This section describes the rules which apply when a user logs on to Natural under Natural Security. It covers the following topics:
注意:
If a user invokes Natural under Natural Security and the FNAT system
file specified in the parameter file/module used is a non-Security system file,
Natural cannot be started, and the user will receive an appropriate error
message.
The logon procedure is used by Natural Security to ensure that the user who is logging on to Natural is authorized for the library requested.
A logon must be executed successfully before any Natural session can be started.
A logon screen (on mainframe computers, under UNIX and OpenVMS) or logon dialog box (under Windows) is provided for the user to enter the information required for the logon.
When Natural Security is installed, the Natural Security logon screen will be displayed whenever a user invokes Natural.
Under Windows, the logon screen is displayed as a dialog box (for the sake of consistency, however, it will also be referred to as "logon screen").
The logon screen requests the user to enter the following:
| Library ID |
The ID of the library to be used. To determine which libraries are available, the user may enter his/her user ID in the user ID field and an asterisk (*) in the library ID field: a list of all libraries available to the user will be displayed. The list contains all non-protected libraries and all protected libraries to which the user is linked (either directly, or via a group whose security profile is activated). The list also contains all libraries available to the user's terminal (if the terminal is defined to Natural Security. To view a list of all libraries available to the terminal, the user may enter an asterisk (*) in the library ID field without entering a user ID.) 注意: |
|---|---|
| User ID |
The ID by which the user is defined to Natural Security. The ID of a group must not be entered; a terminal ID must not be entered either. If no user ID is entered, Natural Security will use the ID of the terminal being used. In this case the terminal has to be defined to Natural Security; otherwise the logon will be rejected. |
| Password |
The password specified in the user's security profile. If no password has been specified in the user's security profile, the password will be identical to the user ID (when a newly defined user logs on for the first time and the password is identical to the user ID, the user must change his/her password by entering a new password in the New Password field). |
| New Password |
If a valid password has been entered in the Password field and the user wishes/has to change that password, the user enters a new password in this field. This new password will then replace the old password and will from then on be the valid password for the user. |
The following rules apply for entering values on the logon screen:
If a user ID is entered, a password must also be entered.
If no user ID is entered, no password is required.
A new password can only be entered if a valid password is entered as well.
In a user's security profile, the Natural Security administrator may change the password, and may also set a time interval, after which the user will be forced to change the password. The user will then have to enter a password and a new password to be able to log on (for details on these options, see the section User Maintenance).
If a user has forgotten his or her password, he/she will have to contact the Natural Security administrator, who may then specify a new password in the user's security profile. This will then be the valid password for the user (which he/she may change again in the logon screen).
A password or new password when entered will not be displayed on the screen.
You can customize the logon screen / logon dialog box to suit your requirements:
Mainframe computers, UNIX and OpenVMS:
The source code of the logon screen, map NOGONM1, is provided in
the library SYSSEC. To customize the logon screen, you make a copy of NOGONM1,
store it under the name LOGONM1, modify it to suit your requirements, catalog
it, and then copy the cataloged object LOGONM1 into the library SYSLIB. Should
LOGONM1 be missing from SYSLIB, the Natural Security installation procedure
will automatically copy the object module NOGONM1 from SYSSEC to SYSLIB and
store it there under the name LOGONM1; this ensures that a default logon screen
is always present if no customized one is used.
Windows:
The same applies as described above for the logon screen - except
that the names for logon dialog box are different: The source provided in the
library SYSSEC is called GNOGONM1, and the object to be copied into the library
SYSLIB is called GLOGONM1.
There are also logon-related user exits available, which may be used to customize the logon procedure (see Logon-Related User Exits in the section User Exits).
A logon to a library will be rejected if:
the user is not defined to Natural Security;
the user's security profile is currently inactive (due to Activation Dates settings);
the user is defined as user type MEMBER and has not been assigned to a group;
the user is defined as user type MEMBER, and the security profile of the group to which he/she is assigned is currently inactive (due to Activation Dates settings);
the library is not defined to Natural Security;
the time window restrictions defined in the library's security profile do not permit use of the library at the time of the logon;
the library is protected and the user is not linked to the library;
the library is protected and the user is linked to it, but the link has been temporarily locked;
the library is protected, and the group via which the user is linked to the library is currently inactive (due to Activation Dates settings in the group security profile);
a non-existent startup transaction is specified in the library's security profile;
the NEXT/MORE line is not allowed nor a startup transaction specified in the library's security profile.
If no library ID is entered in the logon screen, the default library specified in the user's security profile will be invoked.
If no default library is specified in the user's security profile, the "Privileged Groups" specified in the user's security profile will be checked (in order of entry) for a default library.
