This document describes various mainframe and open system SSL scenarios using Encryption for Entire Net-Work.
The following information is supplied for each mainframe scenario described in this section:
The client-side alterations you need to make to your database entries in either your Directory Server definitions or the Entire Net-Work Client definitions in the System Management Hub, as well as what parameters you must specify on those entries. For more information about these definitions, read Access and Connection Definition Setup.
The server-side data sets that must be defined in the Entire Net-Work startup JCL as well as the SSL DRIVER statement parameters that are expected.
The scenarios that are described are:
To perform simple encryption from a client:
Change the communication protocol type to "SSL". For example, suppose the existing entry specified this:
TCPIP://ahost:9734
In this example, you would change the entry to look like this:
SSL://ahost:9734
This update can be made using the System Management Hub in either your Directory Server definitions or the Entire Net-Work Client definition. For more information, read Access and Connection Definition Setup.
To perform simple encryption from a server:
Make sure the data sets and members defined by the following symbolic names are supplied in the Entire Net-Work startup JCL:
NETPC
NETPK
NETRND
For more information about each of these data sets, read Step 6. Alter the Entire Net-Work Startup JCL in Mainframe Activation.
Specify the SSL DRIVER statement in the Entire Net-Work startup JCL. For more information, about the SSL/SSLI DRIVER statement, read SSL/SSLI DRIVER Statement.
To perform client and server authentication from a
client:
Change the communication protocol type to "SSL" and specify values for the CAFILE, CAPATH, CERT_FILE, CERT_PSSWD, KEY_FILE, and VERIFY parameters. For example, suppose the existing entry specified this:
TCPIP://ahost:9734
In this example, you might change the entry to look like this:
SSL://ahost:9734?CAFILE=cacert.pem&CAPATH=path&VERIFY=1&CERT_FILE=testcert.pem&KEY_FILE=testkey.pem&CERT_PSSWD=testing
This update can be made using the System Management Hub in either your Directory Server definitions or the Entire Net-Work Client definition. For more information, read Access and Connection Definition Setup.
To perform client and server authentication from a
server:
Make sure the data sets and members defined by the following symbolic names are supplied in the Entire Net-Work startup JCL:
NETCAF
NETPC
NETPK
NETPSW
NETRND
For more information about each of these data sets, read Step 6. Alter the Entire Net-Work Startup JCL in Mainframe Activation.
To perform simple encryption between Entire Net-Work 7 (open systems)
and Entire Net-Work on the mainframe:
Change the communication protocol type to "SSL" and specify values for the CAFILE, CAPATH, CERT_FILE, CERT_PSSWD, KEY_FILE, and VERIFY parameters. For example, suppose the existing entry specified this:
TCPIP://USZHOST:9734?retry=32767&retryint=60&reconnect=yes
In this example, you might change the entry to look like this:
SSL://USZHOST:9734?retry=32767&retryint=60&reconnect=yes
This update can be made using the System Management Hub in either your Directory Server definitions or the Entire Net-Work Client definition. For more information, read Access and Connection Definition Setup.
For each open systems scenario described in this section, the client-side alterations you need to make to your Kernel and Entire Net-Work Client access and connection definitions are given.
The scenarios that are described are:
To perform simple encryption for an Entire Net-Work Client:
Access the Entire Net-Work Client access definition to Adabas databases in the System Management Hub. For more information, read Maintaining Adabas Access Definitions, in the Entire Net-Work Client Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Save the definition.
To perform simple encryption for a Kernel connection:
Access the Kernel connection definition in the System Management Hub. For more information, read Maintaining Connection Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Save the definition.
To perform simple encryption for an Entire Net-Work Server:
Access the Entire Net-Work Server Kernel access definitions in the System Management Hub. For more information, read Adding Kernel Definitions and Maintaining Access Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
For each Kernel definition that needs to support SSL, verify that either the E-business SSL Access or E-business SSL Client Access option is selected and that appropriate port numbers are specified.
For both E-business SSL Access and E-business SSL Client Access, specify valid values for the SSL CERT_FILE, KEY_FILE, and CERT_PSSWD parameters in the Additional Parameters field. In the following example, xxcert.pem is the certificate file, xxkey.pem is the certificate key file, and "pempswd" is the Public Encryption Method (PEM) password:
&CERT_FILE=xxcert.pem&CERT_PSSWD=pempswd&KEY_FILE=xxkey.pem
Save the definition.
To perform client-only authentication for an Entire Net-Work Client:
Access the Entire Net-Work Client access definition to Adabas databases in the System Management Hub. For more information, read Maintaining Adabas Access Definitions, in the Entire Net-Work Client Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Specify values for the CERT_FILE, KEY_FILE, and CERT_PSSWD parameters in the Additional Parameters field. For example:
&CERT_FILE=testcert.pem&KEY_FILE=testkey.pem&CERT_PSSWD=pempswd
Save the definition.
To perform client-only authentication for a Kernel
connection:
Access the Kernel connection definition in the System Management Hub. For more information, read Maintaining Connection Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Specify values for the CERT_FILE, KEY_FILE, and CERT_PSSWD parameters in the Additional Parameters field. For example:
&CERT_FILE=testcert.pem&KEY_FILE=testkey.pem&CERT_PSSWD=pempswd
Save the definition.
