This document describes the installation tape. It covers the following topics:
This section describes the data sets that are delivered with the Event Replicator for Adabas. In all data set names, vrs represents the version, release, and maintenance level numbers of the release of the Event Replicator for Adabas.
The following data sets are delivered with the Event Replicator for Adabas on z/OS platforms:
| Data Set Name | Contains |
|---|---|
| ARFvrs.INPL | INPL of the online application |
| ARFvrs.JOBS | Sample JCL |
| ARFvrs.LOAD | Load modules |
| ARFvrs.MTSI | Sample input to ADAMTS |
| ARFvrs.SRCE | Sample source members |
| ARFvrs.ZAPS | Zaps for support of the Event Replicator for Adabas |
The following data sets are delivered with the Event Replicator for Adabas on BS2000 platforms:
| Data Set Name | Contains |
|---|---|
| ARFvrs.INPL | INPL of the online application |
| ARFvrs.MOD | Module library |
| ARFvrs.SRC | Sample JCL and sources |
| ARFvrs.ZAPS | Zaps for support of the Event Replicator for Adabas |
| ARFvrs.JOBS | Example installation jobs |
On z/VSE platforms, the following data sets are delivered with the Event Replicator for Adabas:
| Data Set Name | Contains |
|---|---|
| ARFvrs.INPL | INPL of the online application |
| ARFvrs.LIBR | Objects, phases, sample sources, jobs, and input to ADAMTS |
| ARFvrs.ZAPS | Zaps for support of the Event Replicator for Adabas |
This section describes how to copy the contents of the installation tape in different environments.
Copy the data sets from the supplied installation medium to your disk before you perform the individual installation procedure for each component to be installed.
The way you copy the data sets depends on the installation method and the medium used:
If you use System Maintenance Aid (SMA), refer to the copy job instructions provided in the System Maintenance Aid documentation.
If you are not using SMA and want to copy the data sets from CD-ROM, refer to the README.TXT file on the CD-ROM.
If you are not using SMA and want to copy the data sets from tape, follow the instructions in this section.
This section explains how to copy all data sets from tape to disk.
Modify the following sample job according to your requirements:
//SAGTAPE JOB SAG,CLASS=1,MSGCLASS=X //* --------------------------------- //COPY EXEC PGM=IEBGENER //SYSUT1 DD DSN=COPY.JOB, // DISP=(OLD,PASS), // UNIT=(CASS,,DEFER), // VOL=(,RETAIN,SER=tape-volser), // LABEL=(2,SL) //SYSUT2 DD DSN=hilev.COPY.JOB, // DISP=(NEW,CATLG,DELETE), // UNIT=3390,VOL=SER=disk-volser, // SPACE=(TRK,(1,1),RLSE), // DCB=*.SYSUT1 //SYSPRINT DD SYSOUT=* //SYSIN DD DUMMY //
where:
tape-volser is the VOLSER
of the tape, for example: T12345,
hilev is a valid high-level
qualifier, and
disk-volser is the VOLSER
of the disk.
Execute the job to copy the data set COPY.JOB to your
disk.
Modify hilev.COPY.JOB according
to your requirements:
Set EXPDT to a valid expiration date, for example,
99365.
Set HILEV to a valid high-level qualifier, for example,
USERLIB.
Set LOCATION to a storage location, for example,
STORCLAS=ABC or UNIT=3390,VOL=SER=USR123.
Execute hilev.COPY.JOB to copy
single, multiple, or all data sets to your disk.
Copy the data sets from the supplied installation medium to your disk before you perform the individual installation procedure for each component to be installed.
The way you copy the data sets depends on the installation method and the medium used:
If you use System Maintenance Aid (SMA), refer to the copy job instructions provided in the System Maintenance Aid documentation.
If you are not using SMA and want to copy the data sets from CD-ROM, refer to the README.TXT file on the CD-ROM.
If you are not using SMA and want to copy the data sets from tape, follow the instructions in this section.
This section explains how to copy the data sets .LIBJ,
.LIBR and .LICS (if supplied) from tape to disk. All
other data sets can be installed directly from the tape.
