This document covers the following topics:


A Simple Example

The following example shows a TEXTGRID2 control:

graphics/image121.png

There are two columns which hold data. There is one column at the very left which displays a selection icon - in addition to a yellow background for a selected line. Even and odd lines are displayed in slightly different colors. At the very right of each title column, there is a symbol which indicates the sorting status; if you double-click on this symbol, the column is sorted first in ascending direction and, when clicking again, in descending direction. Change the sequence of columns by dragging the title of a column and dropping it on another column's title. Depending from where you drop, the column is either moved left or right.

The asterisk in the upper left corner of the grid is used to select/deselect all lines in the grid. The behavior depends on the setting of the singleselect property which determines whether multiple lines can be selected in the grid (default) or whether only one line can be selected:

The XML layout definition is:

<rowarea name="Textgrid">
    <itr takefullwidth="true" fixlayout="true">
        <textgrid2 griddataprop="lines" width="100%" height="200" selectprop="selected"
                   hscroll="true">
            <column name="First Name" property="firstName" width="50%">
            </column>
            <column name="Last Name" property="lastName" width="50%">
            </column>
        </textgrid2>
    </itr>
    <vdist height="5">
    </vdist>
</rowarea>

The TEXTGRID2 definition is bound to a grid data property lines.

Inside the TEXTGRID2 control definition there are two columns. These columns are bound to the properties firstName and lastName.

Top of page

Adapter Interface

In the parameter data area of the adapter, the grid data is represented by the following data structure:

DEFINE DATA PARAMETER
1 LINES (1:*)
2 FIRSTNAME (U) DYNAMIC
2 LASTNAME (U) DYNAMIC
2 SELECTED (L)
END-DEFINE

Top of page

Selecting Rows in a TEXTGRID2

Maybe you wonder why there is a selected field in the adapter parameter data area of the previous example.

This field is required for indicating which lines are currently selected and which are not. Each line which is displayed in the TEXTGRID2 control is represented in the adapter by an array occurrence of the array LINES. Therefore, the selection status of the grid (which lines are selected and which lines are not) is mirrored by the corresponding selected field of each array occurrence.

Top of page

TEXTGRID2 Properties

Basic
griddataprop

Name of the adapter parameter that represents the grid in the adapter.

Obligatory  
width

Width of the control.

There are three possibilities to define the width:

(A) You do not define a width at all. In this case the width of the control will either be a default width or - in case of container controls - it will follow the width that is occupied by its content.

(B) Pixel sizing: just input a number value (e.g. "100").

(C) Percentage sizing: input a percantage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a width this control can reference. If you specify this control to have a width of 50% then the parent element (e.g. an ITR-row) may itself define a width of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

Obligatory

100

120

140

160

180

200

50%

100%

height

Height of the control.

There are three possibilities to define the height:

(A) You do not define a height at all. As consequence the control will be rendered with its default height. If the control is a container control (containing) other controls then the height of the control will follow the height of its content.

(B) Pixel sizing: just input a number value (e.g. "20").

(C) Percentage sizing: input a percantage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element of the control properly defines a height this control can reference. If you specify this control to have a height of 50% then the parent element (e.g. an ITR-row) may itself define a height of "100%". If the parent element does not specify a width then the rendering result may not represent what you expect.

Obligatory

100

150

200

250

300

250

400

50%

100%

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
Selection
selectableprop

Name of the adapter parameter that specifies wether a row in the grid is selectable (=true) or not (=false). The default is selectable.

Optional  
selectprop

Name of the adapter parameter that is used to mark if an individual row of the text grid is selected.

If the user selects a text grid row, the value "true" is passed into the corresponding array element of the adapter parameter.

Optional  
singleselect

If set to "true" then only one row can be selected inside the text grid. - If set to "false" then multiple lines can be selected by using Ctrl- and Shift-key during mouse selection.

Default is "false".

Optional

true

false

singleselectprop

Name of an adapter parameter that dynamically defines whether SINGLESELECT is true or false.

Optional  
onclickmethod

Name of the event that is sent to the adapter when the user selects a row.

In the event handler you can find the selected rows by iterating through the rows and finding out which one's selected element is set to "true".

Optional  
ondblclickmethod

Name of the event that is sent to the adapter when the user selects a row by a double click.

In the event handler you can find the selected rows by iterating through the rows and finding out which one's selected element is set to "true".

Optional  
withselectioncolumn

When defining a SELECTPROP property then automatically a selection column is added as first left column of the grid. Inside the column an icon inidicates if a row is currently selected.

