UEDIT Menu Display

Overview of Messages

EDT0000 | EDT0001 | EDT0002 | EDT0003 | EDT0004 | EDT0005 | EDT0006 | EDT0007 | EDT0008 | EDT0009 | EDT0010 | EDT0011 | EDT0012 | EDT0013 | EDT0014 | EDT0015 | EDT0016 | EDT0017 | EDT0018 | EDT0020 | EDT0021 | EDT0022 | EDT0023 | EDT0024 | EDT0025 | EDT0026 | EDT0027 | EDT0028 | EDT0029 | EDT0030 | EDT0031 | EDT0032 | EDT0033 | EDT0034 | EDT0035 | EDT0036 | EDT0037 | EDT0038 | EDT0039 | EDT0040 | EDT0041 | EDT0042 | EDT0045 | EDT0047 | EDT0050 | EDT0051 | EDT0052 | EDT0053 | EDT0054 | EDT0055 | EDT0056 | EDT0057 | EDT0058 | EDT0059 | EDT0060 | EDT0061 | EDT0062 | EDT0063 | EDT0064 | EDT0065

EDT0000	Work file size too large
Explanation:	An attempt was made to create a work file. The number of blocks requested was calculated to exceed 100 tracks.
System action:	The request is ignored and processing continues.
Terminal operator info:	A smaller size (fewer blocks) should be requested.

EDT0001	Profile Processor Error
Explanation:	Self-explanatory message.

EDT0002	Statement Handler Error
Explanation:	Self-explanatory message.

EDT0003	Illegal Fetch
Explanation:	Self-explanatory message.

EDT0004	Invalid Tabs Specified
Explanation:	Self-explanatory message.

EDT0005	Security Violation
Explanation:	Self-explanatory message.

EDT0006	Unable To Load Module UETABS
Explanation:	Self-explanatory message.

EDT0007	Unrecognised Response
Explanation:	Self-explanatory message.

EDT0008	SD file is in use
Explanation:	This message is associated with a function that uses an SD file. When Com-plete attempted to open the user's SD file, it was found to be in use.
System action:	No action takes place.
Terminal operator info:	Terminate any other edit functions that might be using the same SD file. If this does not solve the problem, contact your system programmer.

EDT0009	Record length error
Explanation:	A member of a PDS of a length less than 80 or more than 255 bytes is being edited.
System action:	None.
Terminal operator info:	Correct the length of the data set and retry.

EDT0010	No SD file to recover
Explanation:	The user attempted to recover a lost edit session and the SD file could not be found by the system.
System action:	None.
Terminal operator info:	None.

EDT0011	Access denied
Explanation:	A user exit has denied access to the data set.
System action:	None.
Terminal operator info:	None.

EDT0012	Aborted by userexit
Explanation:	A user exit has caused the requested operation to be aborted.
System action:	None.
Terminal operator info:	None.

EDT0013	PANSEQ DDcard missing
Explanation:	The PANSEQ DDCARD is missing from the Com-plete startup JCL. The PANVALET interface will not function without it.
System action:	None.
Terminal operator info:	Contact the system programmer.

EDT0014	LIBSEQ DDcard missing
Explanation:	The LIBSEQ DDCARD is missing the Com-plete JCL. The librarian interface will not function without it.
System action:	None.
Terminal operator info:	Contact the system programmer.

EDT0015	DDcard missing
Explanation:	The DDCARD for the library being edited through PANVALET or LIBRARIAN access routines is missing.
System action:	None.
Terminal operator info:	Contact the system programmer.

EDT0016	Member empty
Explanation:	An empty PDS member is being edited.
System action:	None.
Terminal operator info:	None.

EDT0017	LIBRARIAN error, Rc=X'$1'
Explanation:	There is an error in the LIBRARIAN ACCESS module.
System action:	None.
Terminal operator info:	Contact the system programmer.

EDT0018	BLDL error
Explanation:	A probable hardware error has occurred while building BLDL information.
System action:	None.
Terminal operator info:	Inform the system programmer.

EDT0020	Sequence error
Explanation:	A sequencing error has occurred in the specified volume.
System action:	None.
Terminal operator info:	Correct the sequence number specified.

EDT0021	Unsupported language
Explanation:	An unsupported language type has been specified for SET TABS.
System action:	None.
Terminal operator info:	TAB settings are supported for ASSEMBLER, PL/I, COBOL and FORTRAN.

EDT0022	PANVALET not available
Explanation:	The user attempted to edit a PANVALET-controlled member and the PANVALET interface is not installed.
System action:	None.
Terminal operator info:	Contact the system programmer to install the interface.

EDT0023	Library busy, please wait
Explanation:	Another user has the library enqueued, probably to do a save.
System action:	None.
Terminal operator info:	Try again a little later.

EDT0024	Library is read-only
Explanation:	Library has been defined as read-only to security exits and an update operation has been attempted.
System action:	None.
Terminal operator info:	None.

EDT0025	Library not defined
Explanation:	A two-character library access code was used and could not be matched with a data set name in the UEDTB1 or ULIBID tables.
System action:	None.
Terminal operator info:	Use a correct two-character code or the full data set name.

