Field | Full name | Description |
s | Number of senders | The current number of JMS senders (both static and dynamic) on all JMS connections. |
tx | Sent events | The total number of events emitted to a sender that have been fully processed (either sent to JMS or exhausted the maximum failure retry limit). Includes events sent to dynamic senders that have since been removed, but does not include events sent before the correlator was restarted. |
sRate | Send throughput rate | The total number of events sent per second across all senders, calculated over the interval since the last status line (typically 5 seconds). |
sOutst | Outstanding sent events | The total number of events that have been emitted by EPL but are still queued waiting to be sent to JMS. |
r | Number of receivers | The current number of JMS receivers (both static and dynamic) on all JMS connections. |
rx | Received messages | The total number of messages received from JMS, including messages received but not yet mapped to Apama events and added to the input queue of each public context. Includes events received by dynamic receivers that have now been removed, but does not include events received before the correlator was restarted, nor does it include any JMSReceiverFlowControlMarker events enqueued when the receiverFlowControl is enabled. |
rRate | Received throughput rate | The total number of JMS messages received per second across all receivers, calculated over the interval since the last status line (typically 5 seconds). |
rWindow | Receiver flow control window size | If receiverFlowControl is disabled for all receivers, this has the special value "-1". If any receivers have flow control enabled, rWindow gives a measure of the number of events that can be received before all flow controlled receivers will block, calculated as the sum of all the non-negative receiver window sizes. Note that even if this value is greater than 0 there could still be one or more receivers which have exhausted their own windows and are blocked, so consider enabled logDetailedStatus if per-receiver flow control diagnostics are required. |
rRedel | Redelivered messages | The total number of JMS messages received with the JMSRedelivered flag set to true, indicating they are in-doubt and may have already been delivered in the past. For many JMS providers this flag is not always set reliably/consistently, but it does at least provide an indication of whether redeliveries may be taking place. |
rMaxDeliverySecs | Maximum delivery time | The highest time taken by the JMS broker to deliver a message, based on the difference between the time when each message is received and the value of the JMSTimestamp message header field which indicates the time when it was sent. This is likely to be a low number during normal operation, but will rise during failure modes such as loss of network connectivity or machine crashes as the JMS broker attempts to redeliver messages. This value is useful for understanding the redelivery behavior of the JMS provider in use and for choosing a sensible time expiry window if EXACTLY_ONCE duplicate detection is being used (see dupDetectionExpiryTimeSecs property). A high rMaxDeliverySecs value during testing may indicate that messages remaining on a JMS queue or durable topic from a previous test run may be interfering with the current test run. Note that any difference in the system time on the sending and receiving hosts will add an error to this value, which can result in negative values. |
rDupsDet | Duplicate messages detected | The total number of duplicate messages detected by EXACTLY_ONCE receivers and suppressed because their uniqueMessageId was already present in the duplicate detector. Does not include dynamic receivers that have now been removed. |
rDupIds | Duplicate ids in memory | The total number of uniqueMessageIds being kept in memory for duplicate detection purposes by EXACTLY_ONCE reliable receivers. This is the total of the size of all per-message-source fixed-size expiry queues plus the unbounded time-based expiry queue. If this becomes too large it is possible the correlator could run out of memory. |
connErr | Connection errors | The total number of times a valid JMS connection has gone down. Note that this tracks errors in existing connections and does not include repeated failures to establish a connection. |
jvmUsedMB | JVM used memory | The amount of memory used by the JVM in Megabytes (heap plus non-heap), which can be compared with the maximum memory size provided for the JVM to check how much spare memory there is and ensure that the correlator is not close to running out of memory. This is particularly useful for checking peak memory consumption, such as testing when any EXACTLY_ONCE duplicate detectors are fully populated with the maximum likely number of uniqueMessageIds and any Apama Java (JMON) applications are running in the same correlator are also near the maximum memory they are likely to use. Note that the memory usage figure reported by the JVM includes both live objects and objects waiting to be garbage collected, so inevitably this will go up and down a certain amount as garbage collections occur. |
... | onApplication Initializedindicator | The suffix <waiting for onApplicationInitialized> will be added to the status lines if the EPL application has not yet called jms.onApplicationInitialized() as a reminder that status or JMS message events cannot be passed into the correlator until this action is invoked. |
Field | Full name | Description |
s | Number of senders | The current number of JMS senders (both static and dynamic) on all JMS connections. |
r | Number of receivers | The current number of JMS receivers (both static and dynamic) on all JMS connections |
connErr | Connection errors | The total number of times this JMS connection has gone down, Note that this tracks errors in existing connections and does not include repeated failures to establish a connection. |
sessionsCreated | Send/receive sessions created | The total number of JMS Sessions that have been created during the lifetime of this JMS connection. In normal operation a single session is created for each sender or receiver, but if a connection failure or serious sender/receiver error occurs, a new session will be created, causing this counter to be incremented. Note, this counter is not decremented when the previous session is closed. |
Field | Full name | Description |
tx | Sent events | The number of events that were emitted to this sender and have been fully processed (either sent to JMS, or exhausted the maximum failure retry limit). |
sRate | Send throughput rate | The number of events sent per second to this sender, calculated over the interval since the last status line (typically 5 seconds). |
sOutst | Outstanding sent events | The number of events that have been emitted by EPL but are still queued waiting to be passed to JMS by this sender. |
sMsgErrors | Per-message error count | The number of Apama events that could not be sent to JMS due to some error, typically a mapping failure or destination not found error. See the log file for WARN and ERROR messages that will provide more details. |
Field | Full name | Description |
rx | Received messages | The number of messages received from JMS, including messages received but not yet mapped to Apama events and added to the input queue of each public context. |
rRate | Receive throughput rate | The number of JMS messages received per second by this receiver, calculated over the interval since the last status line (typically 5 seconds). |
rWindow | Flow control window size | If receiverFlowControl is disabled this has the special value "-1". If it is enabled, this gives the current flow control window size, that is the number of successfully mapped events that can still be received before the receiver will block. A zero value indicates that the flow control window has been exhausted and the application should call JMSReceiverFlowControlMarker.updateFlowControlWindow() to unblock the receiver. A negative value indicates that the window has been updated to a negative value, which has the same effect as a window of 0. |
rRedel | Redelivered messages | The number of JMS messages received with the JMSRedelivered flag set to true. |
rMaxDeliverySecs | Maximum delivery time | The highest time taken by the JMS broker to deliver a message to this receiver, based on the difference between the time when each message is received and the value of the JMSTimestamp message header field which indicates the time when it was sent. |
rMsgErrors | Per-message error count | The number of received JMS messages that could not be passed to the Apama application due to some error, typically a mapping failure. See the log file for WARN and ERROR messages that will provide more details. |
rDupsDet | Duplicate messages detected | The number of duplicate messages detected by this EXACTLY_ONCE receiver and suppressed because their uniqueMessageId was already present in this receiver's duplicate detector. Only displayed for EXACTLY_ONCE receivers. |
perSourceDupIds | Per-source duplicate ids in memory | The total number of uniqueMessageIds being kept in memory for duplicate detection purposes by all per-message-source fixed-size expiry queues. Only displayed for EXACTLY_ONCE receivers. |
timExpiryDupIds | Time-based duplicate ids in memory | The total number of uniqueMessageIds being kept in memory for duplicate detection purposes by the unbounded time-based expiry uniqueMessageId queue. |