ZDM0001 | ZDM0002 | ZDM0003 | ZDM0004 | ZDM0005 | ZDM0006 | ZDM0007 | ZDM0008 | ZDM0009 | ZDM0010 | ZDM0011 | ZDM0012 | ZDM0013 | ZDM0091 | ZDM0092 | ZDM0099| ZDM0001 | COMDMP $1 Error RF = x$2 FDBK = X$3 |
| Explanation: |
This message is associated with the Com-plete dump dataset. On return from VSAM macro $1 an error was detected. $2 contains the returncode, $3 the feedbackcode |
| System action: |
The program is terminated. |
| System programmer info: |
See VSE/VSAM return and error codes. |
| Computer operator info: |
Contact your COM-PLETE system programmer. |
| ZDM0002 | COMDMP Dumpfile successfully initialized |
| Explanation: |
This messages is associated with the Com-plete dump dataset. It indicates, that the dataset was succesfully initialized. |
| System action: |
This is an informational message only. |
| Computer operator info: |
No action required. |
| ZDM0003 | COMDMP Dump will be written to SYSLST |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that during initialization of Com-plete an error was detected at the open of the Com-plete dump dataset COMDMP. Messages ZDM0001 or ZDM0006 are written together with this message. Please look for more information there. |
| System action: |
The initialization continues. But in case of an COM-PLETE abend the dump will be written to SYSLST. |
| System programmer info: |
Contact your COM-PLETE system programmer to correct the error. |
| ZDM0004 | COMDMP Dumpfile sucessfully opened |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that the dumpfile is successfully opened and will be used in case of a Com-plete abend. This message is written together with ZDM0005. |
| Computer operator info: |
This is just an informational message. |
| ZDM0005 | COMDMP Dump will be written to COMDMP |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that the dumpfile was successfully opened and will be used in case of a Com-plete abend. This message is written together with ZDM0004. |
| Terminal operator info: |
This is just an informational message. |
| ZDM0006 | COMDMP Dumpfile too small |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that the dump file COMDMP is to small to contain a Com-plete abend dump. |
| System action: |
In case of a COM-PLETE abend the dump will be written to SYSLST. |
| System programmer info: |
Define the COM-PLETE dataset with a larger extent and initialize the dataset. |
| Computer operator info: |
Contact your COM-PLETE system programmer. |
| ZDM0007 | COMDMP Now dumping $1 |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, which storage area is currently written to the dump dataset during a Com-plete abend. |
| Computer operator info: |
This is just an informational message. |
| ZDM0008 | COMDMP Dump $1 successfully written |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that dump number $1 has been successfully written to the Com-plete dump dataset. |
| Computer operator info: |
This is just an informational message. |
| ZDM0009 | COMDMP Dump $1 not printed - highest record number was never set |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that the dump number $1 will not be printed, because it was not successfully written to the dump dataset. |
| System action: |
The program is terminated. |
| Computer operator info: |
This is just an informational message. |
| ZDM0010 | COMDMP Dump dataset not initialized |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that the dataset was not initialized correctly and can therefore not be used by Com-plete. |
| System action: |
In case of a COM-PLETE abend the dump will be written to SYSLST. |
| System programmer info: |
Initialize the COM-PLETE dump dataset with the utiltity TUDUBTCH (see System Programmer's Manual). |
| Computer operator info: |
Contact your COM-PLETE system programmer. |
| ZDM0011 | COMDMP Not enough Getvis for data |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that there is not enough partition GETVIS to write records to the Com-plete dump dataset. |
| System action: |
In case of a COM-PLETE abend the dump will be written to SYSLST. If this message is issued by a TUDUBTCH, the program is terminated. |
| System programmer info: |
Increase the partition GETVIS area. |
| Computer operator info: |
Contact your COM-PLETE system programmer. |
| ZDM0012 | COMDMP Invalid RBA for GET/PUT : $1 |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that during GET/PUT for COMDMP an invalid RBA was encountered. The RBA is $1. |
| System action: |
In case of a COM-PLETE abend the dump dataset will be closed and the dump written to SYSLST. If this message is issued by TUDUBTCH the program abends with a dump. |
| System programmer info: |
Contact COM-PLETE technical support for problem analysis. |
| Computer operator info: |
Contact your COM-PLETE system programmer. |
| ZDM0013 | COMDMP Recsize/CIsize not correct |
| Explanation: |
This message is associated with the Com-plete dump dataset. It indicates, that the file was not defined with the correct parameters. |
| System action: |
The dump dataset will not be initialized. |
| System programmer info: |
Define the cluster using the correct allocation parameters. (see example JCL in JCLINST8.J on the COM-PLETE source library) |
| Computer operator info: |
Contact your COM-PLETE system programmer. |
| ZDM0091 | TUDUBTCH - Backup/Restore unsuccessful |
| Explanation: |
Self-explanatory message. |
| ZDM0092 | TUDUBTCH - Backup/Restore successful. |
| Explanation: |
Self-explanatory message. |
| ZDM0099 | TUDUBTCH - invalid function |
| Explanation: |
This message is associated with the utility TUDUBTCH. It indicates, that the PARM value on the EXEC card contains an invalid function. |
| System action: |
The utility is terminated. |
| System programmer info: |
See COM-PLETE System Programmer's Manual for allowed functions on the PARM statement. |
| Computer operator info: |
Contact your COM-PLETE system programmer. |