AAS0001I | AAS0002I | AAS0003I | AAS0004I | AAS0005I | AAS0006I | AAS0007I | AAS0009I | AAS0010I | AAS0011I | AAS012I | AAS0013I | AAS0014I | AAS0015I | AAS0016I | AAS0017I | AAS0018I | AAS0019I | AAS0020I | AAS0021I | AAS0022I | AAS0023I | AAS0024I | AAS0025I | AAS0026I | AAS0027I | AAS0028I | AAS0029I | AAS030I | AAS0032I | AAS0035I | AAS0037I | AAS0038I | AAS0039I | AAS0040I | AAS0041I | AAS0042I | AAS0043I | AAS0044I | AAS0045I | AAS0046I | AAS0047I | AAS0048I | AAS0049I | AAS0056I | AAS0057I | AAS0058I | AAS0059I | AAS0060I | AAS0061I | AAS0062I | AAS0063I | AAS0064I | AAS0065I | AAS0066I | AAS0067I | AAS0068I | AAS0069I | AAS0071I | AAS0072I | AAS0073I | AAS0074I | AAS0075I | AAS0076I | AAS0077I | AAS0078I | AAS0079I | AAS0080I | AAS0081I | AAS083I | AAS084I | AAS0085E | AAS0086I | AAS0087I | AAS0088I | AAS0089I | AAS0090I | AAS0091I | AAS0092I | AAS0093I | AAS0094I | AAS0097I | AAS0098I | AAS0099I | AAS0102W | AAS0103W | AAS0104W | AAS0105W | AAS0106W | AAS0108W | AAS0109W | AAS0111I | AAS0112I | AAS0113I | AAS0114W | AAS0115W | AAS0116W | AAS0117W | AAS0118W | AAS0119W | AAS0120W | AAS0121I | AAS0122I | AAS0123W | AAS0125W | AAS0127I | AAS0128I | AAS0131I | AAS0132I | AAS0133I | AAS0150I | AAS0151I | AAS0156I | AAS0158I | AAS0159I | AAS0163I | AAS0164I | AAS0203E | AAS0208E | AAS0209E | AAS0210E | AAS0211E | AAS0212E | AAS0213E | AAS0215E | AAS0216E | AAS0217E | AAS0218E | AAS0219E | AAS0220E | AAS0221E | AAS0223E | AAS0228E | AAS0229E | AAS0230E | AAS0231E | AAS0232E | AAS0233E | AAS0235E | AAS0237E | AAS0238E | AAS0239E | AAS0240E | AAS0241E | AAS0242E | AAS0243E | AAS0245E | AAS0246E | AAS0247E | AAS0248E | AAS0249E | AAS0251E | AAS0252E | AAS0253E | AAS0254E | AAS0255E | AAS0256E | AAS0258E | AAS0304S | AAS0305S | AAS0310S | AAS0311S | AAS0312S | AAS0313S | AAS0314S | AAS0315S | AAS0316S | AAS0317S | AAS0318S | AAS0319S | AAS0402F | AAS0407F | AAS0408F | AAS0409F | AAS0414F | AAS0415F | AAS0601E | AAS0602E | AAS0603E | AAS0604I | AAS0605E | AAS0606I | AAS0607E | AAS0608E | AAS0609E | AAS0610I | AAS0611I | AAS0612E | AAS0613I | AAS0614I | AAS0615I | AAS0616I | AAS0617I | AAS0618E | AAS0619E | AAS0620E | AAS0621I | AAS0622I | AAS0623I | AAS0624I | AAS0625E | AAS0626E | AAS0627E | AAS0628I | AAS0629I | AAS0630I | AAS0631E | AAS0632E | AAS0633E | AAS0634E | AAS0635E | AAS0636E | AAS0637E | AAS0638E | AAS0639E | AAS0640I | AAS0641I | AAS0642I | AAS0643I | AAS0644E | AAS0645I | AAS0646E | AAS0647I | AAS0648I | AAS0649I | AAS0650I | AAS0651I | AAS0652I | AAS0653I | AAS0654I | AAS0655I | AAS0656E | AAS0657E | AAS0658E | AAS0659E | AAS0660E | AAS0670E | AAS0671E | AAS0672I | AAS0673E | AAS0674E | AAS0675E | AAS0676E | AAS0677I | AAS0678E | AAS0679E | AAS0680E | AAS0681E | AAS0682E | AAS0683E | AAS0684E | AAS0685E | AAS0686E | AAS0687E | AAS0689E | AAS0690E | AAS0691E | AAS0692E | AAS0693E | WCP0693E | AAS0694E | AAS0695E | WCP0695E | AAS0696E | AAS0697E | AAS0698E | AAS0699E | AAS0700E | AAS0701E | AAS0702E | AAS0703E | AAS0704W | AAS0705E | AAS0706E | AAS0707E | AAS0708E | AAS0709I | AAS0710E | AAS0711E | AAS0713E | AAS0714E | AAS0715E | AAS0716E | AAS0717I | AAS0718I | AAS0719E | AAS0720E | AAS0721E | AAS0722E | AAS0723E | AAS0724E | AAS0725E | AAS0726E | AAS0727E | AAS0728E | AAS0729E | AAS0730E | AAS0731E | AAS0732E | AAS0733E | AAS0734E | AAS0735E | AAS0736E | AAS0738E | AAS0739E | AAS0740E | AAS0741E | AAS0742E | AAS0743E | AAS0744E | AAS0745E | AAS0746E | AAS0747E | AAS0749E | AAS0750E | AAS0751E | AAS0752E | AAS0753E | AAS0754I | AAS0755I | AAS0756E
AAS0001I | Processing ADABAS v6.3 only |
Explanation |
Adabas Administration Services is processing Adabas 6.3 databases only. |
Action |
No action is required for this informational message. |
AAS0002I | Processing ADABAS v6.4 only |
Explanation |
Adabas Administration Services is processing Adabas 6.4 databases only. |
Action |
No action is required for this informational message. |
AAS0003I | Unable to load the AIF library rc=respcode |
Explanation |
Adabas Administration Services was unable to load the required AIF library. The response code from the attempt is given in the message. |
Action |
Review the meaning of the response code to identify and resolve the problem. If the problem persists, contact your Software AG technical support representative. |
AAS0004I | Unable to identify Adabas path and load the AIF library |
Explanation |
Adabas Administration Services was unable to identify the Adabas database location and load the AIF library. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0005I | Adabas Path=path |
Explanation |
Adabas Administration Services located the Adabas database at the path identified in the message. |
Action |
No action is required for this informational message. |
AAS0006I | Adabas Administration Service for platform is initializing on date |
Explanation |
Adabas Administration Services is initializing. The platform on which it is initializing and the date are given in the message. |
Action |
No action is required for this informational message. |
AAS0007I | Product Information : Version=version Patch Level=number |
Explanation |
This message displays general information about the installed Adabas Administration Services. |
Action |
No action is required for this informational message. |
AAS0009I | Total Service Requests count |
Explanation |
This message provides the total number of requests made to the service. |
Action |
No action is required for this informational message. |
AAS0010I | Process Resources: FSIZE (d/d) NOFILE (d/d) |
Explanation |
This message provides information to Software AG technical support. |
Action |
No action is required for this informational message. |
AAS0011I | Total Direct Clients count |
Explanation |
This message provides the total number of direct clients connected to the service. |
Action |
No action is required for this informational message. |
AAS012I | Total Relayed Clients count |
Explanation |
This message provides the total number of relayed clients connected to the Kernel. |
Action |
No action is required for this informational message. |
AAS0013I | Period time nh.nm.ns |
Explanation |
This message provides the length of time the service has been running. |
Action |
No action is required for this informational message. |
AAS0014I | Administration Messages count |
Explanation |
This message provides the total number of administration messages made to the service. |
Action |
No action is required for this informational message. |
AAS0015I | e-Business Communication Errors count |
Explanation |
This message provides the total number of communication errors that occurred with the service. |
Action |
No action is required for this informational message. |
AAS0016I | Total Service Replies count |
Explanation |
This message provides the total number of replies made by the service. |
Action |
No action is required for this informational message. |
AAS0017I | Total Service Input Bytes count |
Explanation |
This message provides the total number of bytes input to the service. |
Action |
No action is required for this informational message. |
AAS0018I | Adabas Administration Service initialization complete |
Explanation |
Adabas Administration Services has initialized successfully. |
Action |
No action is required for this informational message. |
AAS0019I | Total Service Output Bytes count |
Explanation |
This message provides the total number of bytes output by the service. |
Action |
No action is required for this informational message. |
AAS0020I | ADABAS Version=v.r.s.m |
Explanation |
This message identifies the version of the Adabas database. |
Action |
No action is required for this informational message. |
AAS0021I | Unable to find ADABAS 6.3 registry RGS rc=resp-code |
Explanation |
Adabas Administration Services was unable to locate the Adabas 6.3 registry. The response code from the attempt is given in the message. |
Action |
Review the response code to determine what the problem is and how to repair it. Contact your Software AG technical support representative if you need assistance. |
AAS0022I | Unable to determine the ADABAS version |
Explanation |
Adabas Administration Services was unable to determine the Adabas version. |
Action |
No action is required for this informational message. |
AAS0023I | Disconnection notified by remote Service=service name |
Explanation |
The remote service listed in the message has successfully disconnected. The reference number (ref-num) given in the message is for internal Software AG use only. |
Action |
No action is required for this informational message. |
AAS0024I | This log file is being closed by user-name |
Explanation |
The log file is being closed by a user of the System Management Hub or the NETSTOP utilities. A new net-work.log file is being created. |
Action |
No action is required for this informational message. |
AAS0025I | DBID=dbid is now registered on the local service |
Explanation |
An Adabas database with the identified database number is now registered on the local service. |
Action |
No action is required for this informational message. |
AAS0026I | DBID=dbid no longer registered on the local service |
Explanation |
The Adabas database with the identified database ID is no longer registered with the local service. |
Action |
No action is required for this informational message. |
AAS0027I | ADABAS Version mismatch; expected version1 found version2 |
Explanation |
Adabas Administration Services encountered a mismatch between the expected Adabas version and the actual Adabas version. |
Action |
No action is required for this informational message. |
AAS0028I | Immediate disconnection of DBID=dbid |
Explanation |
The identified database has indicated an immediate disconnection. |
Action |
No action is required for this informational message. |
AAS0029I | DBID=dbid is now connected to the local service |
Explanation |