To perform client-only authentication for an Entire Net-Work Server:
Access the Entire Net-Work Server Kernel access definitions in the System Management Hub. For more information, read Adding Kernel Definitions and Maintaining Access Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
For each Kernel definition that needs to support SSL client-only authentication, verify that the E-business SSL Client Access option is selected and that an appropriate port number is specified.
For E-business SSL Client Access, specify valid values for the CAFILE, CAPATH, CERT_FILE, KEY_FILE, CERT_PSSWD, and VERIFY parameters in the Additional Parameters field. The VERIFY parameter must be set to "3" for client authentication.
Save the definition.
To perform server-only authentication for an Entire Net-Work Client:
Access the Entire Net-Work Client access definition to Adabas databases in the System Management Hub. For more information, read Maintaining Adabas Access Definitions, in the Entire Net-Work Client Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Specify values for the CAFILE, CAPATH, and VERIFY parameters in the Additional Parameters field. For example:
&CAFILE=cacert.pem&CAPATH=path&VERIFY=1
Save the definition.
To perform server-only authentication for a Kernel
connection:
Access the Kernel connection definition in the System Management Hub. For more information, read Maintaining Connection Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Specify values for the CAFILE, CAPATH, and VERIFY parameters in the Additional Parameters field. For example:
&CAFILE=cacert.pem&CAPATH=path&VERIFY=1
Save the definition.
To perform server-only authentication for an Entire Net-Work Server:
Access the Entire Net-Work Server Kernel access definitions in the System Management Hub. For more information, read Adding Kernel Definitions and Maintaining Access Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
For each Kernel definition that needs to support SSL server-only authentication, verify that the E-business SSL Access option is selected and that an appropriate port number is specified.
For E-business SSL Access, specify valid values for the CERT_FILE, KEY_FILE, and CERT_PSSWD parameters in the Additional Parameters field. In the following example, xxcert.pem is the certificate file, xxkey.pem is the certificate key file, and "pempswd" is the Public Encryption Method (PEM) password:
&CERT_FILE=xxcert.pem&CERT_PSSWD=pempswd&KEY_FILE=xxkey.pem
Save the definition.
To perform client and server authentication for an
Entire Net-Work Client:
Access the Entire Net-Work Client access definition to Adabas databases in the System Management Hub. For more information, read Maintaining Adabas Access Definitions, in the Entire Net-Work Client Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Specify values for the CAFILE, CAPATH, CERT_FILE, KEY_FILE, CERT_PSSWD, and VERIFY parameters in the Additional Parameters field. For example:
&CAFILE=cacert.pem&CAPATH=path&CERT_FILE=xxcert.pem&KEY_FILE=xxkey.pem&CERT_PSSWD=pempswd&VERIFY=1
&CERT_FILE=testcert.pem&KEY_FILE=testkey.pem&CERT_PSSWD=pempswd
Save the definition.
To perform client and server authentication for a Kernel
connection:
Access the Kernel connection definition in the System Management Hub. For more information, read Maintaining Connection Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
Change the communication protocol type to "SSL" by selecting the SSL or SSL Protocol radio button in the definition.
Specify values for the CAFILE, CAPATH, CERT_FILE, KEY_FILE, CERT_PSSWD, and VERIFY parameters in the Additional Parameters field. For example:
&CAFILE=cacert.pem&CAPATH=path&CERT_FILE=xxcert.pem&KEY_FILE=xxkey.pem&CERT_PSSWD=pempswd&VERIFY=1
Save the definition.
To perform client and server authentication for an
Entire Net-Work Server:
Access the Entire Net-Work Server Kernel access definitions in the System Management Hub. For more information, read Adding Kernel Definitions and Maintaining Access Definitions, in the Entire Net-Work Server LUW Installation and Administration Guide.
For each Kernel definition that needs to support SSL client and server authentication, verify that either the E-business SSL Access or E-business SSL Client Access option is selected and that appropriate port numbers are specified.
For E-business SSL Access, specify valid values for the CERT_FILE, KEY_FILE, and CERT_PSSWD parameters in the Additional Parameters field. In the following example, xxcert.pem is the certificate file, xxkey.pem is the certificate key file, and "pempswd" is the Public Encryption Method (PEM) password:
&CERT_FILE=xxcert.pem&CERT_PSSWD=pempswd&KEY_FILE=xxkey.pem
For E-business SSL Client Access, specify valid values for the CAFILE, CAPATH, CERT_FILE, KEY_FILE, CERT_PSSWD, and VERIFY parameters in the Additional Parameters field. The VERIFY parameter must be set to "3" for client authentication.
Save the definition.
To perform client or server authentication from a client or a
server when the certificates and certificate authorities are not in the current
directory:
Complete the authentication steps described in other scenarios in this section, but specify the path to the certificate authority and certificate files in the CAFILE, CERT_FILE, and KEY_FILE parameters.
Note:
If parameter CAFILE includes path information, the
value of CAPATH should be ".".
To perform client or server authentication from a client or a
server without specifying the Public Encryption Method password directly in the
target entries:
Complete the authentication steps described in other scenarios in this section, but specify the fully-qualified file name of a file that contains the password in the CERT_PSSWD parameter. For example:
&CAFILE=cacert.pem&CAPATH=path&CERT_FILE=xxcert.pem&KEY_FILE=xxkey.pem&CERT_PSSWD=FILE://C:/certs/certpswd.txt&VERIFY=3