Page File Processing

This message is associated with paging. It indicates that the user program issued a PREAD, PWRT, or PLIMIT function without first opening a page file with the POPEN function.

The user program is abnormally terminated with a Com-plete online dump.

This error was caused by the application program. Seek the assistance of the application programmer responsible for the program in use when the error occurred.

Change the logic of the application program so the page file is opened before it is used.

This message is associated with paging. It indicates that one or more of the following conditions prevented the successful execution of a PREAD or PWRT function:

1. The location specified to contain the page number was not within the area available to the user program.

2. The value specified for the page number was negative.

3. The page number specified did not exist in the page file.

The user program is abnormally terminated with a Com-plete online dump.

This error was caused by the application program. Seek the assistance of the application programmer responsible for the program in use when the error occurred.

Register 1 in the dump contains the location of the parameter list for the PREAD or PWRT functions. The second word in the list contains the location of the page number parameter.

This message is associated with paging. It indicates that one or more of the following conditions prevented the successful execution of a paging function:

1. The location specified to contain the page number was not within the area available to the user program.

2. The value specified for the page length was either greater than the maximum allowable page size or greater than the value specified for the page length when the paging file was opened (for the PWRT, PREAD, and PLIMIT functions only).

The user program is abnormally terminated with a Com-plete online dump.

This error was caused by the application program. Seek the assistance of the application programmer responsible for the program in use when the error occurred.

Register 1 in the dump contains the location of the parameter list for the POPEN, PREAD, OR PWRT function. For the PREAD and PWRT functions, the first word in the list contains the location of the page area. For the POPEN function, the first word in the list contains the location of the length of the page area.

This message is associated with paging. It indicates that one or more of the following conditions prevented the successful execution of the POPEN function:

1. Two parameters were not included in the POPEN function.

2. The location specified to contain the page length and/or number of pages was not within the area available to the user program.

3. The value specified for the page length or number of pages was either negative, zero, or greater than the maximum.

The user program is abnormally terminated with a Com-plete online dump.

This error was caused by the application program. Seek the assistance of the application programmer responsible for the program in use when the error occurred.

R1 contains the location of the POPEN parameter list. The first word in the list contains the location of the page length parameter. The second word in the list contains the location of the number of pages parameter.

This message is associated with paging. It indicates that the size of page file specified in a POPEN function was greater than the free space available in the Com-plete SD dataset.

The user program is abnormally terminated with a Com-plete online dump.

Contact the Com-plete system programmer.

The appearance of this message may be caused by one or both of the following reasons:

1. The application program has tried to create too large a paging file.

2. The Com-plete SD dataset is becoming full.

Check the size of the SD dataset and the percentage of space used. Backup and / or delete some of the older SD files and / or increase the size of the SD dataset.

The size of a page file may be determined by multiplying the length of each pages by the number of pages specified in the POPEN function.

This message is associated with paging. It indicates that there is insufficient main storage available in Com-plete to allocate control blocks and buffers for a paging file.

The user program is abnormally terminated with a Com-plete online dump.

Contact the Com-plete system programmer.

There is insufficient main storage available in the Com-plete region.

Notify the Com-plete system programmer.

This message is associated with paging. It indicates that the user program specified an incorrect number of parameters in paging function.

The user program is abnormally terminated with a Com-plete online dump.

This error was caused by the application program. Seek the assistance of the application programmer responsible for the program in use when the error occurred.

R1 contains the location of the parameter list for the paging function. Refer to the section entitled 'Terminal paging' in the chapter 'Terminal I/O Functions' in the Com-plete Application Programmer's Manual for the correct number and arrangement of parameters.

This message is associated with paging. It indicates that the location specified to contain the page number of the highest page, current page, or most recently displayed page was not within the area available to the user program.

The user program is abnormally terminated with a Com-plete online dump.

This error was caused by the application program. Seek the assistance of the application programmer responsible for the program in use when the error occurred.

R1 contains the location of the parameter list for the PLIMIT function. The first word in the list contains the location of the highest page number parameter. The second word in the list contains the location of the current page number parameter. The third word in the list contains of the most recently displayed page parameter.

This message is associated with paging. It indicates that an application program has executed a page file function and the paging function of Com-plete is not operational.

The user program is abnormally terminated with a Com-plete online dump.

Notify the computer operator and the Com-plete system programmer.

This problem occurs if the Com-plete system has been generated without the page system functions being available for use or if the Com-plete rat system has been modified to ignore page file function requests. For further details, contact Com-plete technical support.

This message is associated with the Terminal paging functions of Com-plete . It indicates that the Com-plete SD dataset is full.

The user program is abnormally terminated wit a Com-plete online dump.

Inform The Com-plete system programmer.

Check the size of the Com-plete SD dataset and the percentage of space in use. Backup if appropriate and delete some of the older SD files and / or increase the size of the SD dataset.

Inform The Com-plete system programmer.

This message is associated with the terminal paging functions of Com-plete . It indicates that one or both of the following conditions exist:

1. An access method error occurred during access to the SD dataset.

2. The paging file control block is in error.

The user program is abnormally terminated with a Com-plete online dump.

Contact the Com-plete system programmer.

If this error persists after Com-plete has been restarted, the SD dataset may de damaged and require reinitialization and restoration from the most recent backup.

This message indicates than a potentially desastrous error has occurred during processing of terminal paging functions of application programs. Com-plete should be terminated and restarted as soon as possible. If the error persists, consult the Com-plete system programmer.

This message is associated with the Com-plete paging task and the UP paging utility program. The terminal operator or program requested a display (on the terminal) of a page from the terminal's page file; however, the paging task determined that the page to be displayed contained more data than the requesting terminal could display.

The requested page is not displayed.

Reexecute the program from a terminal that has the correct capacity for the pages to be displayed. If no such terminal is available, notify the application programmer responsible for the program.

The maximum data capacity is determined by the terminal device type.

This message is associated with the Com-plete paging task and the UP paging utility program. The terminal operator or program requested a display (on the terminal) of a page from the terminal's page file. The requested page was outside the limits of the page file as defined by the application program's POPEN request display.

The requested page is not displayed.

The requested page was not provided by the program. If the page should be present, notify the application programmer responsible for the failing program.

If the page should be present, the page file may be defined as small in the POPEN request. If so, change the POPEN request to establish a larger page file.

This message is associated with the Com-plete paging task and the UP paging utility program. The terminal operator or program requested a display (on the terminal) of a page from the terminal's page file. The requested page was never written (via a PWRT request) by the last application program executed by the terminal.

The requested page is not displayed.

The requested page was not provided by the program. If the page should be present, notify the application programmer responsible for the failing program.

If the page should be present, a program error is responsible. Correct the program.

This message is associated with the Com-plete paging task and the UP paging utility program. The terminal operator or program requested a display (on the terminal) of a page from the terminal's page file. When attempting to read the page, Com-plete encountered a permanent I/O error condition on the disk device containing the page file.

The requested page is not displayed.

Notify the Com-plete system programmer.

This message indicates a serious hardware error on the disk device that contains the SD file (page files are allocated in this area). The appropriate sense/status information is displayed by the I/O supervisor on the system console.