The following table lists CONNX system requirements, including hardware requirements, for applicable databases and their operating systems.
CONNX Client |
|
Windows |
|
Hardware |
N/A |
Network |
TCP/IP |
Operating System |
Windows XP SP2 and above |
Memory |
512 MB |
Disk Space |
500 MB |
|
|
IBM Mainframe |
|
Hardware |
FTP server required for installation only. VSE also requires CICS-TS. |
Network |
VSE only: CSI TCP/IP (OE stack); Barnard TCP/IP connectivity stack available |
Operating System |
OS/390, z/OS, and VSE |
Memory |
|
Disk Space |
|
|
|
HP-UX |
|
Hardware |
Processor: PA-RISC and Itanium, 512 MB Disk space: Installing the optimized version of Adabas requires approximately 45MB. An additional 30 MB are required if a demo database is created during installation. An additional 60 MB are required if you install the trace version of Adabas. These figures do not include disk space requirements for other databases that you will create. |
Software |
HP-UX 11.0 (64-bit) or HP-UX V11.11i (64-bit) or HP-UX 11.11 (32-bit) |
|
|
Solaris |
|
Hardware |
Processor: UltraSPARC Memory: 512 MB Disk space: Installing the optimized version of Adabas requires approximately 45MB. An additional 30 MB are required if a demo database is created during installation. An additional 60 MB are required if you install the trace version of Adabas. These figures do not include disk space requirements for other databases that you will create. |
Software |
Operating System: Solaris Version 7 or above |
|
|
AIX |
|
Hardware |
Processor: IBM e-Server P-Series or RS/6000 Memory: 512 MB Disk space: Installing the optimized version of Adabas requires approximately 45MB. An additional 30 MB are required if a demo database is created during installation. An additional 60 MB are required if you install the trace version of Adabas. These figures do not include disk space requirements for other databases that you will create. |
Software |
Operating System: IBM AIX5L Version 5.1 system maintenance level 2 (64-bit) or Version 5.2 |
|
|
Linux |
|
Hardware |
Processor: Intel, IBM Mainframe Memory: 512 MB Disk space: Installing the optimized version of Adabas requires approximately 45MB. An additional 30 MB are required if a demo database is created during installation. An additional 60 MB are required if you install the trace version of Adabas. These figures do not include disk space requirements for other databases that you will create. |
Software |
Operating System: Linux kernel 2.6.18 or above for Intel and zLinux platforms |
RMS (any version) |
|
Hardware |
Compaq VAX Server, Compaq AlphaServer, Itanium |
Network |
TCP/IP |
Operating System |
OpenVMS |
Memory |
12 MB VAX, 32 MB Alpha |
Disk Space |
20,000 blocks available (10 MB) |
|
|
Codasyl DBMS |
|
Hardware |
Compaq VAX Server, Compaq Alpha Server, Itanium |
Network |
TCP/IP |
Operating System |
OpenVMS |
Memory |
12 MB VAX, 32 MB Alpha |
Disk Space |
20,000 blocks available (10 MB) |
|
|
Oracle Rdb |
|
Hardware |
Compaq VAX Server, Compaq Alpha Server, Itanium |
Network |
TCP/IP |
Operating System |
OpenVMS |
Memory |
12 MB VAX, 32 MB Alpha |
Disk Space |
20,000 blocks available (10 MB) |
|
|
Oracle version 8i and above |
|
Hardware |
Compaq VMS Server (VAX, Alpha or Itanium), Personal Computer (Intel)/Alpha Sun/UNIX Workstation |
Network |
TCP/IP, SQLNet 2.x |
Software |
CONNX Requires the Oracle Client Interface Software (OCI) to be installed. This can be the standard Oracle Client, or the Oracle Instant Client. OCI supports Bulk operations only when the version of the Oracle Client matches the version of the Oracle database. This is an important performance consideration with DataSync and Event Replication. For best performance, ensure that the version of the Oracle client is the same as the Oracle database being accessed. On Linux/Unix, CONNX contains an embedded OCI, and no additional software is required. |
