This document covers the following topics:
Container files are disk files created by Adabas utilities. They are managed by the Adabas nucleus and Adabas utilities. The internal structure of these files is organized and maintained by Adabas, thus permitting the use of very efficient disk usage algorithms.
The data in the container files consists of data blocks with a block size that is defined by the creator of the database. All of the data blocks of each container type are addressed via a so-called relative adabas block number (RABN), which is a 4-byte unsigned integer >0. Therefore an Adabas database can contain up to 232 - 1 blocks of each container type. The term RABN is used not only for the block number, but also for the corresponding block.
The required container files of an Adabas database are called ASSO, DATA and WORK. For some utilities, additional container files called SORT and TEMP are required.
ASSO contains the organizational data of the database and of the files in the database. Examples of the data stored in ASSO are:
a summary of the physical and logical layout of the database.
a list of the used and unused blocks of the database.
a description of the record fields of each file.
lists of descriptor (search key) fields, which are used for non-sequential database search operations.
protection mechanisms for using the Adabas utilities when the database is offline.
Data Storage (also referred to as simply DATA) contains the user data of a database. In order to reduce disk space requirements, Adabas uses a data compression technique. This means that user data is converted into a more compact form before being stored in DATA, thus significantly reducing storage requirements and disk I/O.
The Adabas nucleus uses WORK as a temporary storage area for update log information required for backout transaction and auto restart.
The size of the WORK should be chosen such that the following applies at all times: consider all of the update, delete and store operations performed since the start of the oldest transaction that is currently active - then the size of the WORK should be equal to or greater than
(the size of all old compressed records modified or deleted
+ the size of all new compressed records after modification or insertion
+ the size of all old index values modified or deleted
+ the size of all new index values after modification or insertion)
multiplied by 4.
Note:
Databases with LOB data may imply significantly larger WORK sizes
because the size of the LOB data also has to be taken into account (for updated
records, only the size of the LOB values which are updated). If a database
contains LOB data, a WORK block size of 4KB is recommended.
These are used by some Adabas utilities as temporary storage areas and work areas. In addition to the predefined SORT and TEMP containers, Adabas also uses temporary files created by the nucleus or utilities as work space, these files being deleted after usage. Refer to the section Temporary Working Space for further information.
An Adabas logical extent is a group of consecutive RABNs allocated by the Adabas nucleus or an Adabas utility.
For each file loaded into the database, at least one of each of the following types of Adabas logical extents is allocated to the file:
Data Storage logical extent
(allocated from the Data Storage physical
extent);
Address Converter logical extent
(allocated from the Associator physical
extent);
Normal Index logical extent
(allocated from the Associator physical
extent);
Upper Index logical extent
(allocated from the Associator physical
extent).
Additional logical extents are allocated by the Adabas nucleus or an Adabas utility when additional space is needed as a result of file updating.
The datasets ASSO, DATA, WORK, SORT and TEMP can consist of several extents, i.e. physically separate areas of storage on disk or other secondary storage medium. When a utility references any of these extents, it uses environment variables to do so. The environment variables are called ASSO1, ASSO2 etc. for the ASSO dataset, DATA1, DATA2 etc. for the DATA dataset and so on for WORK, SORT and TEMP. Thus, for example, if a utility requires to access the ASSO dataset which has three extents, the environment variables ASSO1, ASSO2 and ASSO3 must point to these extents.
The search strategy for finding the ASSO, DATA and WORK container extents is as follows:
Check for the environment variables ASSO1, ASSO2 etc. for ASSO, DATA1, DATA2 etc. for DATA and WORK1 for WORK. If such an environment variable exists, it must contain the file name of the corresponding container extent.
Search for the corresponding entries in the DBnnn.INI file. If such an entry exists, it must contain the file name of the container extent. Refer to the Adabas Extended Operation documentation for further information about the DBnnn.INI files.
Search for the file CONTx.nnn in the database directory (Linux: $ADADATADIR/dbnnn, Windows: %ADADATADIR%\dbnnn), where CONT is ASSO, DATA or WORK, x is the extent number and nnn is the 3 digit database ID.
The search stategy for using SORT and TEMP is described in the section Temporary Working Space
The maximum number of ASSO extents is given by (ASSO1 blocksize - 2) / 12. The maximum the number of DATA extents is given by (ASSO1 blocksize*3 - 2) / 12. These values can, however, be reduced under the circumstances described below.
The total number of ASSO and DATA extents cannot exceed 2721. This maximum number reduces by 1 each time any two adjacent DATA extents have a different block size. So the formula is:
ASSO Extents + DATA Extents + (number of different adjacent DATA block sizes) <= 2721.
Thus, for example, you could have a database where there is only 1 ASSO extent and 1360 DATA extents where no two adjacent DATA extents have the same block size, giving a total of 1 ASSO extent + 1360 DATA extents + 1359 changes of DATA block size= 2720.
The following table gives some examples of the correspondence between the size of the container file ASSO1 and the number of ASSO and DATA extents allowed. The entries in the column "best case" show the maximum number of DATA extents allowed if all of the DATA extents have the same block size. The entries in the column "worst case" show the maximum number of DATA extents allowed if no two adjacent DATA extents have the same block size.