Set this property to "false" in order to avoid the selection column.

Optional

true

false

withselectioncolumnicon

Flag that indicates whether the selection column shows a "select all" icon on top. Default is true.

Optional

true

false

fgselect

if switched to true then an additional "graying" of selected lines will be activated. Switch this property to "true" if you have coloured textgrid cells: the selection colour will not override the colour of each cell, as consequence you require an additional effect in order to make the user see which row is selected.

Optional

true

false

focusedprop

Name of an adapter parameter that is used to mark if an individual row of the text grid should receive the focus.

If the user selects a text grid row, the value "true" is passed into the corresponding array element of the adapter parameter.

Optional  
Right Mouse Button
oncontextmenumethod

Name of the event that is sent to the adapter when the user clicks with the right mouse button onto an empty area of the grid.

Optional  
singleselectcontextmenu

With SHIFT and CTRL key the user can select multiple lines (use property SINGLESELECT to suppress this feature). Use this property to ensure that the context menu is requested only for a single line.

Default is "false".

Optional

true

false

noselection

enabledefaultcontextmenu

Use this property to enable the default context menu of the browser within the textgrid. Please note: do not enable the browser's context menu if your application itself provides for a context menu.

Default is "false".

Optional

true

false

Appearance
width (already explained above)    
height (already explained above)    
minapparentrows

Number of rows that are displayed independent of the size of the server side collection.

Optional

1

2

3

int-value

hscroll

Definition of the horizontal scrollbar's appearance.

You can define that the scrollbars only are shown if the content is exceeding the control's area ("auto"). Or scrollbars can be shown always ("scroll"). Or scrollbars are never shown - and the content is cut ("hidden").

Default is "auto".

Sometimes obligatory

auto

scroll

hidden

withtitlerow

If defined as "false" then no top title row is shown.

"True" is default.

Optional

true

false

colspan

Column spanning of control.

If you use TR table rows then you may sometimes want to control the number of columns your control occupies. By default it is "1" - but you may want to define the control to span over more than one columns.

The property only makes sense in table rows that are snychronized within one container (i.e. TR, STR table rows). It does not make sense in ITR rows, because these rows are explicitly not synched.

Optional

1

2

3

4

5

50

int-value

rowspan

Row spanning of control.

If you use TR table rows then you may sometimes want to control the number of rows your control occupies. By default it is "1" - but you may want to define the control two span over more than one columns.

The property only makes sense in table rows that are snychronized within one container (i.e. TR, STR table rows). It does not make sense in ITR rows, because these rows are explicitly not synched.

Optional

1

2

3

4

5

50

int-value

personalizable

If defined to "false" then no re-arranging of columns is offered to the user.

Default is "true". This means: if using COLUMN controls inside the grid definition then the user can re-arrange the sequence of columns by dragging and dropping them within the top title row.

Optional

true

false

stylevariant

Some controls offer the possibility to define style variants. By this style variant you can address different styles inside your style sheet definition file (.css). If not defined "normal" styles are chosen, if defined (e.g. "VAR1") then other style definitions (xxxVAR1xxx) are chosen.

Purpose: you can set up style variants in the style sheet defintion and use them multiple times by addressing them via the "stylevariant" property. CIS currently offerst two variants "VAR1" and "VAR2" but does not predefine any semantics behind - this is up to you!

Optional

VAR1

VAR2

backgroundstyle

CSS style definition that is directly passed into this control.

With the style you can individually influence the rendering of the control. You can specify any style sheet expressions. Examples are:

border: 1px solid #FF0000

background-color: #808080

You can combine expressions by appending and separating them with a semicolon.

Sometimes it is useful to have a look into the generated HTML code in order to know where direct style definitions are applied. Press right mouse-button in your browser and select the "View source" or "View frame's source" function.

Optional  
vscroll

Definition of the vertical scrollbar's appearance.

You can define that scrollbars only are shown if the content is exceeding the control's area ("auto"). Or scrollbars can be shown always ("scroll"). Or scrollbars are never shown - and the content is cut ("hidden").

Default is "auto".

Optional

auto

scroll

hidden

withrollover

The textgrid controls provide for a so called "roll over" effect. The row that is currently below the mouse pointer is highlighted in a certain way. Use this property to disable the roll over effect (Default is TRUE).

Optional

true

false

fixedcolumnsizes

When switching the FIXEDCOLUMNSIZES property to value "true" then internally the grid is arranged in a way that the area always determines its size out of the width specification of the COLUMN controls. The browser does not look into the column contents in order to try to optimise the size of the area - but always follows the width that you define.

