ART* - Event Replicator Target Adapter Messages

An Event Replicator Target Adapter has successfully started and is waiting for work.

No action is required for this informational message.

This is an internal error.

Contact your Software AG technical support representative for assistance.

The version of the Event Replicator Target Adapter that is running is given in the message (version).

No action is required for this informational message.

A request has been made to shut down the Event Replicator Target Adapter.

No action is required for this informational message.

A request has been made to shut down the main processing loop of the Event Replicator Target Adapter.

No action is required for this informational message.

An operation message (input-msg) is listed in the text of this message.

No action is required for this informational message.

An invalid or unprocessed message was received. The invalid message (msg) is provided in the text of this message.

Review any previous messages to determine the primary cause of the problem. If the problem persists, contact your Software AG technical support representative for assistance.

An attempt to connect to a defined target failed.

Evaluate the target definition to determine the cause of the problem. If you cannot determine the cause of the problem, contact your Software AG technical support representative for assistance.

The status of the failed operation (status) is provided in the text of this message. This message accompanies other error messages. Possible statuses are "Failed" and "FailedRetry".

Review the other messages that accompany this one to determine the cause of the problem. If you cannot determine the cause of the problem, contact your Software AG technical support representative for assistance.

The message in error (msg) is provided in the text of this message, which accompanies other error messages.

Review the other messages that accompany this one to determine the cause of the problem. If you cannot determine the cause of the problem, contact your Software AG technical support representative for assistance.

The database retry count setting has reached the value of zero (0). No further database retries are attempted and the source is closed.

Restart the database and reopen the source.

The Event Replicator Target Adapter is waiting the number of seconds listed in the message (secs) before attempting to reconnect to the source database. The retry attempt number (number) and the total number of retry attempts defined for the source (total) are also given in the message.

No action is required for this informational message.

The Event Replicator Target Adapter is attempting to reconnect to a source database. The retry attempt number (number) and the total number of retry attempts defined for the source (total) are given in the message.

No action is required for this informational message.

The style sheet (XSLT) or XML document to be used in Event Replicator Target Adapter processing is null or cannot be found. This is an internal error.

Contact your Software AG technical support representative for assistance.

The invalid message was committed because the Commit Unprocessed Message option was set to true. Processing continues.

No action is required for this informational message.

The installation verification procedure (IVP) message was received and processed successfully.

No action is required for this informational message.

The number of requests received is listed in the message (count).

No action is required for this informational message.

An unknown message was received.

Contact your Software AG technical support representative for assistance.

The input message listed in the message text could not be converted from one code page (num1) to another (num2).

Contact your Software AG technical support representative for assistance.

This message accompanies message ARTO108E.

Review all the messages to determine the cause of the problem. If the problem persists, contact your Software AG technical support representative for assistance.

A file could not be written because the directory listed in the message did not exist.

Create the directory and restart the Event Replicator Target Adapter.

An internal error has occurred.

Contact your Software AG technical support representative for assistance.

An attempt to reconnect to the database target was successful.

No action required for this informational message

A Software AG license check occurred for the license shown in the message.

No action required for this informational message

The Event Replicator Target Adapter has started processing an initial-state request. The name of the initial-state definition (isname) is listed in the message.

No action is required for this informational message.

The Event Replicator Target Adapter has completed processing an initial-state request. The name of the initial-state definition (isname) is listed in the message.

No action is required for this informational message.

An invalid initial-state request was rejected. It was not processed.

No action is required for this informational message. However, you might want to review the invalid initial-state request to determine why it was not processed.

A normal Event Replicator Server session has started and a message has been received from it. The Event Replicator Server ID is listed in the message (reptor-id).

No action is required for this informational message.

The Event Replicator Server has restarted after it ended abnormally.

No action is required for this informational message although you might want to review the error messages provided by the Event Replicator Server to determine why it ended abnormally.

A normal Event Replicator Server session has terminated. The Event Replicator Server ID is listed in the message (reptor-id).

No action is required for this informational message.

Replication has been deactivated (stopped).

No action is required for this informational message.

Replication has been reactivated (started).

No action is required for this informational message.

