Errors Common to All Utilities

Overview of Messages

ERROR-001 | ERROR-002 | ERROR-003 | ERROR-004 | ERROR-005 | ERROR-006 | ERROR-007 | ERROR-008 | ERROR-009 | ERROR-010 | ERROR-011 | ERROR-012 | ERROR-013 | ERROR-014 | ERROR-015 | ERROR-016 | ERROR-017 | ERROR-018 | ERROR-019 | ERROR-020 | ERROR-021 | ERROR-022 | ERROR-023 | ERROR-024 | ERROR-025 | ERROR-026 | ERROR-027 | ERROR-028 | ERROR-029 | ERROR-030 | ERROR-031 | ERROR-032 | ERROR-033 | ERROR-034 | ERROR-035 | ERROR-036 | ERROR-037 | ERROR-038 | ERROR-039 | ERROR-040 | ERROR-041 | ERROR-042 | ERROR-043 | ERROR-044 | ERROR-045 | ERROR-046 | ERROR-047 | ERROR-048 | ERROR-049 | ERROR-051 | ERROR-052 | ERROR-053 | ERROR-054 | ERROR-055 | ERROR-057 | ERROR-058 | ERROR-059 | ERROR-060 | ERROR-062 | ERROR-064 | ERROR-065 | ERROR-066 | ERROR-067 | ERROR-068 | ERROR-069 | ERROR-070 | ERROR-071 | ERROR-072 | ERROR-073 | ERROR-074 | ERROR-075 | ERROR-076 | ERROR-077 | ERROR-078 | ERROR-079 | ERROR-080 | ERROR-081 | ERROR-084 | ERROR-085 | ERROR-086 | ERROR-087 | ERROR-088 | ERROR-089 | ERROR-090 | ERROR-091 | ERROR-092 | ERROR-093 | ERROR-094 | ERROR-098 | ERROR-099 | ERROR-101 | ERROR-102 | ERROR-103 | ERROR-104 | ERROR-105 | ERROR-106 | ERROR-107 | ERROR-108 | ERROR-109 | ERROR-110 | ERROR-111 | ERROR-112 | ERROR-113 | ERROR-114 | ERROR-115 | ERROR-116 | ERROR-117 | ERROR-118 | ERROR-120
ERROR-001 Error occurred during opening input file DDKARTE : reason
Explanation

The cause is probably a misspelled keyword.
Action

Check the JCL; correct the error and rerun the job.
ERROR-002 I/O error occurred during read on file DDKARTE : reason
Explanation

The cause is probably a misspelled keyword.
Action

Check the JCL; correct the error and rerun the job.
ERROR-003 Parameter error, invalid utility name
Explanation

The cause is probably a misspelled keyword.
Action

Check the parameter input; correct the error and rerun the job.
ERROR-004 Parameter error, missing separator
Action

Correct the parameter error or supply the missing separator. Rerun the job.

ERROR-005 Parameter error, invalid syntax
Action

Supply the correct parameter value and rerun the job.
ERROR-006 Parameter error, keyword not unique
Action

Check the parameter input; supply the correct keyword in full length and rerun the job.

ERROR-007 Parameter error, unknown parameter
Explanation

The cause is probably a misspelled keyword.
Action

Check the parameter input; correct the error and rerun the job.
ERROR-008 Parameter error, unknown function
Explanation

The cause is probably a misspelled keyword.
Action

Check the parameter input; correct the error and rerun the job.
ERROR-009 Parameter error, too many values in a list
Action

Check the parameter input. Supply no more than the maximum number of parameter values permitted, and rerun the job.

ERROR-010 Invalid or missing level number
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-011 Invalid or missing field length
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-012 Missing `=' (equal sign)
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-013 Invalid or missing field option
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-014 Missing `(' (left parenthesis)
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-015 Missing `)' (right parenthesis)
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-016 Invalid or missing start position
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-017 Invalid or missing end position
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-018 More than one parent for sub-field/descriptor
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-019 More than 20 parents for super-field/descriptor
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-020 Only one parent for super-field/descriptor
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-021 Syntax error, invalid character found
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-022 Invalid or missing hyperdescriptor exit number or collating exit number
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-023 No or more than 20 parents for a hyperdescriptor
Action

See the ADACMP discussion in the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-024 Invalid field name
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-025 Reserved field name used
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-026 Invalid field format specification
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-027 Invalid or conflicting field options used
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-028 Invalid MU/PE repeat factor
Action

See the Adabas Utilities documentation for more information about field definition syntax. Correct the error and rerun the job.

