Installation Verification for Natural Advanced Facilities under CICS on z/OS

You can verify the successful installation of Natural Advanced Facilities by following the instructions provided in this section.


System Testing

You can perform the following steps to determine whether Natural Advanced Facilities functions correctly.

Start of instruction setTo print a test report

  • In the appropriate logical printer, set the Disposition to K for testing.

    Log on to the Natural system library SYSPOOL and execute the programs NTEST and SPPTEST. These programs contain WRITE (1) statements.

    Or:
    Create test reports with Function 42 described in the Natural Advanced Facilities documentation.

Start of instruction setTo proceed if a test report cannot be printed

  1. Check that the CICS printer status is IN SERVICE.

  2. Use the CICS message switching transaction CMSG to route a message to the specified printer:

    CMSG 'message',ROUTE=term-id,SEND

    where term-id is the terminal identification of the CICS printer as specified in the TCT.

  3. If  Natural Security is installed, check whether logon error records (of the NATSPOOL spool server NATP) have been written to the Natural Security system file. The maintenance system for these error records can be invoked by entering ERROR in the command line of Natural Security.

  4. Check that the standard Natural LOGON object has not been replaced. The NATSPOOL spool server NATP must be able to execute the SVPCIC01 module in the SYSPRINT library.

    Also check whether the LOGON user exit causes the LOGON of the spool server to SYSPRINT to terminate.

  5. Check that the catalog dates of the objects in SYSPRINT and SYSPOOL are identical to one another.

  6. Check that the parameters for the spool server match the Natural Advanced Facilities environment. To do so, invoke MENU in the SYSPOOL library and check the CICS Options defined with Function 30.5 (see the Natural Advanced Facilities documentation).

  7. Check that neither the external security (EXTSEC operand of CICS PCT) nor the security levels (TRANSEC operand of CICS PCT) are defined for the spool server NATP. This ensures that NATP can be initiated without security violations.

  8. Check the TCT and VTAM definitions (see Step 10: Define Natural Advanced Facilities for Natural Security, Step 13: Define Natural Advanced Facilities for VTAM/SNA and Step 14: Define Natural Advanced Facilities for VTAM/non-SNA in the section Installing Natural Advanced Facilities under CICS).

  9. Allocate a screen device instead of a printer device to the Destination/Form pairing of the first logical printer, execute NTEST in the SYSPOOL library, and check for error messages on the screen.

    On certain devices, the CICS abend ATNI may occur.

    Since the Natural Security logon processing checks whether the device is a printer, this test is only possible if Natural Security is not installed.

  10. Start the transaction CEDF for your terminal device and check whether the command EXEC CICS START (to start the spool server) is executed.

  11. Start the transaction CEDF for your printer device (CEDF terminal ID of printer) and check which commands are executed.

  12. Check the Natural Advanced Facilities messages on the system operator console and/or in the log file (the destination of messages is defined with Function 30.5 (see the Natural Advanced Facilities documentation).

    Console messages sent by the spool server start with:

    NAF SP-SERV:

    Console messages sent by the terminal task start with:

    NAF-
  13. Obtain a NATSPOOL trace and check which Natural Advanced Facilities modules are called, which Adabas commands are executed, and which return codes are encountered.

NATSPOOL Trace using SYSRDC

Start of instruction setTo obtain an online NATSPOOL trace by using the Natural SYSRDC utility

  1. Start a Natural session with the following dynamic parameters:

    RDCSIZE=100, TRACE=(NATAM08), ITRACE=ON
  2. Log on to the SYSRDC library.

  3. Execute the following command to select the internal trace type:

    RDCSET N
  4. Execute the following command to start the trace:

    RDCSTART
  5. Execute a program which creates a report, for example, NTEST in the SYSPOOL library.

  6. Log on to the SYSRDC library.

  7. Execute the following command to display the trace entries:

    RDCDISP

    You will now see when a NATSPOOL module begins (marked as BEG) and ends (marked as END) as well as its return code in decimal representation.

    After the execution of an Adabas call (marked as ADA), you will see the command code, the first byte of the command ID and the return code in decimal representation.

For detailed information on the SYSRDC utility, see the Utilities documentation.

NATSPOOL Reason Codes

Errors that may occur during the check for printer availability:

Error Description
INV REQU Invalid request
INV ID Invalid ID
INV ADDR Invalid address
INV DEVC Invalid logical device code for page status
ATI REQU ATI required on NON-ATI terminal
RESO PRO Resource problem for inter-partition session
INV PROG Invalid program name
UNAB PER Unable to perform request
INV TYPE Type is not LUC
RESO QUI Resource quiesced by TMP
LOCATERR Any error different from those listed above

Errors that may occur during the start of the spool server:

Error Description
TERMIDER Terminal ID error
TRANIDER Transaction ID error
SYSIDERR SYSID error
INVREQ Invalid request
IOERR I/O error
LENGERR Length error
ISCINVRE ISC invalid request
NOTAUTH Not authorized
STARTERR Any error different from those listed above

NATSPOOL Initialization Console Messages

Messages that may occur during the initialization of NATSPOOL:

Message Text
NAF-01C ADABAS RCxxx, DBIDxxx, FNRxxx, AT OPEN
NAF-02C Not used
NAF-03C ADABAS RCxxx, DBIDxxx, FNRxxx, AT READ REPORT
NAF-04C ADABAS RCxxx, DBIDxxx, FNRxxx, AT READ PRINTER
NAF-05C ADABAS RCxxx, DBIDxxx, FNRxxx, AT CLOSE
NAF-06C ADABAS RCxxx, DBIDxxx, FNRxxx, AT UPDATE REPORT
NAF-07C ADABAS RCxxx, DBIDxxx, FNRxxx, AT UPDATE PRINTER
NAF-08I REPORT xxxxxxxxx, JOBxx.xxx, SET -TO BE PRINTED-
NAF-09I PRINTER xxxx SET -FREE-
NAF-10I PRINTER xxxx RESTARTS IN 20 SECONDS, DEST=xxxxxxxx, FORM=x
NAF-11C RESTART ERROR NAT xxxx ON PRINTER xxxx

NATSPOOL Print Server Messages

See the online help for descriptions of the NATSPOOL print server messages.

Start of instruction setTo invoke online help for print server messages

  1. In the Natural Spool Administration Menu, press PF1.

  2. Enter function code 99 (miscellaneous information).

  3. Enter function code 4 (Natural Advanced Facilities SP-SERV messages from spool server).

NATSPOOL Abend Codes

Abend Code Reason Action
NAF1 - INVALID LENGTH The length of the data to be printed is not positive. Obtain the dump and contact Software AG technical support.
NAF2 - INVALID LENGTH The length of the data to be printed is greater than the maximum length of the terminal I/O buffer (TIOBM). Obtain the dump and contact Software AG technical support.
NAF3 - INVALID RETURN CODE The return code of the task-end routine CMTSKND is not zero. Obtain the dump and contact Software AG technical support.
NAF4 - INVALID RETURN CODE The return code of the print routine CMWTERM is not zero. Obtain the dump and contact Software AG technical support.