Optional

true

false

requiredheight

Minimum height of the control in pixels. Use this property to ensure a minimum height if the overall control's height is a percentage of the available space - i.e. if value of property HEIGHT is a percentage (e.g. 100%).

Please note:You must not use FIXLAYOUT at the surrounding row container (ITR and ROWAREA). Otherwise: if the available space is less than the required height the end of the control is just cut off.

Optional

1

2

3

int-value

disablecolumnresizing

Flag that indicates if the user can change the width of the grid columns. Default is false.

Optional

true

false

disablecolumnmoving

Flag that indicates if the user can change the order of grid columns. Default is false.

Optional

true

false

tabindex

Index that defines the tab order of the control. Controls are selected in increasing index order and in source order to resolve duplicates.

Optional

-1

0

1

2

5

10

32767

Drag And Drop
draginfoprop

Name of the row item property that passes back the line's "drag info". When using this attribute the grid lines can be dragged onto "drop targets" (e.g. DROPICON control). The dragged line is identified by its "drag info". Use any string/information applicable.

Optional  
Natural
njx:natname

If a Natural variable with a name not valid for Application Designer (for instance #FIELD1) shall be bound to the control, a different name (for instance HFIELD1) can be bound instead. If the original name (in this case #FIELD1) is then specified in this attribute, the original name is generated into the parameter data area of the Natural adapter and a mapping between the two names is generated into the PROCESS PAGE statement of the Natural adapter.

Optional  
njx:natcomment

The value of this attribute is generated as comment line into the parameter data area of the Natural adapter, before the field name. The Map Converter, for instance, uses this attributes to indicate for a generated statusprop variable to which field the statusprop belongs.

Optional  
Deprecated
directselectevent

Use ONCLICKMETHOD and ONDBLCLICKMETHOD instead.

Optional

ondblclick

onclick

directselectmethod

Use ONCLICKMETHOD and ONDBLCLICKMETHOD instead.

Optional  

Top of page

COLUMN Properties

The COLUMN tag is the typical tag that is placed inside a TEXTGRID2 definition. The COLUMN definition defines a column with its binding to a property of the collection elements.

Basic
name

Text that is displayed inside the control. Please do not specify the name when using the multi language management - but specify a "textid" instead.

Sometimes obligatory  
textid

Multi language dependent text that is displayed inside the control. The "textid" is translated into a corresponding string at runtime.

Do not specify a "name" inside the control if specifying a "textid".

Sometimes obligatory  
property

Property of the row item object that represents the column's content.

The content typically is straight text but can also be "complex HTML".

Obligatory  
width

Width of the control.

There are two possibilities to define the width:

(A) Pixel sizing: just input a number value (e.g. "100").

(B) Percentage sizing: input a percentage value (e.g. "50%"). Pay attention: percentage sizing will only bring up correct results if the parent element (textgrid2, textgridsss2) of the control properly defines a width this control can reference.

Obligatory

100

120

140

160

180

200

50%

100%

comment

Comment without any effect on rendering and behaviour. The comment is shown in the layout editor's tree view.

Optional  
Appearance
datatype

By default, the control is managing its content as string. By explicitly setting a datatype you can define that the control will format the data coming from the server: if the field has datatype "date" and the user inputs "010304" then the input will be translated into "01.03.2004" (or other representation, dependent on date format settings).

Please note: the datatype "float" is named a bit misleading - it represents any decimal format number. The server side representation may be a float value, but also can be a double or a BigDecimal property.

Optional

date

float

int

long

time

timestamp

color

xs:decimal

xs:double

xs:date

xs:dateTime

xs:time

------------------------

N n.n

P n.n

string n

xs:byte

xs:short

align

Horizontal alignment of the control's content.

Optional

left

center

right

straighttext

If the text of the control contains HTML tags then these are by default interpreted by the browser. Specifiying STRAIGHTTEXT as "true" means that the browser will directly render the characters without HTML interpretation.

Example: if you want to output the source of an HTML text then STRAIGHTTEXT should be set to "true".

MOZILLA: this property is not available in Mozilla!

Optional

true

false

convertspaces

If switched to "true" then all spaces inside the text that is rendered into the column are converted to non breakable spaces (andnbsp\").

Use this option if you have "meaningful" spaces inside the values you return from the server adapter object, e.g. if outputting some ASCII protocol inside a column.