ERROR-029 Multiple function keywords detected
Explanation

This utility performs only one function per execution.
Action

Check the parameter input; correct the error and rerun the job.
ERROR-030 Error occurred during execution of open ASSO : reason
Explanation

The cause is probably incorrect JCL (DDASSOR1, ..., DDASSOR5) or an inconsistent database.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-031 Error occurred during execution of read ASSO : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-032 Error occurred during execution of write ASSO : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.

Note:
If this error occurs in a BS2000 environment when running ADAFRM, please check that the size of the container is track-rounded. For more information, read Splitting Data Sets Across Volumes under BS2000 Device Types and Block Sizes.

ERROR-033 Error occurred during execution of close ASSO : reason
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-034 Error occurred during execution of open DATA : reason
Explanation

The cause is probably incorrect JCL (DDDATAR1, ..., DDDATAR5) or an inconsistent database.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-035 Error occurred during execution of read DATA : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-036 Error occurred during execution of write DATA : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-037 Error occurred during execution of close DATA : reason
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-038 Error occurred during execution of open WORK : reason
Explanation

The cause is probably incorrect JCL (DDWORKR1) or an inconsistent database.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-039 Error occurred during execution of read WORK : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-040 Error occurred during execution of write WORK : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-041 Error occurred during execution of close WORK : reason
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-042 Error occurred during execution of open TEMP : reason
Explanation

The cause is probably incorrect job control (DD/TEMPR1).
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-043 Error occurred during execution of read TEMP : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-044 Error occurred during execution of write TEMP : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-045 Error occurred during execution of close TEMP : reason
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-046 Error occurred during execution of open SORT : reason
Explanation

The cause is probably incorrect job control (DD/SORTR1 or DD/SORTR2).
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-047 Error occurred during execution of read SORT : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-048 Error occurred during execution of write SORT : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-049 Error occurred during execution of close SORT : reason
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-051 Error occurred during execution of open dataset/file : reason
Explanation

The cause is probably incorrect JCL.
Action

The correct JCL must be supplied to the function. Please also ensure that the DEVICE parameter is correct. If this is for a PLCOPY job and the PLOGs to be copied are from a cluster database, the NOPPT parameter should be specified.

If no JCL is supplied or the open fails, the following will be displayed: "The Associator data set(s) could not be opened nn - return code explanation. " Processing continues.

If you are using mixed devices for different data sets of the database when running the ADACNV utility, you might also specify the PLOGDEV parameter in the ADACNV run.

ERROR-052 Error occurred during execution of read dataset/file : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-053 Error occurred during execution of write dataset/file : reason RABN : nnnn (xxxxxxxx)
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-054 Error occurred during execution of close dataset/file : reason
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-055 Encoding key value exceeds maximum of 4095
Explanation

Valid encoding keys are in the range 1-4095.
Action

See the Adabas Utilities documentation for a list of valid encoding keys.

ERROR-057 Utility function not permitted by Adabas SAF Security
Explanation

Adabas is running with the Adabas SAF Security, which has been configured to provide protection at the utility function level (SAFCFG parameter UTI=2) or the utility function/file level (UTI=3). Adabas SAF Security has not permitted the execution of the specified utility function (if UTI=3, on the specified files) by the current user.

Action

Determine whether the current user ought to be able to execute the specified function (on the specified files) or whether this function should be run by another user (or not at all).

ERROR-058 Recover log not available
Explanation

The Adabas Recovery Aid is active, but an error occurred when the utility attempted to initialize RLOG data set processing.

Action

ADARAC returns reason code rr: reason text . See also the accompanying ADARxx message.

ERROR-059 Error during recovery logging
Explanation

The utility was not able to record its operation in the recovery log. The utility continues and will terminate with return code 4.

Action

ADARAC returns reason code rr: reason text . See also the accompanying ADARxx message.

ERROR-060 blocks-Extent space allocation failed for file file-number(s)
Explanation

An attempt to allocate an AC extent of size blocks for the file or files specified failed. Probable causes of the failure include

  • not enough free space available.