ASSO1 blocksize max. number of max number of DATA extents
ASSO extents best case worst case
-----------------------------------------------------------------------
2 KB (2048 bytes) 170 511 511
3 KB (3072 bytes) 255 767 767
4 KB (4096 bytes) 341 1023 1023
5 KB (5120 bytes) 426 1279 1148
6 KB (6144 bytes) 511 1535 1105
7 KB (7168 bytes) 597 1971 1062
8 KB (8192 bytes) 682 2047 1020
SORT can have up to 50 extents: SORT1, SORT2, ... ,SORT50
WORK can have only 1 extent: WORK1.
TEMP can have up to 10 extents: TEMP1, TEMP2, ... ,TEMP10.
If a database becomes full, Adabas is able to auto expand the database containers ASSO and DATA. The prerequsite for this is that the nucleus parameter OPTIONS=AUTO_EXPAND has been specified. The strategy used to allocate new space is as follows:
Try to increase the last extent of the container that requires new space. This is only possible if the extent has the same block size as required for the new space in the container.
Check whether there is an environment variable for the next container extent. If the environment variable exists, it must contain the file name for the next extent, and the specified location must have enough space available for the new container extent.
Check whether the DBnnn.INI files contain entries in the section RESERVED_LOCATIONS. If they do, try to allocate the new container extent in one of the specified locations. Refer to the Adabas Extended Operations documentation for further information about the DBnnn.INI files. The file name for the new container extent will be CONTx.nnn, where CONT is ASSO or DATA, x is the extent number and nnn is the 3 digit database ID.
Try to allocate the new container extent in the database directory (Linux: $ADADATADIR/dbnnn, Windows: %ADADATADIR%\dbnnn),. The file name for the new container extent will be CONTx.nnn, where CONT is ASSO or DATA, x is the extent number and nnn is the 3 digit database ID.
Notes:
When Adabas creates index blocks, it allocates blocks with a block size that depends on the descriptor value sizes:
Large descriptor values >253 bytes are stored in large index blocks with a block size >= 16 KB.
Smaller descriptor values are stored in small index blocks with a block size < 16 KB.
If you want to store large descriptor value, you must, therefore, define an ASSO container with a large block size for the database.
It is recommended that the SORT data set does not reside on the same volume as Associator and DATA. When processing a file which contains more than 100 000 records, the SORT area should be split across two volumes to minimize disk arm movement.
The SORT data set may be omitted when processing only small amounts of data (e.g. when inverting a field in an empty file). The Adabas utility being used then performs an in-core sort.
The SORT data set must be large enough to sort the largest descriptor to be processed. Check the ADACMP or ADAULD log for a list of descriptors, as well as a recommended size of SORT and TEMP for any future data compression or decompression operations.
The ADAINV SUMMARY function also displays the required SORT and LWP size for a memory-resident sort.
Note:
If you want to force ADAINV to do a memory-resident sort, do not
specify a SORT data set, since otherwise ADAINV might do a file-based sort for
the first descriptor, even if the LWP parameter is large enough for a
memory-resident sort. This is because ADAINV does not know in advance the size
of the descriptor. The subsequent descriptors will always be processed in
memory if possible.
It is recommended that the TEMP data set does not reside on the same volume as DATA and SORT.
The TEMP data set is used for intermediate storage of descriptor values if more than one descriptor is inverted.
Although the size of TEMP is closely related to the performance when loading the Normal/Main Index, successful execution does not depend on a given size or the presence of a TEMP. It is recommended that the TEMP data set should be at least large enough to store the second largest descriptor. If you increase the size of the TEMP data set, the number of passes (i.e. the number of times the DATA area of the processed file is read) can be reduced. The ADAINV/ADAMUP SUMMARY function displays the recommended sizes for the TEMP data set.
You can create the Adabas container files only in a file system.
The following points should be considered:
For the best performance, it is recommended that you use the ADANUC parameter UNBUFFERED.
Adabas containers can be created on local disks or on remote storage servers.
If you use disks on storage servers, the I/O speed may be limited by the speed of the network between your computer where Adabas is running and the storage server; this may decrease the overall performance of Adabas.
Some file systems that support snapshots of the file system do not overwrite updated blocks, but write a copy to a different location. If there are a lot of updates to the database, the resulting fragmentation of the data may lead to a very poor I/O performance. Software AG recommends that you ask the storage-system vendor if this can happen with his storage system, and what can be done to avoid these problems.
If the buffer pool is large enough (ADANUC parameter LBP), I/O performance is normally not critical; this is because most logical I/Os do not require a physical I/O. However, the performance of the devices that contain WORK and PLOG (Adabas protection log) is important, since WORK and PLOG contain log information that is required to guarantee database integrity. For this reason, an ET (end of transaction) command can only be completed when the log information is safely stored on the WORK and PLOG devices. Software AG therefore recommends the use of very fast storage devices if you have a high update load; we have seen performance improvements of up to 30% in cases where the normal storage device was replaced by a faster one for WORK and PLOG. Of course, the performance improvement depends very much on the mix of Adabas commands issued and the speed difference between the different storage devices.