If none of the Privileged Groups has a default library either, the user's private library will be invoked.
If neither default libraries nor a private library exist, the user must enter a library ID when he or she logs on.
If "RESTART" is entered as the library ID, the last RESTARTable library to which the user was logged on will be invoked (for details on the "RESTART" option, see Transactions in the section Library Maintenance).
注意:
The ID of the last RESTARTable library to which a user was logged
on is shown in the field "Last Library" in the user security
profile.
If "FIN" is entered as the library ID, the Natural session will be terminated.
After a successful logon to a library the following may be invoked:
the startup transaction specified in the library's security profile (if specified);
the Natural main menu, if no startup transaction is specified.
注意:
Internally, Natural Security performs an END OF
TRANSACTION statement after a successful logon if any of the following
applies:
the user's password has been changed during the logon procedure;
a logon error has occurred during the logon procedure;
the "Logon recorded" option in the user's or the library's security profile is set to "Y";
the "Restart" option in the library profile is set to "Y";
the "Lock User Option" in the General Options (Administrator Services) is set to"X".
If the first logon to a library at the beginning of a Natural session was successful, a user may change from one library to another by using the Natural system command LOGON.
See also the Natural System Commands documentation for information on the LOGON system command.
The LOGON command takes the following parameters:
If no parameter is specified, the default library will be invoked (either the user's or one of the privileged group's); if no default library is specified, the Natural Security logon screen will be invoked. For example:
LOGON
If one parameter is specified, it will be interpreted as a library ID. For example:
LOGON LIBX
LOGON *
If two parameters are specified, the first will be interpreted as a user ID, the second as a password. For example:
LOGON USERX PASSWX
If three parameters are specified, the first will be interpreted as a library ID, the second as a user ID, the third as a password. For example:
LOGON LIBX USERX PASSWX
If four parameters are specified, the first will be interpreted as a library ID, the second as a user ID, the third as a password, the fourth as a new password. For example:
LOGON LIBX USERX PASSWX NEWPASSX
If an error is detected during logon processing, Natural Security will display an error message.
If the LOGON command has been invoked from a library, Natural Security will invoke the error transaction defined for the library. If no error transaction is defined, the logon screen will be invoked.
Users would normally have to log on twice, first to the operating system and second to Natural. To eliminate the need for a second logon, you may set the Natural profile parameter AUTO to AUTO=ON (which is described in the Natural Parameter Reference documentation).
As a result, an internal Natural Security logon procedure will be invoked, which uses the operating-system login name (as contained in the Natural system variable *INIT-USER) as the user ID, but no password (on the assumption that this has been verified by the operating-system logon procedure). The Natural Security logon screen will be suppressed. A logon with a user ID other than the operating-system login name will not be possible.
If AUTO=ON is used, the user has no possibility of specifying a library ID. The library to which the user will be logged on is determined by the same rules as described under Logon Without Library ID above. This means that automatic logon is only possible if a default library is specified (for the user or one of his/her Privileged Groups) or the user has a private library.
If you combine AUTO=ON with specifying a default library in a user's security profile and with specifying a startup transaction for that library, the user will receive the first screen of the default library immediately after invoking Natural without having to pass any intermediate screens (default libraries are described under Components of a User Profile in the section User Maintenance, startup transactions under Transactions in the section Library Maintenance).
If AUTO=ON is set, the system command LOGOFF has the same result as the system command FIN (see How to End a Natural Session below).
If AUTO=ON is set, and after the initial automatic logon the user tries to log on to another library and causes a logon error, the error transaction for the current library will be invoked. If no error transaction is specified, an error message will be issued and then the startup transaction (if specified) for the current library will be invoked.
The following Natural system commands may be used to end a Natural session under Natural Security:
| LOGOFF | This command terminates a Natural session and invokes the logon
screen. To leave the logon screen, you enter "FIN" as the library
ID.
If the profile parameter AUTO=ON is set (see Automatic Logon above), the LOGOFF command has the same effect as the FIN command. |
|---|---|
| LOGON (without parameters) |
This command terminates a Natural session and starts the logon
procedure, invoking either a default library or the logon screen (if no default
library is defined).
See also Automatic Logon above. |
| FIN | This command terminates a Natural session and is used to leave Natural altogether. |
 |
注意: Natural Security cannot protect your Natural environment against unauthorized use if Natural users leave their terminals unattended whilst being logged on to Natural. Therefore, users should be reminded to use the LOGOFF command before they leave their terminal. Unauthorized persons will then be confronted with the Natural Security logon screen and may only use what has been defined for them to use under Natural Security. |
In library security profiles, you can specify a non-activity time limit, after which a logoff will be executed automatically.