The ADARPL utility has started to resend replicated data from the database protection log (PLOG) to the target RDBMS. For more information, read about the ADARPL utility in your Event Replicator for Adabas documentation.

No action is required for this informational message.

The ADARPL utility has completed resending replicated data from the database protection log (PLOG) to the target RDBMS. For more information, read about the ADARPL utility in your Event Replicator for Adabas documentation.

No action is required for this informational message.

The Event Replicator Server replication definitions have been refreshed via an RPLREFRESH command.

No action is required for this informational message.

A run of the ADALOD UPDATE utility function has started.

No action is required for this informational message.

A run of the ADALOD UPDATE utility function has ended.

No action is required for this informational message.

A run of the ADALOD LOAD utility function has ended.

No action is required for this informational message.

An unknown status message was encountered during Event Replicator Target Adapter processing. The status message is given in the message text.

Contact your Software AG technical support representative for assistance.

An unknown URBS operation was attempted. The type of operation attempted is listed in the message text.

Contact your Software AG technical support representative for assistance.

An invalid database ID or file number was encountered during processing.

Check your GFB/GFFT definition. Contact your Software AG technical support representative for assistance.

An ADALOD message is being received. The data source and target are listed in the message.

No action is required for this informational message.

An unknown message was received during processing.

Contact your Software AG technical support representative for assistance.

An AUT1 message produced by the execution of an Adabas utility is being received.

No action is required for this informational message.

The Event Replicator Target Adapter is testing its database connections.

No action is required for this informational message.

This message is the introductory message for a series of other informational messages about the databases to which the Event Replicator Target Adapter has connections.

No action is required for this informational message.

This message lists the protocol type and port number used by the Event Replicator Target Adapter Tomcat engine.

No action is required for this informational message.

This message lists the default HTTP port number that will be used.

No action is required for this informational message.

The Event Replicator Server is shutting down.

No action is required for this informational message.

The Event Replicator Server shutdown is complete.

No action is required for this informational message.

A test is being performed that connects to the database resource listed in the message (id).

No action is required for this informational message.

Tests on the database have completed.

No action is required for this informational message.

This message is the introductory message for a series of other informational messages about the JMS to which the Event Replicator Target Adapter has connections.

No action is required for this informational message.

Tests on the JMS have completed.

No action is required for this informational message.

This message is the introductory message for a series of other informational messages about feneric targets to which the Event Replicator Target Adapter has connections (for example, a Terracotta cache target).

No action is required for this informational message.

Tests on the generic targets have completed.

No action is required for this informational message.

This message displays information about a webMethods EntireX source used to convey replicated Adabas data to the Event Replicator Target Adapter.

No action is required for this informational message.

A request is being processed to close a webMethods EntireX source used to convey replicated Adabas data to the Event Replicator Target Adapter.

No action is required for this informational message.

A webMethods EntireX source used to convey replicated Adabas data to the Event Replicator Target Adapter is being closed. The current state of the source is displayed in the message.

No action is required for this informational message.

A webMethods EntireX source used to convey replicated Adabas data to the Event Replicator Target Adapter has been closed.

No action is required for this informational message.

The webMethods EntireX unit of work ID was rolled back. This is an internal process.

No action is required for this informational message.

The defined prefetch size for the webMethods EntireX source has been reached. The defined prefetch size is given in the message (size).

No action is required for this informational message. However, you might consider increasing the defined prefetch size. Note that increasing the prefetch size will increase the memory requirements.

An error has occurred during an attempt to send data to a webMethods EntireX source. The error class (class), message code (code) and message text (msg) are given in the message.

Refer to your webMethods EntireX documentation for additional information.

An error has occurred during an attempt to use a webMethods EntireX source. The error class (class), message code (code) and message text (msg) are given in the message.

Refer to your webMethods EntireX documentation for additional information.

An exception occurred during an attempt to use a webMethods EntireX source. The exception information (info) is given in the message.

Contact your Software AG technical support representative for assistance.

An error has occurred during an attempt to receive data from an webMethods EntireX source. The error class (class), message code (code) and message text (msg) are given in the message.

Refer to your webMethods EntireX documentation for additional information.

