This section of the documentation provides installation preparation information for Adabas Review in BS2000 operating system environments.
The installation of Software AG products is performed by installation jobs, which are either created manually or generated by System Maintenance Aid (SMA).
For each step of the installation procedure described below, the job number of a job performing the respective task is indicated. This job number refers to an installation job generated by SMA. If you are not using SMA, a sample installation job of the same number is provided in the job library on the Natural installation tape; you must adapt this example job to your requirements.
For information about using Software AG's System Maintenance Aid (SMA) for the installation process, refer to the System Maintenance Aid Manual .
This document covers the following topics:
Other prerequisites for Adabas Review are described in Software AG Product Support and Requirements.
Before installing this version of Adabas Review, ensure that you are running a currently-supported version of BS2000 OSD. For information on the BS2000 OSD versions supported by this release ofAdabas Review, access Software AG's Empower web site at https://empower.softwareag.com. Log into Empower. Once you have logged in, you can expand Products in the left menu of the web page and select Product Roadmaps to access the Product Version Roadmaps application. This application allows you to review platform support information for specific Software AG products and releases.
This version of Adabas Review requires one of the following TP monitors:
TIAM
UTM
The Adabas Review installation tape is a standard label tape with the volume serial number REVvrs, where the notation vrs represents the version, revision, and SP level of the product.
Copy the files (data sets) from the supplied installation medium to your disk before you perform the individual installation procedure for each component to be installed.
The way you copy the files depends on the installation method and the medium used:
If you use System Maintenance Aid (SMA), refer to the copy job instructions provided in the System Maintenance Aid documentation.
If you are not using SMA and want to copy the files from CD-ROM, refer to the README.TXT file on the CD-ROM.
If you are not using SMA and want to copy the files from tape, follow the instructions in this section.
This section explains how to copy all files from tape to disk.
This step is not necessary if you have already copied the library
SRVvrs.LIB from another Software AG
installation tape. For further information, refer to the element
#READ-ME in this library. The library
SRVvrs.LIB is stored on the tape as a
sequential file named SRVvrs.LIBS
containing LMS commands. The current version
vrs can be obtained from the
Software AG Product Delivery Report.
Execute the following commands to convert
SRVvrs.LIBS into an LMS library:
/IMPORT-FILE SUPPORT=*TAPE(FILE-NAME=SRVvrs.LIBS,- / VOLUME=volser, DEV-TYPE=tape-device) /ADD-FILE-LINK LINK-NAME=EDTSAM, FILE-NAME=SRVvrs.LIBS,- / SUPPORT=*TAPE(FILE-SEQ=3), ACC-METH=*BY-CAT,- / BUF-LEN=*BY-CAT, REC-FORM=*BY-CAT, REC-SIZE=*BY-CAT /START-EDT @READ '/' @SYSTEM 'REMOVE-FILE-LINK EDTSAM' @SYSTEM 'EXPORT-FILE FILE-NAME=SRVvrs.LIBS' @WRITE 'SRVvrs.LIBS' @HALT /ASS-SYSDTA SRVvrs.LIBS /MOD-JOB-SW ON=1 /START-PROG $LMS /MOD-JOB-SW OFF=1 /ASS-SYSDTA *PRIMARY
where:
tape-device is the device
type of the tape, for example, TAPE-C4, and
volser is the VOLSER of the
tape (see the Software AG Product Delivery
Report).
Call the procedure P.COPYTAPE in the library
SRVvrs.LIB to copy the procedure
COPY.PROC to disk:
/CALL-PROCEDURE (SRVvrs.LIB,P.COPYTAPE), - / (VSNT=volser, DEVT=tape-device)
If you use a TAPE-C4 device, you can omit the parameter
DEVT.
Enter the procedure COPY.PROC to copy all product files to
disk:
/ENTER-PROCEDURE COPY.PROC, DEVT=tape-device
If you use a TAPE-C4 device, you can omit the parameter
DEVT.
The result of this procedure is written to the file
L.REPORT.SRV.
If you are installing Adabas Review using the Software AG System Maintenance Aid (SMA), refer to the System Maintenance Aid documentation and to the information provided with the installation tape for specific installation instructions.
The installation tape contains the files listed below. The sequence of the files is shown in the Software AG Product Delivery Report delivered with the installation tape.
| File Name | Contents |
|---|---|
| REVvrs.INPL | Adabas Review Natural objects |
| REVvrs.IUPD | Adabas Review Natural objects updates |
| REVvrs.MOD | Adabas Review module library |
| REVvrs.SRC | Adabas Review source modules and installation jobs |
| REVvrs.SYSF | Empty Adabas Review repository file |
| REVvrs.ZAPS | Zaps required for Adabas Review on this platform |
Note:
Throughout this documentation, the notation
vrs stands for the version, revision, and system
maintenance level of the Adabas Review being installed.
Source library members for Adabas Review are as follows:
Note:
Type "J" indicates a job member,
"S" indicates a source member, and
"M" indicates a macro member.
| Member | Type | Description |
|---|---|---|
| ASMBS2 | J | Sample job for macro assembly. |
| EXPAND | J | Sample job to upgrade an Adabas Review 3.4 SP4 repository to an Adabas Review 4.1 repository. |
| EXPAND1 | J | Sample job to upgrade an Adabas Review 4.1 repository to an Adabas Review 4.2 repository. |
| EXPAND2 | J | Sample job to upgrade an Adabas Review 4.2 repository to an Adabas Review 4.3 repository. |
| EXPAND3 | J | Sample job to upgrade an Adabas Review 4.3 or 4.4 repository to an Adabas Review 4.5 SP1 repository. |
| EXPAND4 | J | Sample job to upgrade an Adabas Review 4.5 SP1 repository to an Adabas Review 4.5 SP2 repository. |
| EXPAND5 | J | Sample job to upgrade an Adabas Review 4.5 SP2 repository to an Adabas Review 4.6 SP1 repository. |
| HUBJCL | J | Sample job to start the Adabas Review hub. |
| LOCAL | J | Sample job to start the Adabas Review in local mode. |
| P.ADALNK | J | Sample job to link the Adabas Review user exit with ADALNK. |
| P.GENERATE | J | Sample job to allocate and generate the files used by Adabas Review. |
| P.REVBATCH | J | Sample JCL to process a sequential command log by the batch component of Adabas Review. |
| REGEQU | M | Used by REVUEX5. |
| REVUEX1 | S | Sample user exit 1 (User field exit) program. |
| REVUEX5 | S | Sample user exit 5 program. |
| REVUXLOG | S | Sample Assembler source code for an Adabas Review command logging user exit. |
| REVUXSUM | S | Sample summary report user exit. |
| SAMPUEX5 | S | Sample user exit 5 |
| UEX5PARM | M | Used by REVUEX5. |
| WTO | M | Used by REVUEX5. |
| ZAPOPT | S | Contains optional zaps for installing Adabas Review. |
Adabas Review is installed in two phases:
Phase 1: Install non-TP-specific components. All steps in this phase are identical regardless of the TP monitor in use:
Install the Adabas Review repository;
Install Adabas Review under Adabas;
Install the Adabas Review hub (hub mode only);
Optional installation procedures.
Phase 2: Install TP-specific components. Separate procedures are used to install Adabas Review under each of the supported TP monitors: TIAM, batch, and UTM.
Phase one procedures are described in Installation: Phase 1; phase two procedures in Installation: Phase 2.
