8546I

8546I GLOBAL XCF ADDRESS SPACE(name/ssid) HAS BEEN STARTED (RC: rc/irc)

Written to:

Operator console, JESMSGLG.

Explanation:

Parameter XCF_GBAS was set during the XCF-intitialization of subsystem ssid using BST01ARI. However, the address space for the BSA XCF Global component was not active. Therefore a start command was generated to obtain the necessary address space. name shows the name of the address space. The return code rc and the reason code irc show the results of the initiated start command via macro ASCRE. Refer to ASCRE (IBM literature) for descriptions of rc and irc. As a rule, the results should be RC=0 with IRC=0. However, RC=0 with IRC=4 can also be expected. Make sure that the appropriate start procedure as specified in parameter XCF_GBAS is available. The message merely shows that the start procedure was initiated, but not whether the address space is really active.

System Action:

Initialization continues.

Operator Response:

Check whether the address space has really been started (see messages SFF8540I and SFF8541I).