The identified e-business Adabas database is now active on the local service. |
Action |
No action is required for this informational message. |
AAS030I | Information from Internal Transport Subsystem: info |
Explanation |
Information from the internal transport subsystem used by Adabas Administration Services is provided in this message. |
Action |
No action is required for this informational message. |
AAS0032I | Total CPU Time since started nh.nm.ns |
Explanation |
This message provides the total CPU time that occurred since the SERVICE started. |
Action |
No action is required for this informational message. |
AAS0035I | Adabas Administration Service Name=name |
Explanation |
The name of the Adabas Administration Services is given in the message. |
Action |
No action is required for this informational message. |
AAS0037I | Service=servicename |
Explanation |
This message identifies the name of the service |
Action |
No action is required for this informational message. |
AAS0038I | Nodes count |
Explanation |
This message provides the number of nodes that the service knows about. |
Action |
No action is required for this informational message. |
AAS0039I | Connected Nodes Count count |
Explanation |
This message provides the number of nodes to which the service is connected. |
Action |
No action is required for this informational message. |
AAS0040I | **********Periodic statistical data report********** |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0041I | Current Direct Clients count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of current direct clients connected to this service. |
Action |
No action is required for this informational message. |
AAS0042I | Current Relayed Clients count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of current relayed clients connected to this service. |
Action |
No action is required for this informational message. |
AAS0043I | Total Memory Allocations count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0044I | Total Memory Frees count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0045I | Databases count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0046I | Active Databases count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0047I | Local Adabas calls count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0048I | Host Counter count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of hosts connected to this service. |
Action |
No action is required for this informational message. |
AAS0049I | Number of Work Units Processed count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0056I | Messages Processed count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0057I | Ping Counter count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of pings to this service. |
Action |
No action is required for this informational message. |
AAS0058I | Contexts Processed count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of contexts processed by the service. |
Action |
No action is required for this informational message. |
AAS0059I | Contexts Active count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the number of active contexts. |
Action |
No action is required for this informational message. |
AAS0060I | Service Inbound Requests/Secrate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (requests per second) at which inbound requests have been processed by the service. |
Action |
No action is required for this informational message. |
AAS0061I | Service Outbound Requests/Sec rate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (requests per second) at which outbound requests have been processed by the service. |
Action |
No action is required for this informational message. |
AAS0062I | Service Inbound Data Rate (b/s) rate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (bytes per second) at which inbound data has been processed by the service. |
Action |
No action is required for this informational message. |
AAS0063I | Service Outbound Data Rate (b/s) rate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. It displays the rate (bytes per second) at which outbound data has been processed by the service. |
Action |
No action is required for this informational message. |
AAS0064I | Database Requests/Second rate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0065I | Database Replies/Second rate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0066I | Database Request Data Rate (b/s) rate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0067I | Database Reply Data Rate (b/s) rate |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0068I | Percentage of CPU Usage count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0069I | Time since started hh:mm:ss |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0071I | Thread thread-number Work Units Completed count |
Explanation |
This message is one of many messages that comprise the Periodic Statistical Data Report. |
Action |
No action is required for this informational message. |
AAS0072I | Disconnection indication from DBID=dbid |
Explanation |
The identified database has indicated an immediate disconnection. |
Action |
No action is required for this informational message. |
AAS0073I | Current CPU usage value |
Explanation |
The current CPU usage is shown in the message. |
Action |
No action is required for this informational message. |
AAS0074I | Disconnection from Service=servicename |
Explanation |
An attempt to disconnect from a service occurred. |
Action |
No action is required for this informational message. |
AAS0075I | Outbound connection to Service=servicename |
Explanation |
An outbound connection exists for the service listed in the message. |
Action |
No action is required for this informational message. |
AAS0076I | Outbound connection to Service=servicename failed rc=rsp |
Explanation |
The outbound connection for the service listed in the message failed. The response code from the attempt is also given in the message. |
Action |
Make sure the node of the outbound connection is up and that its parameters are configured correctly. Then refresh the service connections, restarting it if necessary to do so. |
AAS0077I | Service listening on TCPIP port=portnum |
Explanation |
A service is listening on the TCP/IP port listed in the message. |
Action |
No action is required for this informational message. |
AAS0078I | Service listening on SSL port=portnum |
Explanation |
A service is listening on the SSL port listed in the message. |
Action |
No action is required for this informational message. |
AAS0079I | SMH server listening on TCPIP port=portnum |
Explanation |
The SMH server is listening on the TCP/IP port listed in the message. |
Action |
No action is required for this informational message. |
AAS0080I | DBID=dbid has now started on the local service |
Explanation |
The identified database is now active on the local service and can now be accessed. |
Action |
No action is required for this informational message. |
AAS0081I | Local DBID=dbid is no longer available |
Explanation |
The identified database has been deactivated on the local node and is therefore no longer available to any clients. |
Action |
No action is required for this informational message. |
AAS083I | Shutdown request received from agent |
Explanation |
A shutdown request for Adabas Administration Services has been received. |
Action |
No action is required for this informational message. |
AAS084I | Signal value=signal |
Explanation |
The UNIX signal value is given in the message. |
Action |
No action is required for this informational message. |
AAS0085E | e-Business server failed with error=number |
Explanation |
The message indicates that the service failed. An error number is provided in the message. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0086I | Periodic ping of classic node=node-name took nnnn milliseconds |
Explanation |
As the result of a periodic heartbeat operations, this classic node was sent a ping message to check its connection path. The classic node replied within the time indicated. |
Action |
No action is required for this informational message. |
AAS0087I | Periodic ping of DBID=dbid took nnnn milliseconds |
Explanation |
As the result of a periodic "heartbeat" operation, this database was sent a "PING" message to check its availability. The database replied within the time indicated. |
Action |
No action is required for this informational message. |
AAS0088I | Continuation of previous log file, renamed to netxxxxx.log |
Explanation |
The log file is renamed to netxxxxx.log, where xxxxx is a number. This message appears as the first line on a continuation log file. |
Action |
No action is required for this informational message. |
AAS0089I | e-Business server incoming connection |
Explanation |
An incoming service connection is described in the message. The reference number (ref-num) listed in the message is for internal Software AG use only. |
Action |
No action is required for this informational message. |
AAS0090I | e-Business server is now connected to nodename |
Explanation |
The identified server is now connected to the local node. The reference number (ref-num) listed in the message is for internal Software AG use only. |
Action |
No action is required for this informational message. |
AAS0091I | Servers nnnnnnnn |
Explanation |
This message is part of the periodic statistical data report. |
Action |
None. This message is informational only. |
AAS0092I | Service=servicename is registered |
Explanation |
The identified service is now accessible from the local node. |
Action |
None. This message is informational only. |
AAS0093I | Immediate disconnection from Service=servicename |
Explanation |
An immediate disconnection for the named service occurred. The reference number (ref-num) given in the message is for internal Software AG use only. |