  • conflicting XXRABN parameter.

  • enough free space available, but not on devices that can satisfy the MAXRECL value for this file.

  • only one AC extent permitted.

  • If ISNSIZE=3, more than 16,777,215 (X'FF FF FF) ISNs; if ISNSIZE=4, more than 4,294,967,294 (X'FF FF FF FE) ISNs.

  • more than 5 extents.
Action

Correct the error and rerun the job.
ERROR-062 For file filename the sum of
numbers of DATA extents, AC extents, UI extents,
and NI extents is too big
or DATA extent or AC extent is zero.
Check ASSO RABN rabn
Explanation

A database problem exists. The sum of Data Storage, address converter (AC), and inverted list (UI and NI) extents is too large or the Data Storage or address converter extents are zero.

Action

Contact you Software AG technical support representative for assistance.

ERROR-064 Error writing DSST : response-code
Explanation

The nucleus returned response code "nn" while writing the DSST to the database. The file(s) being accessed remain(s) in an inaccessible state.

Action

Investigate the cause of the problem; correct the error and rerun the job.

ERROR-065 Database ID mismatch: the ADARUN DBID is dbid-a but the GCB contains DBID dbid-b
Explanation

One of the following occurred:

  • the wrong database was accessed; or

  • an input parameter specified an incorrect database ID.
Action

Correct the error and rerun the job.
ERROR-066 File file-number is password protected
Explanation

A password-protected file "file-number" cannot be processed without the nucleus. The nucleus is required to access the Adabas security file and to validate the supplied password.

Action

Start the Adabas nucleus and rerun the job.
ERROR-067 Invalid or missing password for file file-number
Explanation

The requested file "file-number" is password protected.
Action

Supply the correct password and rerun the job.
ERROR-068 Utility communication block overflow
Explanation

Too many utilities are running in parallel.
Action

Inform your database administrator.
ERROR-069 Checkpoint block overflow
Explanation

The Associator block containing data for checkpoints written offline is filled.

Action

Start the nucleus to pick up information currently stored in the offline checkpoint area; then rerun the job.

ERROR-070 Error writing checkpoint: response-code
Explanation

The nucleus returned the specified response code while writing a checkpoint.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-071 Invalid value for parameter parm. Only values ''YES'' or ''NO'' are allowed.
Explanation

An invalid parameter value was specified for the parameter named in the message (parm). The only valid values are "YES" or "NO".

Action

Supply the correct parameter value and rerun the job.
ERROR-072 Unexpected nucleus response nucleus-response-code
subcode- description
Explanation

An unexpected nucleus response occurred. The Adabas response code, subcode, and a description of the problem are provided in the message.

For more information about the response code, refer to Adabas Response Codes .

Action

Note and keep any related error information or output. Inform your DBA. If necessary, contact your Software AG technical support representative.

ERROR-073 Record too long for output data set
Explanation

An attempt was made to write a record to the sequential output data set. The length of the requested record exceeded the maximum record length permitted by the I/O system.

Action

Inform your database administrator.
ERROR-074 file-number is an invalid file number
Explanation

The supplied file number:

  • is zero;

  • is greater than the MAXFILES parameter in effect for the database;

  • has been duplicated in the file list specified; or

  • represents a system file and is greater than 5000.
Action

Supply a correct file number and rerun the job.
ERROR-075 The parameter parameter is mutually exclusive to one or more other parameters supplied in the input
Explanation

The setting of the specified parameter conflicts with at least one other parameter setting in the related utility job. See the description of the utility syntax in the Adabas Utilities documentation for more information.

Action

Change or remove one of the mutually exclusive parameter settings, and rerun the job.

ERROR-076 Mandatory parameter parameter missing
Action

Add this parameter and rerun the job.
ERROR-077 I/O error during execution of a sequential read on file ddname : reason
Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-078 Error occurred during opening of file ddname for output: reason
Explanation

The cause is probably a misspelling of the DDNAME, incorrect JCL, etc.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-079 Error occurred during closing of output file ddname : reason
Explanation

The cause is probably a misspelling of the DDNAME, incorrect JCL, etc.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-080 Error occurred during execution of write command to file ddname : reason
Explanation

The cause is probably a misspelling of the DD/NAME, incorrect JCL, an incorrect record or block size specification, or some similar problem.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-081 Error occurred during opening/closing of input file ddname : reason
Explanation

An error occurred attempting to open or close the input file identified in the message (ddname). The reason code (reason) for the failure is given in the message. The cause is probably a misspelling of a job control statement name or other JCL error.

