ERROR-121 | ERROR-122 | ERROR-123 | ERROR-124 | ERROR-125 | ERROR-126 | ERROR-127 | ERROR-128 | ERROR-129 | ERROR-130 | ERROR-131 | ERROR-132 | ERROR-133 | ERROR-134 | ERROR-135 | ERROR-137 | ERROR-138 | ERROR-139 | ERROR-141 | ERROR-142 | ERROR-143 | ERROR-144 | ERROR-145 | ERROR-146 | ERROR-147 | ERROR-148 | ERROR-149 | ERROR-150 | ERROR-151 | ERROR-152 | ERROR-153 | ERROR-154 | ERROR-155 | ERROR-156 | ERROR-157 | ERROR-158
ERROR-121 | DDFILEA block size too small |
Explanation |
The DDFILEA block size ("count-a" bytes) is too small to write a "record-type" record with a length of "count-b" bytes (file "file-number"). Actual values are provided in the message text. |
Action |
Assign DDFILEA to a device type with a greater sequential block size. |
ERROR-122 | DDFILEA structure mismatch |
Explanation |
DDFILEA has an invalid structure (probably a job control statement error). |
Action |
Correct any error and rerun the ADAORD job. |
ERROR-123 | No utility function given |
Action |
Supply one of the following keywords and rerun the job: REORDB, REORASSO, REORDATA, REORFILE, REORFASSO, REORFDATA, RESTRUCTUREF, RESTRUCTUREDB, STORE. See the Adabas Utilities documentation for further information. |
ERROR-124 | At least one file required |
Explanation |
An empty file list is not permitted for the functions REORFILE, REORFASSO, REORFDATA and RESTRUCTUREF and STORE. |
Action |
Supply the correct parameter value, and rerun the ADAORD job. |
ERROR-125 | The value for the MAXFILES parameter is less than the highest loaded file number (MAXFILES=count, highest loaded file number=file-number) |
Action |
Increase the MAXFILES value and rerun the job. |
ERROR-126 | DATASTORAGE record too long. The record with ISN isn-number in file file-number has a length of count bytes. The maximum permitted record length is maxcount bytes. |
Explanation |
The record with ISN isn-number in file file-number has a length of count bytes. The maximum permitted record length is maxcount bytes (actual values are given in the message text). This file cannot be processed by ADAORD. |
ERROR-127 | Input data set does not contain data for file file-number |
Explanation |
Either a wrong input (DDFILEA) is supplied, or a wrong file is requested. |
Action |
Supply the correct parameter value and rerun the ADAORD job. |
ERROR-128 | I/O count mismatch |
Explanation |
The number of records read from DDFILEA is different from the number of records written to DDFILEA. DDFILEA : count-a WRITES DDFILEA : count-b READS Not all files included in processing are currently accessible. |
Action |
Check the job control to see whether there is a multivolume problem. Restore the save tape and rerun the ADAORD job. |
ERROR-129 | Invalid value for the 'SORTSEQ' parameter for file file-number |
Explanation |
Allowed values are:
|
Action |
Supply the correct parameter value and rerun the ADAORD job. |
ERROR-130 | Invalid value for the parameter 'NEWDBID' |
Explanation |
The value for the database ID must be in the range 1 to 65,535. |
Action |
Supply the correct NEWDBID parameter value and rerun the ADAORD job. |
ERROR-131 | The descriptor xx for file file-number has the 'NU' option |
Explanation |
NU option descriptors must not be used to control the sort sequence of reordering; this may cause a physically inconsistent database. |
Action |
Select another descriptor for the sort sequence. Then rerun ADAORD. See the Adabas Utilities documentation for more information. |
ERROR-132 | DSST-space allocation failed |
Explanation |
Not enough space is left in the Associator to allocate the DSST. |
Action |
Reduce the value for the MAXFILES parameter and rerun the ADAORD job. |
ERROR-133 | The MAXISN value specified for file file-number is less than the current TOPISN |
Explanation |
The MAXISN parameter setting must be greater than the TOPISN value listed in the ADAREP report. TOPISN is the highest current ISN allocated for records in the specified file (the file number is given in the message text), and cannot be defined. |
Action |
Specify the correct MAXISN value and rerun the ADAORD job. |
ERROR-134 | FST (Free Space Table) not available |
Explanation |
The free space table is locked by the nucleus or by another utility. |
Action |
Try rerunning the ADAORD job later. |
ERROR-135 | MAXISN parameter conflicts with NOACEXTENSION |
Explanation |
For file "file-number", the NOACEXTENSION option is in effect, but the MAXISN value supplied (new-value) is greater than the old MAXISN (old-value). (Actual file and MAXISN values are given in the message text.) |
Action |
Supply the correct MAXISN value and rerun the ADAORD job. |
ERROR-137 | Alternate RABNs cannot be allocated |
Explanation |
An attempt was made to allocate "count" ASSO/DATA alternate RABNs starting from RABN "start-rabn". |
Action |
Investigate and correct the cause of the error, and rerun the job. |
ERROR-138 | Inconsistent file list |
Explanation |
File "file-number" is either a coupled file or part of an expanded file, but not all related files have been included in the file list. |