Operating System |
OpenVMS (any version), Windows XP SP2 and above, UNIX/Linux (any version) |
Memory |
N/A |
Disk Space |
N/A |
|
|
DataFlex version 2.3 and above |
|
Hardware |
Personal Computer (Intel)/Alpha, UNIX Workstation |
Network |
Any file-sharing protocol |
Operating System |
Windows XP SP2 and above, Novell Netware, or Linux |
Memory |
N/A |
Disk Space |
40MB (Linux) |
|
|
POWERflex |
|
Hardware |
Personal Computer (Intel)/Alpha, UNIX Workstation |
Network |
Any file-sharing protocol |
Operating System |
Windows XP SP2 and above, Novell Netware, or Linux |
Memory |
N/A |
Disk Space |
40MB (Linux) |
|
|
OLE DB Providers (Sybase Informix, Microsoft SQL Server, Microsoft Access) |
|
Operating System |
Windows XP SP2 and above, MDAC 1.5 or later (See Notes below.) |
|
|
ODBC Providers (Must support ADO and be fully ODBC Level 2 compliant.) |
|
Operating System |
Windows XP SP2 and above, MDAC 1.5 or later (See Notes below.) |
|
|
C-ISAM |
|
Hardware |
HPUX, SCO, Solaris, AIX, Linux, Personal Computer (Intel) |
Network |
TCP/IP |
Operating System |
HPUX 10.2+, HPUX64, SUN OS 5.6, SUN OS 5.7+, SCO Openserver release 5, AIX 4.3+, AIX 4.2, Linux 7.2 and 9, or Tru 64 (UNIX). Windows XP SP2 and above. |
Memory |
N/A |
Disk Space |
40 MB |
|
|
DISAM |
|
Hardware |
HPUX, SCO, Solaris, AIX, Linux, Personal Computer (Intel) |
Network |
TCP/IP |
Operating System |
HPUX 10.2+, HPUX64, SCO Server, SUN OS 5.7+, AIX 4.3+, AIX 4.2, Linux, or Tru 64 (UNIX) Windows XP SP2 and above |
Memory |
N/A |
Disk Space |
40 MB |
|
|
Micro Focus 2.2 |
|
Hardware |
HPUX, Solaris, AIX, Linux(Intel), Personal Computer (Intel) |
Network |
TCP/IP |
Operating System |
HPUX 10.2+, AIX 4.3+, AIX 4.2, Linux, or Tru 64 (UNIX), Solaris 5.8 or 5.9 with Micro Focus Server Express 4.0 SP1 only z/OS and OS/390 Windows XP SP2 and above |
Memory |
N/A |
Disk Space |
40 MB |
|
|
Adabas |
|
Hardware |
HPUX, Solaris, AIX, Linux(Intel and zLinux), z/OS, VSE, Personal Computer (Intel) |
Network |
TCP/IP |
Operating System |
HPUX 10.2+, AIX 4.3+, AIX 4.2, Linux, Linux/390, Solaris 5.8 or 5.9 OS/390 and z/OS VSE 2.4 and above Windows XP SP2 and above |
Memory |
N/A |
Disk Space |
40 MB |
DB2 Product |
Operating System |
Network |
DB2/6000; DB2 UDB for AIX |
AIX 4.3 and above |
TCP/IP and SNA/LU 6.2 |
DB2/MVS V4R1 and above; |
MVS |
SNA/LU 6.2 only |
DB2 UDB for z/OS and OS/390 |
z/OS and OS/390 |
TCP/IP and SNA/LU 6.2 |
DB2/400 V3R1 and above |
OS/400 |
SNA/LU 6.2 only |
DB2/400 V4R2 and above; DB2 UDB for iSeries |
OS/400 and iSeries |
TCP/IP and SNA/LU 6.2 |
DB2 UDB Enterprise Server Edition |
Windows XP SP2 and above |
TCP/IP and SNA/LU 6.2 |
DB2 UDB for Linux Enterprise Server Edition |
Linux |
TCP/IP |
VSAM Product |
Operating System |
Supported File Types |
Network Software |
CICS Version/Release |
CONNX for CICS/VSAM |
OS/390 and z/OS |
VSAM |
TCP/IP V3R2 and above |
V4R1 or TX 1.x and above |
CONNX for VSAM / QSAM / PDS |
OS/390 and z/OS |
VSAM / QSAM / PDS |
TCP/IP V3R2 and above |
N/A |
CONNX for CICS/VSAM |
VSE 2.3 and below |
VSAM |
TCP/IP (CSI / IBM) or Barnard TCP/IP stack |
V2R3 and below |
CONNX for CICS/VSAM |
VSE 2.4 and above |
VSAM |
TCP/IP (CSI / IBM) or Barnard TCP/IP stack |
TS 1.1.1 and above |
IMS Product |
Operating System |
Supported File Types |
Network Software |
CICS Version/Release |
CONNX for IMS |
z/OS |
IMS |
TCP/IP V3R2 and above |
N/A |
CONNX has been tested or certified with the following TCP/IP software products on OpenVMS: UCX 3.0 and above, Multinet and TCPware.
OLE DB/ODBC providers use third-party data providers which have their own hardware and network requirements and are installed on the client machine.
The server requirements are dictated by the third-party driver selected for operation.