This document covers the following topics:
Code page conversion and Unicode support make use of functionality
provided by International Components for Unicode for Software AG (ICS). If you
want to enable Natural for Unicode and code page support, you have to install
the components provided with ICS: the ICS module SAGICU or an
alternative ICS module
and ICU data
libraries.
Notes:
CFICU and CP are set to OFF.
SYSCP utility.
See Invoking and
Terminating SYSCP in the Utilities
documentation of the Natural for Mainframes documentation.
If you want to enable Natural for Unicode and code page support, you need to link and load an ICU data library during the installation of Natural as described in Installing International Components for Unicode for Software AG for z/OS (see ICS 321).
The ICS module SAGICU is intended to be used independently from localization
data. It contains no statically-linked code pages and locales. A dataset containing the
entirety of the ICU localization data, modulated in data items, is part of the ICS 321
delivery. Its name can be specified by the CFICU STEPLIB parameter or
statically in the JCL as a Natural steplib.
Another feature of this module is collation services. Collation services are used to compare Unicode strings. They consider the fact that the alphabetical order varies from language to language. It is a big challenge to accommodate the world's languages and writing systems and the different orders that are used. However, the ICU collation service provides excellent means for comparing strings in a locale-sensitive fashion. For example, in German locale, the character "Ä" is sorted between "A" and "B"; in Swedish locale, it is sorted after "Z". In Lithuanian, the character "y" is sorted between "i" and "k". The ICU implementation of collation services is compliant to the Unicode Collation Algorithm and conforms to ISO 14651. The algorithms have been designed and reviewed by experts in multi-lingual collation, and are therefore robust and comprehensive.
Statically-linked collation data (set of code pages and locale IDs) is not supported with ICS 321.
ICS 321 uses all of the ICU localization data.
The ICS module SAGICU provides the following code
pages and locales:
| Code Pages | Locales |
|---|---|
|
IBM037 |
de_DE |
If your Natural system runs on z/OS with an IBM processor with
architecture level 9 or higher, you can replace the ICS module
SAGICU by SAGICUA9. SAGICUA9 is built to
use advanced machine instructions introduced with IBM's ESA/390 and
z/Architecture. You can use the system command
TECH
(see the System Commands documentation) to find out the
architecture level supported on your current machine.
SAGICUA9 improves the execution performance, especially
for Natural statements that use Unicode variables or code-page encoding
instructions (for example, MOVE ENCODED). For more information on
architecture levels, refer to the related documentation from IBM
(z/Architecture, Principles of Operation).
 |
Warning: An operation exception error (abend code S0C1) can occur if the ICS module SAGICUA9 is used, but the underlying machine
architecture level is lower than 9. |
If you want to enable Natural for Unicode and code page support, you need to link and load an ICU data library during the installation of Natural as described in Installing International Components for Unicode for Software AG for z/OS.
ICU data libraries are supplied with the following ICS data modules
where nn denotes the current version of
the module as announced in the current Natural Release
Notes for Mainframes.
| Data Module | Description |
|---|---|
ICSDTnnE |
Contains the most popular code pages and
locales. The code pages are already declared in
NATCONFG.
|
ICSDTnnJ |
Same as
ICSDTnnE, but enhanced by Japanese code
pages. ICSDTnnJ is already linked to
the ICS module SAGICU (or an
alternative ICS module).
It contains the above mentioned code pages and locales.
|
ICSDTnnX |
Contains all possible converters and
locales offered by the currently supported ICU version. It supports about 230
different code pages (predominantly EBCDIC code pages) and 238 locales.
Therefore, the module size is huge.
|
The ICU data items supported by Natural include converters and
collators. For example: a converter is used when a MOVE ENCODED
statement executes, and a collator when strings are compared in an
IF statement.
An ICU data item is either statically linked to an ICU data library or it is dynamically loaded on request during the Natural session.
ICU data items are supplied as loadable modules on the ICS data set supplied for installation of Natural, and must be accessible through the Natural steplib chain.
When a data item is used for the first time, ICS attempts to open it from the linked or loaded ICU data library. If no data item is associated with a library, ICS attempts to dynamically load the data item from the ICS data set.
This section covers the following topics:
The name of a data item module in the ICS data set is restricted to eight characters. As indicated in the table below, it consists of the following:
A prefix (I),
A two-digit ICU version
(xx),
A logical group identifier (C, B,
S, L, M or D), and
A four-digit sequence number
(nnnn).
| Module Name | Contents |
|---|---|
IxxCnnnn |
Charset mapping tables (converter modules) |
IxxBnnnn |
Break iterators |
IxxSnnnn |
Collators (collation services) |
IxxLnnnn |
Localization (formatting, display names and other localized data) |
IxxMnnnn |
Miscellaneous data (rule-based number formats and transliterators) |
IxxDnnnn |
Base data |
Example:
I58C0074 is the name
of a converter for ICU Version 58.2 and code
page ibm-1148_P100-1997.
However, in a MOVE ENCODED statement, Natural expects
the long name of the code page that corresponds to the data item module. Any
valid alias name of the code page can be used. The name of the code page is
automatically mapped to the eight-character short name when the data item
module is loaded.
For further information, see the appropriate ICU web site.
Using dynamically loaded single data item modules allows for extensive flexibility. Data is loaded on demand and supports all code pages. A dataset containing all of the ICU localization data, modulated in single data items, is part of the ICS 321 delivery.
A single data item module is loaded when first accessed (e.g. by a
MOVE ENCODED statement) and is available for future use instantly
without the need to reload. Only the already used code pages will be kept in
memory and no statically-linked data or a separate data library as was the case
with previous ICS versions.
If a Natural session is enabled for code page or Unicode support, you should ascertain that Natural's Adabas user session also uses the appropriate user encoding for accessing Adabas data.
Because Adabas uses Entire Conversion Services (ECS) for conversion,
the ECS name must be specified in the related
NTCPAGE
entry in module
NATCONFG.
To ascertain that Natural's Adabas user session uses the correct code page,
specify the ACODE and/or WCODE option in the
OPRB
parameter for the databases used.
For more information on Adabas Unicode and code page support conversion, see the Adabas documentation for mainframes.
Natural uses various tables for character translation and character
property definition. The contents of the tables can be modified via profile
parameters (TAB,
UTAB1,
UTAB2 and
SCTAB)
during the start of a Natural session.
If Natural is running with code page support (that is: the
CP profile
parameter is set to a value other than OFF), the tables cannot be
modified by the user. In this case, the following Natural startup message will
be issued to notify the user that the above mentioned session parameters are
not considered:
Character translation parameter
table-name ignored due to CFICU=ON.
Natural adjusts the tables automatically, according to the code page
used for the Natural session (value of the system variable
*CODEPAGE).
See also Translation
Tables in the Operations
documentation.
Natural supports multi-byte code pages (MBCS) such as IBM-939 which
is a Japanese code page based on EBCDIC and DBCS. Multi-byte code pages can be
selected using the CP parameter (by
setting CP to AUTO (if supported) or to the
name of a code page). If Natural is running with a multi-byte code page, it
uses internal I/O buffers which are based on Unicode. This means that all data
written into the internal I/O buffers by an I/O statement are converted to
Unicode. Due to the requirements of Unicode and multi-byte code pages, the size
of the I/O buffers is increased as compared to the traditional I/O since
Unicode characters need twice as much space as EBCDIC characters and enhanced
attributes are needed to describe a field.
In the case of single-byte code pages (SBCS) such as IBM-1140, the traditional EBCDIC-based I/O is still used to preserve resources.