An error has occurred during an attempt to log into an webMethods EntireX source. The error class (class), service name (service), and message code (msgtxt) are given in the message.

Verify that the correct logon information (user ID, token, and password) is provided in the webMethods EntireX source definition. Correct it as necessary and try again.

An error occurred during an attempt to use the webMethods EntireX source whose ID is listed in the message (id). The cause of the error is also listed in the message (exx-cause).

Contact your Software AG technical support representative for assistance.

An error occurred during an attempt to use a webMethods EntireX source definition. The webMethods EntireX error message (err-msg) is listed in the message.

Contact your Software AG technical support representative for assistance.

An error occurred during an attempt to open the webMethods EntireX trace log file. The file name of the log file is given in the message (fn).

Verify that the correct file name is specified for the webMethods EntireX trace log file in the webMethods EntireX definitions. If it is not, correct the name and try again. If the problem persists, contact your Software AG support representative for assistance.

This message identifies the trace level (lvl) and file name (fn) used by the Event Replicator Target Adapter for webMethods EntireX sources.

No action is required for this informational message.

A webMethods EntireX source received data from replication. The length of time (in microseconds) for the receive operation (count), the length of the data received (length), and the unit of work status of the receive operation (status) are given in the message. Values for the unit of work status are "First", "Middle" or "Last".

No action is required for this informational message.

An error occurred during a commit attempt for the webMethods EntireX source. The error class (class), EntireX message code (code), EntireX UOWID (uowid) and EntireX message text (msg) are listed in the message.

Contact your Software AG technical support representative for assistance.

An error occurred during a rollback attempt for the webMethods EntireX source. The error class (class), EntireX message code (code) and EntireX message text (msg) are listed in the message.

Contact your Software AG technical support representative for assistance.

An error occurred during an attempt to deregister a webMethods EntireX source. The EntireX ID (host-id), service (service) and message text (msg) are listed in the message.

Contact your Software AG technical support representative for assistance.

A valid webMethods EntireX user ID is required but was not supplied.

Supply a valid webMethods EntireX user ID and try again.

A valid webMethods EntireX token is required but was not supplied.

Supply a valid webMethods EntireX token and try again.

An attempt to save the file listed in the message (fn) with the data listed in the message (dddd) was successful.

No action is required for this informational message.

An attempt to read from the resource listed in the message (resource-id) failed. The status code of the attempt is given in the message (code).

Contact your Software AG technical support representative for assistance.

An attempt is being made to read from the resource listed in the message (resource-id).

No action is required for this informational message.

A WebDAV error occurred during Event Replicator Target Adapter processing.

Verify that the web service target URL is correct and try again. If the problem persists, contact your Software AG technical support representative.

The WebDAV repository cannot be accessed.

Verify that the web service target URL is correct and try again. If the problem persists, contact your Software AG technical support representative.

An invalid WebDAV cache size has been specified. The value was not numeric.

Supply a valid numeric cache size and try again.

The XSLT file listed in the message (filename) could not be found.

If the problem persists, contact your Software AG technical support representative.

The XSLT file listed in the message (filename) could not be found.

If the problem persists, contact your Software AG technical support representative.

An internal error has occurred.

If the problem persists, contact your Software AG technical support representative.

An internal error has occurred.

If the problem persists, contact your Software AG technical support representative.

An attempt to save the schema named in the message (name) to the WebDAV repository failed.

If the problem persists, contact your Software AG technical support representative.

The WebDAV file named in the message (filename) could not be managed.

If the problem persists, contact your Software AG technical support representative.

The collection named in the message (colname) may not exist in the WebDAV repository. The collection is created.

No action is required for this informational message.

An attempt is in progress to retry the resource write for the resource named in the message (res).

No action is required for this informational message.

An attempt to write the resource file named in the message (fn) failed.

If the problem persists, contact your Software AG technical support representative.

A WebDAV internal error has occurred.

If the problem persists, contact your Software AG technical support representative.

An attempt to make the collection named in the message (colname) failed. The status of the attempt is also given in the message (stat).

If the problem persists, contact your Software AG technical support representative.

An attempt to shut down a source completed successfully.