Modify the following sample job according to your requirements:
* $$ JOB JNM=LIBRCAT,CLASS=0, + * $$ DISP=D,LDEST=(*,UID),SYSID=1 * $$ LST CLASS=A,DISP=D // JOB LIBRCAT * ***************************************** * STORE COPYTAPE.JOB IN LIBRARY * ***************************************** // ASSGN SYS004,nnn // MTC REW,SYS004 // MTC FSF,SYS004,4 ASSGN SYSIPT,SYS004 // TLBL IJSYSIN,'COPYTAPE.JOB' // EXEC LIBR,PARM='MSHP; ACC S=lib.sublib' /* // MTC REW,SYS004 ASSGN SYSIPT,FEC /* /& * $$ EOJ
where:
nnn is the tape address,
and
lib.sublib is the library
and sublibrary in which the data set COPYTAPE.JOB is to be
stored.
Execute the job to copy the data set COPYTAPE.JOB to
disk.
COPYTAPE.JOB contains the JCL required to copy the data
sets .LIBJ, .LIBR and .LICS from tape to
disk.
Modify COPYTAPE.JOB according to your requirements and set
the disk space parameters as appropriate.
Execute COPYTAPE.JOB to copy the data sets
.LIBJ, .LIBR and .LICS to your disk.
Copy the files (data sets) from the supplied installation medium to your disk before you perform the individual installation procedure for each component to be installed.
The way you copy the files depends on the installation method and the medium used:
If you use System Maintenance Aid (SMA), refer to the copy job instructions provided in the System Maintenance Aid documentation.
If you are not using SMA and want to copy the files from CD-ROM, refer to the README.TXT file on the CD-ROM.
If you are not using SMA and want to copy the files from tape, follow the instructions in this section.
This section explains how to copy all files from tape to disk.
This step is not necessary if you have already copied the library
SRVvrs.LIB from another Software AG
installation tape. For further information, refer to the element
#READ-ME in this library. The library
SRVvrs.LIB is stored on the tape as a
sequential file named SRVvrs.LIBS
containing LMS commands. The current version
vrs can be obtained from the
Software AG Product Delivery Report.
Execute the following commands to convert
SRVvrs.LIBS into an LMS library:
/IMPORT-FILE SUPPORT=*TAPE(FILE-NAME=SRVvrs.LIBS,- / VOLUME=volser, DEV-TYPE=tape-device) /ADD-FILE-LINK LINK-NAME=EDTSAM, FILE-NAME=SRVvrs.LIBS,- / SUPPORT=*TAPE(FILE-SEQ=3), ACC-METH=*BY-CAT,- / BUF-LEN=*BY-CAT, REC-FORM=*BY-CAT, REC-SIZE=*BY-CAT /START-EDT @READ '/' @SYSTEM 'REMOVE-FILE-LINK EDTSAM' @SYSTEM 'EXPORT-FILE FILE-NAME=SRVvrs.LIBS' @WRITE 'SRVvrs.LIBS' @HALT /ASS-SYSDTA SRVvrs.LIBS /MOD-JOB-SW ON=1 /START-PROG $LMS /MOD-JOB-SW OFF=1 /ASS-SYSDTA *PRIMARY
where:
tape-device is the device
type of the tape, for example, TAPE-C4, and
volser is the VOLSER of the
tape (see the Software AG Product Delivery
Report).
Call the procedure P.COPYTAPE in the library
SRVvrs.LIB to copy the procedure
COPY.PROC to disk:
/CALL-PROCEDURE (SRVvrs.LIB,P.COPYTAPE), - / (VSNT=volser, DEVT=tape-device)
If you use a TAPE-C4 device, you can omit the parameter
DEVT.
Enter the procedure COPY.PROC to copy all product files to
disk:
/ENTER-PROCEDURE COPY.PROC, DEVT=tape-device
If you use a TAPE-C4 device, you can omit the parameter
DEVT.
The result of this procedure is written to the file
L.REPORT.SRV.