Optional

true

false

cuttextline

If switched to "false" then the content of the column is broken if it excceeds the column's width definition. Default is "true" i.e. if the content is too big for the column cell then it is cut.

Optional

true

false

withsorticon

Flag that indicates if a small sort indicator is shown within the right corner of the control. Default is TRUE.

Optional

true

false

headerimage

URL of image that is displayed inside the control. Any image type (.gif, .jpg, ...) that your browser does understand is valid.

Use the following options to specify the URL:

(A) Define the URL relative to your page. Your page is generated directly into your project's folder. Specifiying "images/xyz.gif" will point into a directory parallel to your page. Specifying "../HTMLBasedGUI/images/new.gif" will point to an image of a neighbour project.

(B) Define a complete URL, like "http://www.softwareag.com/images/logo.gif".

Optional  
Binding
property (already explained above)    
textstyleprop

Name of the adapter parameter that provides a style-string that is used for rendering the column's content.

As consequence you can indiviudally assign a CSS-style to each cell of your text grid.

Optional  
textclassprop

Name of the adapter parameter that provides a style class to be used for rendering the content.

You can set up a limited number of style classes inside your style sheet definition - and dynamically reference them per grid cell.

Optional  
imageprop

Name of the adapter parameter that provides an image URL. The image is rendered at the very left of the column's area - in front of the text (PROPERTY property definition).

Optional  
linkmethod

Name of the event that is sent to the adapter if user clicks the column's text.

Optional  
celltitleprop

Name of the adapter parameter that provides the tooltip of this cell.

Optional  
Online help
title

Text that is shown as tooltip for the control.

Either specify the text "hard" by using this TITLE property - or use the TITLETEXTID in order to define a language dependent literal.

Optional  
titletextid

Text ID that is passed to the multi lanaguage management - representing the tooltip text that is used for the control.

Optional  
sorttitle

Text that is shown as tooltip for the sort indicator.

Either input text by using this SORTTITLE property - or use the SORTTITLETEXTID in order to define a language dependent literal.

Optional  
sorttitletextid

Text ID that is passed to the multi lanaguage management - representing the tooltip text for the sort indicator.

Optional  
celltitleprop (already explained above)    
Natural
njx:natstringtype

If the control shall be bound to a Natural system variable of string format with the attribute njx:natsysvar, this attribute indicates the format of the string, A (code page) or U (Unicode). The default is A.

Optional  
njx:natsysio

If the control shall be bound to a Natural system variable with the attribute njx:natsysvar, this attribute indicates if the system variable is modifiable. The default is false.

Optional  
njx:natname

If a Natural variable with a name not valid for Application Designer (for instance #FIELD1) shall be bound to the control, a different name (for instance HFIELD1) can be bound instead. If the original name (in this case #FIELD1) is then specified in this attribute, the original name is generated into the parameter data area of the Natural adapter and a mapping between the two names is generated into the PROCESS PAGE statement of the Natural adapter.

Optional  
njx:natsysvar

If the control shall be bound to a Natural system variable, this attribute specifies the name of the system variable.

Optional  
njx:natcomment

The value of this attribute is generated as comment line into the parameter data area of the Natural adapter, before the field name. The Map Converter, for instance, uses this attributes to indicate for a generated statusprop variable to which field the statusprop belongs.

Optional  
njx:natcv

Name of a Natural control variable that shall be assigned to the control. The control variable must be defined in a Data Definition (XCIDATADEF) control on the same page. The application can use the control variable to check the modification status of the control.

Optional  

Top of page

Dynamic Setting of Text Styles in TEXTGRID2

The example from the previous sections will now be enhanced in order to demonstrate how to control the style of cells inside a TEXTGRID2 control dynamically:

graphics/image123.png

Some of the cells in the TEXTGRID2 control are rendered with a different style than the normal one. Each COLUMN definition has the property textstyleprop:

<rowarea name="Textgrid">
    <itr takefullwidth="true" fixlayout="true">
        <textgrid2 griddataprop="lines" width="100%" height="200" selectprop="selected"
                   hscroll="true">
            <column name="First Name" property="firstName" width="50%"
                    textstyleprop="firstNameStyle">
            </column>
            <column name="Last Name" property="lastname" width="50%"
                    textstyleprop="lastNameStyle">
            </column>
        </textgrid2>
    </itr>
    <vdist height="5">
    </vdist>
    <itr>
        <button name="Remove Selected Items" method="onRemoveSelectedItems">
        </button>
    </itr>
</rowarea>

Top of page