No action is required for this informational message.

The source is waiting to be restarted after it was manually stopped or after a rollback occurred.

No action is required for this informational message. Restart the source when you are ready.

The value of the Retry Count parameter in the source definition has been reached. The source is waiting for a manual restart.

No action is required for this informational message. Manually restart the source when you are ready.

The source is waiting between retry attempts. The retry attempt count is given in the message (count).

No action is required for this informational message.

An internal error has occurred.

Contact your Software AG technical support representative for assistance.

An internal error has occurred.

Contact your Software AG technical support representative for assistance.

An internal error has occurred.

Contact your Software AG technical support representative for assistance.

The file cannot be opened. Verify that the directory name exists.

If the problem persists, contact your Software AG technical support representative.

This message is the heading message for a series of runtime metric messages.

No action is required for this informational message.

A resource key is listed in the message (rkey). Statistics about the resource are provided after the key.

No action is required for this informational message.

A metrics key is listed in the message (mkey). Metrics about the transaction identified by the metrics key are provided after the key.

No action is required for this informational message.

An Event Replicator Target Adapter process request failed. The source is shut down.

Review any accompanying error messages to determine the cause of the problem. If the problem persists, contact your Software AG technical support representative.

The result of a test to see whether the database is active or not is listed in the message (result).

No action is required for this informational message.

An attempt is in progress to retry the database transaction.

No action is required for this informational message.

An Event Replicator Target Adapter process request failed. The cause of the failure is given in the message (cause).

Contact your Software AG technical support representative for assistance.

An Event Replicator Target Adapter process request failed. The exception stack for the failure is given in the message (stack).

Contact your Software AG technical support representative for assistance.

The Event Replicator Target Adapter was unable to transform a document.

No action is required for this warning message. Determine the reason for which the Event Replicator Target Adapter cannot transform the document and alter the conditions as necessary. Then try again.

An insert or update transaction message was received that falls within the boundaries of an ADARIS Initial State.

This is a warning message informing of the situation described above. Followed by ART1008W or ART1009W if any action was taken with the message.

Warning that a record insert was changed to delete the record (if it exists) and insert the record in the current transaction. This can occur if an insert was processed during the user-defined ADARIS Initial State time boundaries for this file. The Initial State may have already picked up the new record. Avoids a Unique Key constraint error on the target.

Check that the record is in sync with the Adabas source record.

An update transaction was received that occurred during the user-defined ADARIS Initial State time boundaries for this file. The option Error Continue (ContinueOnSQLError) was dynamically turned on to avoid an SQL error on a record for which the update was already processed before the Initial State picked up the file.

Check that the record is in sync with the Adabas source record.

A file source definition has been configured for the input directory listed in the message (dirname).

No action is required for this informational message.

A file source definition is ready to receive data from the directory listed in the message (dirname).

No action is required for this informational message.

A file source could not get a list of the files from the source.

Determine why a list of files could not be obtained. Resolve the error and try again. If the problem persists, contact your Software AG support representative for assistance.

A file source is closing.

No action is required for this informational message.

The file source definition is returning the file source as part of the file source shutdown execution. The directory (dirname) and filenamefn) are given in the message.

No action is required for this informational message.

Shutdown of a file source was requested.

No action is required for this informational message.

Rollback of the updates from a file source was called.

No action is required for this informational message.

The file source file named in the message (fn) does not exist. This is an internal message.

Contact your Software AG technical support representative for assistance.

The processing time is given in the message for the file identified in the message.

No action is required for this informational message.

A rollback occurred based on SQL commands.

No action is required for this informational message.

A file name was not provided for the operation listed in the message (op). The file (fnum) and ISN (isnnum) numbers are also listed in the message.

No action is required for this informational message.

A test connection to the connection listed in the message (conn-name) failed.

Restart the database if it is down.

An attempt to connect to a data source failed.

Review the data source definition and try again. If the problem persists, contact your Software AG technical support representative for assistance.

An attempt to connect to a data source failed.

Review the data source definition and try again. If the problem persists, contact your Software AG technical support representative for assistance.