Action |
No action is required for this informational message. |
AAS0094I | Command Parameter=num value |
Explanation |
The setting of a user command parameter is given in the message. |
Action |
No action is required for this informational message. |
AAS0097I | Listening for clients on TCPIP port=portnum |
Explanation |
This message identifies the TCP/IP port number on which the services is listening for clients. |
Action |
No action is required for this informational message |
AAS0098I | Listening for clients on SSL port=portnum |
Explanation |
This message identifies the SSL port number on which the services is listening for clients. |
Action |
No action is required for this informational message |
AAS0099I | Adabas Administration Service is terminating |
Explanation |
The Adabas Administration Services is terminating. |
Action |
No action is required for this informational message. |
AAS0102W | No outbound connections defined for this configuration |
Explanation |
No outbound connections have been defined for this configuration. |
Action |
No action is required for this warning message. |
AAS0103W | Adabas Context=context DBID=dbid Deleted |
Explanation |
The Adabas context listed in the message has been deleted for the database listed in the message. |
Action |
No action is required for this warning message. |
AAS0104W | Remote access for WCP services has been disabled |
Explanation |
Remote access to Entire Net-Work open system services has been disabled. |
Action |
No action is required for this warning message. |
AAS0105W | Remote access for WCL services has been disabled |
Explanation |
Remote access for Entire Net-Work Client services has been disabled. |
Action |
No action is required for this warning message. |
AAS0106W | Remote access for ART services has been disabled |
Explanation |
Remote access for Event Replicator Target Adapter services has been disabled. |
Action |
No action is required for this warning message. |
AAS0108W | Adabas Context=context DBID=dbid Owners=id Set for deletion |
Explanation |
The Adabas context listed in the message for the database and owners listed in the message is scheduled for deletion. |
Action |
No action is required for this warning message. |
AAS0109W | Local DBID=dbid starting, but previous location was remote |
Explanation |
A database has started on the local node; however, this database ID was previously used by another database on a remote node. |
Action |
This indicates a configuration error that needs to be corrected. |
AAS0111I | Trace level set to trclevel by SMH user |
Explanation |
The trace level has been reset by a System Management Hub (SMH) user. The new trace level is given in the message. |
Action |
No action is required for this informational message. |
AAS0112I | Ping request received from the user; Target=target ID Length=length Count=number |
Explanation |
A user has requested a PING operation to the target ID identified in the message. PINGs are used to test the integrity of a remote connection to the path to a database. |
Action |
No action is required for this informational message. |
AAS0113I | Start new log file requested by the user |
Explanation |
A user has requested that the current logging file be closed and a new log file started. |
Action |
No action is required for this informational message. |
AAS0114W | No directory information for server-ID |
Explanation |
An internal error occurred for a service. It was not possible to create the definitions for a database to allow it to be accessed by clients. |
Action |
Restart the service. |
AAS0115W | Unidentified database ping reply received |
Explanation |
A PING message was received for which there was no PING request. This indicates that a logical messages sequencing failure occurred at a remote database. |
Action |
If the error persists, restart the remote database. |
AAS0116W | Calling DBID=dbid failed rc=rc-code |
Explanation |
Following a connection by a database (message AAS0029I), the service tried to send a simple Adabas command to the database to test the integrity of the communications path. This test failed. The database is not registered at the local node nor is it broadcast to other nodes. This error normally results from a failure to provide an XTSaccess URL for the database in the Directory Server. The Adabas response code from the connection attempt is given in the message. For complete information on Adabas response codes, refer to the Adabas messages and codes documentation. |
Action |
Verify that you have provided an XTSaccess URL for the database in the Directory Server and try again. |
AAS0117W | DBID=dbid is now connected as e-business |
Explanation |
An Adabas database has connected previously as a classic or local database, disconnected, and is now being connected as an e-business database. This may be intentional or it may be a configuration error. |
Action |
No action is required for this informational message. |
AAS0118W | DBID=dbid issued an e-business disconnection |
Explanation |
A database was originally connected as a classic or local database, but an e-business disconnection was received. The database is not disconnected. |
Action |
If the error persists, contact your Software AG technical support representative. |
AAS0119W | Duplicate URL=url for target=targetid in the Directory Server |
Explanation |
A duplicate URL has been found for a target definition in the Directory Server. The URL and the target ID are given in the message. |
Action |
No action is required for this warning message. |
AAS0120W | URL=url for Target=targetid has a syntax error |
Explanation |
A syntax error was discovered in the URL for a target definition in the Directory Server. The URL and the target ID are given in the message. |
Action |
No action is required for this warning message. |
AAS0121I | ClientId=client-id Host=host-id Port=portnum connected; Current Clients=count |
Explanation |
This message indicates that an incoming client connection was made and identifies the client ID, the host ID, the port number, and the number of current active client connections. |
Action |
No action is required for this informational message. |
AAS0122I | ClientId=client-id disconnected; Current Clients=count |
Explanation |
This message indicates that an client connection was dropped and identifies the client ID and the number of current client connections. |
Action |
No action is required for this informational message. |
AAS0123W | Service not defined |
Explanation |
A service definition has not been defined in this Adabas Administration Services implementation. |
Action |
No action is required for this informational message. |
AAS0125W | Client Access not defined |
Explanation |
A client access definition has not been defined in this Adabas Administration Services implementation. |
Action |
No action is required for this informational message. |
AAS0127I | Listening Port=port |
Explanation |
The listening port is given in the message. |
Action |
No action is required for this informational message. |
AAS0128I | Listening Port=port |
Explanation |
The listening port is given in the message. |
Action |
No action is required for this informational message. |
AAS0131I | ClientId=client-id Relaying to DBID=dbid |
Explanation |
The client named in the message is relaying data to the Adabas database identified in the message. |
Action |
No action is required for this informational message. |
AAS0132I | ClientId=client-id Local Calls to DBID=dbid |
Explanation |
The client named in the message is making local calls to the Adabas database identified in the message. |
Action |
No action is required for this informational message. |
AAS0133I | ClientId=client-id Host=hostname Port=port is a privileged client=client-id Current Clients=count |
Explanation |
The client on the host machine and port number listed in the message is a privileged client. |
Action |
No action is required for this informational message. |
AAS0150I | Service servicename connected via remote Service=servicename reference=refnum |
Explanation |
A service-to-service connection has occurred. If a service was started as a Windows service and subsequently shut down by means of the Services Control Panel, this informational message is added to the log. |
Action |
No action is required for this informational message. |
AAS0151I | DBID=dbid connected via remote Service=servicename reference=refnum |
Explanation |
A service-to-service connection has occurred and databases known to the remote service are now known to both. |
Action |
No action is required for this informational message. |
AAS0156I | DBID=dbid rejected for traffic relay |
Explanation |
A database was rejected for traffic relay, as defined by the service filter settings. The service will not process requests for the database with the database ID given in the message. |
Action |
No action is required for this informational message. |
AAS0158I | DBID=dbid verified and active reference=refnum |
Explanation |
During the periodic check of its known connections, the service has verified that its connection to the database listed in the message is valid and active. |
Action |
No action is required for this informational message. |
AAS0159I | DBID=dbid rejected by filter |
Explanation |
A e-business database was rejected by a filter, as defined by the service filter settings. The service will not process requests for the database with the database ID given in the message. |
Action |
No action is required for this informational message. |
AAS0163I | Adabas=dbid has been started |
Explanation |
The database listed in the message has been started. |
Action |
No action is required for this informational message. |
AAS0164I | Adabas=dbid has been stopped |
Explanation |
The database listed in the message has been stopped. |
Action |
No action is required for this informational message. |