EDT0026	DSORG/Space invalid
Explanation:	The file being edited is not a PDS member or a sequential file. Or the record length of the file is bigger than 255. Only fix(block)ed datasets are supported.
System action:	None.
Terminal operator info:	None.

EDT0027	Not enough storage
Explanation:	This message is associated with the READ, RECOVER, or INSERT commands and indicates that there is insufficient storage for an SD file to be opened.
System action:	None.
Terminal operator info:	Contact the system programmer to recatalog UEDIT with a larger region size.

EDT0028	I/O error on library
Explanation:	Probable hardware error.
System action:	None.
Terminal operator info:	Inform the system programmer.

EDT0029	Library not found
Explanation:	The library accessed by the data set name entered cannot be located in the catalog or specified volume.
System action:	None.
Terminal operator info:	Use the correct data set name and retry.

EDT0030	Aborted by the user
Explanation:	An edit session was terminated by the user, usually by pressing the CLEAR key.
System action:	The edit file is available for later recovery.
Terminal operator info:	If desired, use the RECOVER function from the Full Screen Editor menu to recover the aborted session.

EDT0031	Library/DSN access error
Explanation:	An unexpected error occurred while accessing a library.
System action:	The command is ignored.
Terminal operator info:	If the error persists, contact your Com-plete system programmer.
System programmer info:	Contact Com-plete support.

EDT0032	Library full
Explanation:	An attempt to save a member into a data set was made and, because the library was full, the operation failed.
System action:	The command is ignored and processing continues. The edit file is available for later recovery.
Terminal operator info:	Have the library compressed or reallocated.

EDT0033	PANVALET error, Rc=X'$1'
Explanation:	A non-zero return code was received from the PANVALET program product for the operation attempted.
System action:	The command is ignored and processing continues.
Terminal operator info:	Determine the cause of the error, correct it, and retry the operation.

EDT0034	Directory full
Explanation:	An attempt was made to save a member into a PDS and the directory was full.
System action:	The command is ignored and processing continues. The SD edit file is available for recovery at a later time.
Terminal operator info:	The data set should be compressed or reallocated with additional directory blocks.

EDT0035	Member not found
Explanation:	The member name specified was not found in the library searches.
System action:	The command is ignored and processing continues.
Terminal operator info:	Specify a valid member name for the library specified.

EDT0036	Member already exists
Explanation:	An attempt to create an already existing member was attempted.
System action:	The command is ignored and processing continues.
Terminal operator info:	Either use the EDIT function to edit the existing member, or the CREATE function to create a member that does not already exist.

EDT0037	No member specified
Explanation:	An edit session was attempted without a member name being given.
System action:	The request is ignored and processing continues.
Terminal operator info:	Specify a valid member name.

EDT0038	Number of records in file exceeds the maximum SDfile size
Explanation:	The number of records in the file plus SDSIZE/4 exceeds 32760, the maximum number of records UEDIT can save into it's SDfile.
System programmer info:	Lower Sysparm SDSIZE or use another Editor (e.g. TSO) to work on such big files.
Appl. programmer info:	Use another Editor (e.g. TSO) to work on such big files.

EDT0039	Read aborted by PC
Explanation:	The escape sequence for NATURAL CONNECTION was entered during the READ attempt (upload).
System action:	The command is ignored and processing continues.
Terminal operator info:	None.

EDT0040	Save aborted by PC
Explanation:	The escape sequence for NATURAL CONNECTION was entered during the SAVE attempt (download).
System action:	The command is ignored and processing continues.
Terminal operator info:	None.

EDT0041	0 records read
Explanation:	A READ operation (upload) was performed and the member was found to contain zero records.
System action:	Processing continues normally.
Terminal operator info:	None.

EDT0042	PC I/O error
Explanation:	A physical I/O error has occurred during an upload or download request.
System action:	The upload or download is aborted.
Terminal operator info:	Retry the upload or download operation.

EDT0045	DSN/Library access error
Explanation:	Self-explanatory message.

EDT0047	Invalid record format on upload
Explanation:	Self-explanatory message.

EDT0050	Please enter a valid new name
Explanation:	Self-explanatory message.

EDT0051	Please enter a valid member name
Explanation:	Self-explanatory message.

EDT0052	Please Enter Libid Or DSN
Explanation:	Self-explanatory message.

EDT0053	Please enter Volume Serial No.
Explanation:	Self-explanatory message.

EDT0054	Please Enter Function
Explanation:	Self-explanatory message.

EDT0055	Please Enter Profile Name
Explanation:	Self-explanatory message.

EDT0056	Please Enter Profile Name
Explanation:	Self-explanatory message.

EDT0057	Profile Library Not Defined in system
Explanation:	Self-explanatory message.

EDT0058	Rename Aborted, Newsub Blank
Explanation:	Self-explanatory message.

EDT0059	Rename Aborted, Newtyp Blank
Explanation:	Self-explanatory message.

EDT0060	Member already exists
Explanation:	Self-explanatory message.

EDT0061	Conflicting Level Info
Explanation:	Self-explanatory message.

EDT0062	Invalid Level Number
Explanation:	Self-explanatory message.

EDT0063	Invalid Date
Explanation:	Self-explanatory message.

EDT0064	Invalid Time
Explanation:	Self-explanatory message.

EDT0065	Too many records in input data set
Explanation:	The input data set has more than 32760 records.