
	Version 8.2.4	SEARCH INDEX CONTENTS \| PDF PAGE PDF BOOKS \| HOME UP PREV NEXT

— Adabas Utility Functions for Delta Save —

ADAREP Utility

If a Delta Save logging (DLOG) area is defined in the database, the database report utility ADAREP additionally reports the Delta Save status. After the section about alternate RABNs, a Delta Save section is displayed with the following information:

Delta Save status (disabled or enabled);
percentage of the DLOG area used;
number of full save operations since installation of the DLOG area;
date and time of the last full save;
number of Delta Save operations since the last full save;
date and time of the last delta save;
estimate of the number of database blocks that would be saved in a current Delta Save operation. The estimate may be higher or lower than the actual number of blocks.
location, device type, block size, and number of unused blocks of the DLOG area.

If no DLOG area is defined, the Delta Save section is omitted.

This document covers the following topics:

Delta Save Report Format
Delta Save Checkpoints
JCL/JCS Requirements and Examples

Delta Save Report Format

The following is an example of the Delta Save section in an ADAREP database report:


  

  ***********************

  * DELTA SAVE FACILITY *                           yyyy-mm-dd  hh:mm:ss  

  ***********************

  

  

  DELTA SAVE STATUS = ENABLED

  DLOG AREA USAGE   = 2%

  

  LAST FULL SAVE NUMBER        = 2

  DATE/TIME OF LAST FULL SAVE  = 1997-01-19 04:03:36

  LAST DELTA SAVE NUMBER       = 5

  DATE/TIME OF LAST DELTA SAVE = 1997-01-24 22:39:45

  

  ESTIMATED NUMBER OF CHANGED BLOCKS = CA. 1,700 BLOCKS

  

  D S F   L O G G I N G   A R E A

  

  LIST I DEV  BLOCK I  SPACE ALLOC.  I  FROM     TO   I  UNUSED SPACE  I

  TYPE I TYPE LNGTH I BLOCKS     CYL I  RABN    RABN  I BLOCKS     CYL I

       I            I                I                I                I

  -----I------------I----------------I----------------I----------------I

       I            I                I                I                I

  DSF  I 3390  2004 I    100       0 I  1340    1439  I    74        0 I

       I            I                I                I                I

  ----------------------------------------------------------------------

Delta Save Checkpoints

The following additional checkpoints can be written by the Adabas nucleus or utilities and included in the ADAREP output when running with the Delta Save Facility:

Checkpoint		Originated	Description
Type	Name	By	Description
0B	SYNP	ADASAV	End of SAVE DELTA operation
0C	SYNP	ADASAV	End of RESTORE DELTA operation
0D	SYNP	ADASAV	End of MERGE operation
0E	SYNV	ADASAV	VOLSER entry for SAVE DELTA operation
0F	SYNV	ADASAV	VOLSER entry for MERGE operation (output volumes)
6A	SYNS	SYSAOS	DSF logging (DLOG) area installed
6B	SYNS	SYSAOS	DLOG area changed
6C	SYNS	SYSAOS	DLOG area removed

JCL/JCS Requirements and Examples

This section describes the job control information required to run the ADAREP utility with BS2000/OSD, z/OS, z/VM, VSE/ESA and z/VSE systems, and shows examples of each of the job streams.

This section covers the following topics:

BS2000/OSD
z/OS
z/VM
VSE/ESA and z/VSE

BS2000/OSD

Data Set	Link Name	Storage	More Information
Associator	DDASSORn	disk
Data Storage	DDDATARn	disk
ADAREP parameters	SYSDTA/DDKARTE
ADARUN parameters	SYSDTA/DDCARD		Adabas Operations
ADAREP messages	SYSLST/DDDRUCK		Adabas Messages and Codes
ADARUN messages	SYSOUT/DDPRINT		Adabas Messages and Codes

