| Text | ESY5651 Requested catalog does not exist. |
| Expl. | The requested CVOL doesn"t exist. |
| Actn. | Specify valid CVOL. |
| Text | ESY5652 Catalog structure inconsistent. |
| Expl. | The catalog structure is inconsistent. |
| Actn. | Notify the system programmer. |
| Text | ESY5653 Cannot delete index. |
| Expl. | The index cannot be deleted. |
| Actn. | No action is required. |
| Text | ESY5654 Index structure does not exist. |
| Actn. | No action is required. |
| Text | ESY5655 Insufficient space on catalog data set. |
| Expl. | The catalog data set is full. |
| Actn. | Notify the system programmer. |
| Text | ESY5656 Error cataloging generation data set. |
| Expl. | An error occurred while cataloging a generation data set. |
| Actn. | Check specified values; if valid, contact the system programmer. |
| Text | ESY5657 I/O error on catalog. |
| Expl. | An I/O error occurred while accessing the catalog. |
| Actn. | This is probably a hardware error, contact the system programmer. |
| Text | ESY5658 Data set is not catalogued. |
| Expl. | The specified data set is not catalogued. |
| Actn. | No action is required. |
| Text | ESY5659 Data set is already catalogued. |
| Expl. | The specified data set is already catalogued. |
| Actn. | No action is required. |
| Text | ESY5660 ... - ... module not available. |
| Expl. | The specified NATURAL module was not found. |
| Actn. | Specify name of an existant NATURAL module. |
| Text | ESY5661 ... - NATURAL sub-task already active. |
| Expl. | A NATURAL subtask is already active for this user. |
| Actn. | Make sure that subtask is closed prior restarting it. |
| Text | ESY5662 ... - NATURAL sub-task not allowed. |
| Expl. | The NATURAL subtask system has not been initialized. |
| Actn. | Notify system programmer. |
| Text | ESY5663 ... - NATURAL sub-task not active. |
| Expl. | The NATURAL subtask does not exist. |
| Actn. | No action is required. |
| Text | ESY5664 ... - NATURAL sub-task table full. |
| Expl. | The maximum number of NATURAL subtasks is reached. |
| Actn. | Notify system programmer. |
| Text | ESY5665 ... - invalid action requested. |
| Expl. | An invalid action was requested. |
| Actn. | Specify valid action. |
| Text | ESY5666 ... - NATURAL sub-task must have parameters. |
| Expl. | An attempt was made to start a NATURAL subtask without
parameters. |
| Actn. | Specify parameter for NATURAL subtask. |
| Text | ESY5669 :1:. |
| Expl. | An error occurred during a SPOOL-UPDATE request. The error
message text generally is a POWER error message returned by the internally generated PALTER command. |
| Actn. | Check operands for validity and consistency and resubmit. |
| Text | ESY5670 View not supported. |
| Expl. | This view is not supported on the local operating sytem. |
| Text | ESY5671 Class missing or is invalid. |
| Expl. | The function CHANGE requires a valid NEW-CLASS, NEW-DESTINATION
or NEW-USERID value. |
| Text | ESY5672 Segment option requires JOBNAME/JOBNUMBER. |
| Expl. | Specifying the "SEGMENT" option (SEGMENT-NUMBER>0)
requires that the job is identified with Jobname and Job-number. |
| Text | ESY5673 Access error due to FILETABLE=STATIC. |
| Expl. | The requested file could not be accessed because the Entire
System Server startup parameter "FILETABLE" was specified as "STATIC". Only those files available at ESY initialization time (STD,PARSTD & TEMP labels) can therefore be accessed. |
| Actn. | To allow dynamic access of files NOT specified at ESY
initialization time, change the "FILETABLE" parameter to "DYNAMIC" and restart Entire System Server. |
| Text | ESY5674 VTOC error reading format-3 labels. |
| Expl. | VTOC error reading format-3 labels for the requested file. |
| Actn. | Information message only. No action necessary or possible. |
| Text | ESY5675 ... not supported. |
| Expl. | Entire System Server has detected that the requested file has attributes which are not supported by this version of ESY. e.g. Multi-volume files, Multi-extent output files etc. |
| Text | ESY5676 Not first volume of a multi-volume file. |
| Expl. | Entire System Server has detected that the file on the specified volume is NOT the first volume/extent of a multi-volume file. |