AAS0203E | Connection from node rejected by filters; node in the rejected list |
Explanation |
An attempt to connect by the node referenced in the message was rejected by filters. The node is included in the rejected filter list. |
Action |
No action is necessary unless you want a connection by the node to be accepted. If you do, adjust the parameters on the Service Filters panel in SMH. |
AAS0208E | Unexpected error in registering database=dbid rc=rsp |
Explanation |
An unexpected error has occurred while registering the identified database; the return code is provided. |
Action |
Take corrective action as indicated by the following internal transport subsystem message. |
AAS0209E | Connection from node rejected by filters; node not in the accepted list |
Explanation |
An attempt to connect by the node referenced in the message was rejected by filters. The node is not included in the accepted filter list. |
Action |
No action is necessary unless you want a connection by the node to be accepted. If you do, adjust the parameters on the Service Filters panel in SMH. |
AAS0210E | ClientId=client-id Host=host Port=port rejected; Host not accepted by filter |
Explanation |
The client on the host machine and port listed in the message has been rejected because the host machine is not accepted by the filter settings. |
Action |
No action is necessary unless you want a connection to be accepted. If you do, adjust the parameters on the Service Filters panel in SMH. |
AAS0211E | e-Business database connecting with an invalid DBID=dbid |
Explanation |
An e-business database has connected to the service but has indicated a database number that is not in the valid range of 0 - 65535. |
Action |
Change the database ID to the valid range. |
AAS0212E | Unsolicited connection attempt from node being rejected |
Explanation |
A node with an unknown node name attempted to connect to the service while the SECURE parameter was set to ON. |
Action |
Define the node to Adabas Administration Services. |
AAS0213E | Host=hostname not accepted by filter |
Explanation |
The host machine listed in the message is not accepted by the filter settings. |
Action |
No action is necessary unless you want a connection to the host machine to be accepted. If you do, adjust the parameters on the Service Filters panel in SMH. |
AAS0215E | ART callback routine rc=rsp |
Explanation |
An error occurred in the Event Replicator Target Adapter callback routine. The response code is given in the message. |
Action |
Contact your Software AG technical support representative. |
AAS0216E | AAS callback routine rc=rsp |
Explanation |
An error occurred in the Adabas Administration Services callback routine. The response code is given in the message. |
Action |
Contact your Software AG technical support representative. |
AAS0217E | WCP callback routine rc=rsp |
Explanation |
An error occurred in the Entire Net-Work LUW callback routine. The response code is given in the message. |
Action |
Contact your Software AG technical support representative. |
AAS0218E | AAS callback routine rc=rsp |
Explanation |
An error occurred in the Adabas Administration Services callback routine. The response code is given in the message. |
Action |
Contact your Software AG technical support representative. |
AAS0219E | Relay callback routine for ClientId=client-id DBID=dbid zero length message |
Explanation |
A zero length message was received during a relay routine. |
Action |
If the problem persists, contact your Software AG support representative. |
AAS0220E | Local database started with an invalid identifier=dbid |
Explanation |
A local database has started with an ID of less than 1 or greater than 65535. The startup is being ignored and the database is inaccessible from this service. |
Action |
Check the database configuration files. |
AAS0221E | Local database is starting with a conflicting DBID=dbid |
Explanation |
A local database has started with an ID that is already in use by another database known to this service. The duplicate will be ignored. |
Action |
This indicated a configuration error that needs to be corrected. |
AAS0223E | Unexpected error in registering Service=servicename rc=rsp |
Explanation |
An internal error occurred registeringAdabas Administration Services. The response code is given in the message. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0228E | Adabas call to DBID=dbid failed rc=rsp |
Explanation |
An internal failure occurred during an Adabas call to a database. The database referenced in the Adabas call and the return code from the call are given in the message. |
Action |
Verify that the Adabas call is valid for the database. If the problem persists, contact your Software AG support representative. |
AAS0229E | Adabas ACBX call to DBID=dbid failed rc=rsp acbxrc=acbxrc acbxerrc=acbxerrc |
Explanation |
An internal failure occurred during an Adabas ACBX call to a database. The database referenced in the Adabas call, the return code from the call, the extended Adabas control block (ACBX) return code, and the ACBX error code are given in the message. |
Action |
Verify that the Adabas call is valid for the database. If the problem persists, contact your Software AG support representative. |
AAS0230E | Adabas ACBX call to DBID=dbid failed OP not secure acbxrc=acbxrc acbxerrc=acbxerrc |
Explanation |
An internal failure occurred during an Adabas ACBX call to a database because the OP command was not secure. The database referenced in the Adabas call, the extended Adabas control block (ACBX) return code, and the ACBX error code are given in the message. |
Action |
Verify that the Adabas call is valid for the database. If the problem persists, contact your Software AG support representative. |
AAS0231E | Adabas ACBX call to DBID=dbid failed No valid OP cmd acbxrc=acbxrc acbxerrc=acbxerrc |
Explanation |
An internal failure occurred during an Adabas ACBX call to a database because the OP command was not valid. The database referenced in the Adabas call, the extended Adabas control block (ACBX) return code, and the ACBX error code are given in the message. |
Action |
Verify that the Adabas call is valid for the database. If the problem persists, contact your Software AG support representative. |
AAS0232E | Invalid e-Business DBID=dbid; disconnecting .... |
Explanation |
An invalid Adabas DBID was encountered. Connections to the database are disconnected. |
Action |
If the error persists, contact your Software AG technical support representative. |
AAS0233E | Unknown e-business DBID=dbid; disconnected ... |
Explanation |
An unknown Adabas DBID was encountered and is disconnected. |
Action |
If the error persists, contact your Software AG technical support representative. |
AAS0235E | Unknown e-business Server=server-id |
Explanation |
An unknown server (identified in the message) was encountered. |
Action |
If the error persists, contact your Software AG technical support representative. |
AAS0237E | Unable to spawn a new process for xxxx |
Explanation |
The UNIX system is overloaded and will not allow the creation of new processes. |
Action |
Contact your Software AG technical support representative. |
AAS0238E | Syntax error in URL=url for target=target-id |
Explanation |
A syntax error occurred during Adabas Administration Services processing. The URL in error and the target ID for the URL are given in the message. This error can occur if manual updates to URL connection information are attempted. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0239E | EBZProxy callback routine for ClientId=client-id DBID=dbid completion rc=code |
Explanation |
A proxy error occurred. The client ID, database ID, and the return code from the attempt are given in the message. |
Action |
Make sure the proxy nodes are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0240E | EBZServer callback routine for ClientId=client-id DBID=dbid completion rc=code |
Explanation |
An Adabas Administration Services error occurred. The client ID, database ID and the return code from the attempt are given in the message. |
Action |
Make sure the Adabas Administration Services nodes are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0241E | EBZClient callback routine for ClientId=client-id DBID=dbid completion rc=code |
Explanation |
An Adabas Administration Services error occurred. The client ID, database ID and the return code from the attempt are given in the message. |
Action |
Make sure the Adabas Administration Services nodes are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0242E | Failed to relay request to ClientId=client-id DBID=dbid rc=code |
Explanation |
An attempt to relay a request to a database failed. The database ID and the return code from the attempt are given in the message. |
Action |
Make sure the Adabas Administration Services nodes and the database in question are all up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0243E | ACBX request for Classic DBID=dbid is not supported |
Explanation |
An attempt to make an Adabas ACBX call to a classic (pre-Version 6 on open systems or pre-Version 8 on mainframe systems) Adabas database was made. ACBX calls are only allowed against Adabas 8 (or later) databases. |
Action |
Resolve the error (either run the ACBX call against a valid database or change the call to an ACB call) and try again. |
AAS0245E | DBID=dbid is invalid; request rejected |
Explanation |
A request was made to an invalid database. |
Action |
Correct the database specification and try again. |
AAS0246E | DBID=dbid is inactive; request rejected |
Explanation |
A request was made to an inactive Adabas database. |
Action |
Start the Adabas database and try again. |
AAS0247E | DBID=dbid Invalid or deleted context=context-id; request rejected |
Explanation |