Example


/.ADAREP LOGON

/OPTION MSG=FH,DUMP=YES

/REMARK *

/REMARK *   A D A R E P     ALL FUNCTIONS

/REMARK *

/SYSFILE SYSLST=L.REP

/FILE    ADA.MOD,LINK=DDLIB

/FILE    ADA99.ASSO  ,LINK=DDASSOR1,SHARUPD=YES

/FILE    ADA99.DATA  ,LINK=DDDATAR1,SHARUPD=YES

/EXEC (ADARUN,ADA.MOD)

ADARUN PROG=ADAREP,DB=99

ADAREP CPLIST 

/LOGOFF NOSPOOL

z/OS

Data Set	DD Name	Storage	More Information
Associator	DDASSORn	disk
Data Storage	DDDATARn	disk
ADAREP parameters	DDKARTE
ADARUN parameters	DDCARD		Adabas Operations
ADAREP messages	DDDRUCK		Adabas Messages and Codes
ADARUN messages	DDPRINT		Adabas Messages and Codes

Example


//REP       EXEC PGM=ADARUN

//STEPLIB   DD   DISP=SHR,DSN=ADABAS.Vvrs.LOADLIB

//*

//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.ADA99.ASSOR1

//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.ADA99.DATAR1

//SYSUDUMP  DD   SYSOUT=A

//DDDRUCK   DD   SYSOUT=A

//DDPRINT   DD   SYSOUT=A

//DDCARD    DD   *

ADARUN PROG=ADAREP,SVC=249,DEVICE=3390,DB=99

//DDKARTE   DD   *

ADAREP    CPLIST

z/VM

Data Set	DD Name	Storage Type	More Information
Associator	DDASSORn	disk
Data Storage	DDDATARn	disk
ADAREP parameters	DDKARTE	disk/ terminal/ reader
ADARUN parameters	DDCARD	disk/ terminal/ reader	Adabas Operations
ADAREP messages	DDDRUCK	disk/ terminal/ printer	Adabas Messages and Codes
ADARUN messages	DDPRINT	disk/ terminal/ printer	Adabas Messages and Codes

Example


DATADEF DDASSOR1,DSN=ADABASVv.ASSO,VOL=ASSOV1

DATADEF DDDATAR1,DSN=ADABASVv.DATA,VOL=DATAV1

DATADEF DDPRINT,DSN=ADAREP.DDPRINT,MODE=A

DATADEF DUMP,DUMMY

DATADEF DDDRUCK,DSN=ADAREP.DDDRUCK,MODE=A

DATADEF DDCARD,DSN=RUNREP.CONTROL,MODE=A

DATADEF DDKARTE,DSN=ADAREP.CONTROL,MODE=A

ADARUN

Contents of RUNREP CONTROL A1:


ADARUN PROG=ADAREP,DEVICE=3390,DB=99

Contents of ADAREP CONTROL A1:


ADAREP CPLIST

VSE/ESA and z/VSE

Data Set	Symbolic	Storage	Logical Unit	More Information
Associator	ASSORn	disk
Data Storage	DATARn	disk
ADAREP parameters		reader	SYSIPT
ADARUN parameters	SYSRDR CARD CARD	reader tape disk	SYSRDR SYS000 *	Adabas Operations
ADAREP messages		printer	SYS009	Adabas Messages and Codes
ADARUN messages		printer	SYSLST	Adabas Messages and Codes

* Any programmer logical unit can be used.

See the VSE/ESA-related job information in section Adabas Utility Functions for Delta Save.

Example


// EXEC PROC=ADAVvFIL

// EXEC PROC=ADAVvLIB

// EXEC ADARUN,SIZE=ADARUN

ADARUN PROG=ADAREP,SVC=xxx,DEVICE=dddd,DB=yyyy

/*

ADAREP CPLIST

/*

SEARCH INDEX CONTENTS | PDF PAGE PDF BOOKS | HOME UP PREV NEXT