| Expl. | A FAMS error occurred while COPY-FILE was copying one or more program objects. |
| Actn. | Check the console log for IGW prefixed messages issued by FAMS for further information |
| Text | ESY5678 Member already exists. |
| Expl. | In WRITE-FILE or COPY-FILE, REPLACE = "NO" was
specified, however the member exists. |
| Actn. | No action rquired. |
| Text | ESY5679 Input and output files are incompatible. |
| Expl. | COPY-FILE has determined that the record formats of the input and output files are not compatible (RECFM does not match, block size incompatibilities, etc.). |
| Actn. | Verify data set attributes and reissue request with correct
parameters. |
| Text | ESY5680 Job/output is protected. |
| Expl. | The user is not authorized to access the specified job/output. |
| Actn. | Notify system programmer. |
| Text | ESY5681 Job/output is active. |
| Expl. | The specified job/output is currently active. |
| Actn. | There is no action required. |
| Text | ESY5682 Job/output is not dispatchable. |
| Expl. | The job/output is not dispatchable. |
| Actn. | There is no action required. |
| Text | ESY5683 FAMS error, R15=..., R0=.... |
| Expl. | A FAMS error occurred while COPY-FILE was copying one or more program objects. |
| Actn. | Check the console log for IGW prefixed messages issued by FAMS for further information. |
| Text | ESY5684 Remote program object copy currently unsupported. |
| Expl. | In this release of Entire System Server, use of COPY-FILE on
OS/390 for copying program objects between different nodes is not supported. This message is also issued if a program object copy request is issued to a VSE/ESA node. |
| Actn. | A workaround is to first copy the program object to a PDS on the local node, then copy to a PDS on the remote node, then copy to the target PDSE. |
| Text | FAMS subtask abended. |
| Expl. | One of the subtasks used by remote program object copy has
abnormally terminated. The ERROR-NODE and ERROR-VIEW fields will show which node had the ABEND. Information regarding the ABEND will be in the JES log. |
| Actn. | Contact Software AG support. |
| Text | ESY5687 Bad variable record. |
| Expl. | Bad variable record. |
| Actn. | No action is required. |
| Text | ESY5688 Return code ... HCF function .... |
| Expl. | The HCF function failed. The return code is the HCF return code. |
| Actn. | Notify system programmer |
| Text | ESY5690 1: error :2: during :3:. |
| Expl. | An error occurred accessing PANVALET or LIBRARIAN data. |
| Actn. | Notify system programmer. |
| Text | ESY5691 Error while accessing librarian member. |
| Expl. | AN error occurred accessing a LIBRARIAN member. |
| Actn. | There is no action required. |
| Text | ESY5692 You are not permitted to access member. |
| Expl. | This user is not authorized to access the specified member. |
| Actn. | Check with system programmer. |
| Text | ESY5693 .... |
| Expl. | A PANVALET error occurred. |
| Actn. | See message text. |
| Text | ESY5694 Strange error opening VTOC. |
| Expl. | A strange internal error occurred reading the VTOC. |
| Actn. | Notify system programmer. |
| Text | ESY5695 VTOC is in use. |
| Expl. | The VTOC is currently in use. |
| Actn. | Retry. |
| Text | ESY5696 Cannot assign logical unit. |
| Expl. | A logical unit could not be assigned. |
| Actn. | Notify system programmer. |
| Text | ESY5697 Library/sublibrary not found. |
| Expl. | The specified library/sublibrary was not found. |
| Actn. | Specify valid library/sublibrary name. |
| Text | ESY5698 Internal LIBRARIAN error has occurred. |
| Expl. | An internal LIBRARIAN error occurred. |
| Actn. | Notify system programmer. |
| Text | ESY5699 Not enough main storage available. |
| Expl. | Not enough main storage was available to process the request. |
| Actn. | Notify system programmer. |
| Text | ESY5700 Invalid value specified (DSORG / RECFM / TYPE). |
| Expl. | An invalid value was specified for view FILE-ALLOCATE. Note: A more detailed message is returned when field ERROR-TEXT is specified. |
| Actn. | Specify valid value for DSORG / RECFM / TYPE. |