Action

Investigate the cause of the error; correct it and rerun the job.
ERROR-084 GETMAIN error - not enough virtual memory requested
length = count (hex-count) bytes
memory gotten = count (hex-count) bytes
Action

Rerun the job in a larger partition/region.
ERROR-085 GETMAIN Error - not enough virtual memory
Reported by ADAIOR function fxname
Explanation

A GETMAIN error occurred. There is not enough virtual memory to process the ADAIOR function referenced in the message (fxname).

Action

Rerun the job in a larger partition or region.

ERROR-086 Invalid { ASSO | DATA } RABN nnnn : reason
Explanation

This RABN is not defined in the database.
Action

Check the input parameters; correct the error and rerun the job.
ERROR-087 device is an unknown disk device type
Explanation

An invalid or unknown device type was found during processing.
Action

Check the input parameters; correct the error and rerun the job.
ERROR-088 ADALNK and/or ADANUC not present
Explanation

The Adabas installation procedure was not properly executed.
Action

Inform your database administrator.
ERROR-089 Utility not permitted to run
Explanation

Another utility has exclusive database control. The table displayed below the message on the terminal screen shows the current contents of the utility communications block. One of the jobs displayed has exclusive database control.

Action

Wait until that job has ended and retry this function.
ERROR-090 Utility not permitted to run; file number file-number is locked by another utility
Explanation

The table displayed below the message on the terminal screen shows the current contents of the utility communications block. One of the jobs displayed has exclusive file control.

Action

Wait until that job has ended, and then retry this function.
ERROR-091 Utility not permitted to run
Explanation

Concurrent jobs are not allowed to run against the database. In this case,

  • the nucleus or another utility is active; or

  • the nucleus was started with ADARUN READONLY=YES.
Action

Determine which utility/nucleus is already active. Wait until that utility/nucleus has ended and retry this function. If the nucleus was started with READONLY=YES, shut it down and restart with READONLY=NO.

ERROR-092 Utility not permitted to run
Explanation

The Adabas nucleus returned response "nn -xxx nucleus response -xxx". The nucleus cannot allow access to the requested file.

Action

Analyze the nucleus response code. Correct the error and rerun the job.

ERROR-093 Utility not permitted to run
Explanation

Pending autorestart detected.
Action

Restart the nucleus to perform the autorestart. Perform a shutdown after successful nucleus start if required. Rerun this job.

ERROR-094 Utility not permitted to run
Explanation

The version of the accessed database conflicts with the version of the active utility. Either the version indicator in the GCBs or the version indicator returned by the Adabas nucleus is not correct. The version indicator found is "version" (the text of the messages supplies the actual version indicator value).

Action

Correct the database or load library specification and rerun the job.
ERROR-098 File file-number cannot be processed
Explanation

The file comes from a database with a higher version number, and uses features not supported in the current nucleus version.

Action

It is not possible to process this file using the current version of the Adabas nucleus or utilities.

ERROR-099 Internal error at xxxxxx+yyyyyy
Explanation

Register contents at time of error:

R0-R3 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
R4-R7 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
R8-R11 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
R12-R15 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
Action

Inform your database administrator.
ERROR-101 Value for unique descriptor xx in file yy already present
Explanation

Input data is invalid; the specified file yy cannot be processed. ISN=nnnn DE-VALUE: llvvvvvvvv The descriptor value (DE-VALUE) comprises the length of the descriptor value (ll) followed by the actual value (vvvvvvvv).

Action

Rerun the utility with unique input data.
ERROR-102 An attempt was made to create a 16th index level for file xxx
Explanation

No more than 15 levels are permitted.
Action

Rerun this function with a smaller value for ASSOPFAC, the Associator padding factor.

ERROR-103 File number file-number is not accessible
Explanation

One of the following occurred:

  • A previous function to LOAD, REFRESH, REORDER, or RESTORE the file was interrupted. It is inconsistent.