A communication error occurred. The request is rejected. The database ID of the database to which the request was directed is given in the message. |
Action |
Verify that all connections and the database in question are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0248E | Outbound connection failure; unknown target |
Explanation |
An outbound connection was attempted but failed because the target could not be identified.. |
Action |
Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0249E | Invalid DBID=dbid, no corresponding Service defined |
Explanation |
A communication error occurred. The request is rejected. The database ID of the database to which the request was directed is given in the message. |
Action |
Verify that all connections and the database in question are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0251E | Unknown request ClientId=client-id DBID=dbid, disconnecting ... |
Explanation |
An unknown client request was encountered. The client ID and Adabas database ID are given in the message. |
Action |
Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0252E | ClientId=client-id Host=hostname Port=port rejected; The Number of client connections cannot exceed=count |
Explanation |
A client request was not processed because the number client connections has been exceeded. The client ID, host name, port number, and maximum number of client connections are given in the message. |
Action |
Verify that the maximum number of client connections is set correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0253E | Replying to ClientId=client-id DBID=dbid failed rc=code |
Explanation |
An attempt to reply to a client failed. The client ID, Adabas database ID, and return code from the attempt are given in the message. |
Action |
Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0254E | ClientId=client-id Host=hostname Port=port rejected; The CPU Threshold=percentage exceeds maximum allowed=value |
Explanation |
The client on the host machine and port listed in the message was rejected because the CPU threshold was exceeded. |
Action |
Increase the CPU threshold setting. If the problem persists, contact your Software AG support representative for assistance. |
AAS0255E | ClientId=client-id DBID=dbid Replying error=error |
Explanation |
An attempt to reply to a client failed. The client ID, Adabas database ID, and error from the attempt are given in the message. |
Action |
Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0256E | DBID=dbid is non accessible mainframe database; client traffic not allowed |
Explanation |
An attempt to connect to a mainframe database failed. The Adabas database ID is given in the message. |
Action |
Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0258E | Context=context DBID=dbid set for deletion; request rejected |
Explanation |
An attempt to delete the Adabas context listed in the message for the database listed in the message failed. |
Action |
Verify that all connections are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0304S | Unable to add a Directory Server entry |
Explanation |
The Adabas Administration Services was unable to add a Directory Server entry. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0305S | AIF exit error=error |
Explanation |
An AIF exit error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0310S | Work Semaphore failed in thread thread-number, error=error-number |
Explanation |
The Adabas Administration Services threading mechanism failed. |
Action |
Repeated occurrences of this message may require a restart of the service. |
AAS0311S | Threading yield: failed in thread thread-number, error=error-number |
Explanation |
The Adabas Administration Services threading mechanism failed. |
Action |
Repeated occurrences of this message may require a restart of the service. |
AAS0312S | Invalid message eyecatcher received |
Explanation |
An internal Adabas Administration Services error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0313S | Invalid message version received |
Explanation |
An internal Adabas Administration Services error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0314S | Invalid message segment received |
Explanation |
An internal Adabas Administration Services error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0315S | Request failed to wake work semaphore rc=rccode |
Explanation |
The Adabas Administration Services semaphoring mechanism failed. The return code from the call is given in the message. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0316S | Thread wakeup call failed rc=rccode |
Explanation |
The Adabas Administration Services threading mechanism failed. The return code from the call is given in the message. |
Action |
Repeated occurrences of this message may require a restart of the service. |
AAS0317S | Unable to remove Directory Service Server=serverid Url=url |
Explanation |
An internal error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0318S | Local database resources problem. Increase NU parameter |
Explanation |
An internal error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0319S | Unable to remove Directory Service Dbid=dbid Url=url |
Explanation |
An internal error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0402F | Unable to continue due to a severe error at startup |
Explanation |
A severe error occurred when the Adabas Administration Services tried to start up. The cause is shown in a previous message. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0407F | Thread create for TimerThread failed rc=rccode |
Explanation |
The threading mechanism failed. The return code is given in the message. |
Action |
Repeated occurrences of this message may require a restart of the service. |
AAS0408F | Semaphore for WorkSemaphore failed rc=rccode |
Explanation |
The threading mechanism failed. The return code is given in the message. |
Action |
Repeated occurrences of this message may require a restart of the service. |
AAS0409F | Thread create for thread thread-number failed rc=rccode |
Explanation |
The threading mechanism failed. The return code is given in the message. |
Action |
Repeated occurrences of this message may require a restart of the service. |
AAS0414F | Remote Directory Server cannot be accessed |
Explanation |
Adabas Administration Services could not access the remote Software AG Directory Server. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0415F | CFG Directory Server cannot be accessed |
Explanation |
A Directory Server problem occurred. |
Action |
Make sure no Directory Server or Adabas Administration Services installation files were deleted and that your user ID has security access to use all files in the installation directories. If the problem persists, contact your Software AG support representative for assistance. |
AAS0601E | Internal error=errorcode |
Explanation |
An internal error occurred. The error code is given in the message. |
Action |
Analyze the error description to try to identify and resolve the problem. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0602E | Node is unreachable. It may not be active or there may be a configuration problem. Detailed error response was: response |
Explanation |
A node cannot be reached. The response from the connection attempt is given in the message. |
Action |
Verify that the node is started. If it is, analyze the installation of the node to identify and resolve any configuration problem that may exist. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0603E | Service=service-id already exists in the Directory Server |
Explanation |
An attempt to add a service to the System Management Hub (SMH) was made, but the service already is added. |
Action |
No action is required for this informational message. |
AAS0604I | definition successfully added to SMH management; refreshing the tree... |
Explanation |
The definition listed in the message was successfully added to SMH. |
Action |
No action is required for this informational message. |
AAS0605E | Service=service-id not found in the Directory Server |
Explanation |
The service listed in the message was not found in the Adabas Directory Server. |
Action |
If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance. |
AAS0606I | definition successfully deleted from SMH management; refreshing the tree... |
Explanation |
The definition listed in the message was successfully deleted from SMH. |
Action |
No action is required for this informational message. |
AAS0607E | No client entries found |
Explanation |
No client configuration definitions were found to manage in the System Management Hub (SMH). |
Action |
Verify that the client service is started. Client configuration definitions cannot be reviewed in the System Management Hub (SMH) unless the client service is started. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0608E | No service definitions found in the Directory Server |
Explanation |
No service definitions were found in the Adabas Directory Server, so no server machines can be listed in the System Management Hub (SMH). |
Action |
Verify that Adabas Administration Services has been installed and that its service has been started. |
AAS0609E | Incompatible version of Net-Work |
Explanation |
The version of Adabas Administration Services you are trying to use is incompatible with the Adabas Administration Services SMH agent. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0610I | Ping request returned in number milliseconds |
Explanation |
The ping request was returned in the number of milliseconds listed in the message. |
Action |
No action is required for this informational message. |
AAS0611I | No databases found on Service=service-id |
Explanation |
No databases were found on the service listed in the message. |
Action |
No action is required for this informational message. |
AAS0612E | Service is unreachable rc=rccode |
Explanation |
