Working with TCP/IP OCF connections (Option 4.2.3)

Overview

Option 4.2.3 enables you to control Open Communication Facility (OCF) connections that use TCP/IP.

Availability

Option 4.2.3 is only available if the selected subsystem is a Beta 02 started task with TCP/IP OCF connections.

TCP/IP OCF Connections

Option 4.2.3 displays the TCP/IP OCF connections in a table:

PEB4TO05 ---------------------------------------------------------------------
 Command ===> ________________________________________________ Scroll ===> PAGE

 TCP/IP OCF Connections Subsys-ID - Q02W
 Sysname - BETA
 Seg.: 1 / 1

 XM - Display XCF Member Information XT - Display XCF-STC Connection

 S Loc. Rem. Status Local Converse IP-Address Task Retry
 SSID SSID L R C ApplID ApplID Cnt Acnt Int
 Q02W AC 00#28891 10.56.83.100 TCPIP
 Q88L AC AC 01#28892 10.56.83.40 TCPIP 7 0 5
 Q88D AC AC 02#28893 10.56.83.30 TCPIP 9 0 4
 Q024 AC AC 01#28892 10.56.83.40 TCPIP 7 0 5
 Q023 AC AC 02#28893 10.56.83.30 TCPIP 9 0 4
 Q88C AC 10.56.83.100 TCPIP
******************************** BOTTOM OF DATA ********************************





Columns

Column

Description

Loc. SSID

Subsystem ID of the local system

Rem. SSID

Subsystem ID which is found on another system and is integrated into an OCF group

Status L

Status of the local subsystem ID:

AC

Active

PN

Pending

IN

Inactive

RT

Retry

RE

Retry exceeded

Status R

Status of the remote subsystem ID:

AC

Active

PN

Pending

IN

Inactive

Status C

Status of the connection:

AC

Active

PN

Pending

IN

Inactive

RT

Retry

RE

Retry exceeded

Local ApplID

Name of the local connection application

Converse ApplID

Name of the remote connection application used to establish connection

IP-Address

IP adress of the port

Task

Processing task of the port (IP stack)

Retry

Retry values of the OCF converse definition in the LST member

Cnt

Maximum number of retries

Acnt

Number of processed retries

Int

Retry interval in seconds

Line commands

You can use the following line commands to display XCF information if the subsystem ID is a member of a sysplex:

XM

Displays XCF member information

XT

Displays XCF-STC connection