An exception occurred while the Event Replicator Target Adapter was attempting to obtain metadata from a table. The name of the table is given in the message (tblname).

Contact your Software AG technical support representative for assistance.

Event Replicator Target Adapter processing is continuing in spite of a previously reported error condition.

No action is required for this informational message.

The Event Replicator Target Adapter could not locate the table listed in the message (tablename).

No action is required for this informational message. If you really do need the Event Replicator Target Adapter to locate this table, determine why it cannot be located and try again. If the problem persists, contact your Software AG technical support representative.

An internal command to create the index to a table was successfully built.

No action is required for this informational message.

An attempt to connect to the data source named in the message (name) failed.

Verify that the database definitions are correct and that the database is active.

An attempt to retrieve metadata for the database failed.

Contact your Software AG technical support representative for assistance.

An internal error occurred in Sybase ASE

Contact your Software AG technical support representative for assistance.

An attempt was made to specify the unknown data type listed in the message (type) in the column listed in the message (colname).

Contact your Software AG technical support representative for assistance.

A mismatch has occurred between the table and the primary key. The table name (tblname) and the primary key (pkname) are given in the message.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An unsupported driver class name was specified for the JDBC database listed in the message (dbname).

Contact your Software AG technical support representative for assistance.

A connection to the database could not be made.

Verify that the database definitions are correct and that the database is active.

The table named in the message (tblname) has two columns with the same name (colname).

Change one of the column names and try again.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An attempt to connect to the database named in the message (dbname) failed.

Verify that the database definitions are correct and that the database is active.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An attempt to turn off the autocommit feature of the database failed.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

The target database Error Continue option was set to "true" (selected or turned on), so the SQL error is ignored and processing continues.

No action is required for this message.

An SQL command either failed or executed successfully. The SQL command and details about its processing are given in the message (<processing information>).

If an error occurred, and you have not selected the Error Continue option for the target database, the Event Replicator Target Adapter will stop running. For more information, read Specifying Target Database Processing Option Definitions.

If the command failed, resolve the error described in the message. If necessary, contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An attempt to insert an update failed because the full image of the record is missing from the database.

Use Option=32 in the Event Replicator Server destination definition. For more information, refer to your Event Replicator for Adabas destination documentation.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

The SQL command listed in the message (cmd) failed.

Review other accompanying error messages to determine the cause of the problem. If the problem persists, contact your Software AG technical support representative for assistance.

The previous SQL command failed with the reason code (rsncode) given in the message.

Review the documentation for your RDBMS to determine the cause of the problem.

The value for the Adabas-RDBMS Synchronization Level option is invalid. It has been reset to "ignore".

In the target database options, change the setting of the Adabas-RDBMS Synchronization Level option to something other than "ignore" if you want.

The Event Replicator Target Adapter could not alter the column described by the detailed information listed in the message (detailed-info) during it's attempt to synchronize the RDBMS table with the Adabas file.

Make sure the target database supports this kind of type conversion and that this column is not a primary key and doesn’t have foreign key. If the problem persists, contact your Software AG technical support representative for assistance.

During an attempt to synchronize the RDBMS table with the Adabas file, the Event Replicator Target Adapter determined that a data type or length mismatch had occurred for the column described by the detailed information listed in the message (detailed-info).

Issue the same message as the previous one. The Event Replicator Target Adapter will continue to run because the Adabas-RDBMS Synchronization Level value is set to "warn". If the problem persists, contact your Software AG technical support representative for assistance.

The column described by the detailed information listed in the message (detailed-info) was altered in the RDBMS during Event Replicator Target Adapter synchronization between the RDBMS table and the Adabas file.

No action is required for this informational message.

The column described by the detailed information listed in the message (detailed-info) was added to the RDBMS during Event Replicator Target Adapter synchronization between the RDBMS table and the Adabas file.

No action is required for this informational message.

The Event Replicator Target Adapter could not add the column described by the detailed information listed in the message (detailed-info) to the RDBMS during it's attempt to synchronize the RDBMS table with the Adabas file.

Make sure the target database supports adding columns. If the problem persists, contact your Software AG technical support representative for assistance.

