Displaying group control blocks (GCB)

Overview

Use option 2.1 to display information on group control blocks (GCB).

Procedure

1. In the "Service Manager Selection Menu" enter 2.1 to call the "Started Task Status Information" panel:

   PEB4GCB -----------------------------------------------------------------------
   Command ===> _________________________________________________________________
   
   Started Task Status Information Subsys-ID - S93P
   Sysname - BETA
   
   STC Name : BETA93BA JES Id : STC02146 ASID: 116
   Start Date : 20.02.2002 Start Time : 09:03:15:00
   Elapsed Time : 1957 MIN
   Status : ACTIVE
   OCF Conn. : NO ARM Conn. : NO
   DB Type : MASTER / SHARED
   System : BSAB93 Location : BERLIN
   Storage Region / Allocated
   Above Below
   1874M / 33864K 8168K / 2964K
   
   STC Transaction Information
   GCB Name ===> *________ (Name or Mask)
   FCB Name ===> _________ (Name or Mask)
   
   
   Press the ENTER key to display the selected information.
   

2. In the lower part of the panel, specify a name of a GCB in the GCB Name field. Masks are allowed. The default setting is an asterisk (*), which will display all GCBs. To display all GCBs starting with BSA, for example, specify BSA*.

Result

The "Display GCB Information" table is called:

PEB4DI03 ------------------------------------------------------ Row 1 of 10
Command ===> ________________________________________________ Scroll ===> PAGE

Display GCB Information Subsys-ID - S93P
Sysname - BETA
Select FCB ===> * (Name or Mask)
Used CPU Time ===> 0 (CPU Time in sec, > ,or <)

S - Select

S GCB Name Active FCB Number of FCBs SFF GCB CPU Time
Total Disp Nodisp Wait Storage (hhmmss)
BSA-BQL BSA-BQL 3 0 0 3 83K 00.00.12
BSA-BQL1 BSA-BQL1 5 0 0 5 39K 00.00.02
BSA-BQL2 BSA-BQL2 5 0 0 5 60K 00.00.02
BSA-BQL3 BSA-BQL3 5 0 0 5 60K 00.00.02
BSA-BQL4 BSA-BQL4 6 0 0 6 85K 00.00.02
BSA-BQL5 BSA-BQL5 6 0 0 6 137K 00.00.06
BSA-OCF BSA-OCF 2 0 0 2 1K 00.00.00
BSA-SRV 16263444 3 0 0 2 33K 00.00.08
BSA-TCP BSA-TCP 2 0 0 2 796B 00.00.00
BSATCPSV BSATCPSV 2 0 0 2 52K 00.00.10
******************************** BOTTOM OF DATA ********************************

Fields

Field	Description
Select FCB	The default (*) displays all FCBs of a GCB. You can enter an FCB name. Masks are allowed.
Used CPU Time	You can enter the used CPU time in seconds of an FCB in seconds. The default is 0, which displays all FCBs of a GCB. You can use the following operators:

For information on how these fields are used, see "Displaying specific FCBs".

Columns

Column	Description
S	Column to select the FCBs of a GCB You can filter the displayed FCBs using the fields Select FCB and Used CPU Time. The default (an asterisk in the field Select FCB) results in the display of all FCBs of the selected GCB.
GCB Name	Name of the GCB
Active FCB	Name of the FCB that is in control when the panel was called
Number of FCBs	Number of associated FCBs divided into a status display on the following: Total Total number of FCBs Disp Active number of FCBs Nondisp Inactive FCBs Wait Active FCBs awaiting a result
SFF Storage	Amount of storage from the SFF storage pool reserved for the programs of a group being run. The storage is displayed in K (kilobytes) or in B (bytes).
GCB CPU Time	cumulative CPU time the GCB has used

Line commands

S	Select an FCB or FCBs of a group in accordance with the selection parameter entered in the fields Select FCB and Used CPU Time (see "Field description" above).