An error occurred during an attempt to communicate with a node. The return code is given in the message. |
Action |
Use the return code to determine what the problem is and resolve it. Then try again. If the problem persists, contact your Software AG technical support representative. |
AAS0613I | No adjacent services found on Service=service-id |
Explanation |
No connection were made. Either the service is down or there is a configuration error. |
Action |
No action is required for this informational message. |
AAS0614I | No clients found on Service=service-id |
Explanation |
No clients were found on the service listed in the message. |
Action |
No action is required for this informational message. |
AAS0615I | No hosts connected to Service=service-id found |
Explanation |
No hosts were found connected to the service listed in the message. |
Action |
No action is required for this informational message. |
AAS0616I | Shutdown initiated |
Explanation |
Shutdown processing has been started. |
Action |
No action is required for this informational message. |
AAS0617I | No such configuration |
Explanation |
A configuration was referenced that does not exist. |
Action |
No action is required for this informational message. |
AAS0618E | Return code rc received |
Explanation |
The return code listed in the message was received during Adabas Administration Services processing. |
Action |
Analyze the return code to see if you can diagnose and resolve the problem. If the problem persists, contact your Software AG technical support representative. |
AAS0619E | Invalid context |
Explanation |
An invalid context was encountered. |
Action |
Verify that all connections and the database in question are up and configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0620E | Invalid Client |
Explanation |
An invalid client was encountered. |
Action |
Verify that all clients are configured correctly. If the problem persists, contact your Software AG support representative for assistance. |
AAS0621I | New log file started |
Explanation |
A new log file has been started. |
Action |
No action is required for this informational message. |
AAS0622I | Trace level set |
Explanation |
A new trace level has been set. |
Action |
No action is required for this informational message. |
AAS0623I | Stats level set |
Explanation |
A new statistics level has been set. |
Action |
No action is required for this informational message. |
AAS0624I | Dump configuration initiated |
Explanation |
A dump configuration has been initiated. |
Action |
No action is required for this informational message. |
AAS0625E | Invalid DBID |
Explanation |
An invalid Adabas database ID has been specified. |
Action |
Specify a correct database ID. |
AAS0626E | Invalid Host |
Explanation |
An invalid host was specified. |
Action |
Specify a valid host name. |
AAS0627E | Directory Server is unreachable. It may not be active or there may be a configuration problem. Detailed error response was: error |
Explanation |
A problem occurred during an attempt to communicate with the Adabas Directory Server. |
Action |
Verify that the Adabas Directory Server is stated and try again. If the problem persists, contact your Software AG technical support representative. |
AAS0628I | Connect procedure has been initiated |
Explanation |
A connection attempt was started. |
Action |
No action is required for this informational message. |
AAS0629I | Disconnect procedure has been initiated |
Explanation |
A disconnection attempt was started. |
Action |
No action is required for this informational message. |
AAS0630I | Delete procedure successful |
Explanation |
The deletion attempt was successful. |
Action |
No action is required for this informational message. |
AAS0631E | Invalid Node |
Explanation |
An attempt was made connect to an invalid node. |
Action |
Refresh your SMH screens. The node was probably deleted since you started your SMH session. |
AAS0632E | Service already connected |
Explanation |
An attempt occurred to connect to a service that is already connected. |
Action |
If you are having problems communicating with the service and you are getting this error, contact your Software AG technical support representative for assistance. |
AAS0633E | Service already disconnected |
Explanation |
An attempt was made to disconnect a service that is already disconnected. |
Action |
No action is required for this information message. |
AAS0634E | Unknown return code rccode received |
Explanation |
An unknown return code was received. The return code is given in the message. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0635E | XTS library cannot be loaded |
Explanation |
The Software AG Transport Subsystem library could not be loaded. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0636E | Configuration already defined |
Explanation |
An attempt was made to configure a service that is already configured. |
Action |
Try specifying a different service name for the servuce you are allocating. If the problem persists, contact your Software AG technical support representative. |
AAS0637E | Invalid request |
Explanation |
An invalid request was attempted. |
Action |
If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance. |
AAS0638E | Failure to create file |
Explanation |
An attempt to create a file was unsuccessful. |
Action |
If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance. |
AAS0639E | Unknown command code cmd-code received |
Explanation |
An unknown command request was received. The command code is given in the message. |
Action |
If you cannot identify and resolve the problem, contact your Software AG technical support representative for assistance. |
AAS0640I | Service servicename configured successfully |
Explanation |
The service definition configuration attempt was successful. The service definition name is given in the message. |
Action |
No action is required for this informational message. |
AAS0641I | Client name configured successfully |
Explanation |
The client configuration attempt was successful. The client configuration name is given in the message. |
Action |
No action is required for this informational message. |
AAS0642I | Migrating service-id Service successful |
Explanation |
An attempt to migrate a service definition from an older version of Adabas Administration Services to a newer version was successful. The name of the service is given in the message. |
Action |
No action is required for this informational message. |
AAS0643I | Service service-id migrated from WCP73 |
Explanation |
The service listed in the message has been migrated from a previous version. |
Action |
No action is required for this informational message. |
AAS0644E | Invalid entry |
Explanation |
An invalid entry was specified. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0645I | Modification procedure successful |
Explanation |
The modification was successful. |
Action |
No action is required for this informational message. |
AAS0646E | Invalid data |
Explanation |
Invalid data was specified. |
Action |
Correct the data and try again. If the problem persists, contact your Software AG technical support representative. |
AAS0647I | Client name deleted successfully |
Explanation |
The attempt to delete the client configuration was successful. |
Action |
No action is required for this informational message. |
AAS0648I | Service name deleted successfully |
Explanation |
The attempt to delete the service definition was successful. |
Action |
No action is required for this informational message. |
AAS0649I | Service name is active, deletion failed |
Explanation |
An attempt to delete a service definition was made, but the service is running. |
Action |
Stop the service before attempting to delete it. |
AAS0650I | Service name is active, starting not initiated |
Explanation |
An attempt to start a service was made, but the service is already running. |
Action |
No action is required for this informational message. |
AAS0651I | Startup initiated for Service name |
Explanation |
The service is starting. |
Action |
No action is required for this informational message. |
AAS0652I | Unable to start this Service |
Explanation |
The Keservicernel cannot be started for some reason. |
Action |
Examine the service log file for reasons for the failure, make appropriate corrections, and try again. If the error persists, contact your Software AG technical support representative for assistance. |
AAS0653I | Set parameters successful |
Explanation |
The parameter changes were successfully processed. |
Action |
No action is required for this informational message. |
AAS0654I | No services available |
Explanation |
No service definitions have been defined, so none are available. |
Action |
Define some service definitions. |
AAS0655I | Client client-id migrated from WCL13 |
Explanation |
The client listed in the message has been migrated from a previous version of Entire Net-Work. |
Action |
No action is required for this informational message. |
AAS0656E | Service=name cannot have more then 8 characters |
Explanation |
The name of a service definition cannot exceed eight characters. An attempt was made to specify a name longer than eight characters and the name specified is given in the message. |
Action |
Reduce the length of the name of the service definition. |
AAS0657E | XTS function cannot be loaded |
Explanation |
An internal error occurred. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0658E | A valid (non-zero) port has to be specified |
Explanation |
The port number was not specified or is invalid. |
Action |
Specify a valid port number. |
AAS0659E | A valid (non-zero) host has to be specified |
Explanation |
A host name was not specified or is invalid. |
Action |
Specify a valid host name. |
AAS0660E | Data segment unknown=data |
Explanation |