During an attempt to synchronize the RDBMS table with the Adabas file, the Event Replicator Target Adapter determined that the target RDBMS is missing the column described by the detailed information listed in the message (detailed-info).

This message is issued because the Adabas-RDBMS Synchronization Level value is set to "warn". In this case, the Event Replicator Target Adapter issues this warning message and continues processing.

No action is required for this warning message.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

The Event Replicator Target Adapter received an unexpected response code nn for the described operation.

Please check the Replicator SYSOUT for further details.

Transaction caching is active and the Event Replicator Target Adapter has attempted to process a transaction which has already been recorded as processes.

Verify the integrity of the replicated data.

Informational message at startup notifying transaction caching is disabled. This is the default behavior.

No action is required for this informational message.

Informational message displayed at startup, indicating enhanced ADARIS Initial State processing is active.

No action is required for this informational message.

The Event Replicator Target Adapter completed loading replicated data for the Oracle SQL Loader listed in the message without failing.

No action is required for this informational message.

An attempt to load replicated data to the database via the Oracle SQL loader failed. The log files (fn) that contain more information are listed in the message.

Review the log files for more information about the failure. If possible, correct the error and try again. If the problem persists, contact your Software AG technical support representative for assistance.

An exception occurred during the loading process.

Contact your Software AG technical support representative for assistance.

A request to create the table in an XML file failed because the XML file could not be found. The filename of the XML file is given in the message (fn).

Contact your Software AG technical support representative for assistance.

The control file listed in the message (fn) was not generated.

Contact your Software AG technical support representative for assistance.

The loader cannot support streaming mode.

Modify the target database options used by the database so that the Use Stream option is not selected (checked) and try again. For more information, read Specifying Target Database Processing Option Definitions.

The output file named in the message (fn) was not generated.

Contact your Software AG technical support representative for assistance.

The current configuration does not support streaming mode. The Event Replicator Target Adapter turns stream mode off and retries the operation.

No action is required for this informational message.

The current configuration does not support the database in loader mode.

No action is required for this informational message.

The database loader process is running for the Oracle SQL Loader listed in the message.

No action is required for this informational message.

The database loader process is executing the command listed in the message (cmd).

No action is required for this informational message.

An attempt by the Event Replicator Target Adapter to create a loader thread is in process.

No action is required for this informational message.

An error occurred trying to call the table (tblname) and column (colname) whose names are listed in the message.

Contact your Software AG technical support representative for assistance.

The initial-state process is running in loader mode.

No action is required for this informational message.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

The test loader process completed successfully.

No action is required for this informational message.

The test loader process failed with the exit code listed in the message (code).

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An attempt to set the environment variables for the file named in the message (fn) failed.

Contact your Software AG technical support representative for assistance.

Support is not provided for the database type.

Change the database type to one that is supported by the Event Replicator Target Adapter. If necessary, contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

The loader failed.

Modify the target database options used by the database so that the Use Stream option is not selected (checked) and try again. For more information, read Specifying Target Database Processing Option Definitions.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

A parsing error occurred. The error, line number, column number, process ID, and command ID are given in the message.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

The current database does not support streaming mode. The Event Replicator Target Adapter has turned streaming mode off.

No action is required for this warning message.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

The WebDAV file cannot be found.

Contact your Software AG technical support representative for assistance.

The batch file named in the message does not exist.

Contact your Software AG technical support representative for assistance.

The service name of the loader during Teradata MLoad processing is too long. The Event Replicator Target Adapter is using the name xxxx for the tdpid of the MLoad processing.

No action is required for this warning message.

The service name of the loader during Teradata MLoad processing has not been provided. The Event Replicator Target Adapter is trying to use the name xxxx for the tdpid of the MLoad processing.

No action is required for this warning message.

The Event Replicator Target Adapter is attempting to transform the document using the XSLT file (fn) and token (token) listed in the message.

No action is required for this informational message.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

A request was made to shut down the source manager.

No action is required for this informational message.

The source manager has been notified to shut down.

No action is required for this informational message.

The Event Replicator Target Adapter is waiting for the source manager to fully shut down.

No action is required for this informational message.

The source manager shutdown has completed.

No action is required for this informational message.