  • A RESTONL FMOVE function or RESTONL FILE function with parameter ALLOCATION=NOFORCE was interrupted; continuing the function with RESTPLOG is not possible.

Action

Delete the file or overwrite it using ADAORD STORE or ADASAV RESTORE/RESTONL.

ERROR-104 File number file-number is already loaded
Explanation

The file being accessed is already present in the database.
Action

Look at the database report. Delete the file or choose another file number, then rerun the job.

ERROR-105 File number file-number is not loaded
Explanation

The file being accessed is not present in the database.
Action

Check the file number; correct it and rerun the job.
ERROR-106 Compressed record too long
Explanation

ISN of record = nnnn Length of record = nnn bytes Maximum record length = nnn bytes

The characteristics of the data storage device do not allow such a record to be stored.

ERROR-107 The value of the `SORTSIZE' parameter and the size of the SORT dataset do not match.
Explanation

The data set is smaller than specified.
Action

Supply the correct size and rerun the job.
ERROR-108 The value of the `TEMPSIZE' parameter and the size of the TEMP dataset do not match.
Explanation

The data set is smaller than specified.
Action

Supply the correct size and rerun the job.
ERROR-109 Workpool (LWP) too small
Explanation

At least nnnnK of space is required. A larger value will increase performance.

Action

Increase the ADARUN LWP parameter value and rerun the job.
ERROR-110 SORT dataset too small
Explanation

Sorting may require either a larger SORTRn/DDSORTRn data set size, or two Sort data sets with a SORTSIZE equal to the combined size of both data sets.

Action

Supply a larger sort data set and increase the appropriate SORTSIZE= parameter. Decreasing the LWP parameter specified with the job might also help. The rules for the sort data set space calculation are described in the Adabas Utilities documentation. Rerun the job using the RESTART parameter.

ERROR-111 Invalid value for the parameters MINISN and/or MAXISN
Explanation

The MINISN and MAXISN parameter values must satisfy the following expression:

  • If the ISNSIZE is 3: 0 < MINISN <= MAXISN < (MINISN + 16,777,215)

  • If the ISNSIZE is 4: 0 < MINISN <= MAXISN < (MINISN + 4,294,967,294)

Action

Supply the correct parameter value and rerun the job.
ERROR-112 Function not permitted
Explanation

An attempt was made to access an Adabas system file. This is not permitted.

Action

Correct the error and rerun the job.
ERROR-113 Invalid value for the parameter parameter
Explanation

An invalid value was specified for the parameter named in the message (parameter). The only values allowed are YES or NO.

Action

Supply the correct parameter value and rerun the job.
ERROR-114 Invalid value for the parameter ASSOPFAC or DATAPFAC
Explanation

The value for a padding factor must be in the range 1 to 90%.
Action

Supply the correct parameter value and rerun the job.
ERROR-115 Invalid value for the parameter MAXRECL
Explanation

The value for MAXRECL must be all of the following:

  • greater than 4;

  • less than or equal to the Work block size minus 94;

  • less than or equal to the Data Storage block size minus 4;

  • equal to the MAXRECL of the anchor file (for components of expanded files).

Action

Supply the correct parameter value and rerun the job.
ERROR-116 Invalid value for the parameter MAXFILES
Explanation

The value for the parameter MAXFILES must meet the following requirements:

  • the parameter value must be in the range 3 to "nnnn" where "nnnn" is the Associator block size minus 1.

  • the first (MAXFILES*5)+30 blocks must fit into the first Associator extent.

Action

Supply the correct parameter value and rerun the job.
ERROR-117 Parallel usage of dataset-name dataset
Explanation

data-set-name RABN rabn-number (value) was overwritten by another utility.

Action

Rerun the job, and avoid parallel usage of the "data-set-name" data set.

ERROR-118 The maximum record length of the ddname dataset is not large enough to accommodate the record length of the input file.
Explanation

The maximum record length (MAXRECL) of the file identified in the message (ddname) is not long enough for the data intended to be written to it.

Action

Correct the MAXRECL setting of the data set so it is equal to or larger than the maximum record length of the records being input. Then resubmit the job.

ERROR-120 Invalid value for parameter `ISNSIZE'
Explanation

Either 3 or 4 may be specified for this parameter.
Action

Check the parameter input; correct any errors, then rerun the job.