Data received by the SMH agents is not recognized. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0670E | No URL available in the Directory Server for the target server |
Explanation |
An internal error occurred in a Directory Server definition. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0671E | Adabas Administration Service=service-id has to be unique across the network |
Explanation |
The name of a service must be unique across the network. A name that has already been used was specified. |
Action |
Change the service name so it is unique. |
AAS0672I | Default client cannot be deleted |
Explanation |
You cannot delete the default client configuration that is distributed with Adabas Administration Services. |
Action |
No action is required. |
AAS0673E | DBID syntax error; follow this rule : n1 or n1,n2 or n1-n2, or n1,n2,n2,n4-n5 |
Explanation |
The list of databases was not specified correctly. The syntax for a list of databases is given in the message. |
Action |
Correct the list of databases. |
AAS0674E | Trace syntax error; follow this rule : nnnnn or 0xnnnn |
Explanation |
The trace information was not specified correctly. The correct syntax for trace information is given in the message. |
Action |
Correct the trace information. |
AAS0675E | UNSOLICITED values are YES or NO |
Explanation |
An invalid value for the UNSOLICITED parameter was specified. Valid values are "YES" or "NO". |
Action |
Specify a valid value for the parameter. |
AAS0676E | Adabas timeout cannot be less then 5 seconds |
Explanation |
An invalid value was specified for the ADABAS_TIMEOUT parameter. The value cannot be less than 5 seconds. |
Action |
Specify a valid value for the parameter. |
AAS0677I | Command sent to Service service-id |
Explanation |
The command was sent to the service listed in the message. |
Action |
No action is required for this informational message. |
AAS0678E | The timer timeout has to be between 1 and 3600 seconds |
Explanation |
An invalid value was specified for the TIMER_TIMEOUT parameter. The value must be between 1 and 3600 seconds. |
Action |
Specify a valid value for the parameter. |
AAS0679E | The statistics logging period has to be between 1 and 1440 minutes |
Explanation |
An invalid value was specified for the STATISTICS_INTERVAL parameter. The value must be between 1 and 1440 minutes. |
Action |
Specify a valid value for the parameter. |
AAS0680E | The log size value has to be between 1MB and 500MB |
Explanation |
An invalid value was specified for the LOGSIZE parameter. The value must be between 1 and 500 megabytes. |
Action |
Specify a valid value for the parameter. |
AAS0681E | The remote check period has to be between 0 and 1440 minutes |
Explanation |
An invalid value was specified for the PING_DB_INTERVAL parameter. The value must be between 1 and 1440 minutes. |
Action |
Specify a valid value for the parameter. |
AAS0682E | The local check period has to be between 5 and 600 seconds |
Explanation |
An invalid value was specified for the CHECK_DBS_INTERVAL parameter. The value must be between 5 and 600 seconds. |
Action |
Specify a valid value for the parameter. |
AAS0683E | Port=port value has to be between 0 and 65535 |
Explanation |
An invalid port number was specified. |
Action |
Specify a valid port number. |
AAS0684E | Service ID value has to be between 1 and 65535 |
Explanation |
An invalid value was specified for the service ID. The value must be between 1 and 65535. |
Action |
Specify a valid service ID. |
AAS0685E | Client name=name cannot have more then 16 characters |
Explanation |
An invalid client configuration name was specified. The client configuration name cannot exceed 16 characters. |
Action |
Specify a valid client configuration name. |
AAS0686E | Relay values are YES or NO |
Explanation |
An invalid value was specified for the RELAY_VALUES parameter. Valid values are "YES" or "NO". |
Action |
Specify a valid value for the parameter. |
AAS0687E | Port=port value has to be between 1 and 65535 |
Explanation |
An invalid port number was specified. Valid values must lie between "1" and "65535". |
Action |
Correct the port number and try again. |
AAS0689E | Port=port string is not numerical |
Explanation |
An invalid port number was specified. |
Action |
Specify a valid port number. |
AAS0690E | Numerical values required for parameter=parameter-name |
Explanation |
A non-numeric value was specified for a parameter when a numeric value is expected. The parameter name is given in the message. |
Action |
Specify a valid value for the parameter. |
AAS0691E | AUTOSTART/AUTOSTOP values are YES or NO |
Explanation |
An invalid value was specified for the AUTOSTART or AUTOSTOP parameters. Valid values are "YES" or "NO". |
Action |
Specify a valid value for the parameter. |
AAS0692E | No entry found in Directory Server |
Explanation |
No entry definitions were found to manage in the Adabas Directory Server and, consequently, in the System Management Hub (SMH). |
Action |
Verify that the service for Adabas Administration Services is started. Service definitions cannot be reviewed in the System Management Hub (SMH) unless the server service is started. |
AAS0693E | No Net-Work 7.X.X found in Directory Server |
Explanation |
No Entire Net-Work 7.2 node definitions were found to manage in the Adabas Directory Server and, consequently, in the System Management Hub (SMH). |
Action |
If you have any Entire Net-Work 7.2 nodes to be managed, you must first add them in SMH. |
WCP0693E | No Net-Work 7.X.X found in Directory Server |
Explanation |
No Entire Net-Work 7.2 node definitions were found to manage in the Adabas Directory Server and, consequently, in the System Management Hub (SMH). |
Action |
If you have any Entire Net-Work 7.2 nodes to be managed, you must first add them in SMH. |
AAS0694E | The DBID has to be between 1 and 65535 |
Explanation |
An invalid Adabas database ID was specified. Valid database IDs are between 1 and 65535. |
Action |
Specify a valid database ID. |
AAS0695E | Service=name should not include the #. []=\\* characters |
Explanation |
The name of a service definition was specified with one of the special characters listed in the message. |
Action |
Specify a valid service definition name. |
WCP0695E | Kernel=name should not include the # . [ ] = \ \ * characters |
Explanation |
The name of a Kernel definition was specified with one of the special characters listed in the message. These characters cannot be used in a Kernel definition name. |
Action |
Specify a valid Kernel definition name. |
AAS0696E | Client name should not include the #. []=\\* characters |
Explanation |
The name of a client configuration was specified with one of the special characters listed in the message. These characters cannot be used in a client configuration name. |
Action |
Specify a valid client configuration name. |
AAS0697E | The WCP72 Service does not appear to be local |
Explanation |
The Entire Net-Work 7.2 node cannot be found and does not appear to be installed on the local machine. |
Action |
Correct the Entire Net-Work 7.2 node definition in SMH to point to the correct host machine. |
AAS0698E | Duplication |
Explanation |
An attempt to add a definition that has already been added. The definition you tried to add is not added. |
Action |
No action is required for this informational message. |
AAS0699E | Service file does not exist (it could be deleted) |
Explanation |
An attempt to delete a service failed; it is possible that it was already deleted. |
Action |
No action is required for this informational message. |
AAS0700E | No entries found |
Explanation |
No definitions were found to manage in the System Management Hub (SMH). |
Action |
Verify that the service for Adabas Administration Services is started. Kernel definitions cannot be reviewed in the System Management Hub (SMH) unless the server service is started. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0701E | No Server entries found |
Explanation |
No Adabas Administration Services entries were found to manage in the System Management Hub (SMH). |
Action |
Verify that the service for Adabas Administration Services is started. Service definitions cannot be reviewed in the System Management Hub (SMH) unless the Adabas Administration Services service is started. For more information, read Starting and Stopping Adabas Administration Services in your Adabas Administration Services documentation. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0702E | Service=servicename name cannot be numeric only |
Explanation |
The service name cannot contain only numeric values. |
Action |
Specify a valid service name. |
AAS0703E | Client name=client-id cannot be numeric only |
Explanation |
The client name cannot contain only numeric values. |
Action |
Specify a valid client name. |
AAS0704W | No such entry in the Directory Server, please refresh! |
Explanation |
An attempt to reference an entry in the Directory Server failed. |
Action |
Refresh your SMH display to obtain the latest Directory Server entries. |
AAS0705E | Port value has to be between 1 and 65535 |
Explanation |
An invalid port number was specified. |
Action |
Specify a valid port number. For more information, read Port Number Reference, elsewhere in this documentation. |
AAS0706E | Retry string not numerical |
Explanation |
The retry count specification was not numeric. |
Action |
Specify a numeric retry count. |
AAS0707E | Retry interval string not numerical |
Explanation |
The retry interval specification was not numeric. |
Action |
Specify a numeric retry interval. |
AAS0708E | Host Name=name should not include the # []=\\* characters |
Explanation |
The host name was specified with one of the special characters listed in the message. These characters cannot be used in a host name. |
Action |
Specify a valid host name. |
AAS0709I | No additional parameters supplied |
Explanation |