A request was made to shut down the engine manager.

No action is required for this informational message.

The engine manager has been notified to shut down.

No action is required for this informational message.

The Event Replicator Target Adapter is waiting for the engine manager to fully shut down.

No action is required for this informational message.

The engine manager shutdown has completed.

No action is required for this informational message.

The parameter named in the message (parm) specifies a value (val) that is not numeric.

Supply a numeric value for the parameter and try again.

The parameter named in the message (parm) specifies a value (val) that does not end in an "S".

Supply a value for the parameter that ends in an "S" and try again.

The parameter named in the message (parm) specifies a value (val) that is not "true" or "false."

Supply a "true" or "false" value for the parameter and try again.

An attempt to open the WebSphere MQ trace file named in the message (fn) failed.

Check your definition. Verify that the directory defined in your definitions exists.

A rollback attempt for WebSphere MQ failed.

Review the webSphere MQ documentation to determine the reason for the failure.

An attempt to logon to WebSphere MQ failed. The WebSphere MQ host ID (hostid), port number (portnum), and the error number (err) from the attempt are given in the message.

Check with your WebSphere MQ administrator to determine why the attempt failed. Resolve the problem and try again.

The attempt to log onto the WebSphere MQ host named in the message (hostid) was successful.

No action is required for this informational message.

WebSphere MQ is receiving and processing messages from the queue listed in the message (qname).

No action is required for this informational message.

A WebSphere MQ request failed.

Check with your WebSphere MQ administrator to determine why the attempt failed. Resolve the problem and try again.

A receive request via the WebSphere MQ queue failed.

Check with your WebSphere MQ administrator to determine why the attempt failed. Resolve the problem and try again.

A commit request via the WebSphere MQ queue failed.

Check with your WebSphere MQ administrator to determine why the attempt failed. Resolve the problem and try again.

A send request via the WebSphere MQ queue failed.

Check with your WebSphere MQ administrator to determine why the attempt failed. Resolve the problem and try again.

A close request via the WebSphere MQ queue failed.

Check with your WebSphere MQ administrator to determine why the attempt failed. Resolve the problem and try again.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An attempt to run the operation named in the message (opname) failed because it is not supported.

Try an operation that is supported.

An internal error occurred.

Contact your Software AG technical support representative for assistance.

An attempt to use the wrong JMS factory type for the type of messaging specified. The message type (msgtype) and factory type (factype) are given in the message. Replicate the data to a JMS topic if you want to use publish-subscribe messaging; replicate the data to a JMS queue if you want to use point-to-point messaging.

Verify the JMS target definition is specified correctly in the Event Replicator Target Adapter Administration tool. Contact your Software AG technical support representative for assistance.

An attempt to access the JMS topic or queue connection factory in the system was not successful.

Verify the JMS target definition is specified correctly in the Event Replicator Target Adapter Administration tool. Contact your Software AG technical support representative for assistance.

An error occurred attempting to access the JMS topic or queue connection factory named in the message in the system named in the message.

Verify the JMS target definition is specified correctly in the Event Replicator Target Adapter Administration tool. Contact your Software AG technical support representative for assistance.

An attempt to use the wrong type of destination was made when replicating data to JMS queues or topics. The JMS destination topic or queue name (jmsname) and the factory type (factype) are given in the message. Specify the destination as a JMS topic (as defined to webMethods Broker) if you want to use publish-subscribe messaging; specify the destination as a JMS queue (as defined to webMethods Broker) if you want to use point-to-point messaging.

Verify the JMS target definition is specified correctly in the Event Replicator Target Adapter Administration tool. Contact your Software AG technical support representative for assistance.

An internal error occurred. The destination specified in the JMS target definition was not found in the JNDI provider specified in the JMS target definition. The destination name is given in the message.

Verify the JMS target definition is specified correctly in the Event Replicator Target Adapter Administration tool. Contact your Software AG technical support representative for assistance.

An internal error occurred. An error occurred during an attempt to access the destination specified in the JMS target definition.

Verify the JMS target definition is specified correctly in the Event Replicator Target Adapter Administration tool. Contact your Software AG technical support representative for assistance.