No additional parameters were supplied for the Adabas Administration Services configuration. |
Action |
No action is required for this informational message. |
AAS0710E | Port=port value has to be between 1 and 65535 |
Explanation |
An invalid port number was specified. |
Action |
Specify a valid port number. For more information, read Port Number Reference, elsewhere in this documentation. |
AAS0711E | Port2=port2 has to be greater than Port1=port1 |
Explanation |
When specifying a range of port numbers, the second port number should be larger than the first port number in the range. The port numbers specified are given in the message. |
Action |
Specify a valid range of port numbers. |
AAS0713E | DBID=dbid string is not numerical |
Explanation |
The Adabas database ID specified was not numeric. |
Action |
Specify a numeric database ID. |
AAS0714E | DBID2=dbid2 has to be greater than DBID1=dbid1 |
Explanation |
When specifying a range of Adabas database IDs, the second database ID should be larger than the first database ID in the range. The database IDs specified are given in the message. |
Action |
Specify a valid range of database IDs. |
AAS0715E | Empty string |
Explanation |
A blank string was specified for a parameter. |
Action |
Specify a valid value for the parameter. |
AAS0716E | At least one access definition has to be selected |
Explanation |
An attempt to add an access definition was made but no access type was selected (for example, Classic, e-business Client, e-business SSL Client, etc.). |
Action |
Select an access type when adding an access definition. |
AAS0717I | No listens found on Service=service-id |
Explanation |
No active access entries were found for the active service. |
Action |
No action is required for this informational message. |
AAS0718I | No connections found on Service=service-id |
Explanation |
No active connection entries were found for the active service. |
Action |
No action is required for this informational message. |
AAS0719E | REMEMBER_DBID values are YES or NO |
Explanation |
An invalid value was specified for the REMEMBER_DBID parameter. Valid values are "YES" or "NO". |
Action |
Specify a valid value for the parameter. |
AAS0720E | The number of active clients has to be between 5 and 65535 |
Explanation |
An invalid value was specified for the MAX_CLIENTS parameter. Valid values must be between 5 and 65535. |
Action |
Specify a valid value for the parameter. |
AAS0721E | Timeout error; check if the Service is down |
Explanation |
A system timeout error occurred. |
Action |
Verify that the service is not down. If it is, restart it. If the problem persists, contact your Software AG technical support representative. |
AAS0722E | DBID=dbid not defined |
Explanation |
An Adabas database ID was not specified or an invalid one was specified. |
Action |
Specify a valid database ID. |
AAS0723E | DBID=dbid not active |
Explanation |
The Adabas database is not active. |
Action |
Start the database. |
AAS0724E | Service=service-id not defined |
Explanation |
An attempt was made to ping a service, but the service does not exist. |
Action |
Refresh your System Management Hub displays. The node may have been deleted since you started this SMH session. |
AAS0725E | Service=service-id not active |
Explanation |
An attempt was made to ping a service, but the service was not active. |
Action |
Start the node if you wish. |
AAS0726E | No entry available |
Explanation |
An attempt was made to review an entry that is no longer available. |
Action |
Refresh your System Management Hub displays. The entry may have been deleted since you started this SMH session. |
AAS0727E | Empty Service name |
Explanation |
No service definition name was specified. |
Action |
Specify a valid service definition name. |
AAS0728E | Empty Client name |
Explanation |
No client configuration name was specified. |
Action |
Specify a valid client configuration name. |
AAS0729E | Empty Host name |
Explanation |
No host name was specified. |
Action |
Specify a valid host name. |
AAS0730E | Empty DBID string |
Explanation |
No Adabas database ID was specified. |
Action |
Specify at least one database ID. |
AAS0731E | Empty Port string |
Explanation |
No port number was specified. |
Action |
Specify a valid port number. For more information, read Port Number Reference, elsewhere in this documentation. |
AAS0732E | No Client definitions found in the Directory Server |
Explanation |
No client configuration definitions were found in the Adabas Directory Server. |
Action |
Verify that the service for Adabas Administration Services is started. Client configuration definitions cannot be reviewed in the System Management Hub (SMH) unless the service is started. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0733E | Connection URL syntax error |
Explanation |
A syntax error exists in a connection URL. Entire Net-Work cannot make the connection. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0734E | Connection with the same NODENAME already defined |
Explanation |
An attempt was made to define a connection to the same node twice. Only one connection definition is needed. |
Action |
Make sure that there is only one connection definition for the node. |
AAS0735E | Host Name=hostname not defined in DNS |
Explanation |
The host identified in the message is not defined in the DNS. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0736E | Host Name=hostname not defined in DNS |
Explanation |
The host identified in the message is not defined in the DNS. |
Action |
Contact your Software AG technical support representative for assistance. |
AAS0738E | Target is down or not defined in the Directory Server |
Explanation |
A connection attempt was made to a target that is not correctly defined to Adabas Administration Services. |
Action |
Verify that the target definition is correct and complete (no required parameters are undefined) and try again. If the error persists, contact you Software AG technical support representative for assistance. |
AAS0739E | Incoming Service already connected |
Explanation |
An attempt was made to define two connections for the same incoming service. Only one connection definition is needed. |
Action |
Make sure that only one connection definition exists for the incoming service. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0740E | Connection failure; reason=rsncode |
Explanation |
An attempt to make a defined connection failed. The reason code is given in the message. |
Action |
Analyze the reason code and try to resolve the problem. If the problem persists, contact your Software AG technical support representative for assistance. |
AAS0741E | The SERVICE_THREADS value has to be between 5 and 1024 |
Explanation |
The value of the SERVICE_THREADS parameter is not correct. It must be a numeric value between 5 and 1024. |
Action |
Correct the value and try again. |
AAS0742E | No data available |
Explanation |
The service log file cannot be found. |
Action |
Contact your Software AG technical support representative. |
AAS0743E | MULTIPLEX values are YES or NO |
Explanation |
An invalid value was specified for the MULTIPLEX parameter. Valid values are "YES" or "NO". |
Action |
Correct the value and try again. |
AAS0744E | NOLOCAL values are YES or NO |
Explanation |
An invalid value was specified for the NOLOCAL parameter. Valid values are "YES" or "NO". |
Action |
Correct the value and try again. |
AAS0745E | NOREMOTE values are YES or NO |
Explanation |
An invalid value was specified for the NOREMOTE parameter. Valid values are "YES" or "NO". |
Action |
Correct the value and try again. |
AAS0746E | LOAD BALANCING values are YES or NO |
Explanation |
An invalid value was specified for the LOAD_BALANCING parameter. Valid values are "YES" or "NO". |
Action |
Correct the value and try again. |
AAS0747E | The maximum CPU threshold has to be between 10 and 99 |
Explanation |
An invalid value has been specified for the MAX_CPU_THRESHOLD parameter. |
Action |
Correct the value and try again. |
AAS0749E | STATISTICS_DETAILS values are YES or NO |
Explanation |
An invalid value was specified for the STATISTICS_DETAILS parameter. Valid values are "YES" or "NO". |
Action |
Correct the value and try again. |
AAS0750E | USE_LOCAL_ADABASES values are YES or NO |
Explanation |
An invalid value was specified for the USE_LOCAL_ADABASES parameter. Valid values are "YES" or "NO". |
Action |
Correct the value and try again. |
AAS0751E | Service=service-id is not set to process local databases |
Explanation |
The service listed in the message is not defined to process local databases. |
Action |
Correct the USE_LOCAL_ADABASES parameter value in the service definition and try again. |
AAS0752E | DATE_STAMP values are YES or NO |
Explanation |
An invalid value was specified for the DATE_STAMP parameter. Valid values are "YES" or "NO". |
Action |
Correct the value and try again. |
AAS0753E | The CHECK_CXT_INTERVAL value has to be 0 or between 60 and 24*60*30 seconds |
Explanation |
An invalid value was specified for the CHECK_CXT_INTERVAL parameter. Valid values are zero (0) seconds or lie between 60 seconds and 43,200 seconds (24 * 60 * 30). |
Action |
Correct the value and try again. |
AAS0754I | Service service-id migrated from WCP74 |
Explanation |
The service listed in the message was successfully migrated from the 7.4 version of Entire Net-Work. |
Action |
No action is required for this informational message. |
AAS0755I | Client client-id migrated from WCL14 |
Explanation |
The client listed in the message was successfully migrated from the 1.4 version of Entire Net-Work Client. |
Action |
No action is required for this informational message. |
AAS0756E | DBID=dbid not accessible |
Explanation |
The database listed in the message could not be accessed. |
Action |
No action is required for this informational message. |