Action |
Supply the correct file list, and rerun the ADAORD job. |
ERROR-139 | Overwrite system file not possible |
Explanation |
An attempt was made to overwrite the checkpoint or security file with a file having another file number. |
Action |
Correct the file number to the original and rerun the ADAORD job. |
ERROR-141 | Invalid ISN detected |
Explanation |
The invalid ISN (isn-number) was detected in file (file-number). The ISN is either
|
Action |
Repair the file and reexecute ADAORD. |
ERROR-142 | Duplicate ISN detected |
Explanation |
ISN (isn-number) is contained twice in file (file-number). |
Action |
Correct the file and reexecute ADAORD. |
ERROR-143 | DLOG area allocation failed |
Explanation |
The allocation of the DSF logging area failed. An attempt was made to allocate (count) blocks starting at Associator RABN (rabn-number). |
Action |
Correct the RABN assignment and reexecute ADAORD. |
ERROR-144 | Error on DDFILEA |
Explanation |
After reopening DDFILEA for input, the first record read did not have record number 1. Not all the files included in the processing are currently accessible. |
Action |
Check the JCL to determine whether there is a multivolume problem. Restore your save tape and rerun the ADAORD job. |
ERROR-145 | Storing {CHECKPOINT | SECURITY} file not allowed |
Explanation |
A version 5.2 or below checkpoint file cannot be converted by ADAORD STORE to version 5.3 or above. A version 5.3 or below security file cannot be converted by ADAORD STORE to version 6.1 or above. |
Action |
Remove the checkpoint or security file from the file list and rerun ADAORD. |
ERROR-146 | Descriptor not found |
Explanation |
The nucleus returned response code 57 (ADARSP057): the descriptor "xx" for file "file-number" could not be found. ADAORD cannot unload the index for this file. |
Action |
Run ADAICK ICHECK for this file; remove the error and rerun ADAORD. |
ERROR-147 | Duplicate file number detected |
Explanation |
The file "file-number" was specified twice (the actual file value is provided in the message text). |
Action |
Correct the error and rerun the job. |
ERROR-148 | Partial overwrite of coupled/expanded files |
Explanation |
The file "file-number-a" is coupled with or, in an expanded file, linked to the file "file-number-b", which is not part of the STORE operation (the actual file values are provided in the message text). This STORE operation cannot be serviced because it would result in a logical data inconsistency. |
Action |
Check the STORE function parameter input; correct the error and then rerun the STORE job. |
ERROR-149 | Invalid value for parameter 'ALLOCATION' |
Explanation |
Valid values are ALLOCATION=FORCE | NOFORCE. |
Action |
Supply the correct parameter value and rerun the job. |
ERROR-150 | Invalid EXCLUDE parameter |
Explanation |
The file number given in the message either has not been specified at all for REORDER/STORE, or has been specified twice in the EXCLUDE parameter. |
Action |
Correct the error and rerun the job. |
ERROR-151 | File file-number is a physically coupled file The ISNSIZE cannot be modified |
Explanation |
A coupled index contains the ISNs of the file it is coupled to. These ISNs have the byte-size specified by the other file's ISNSIZE. Even if the other file is also modified by ADAORD, the ISNSIZE cannot be modified using the coupled index. |
Action |
Remove the ISNSIZE parameter or modify the file-list. |
ERROR-152 | Overwrite system file not possible |
Explanation |
The Replicator or SLOG system file may not be overwritten by a non-system file with the same file number. |
Action |
Correct the file number to the original and rerun the ADAORD job. |
ERROR-153 | Storing Replicator/SLOG file not allowed |
Explanation |
The file on the input tape is not a valid Replicator or SLOG system file. |
Action |
Remove the Replicator or SLOG system file from the file list and rerun ADAORD. |
ERROR-154 | A Reptor database may only contain the files CHECKPOINT, SECURITY, REPLICATOR, and SLOG |
Explanation |
A database defined as an Event Replicator Server (created with REPTOR=YES) must not contain user files or system files not related to replication. |
Action |
Do not attempt to store files other than CHECKPOINT, SECURITY, REPLICATOR, or SLOG on Event Replicator Servers. |
ERROR-155 | The MAXISN2 value specified for file file-number is less than the current TOP AC2 ISN |
Explanation |
The MAXISN2 parameter setting must be greater than the TOP AC2 ISN value listed in the ADAREP report. TOP AC2 ISN is the highest current secondary ISN allocated for secondary spanned records in the specified file (the file number is given in the message text), and cannot be defined. |
Action |
Specify the correct MAXISN2 value and rerun the ADAORD job. |
ERROR-156 | Invalid value for the parameter MAXISN2 |
Explanation |
The MAXISN2 parameter values must satisfy the following expressions:
|
Action |
Supply the correct MAXISN2 parameter value and rerun the job. |
ERROR-157 | Maximum number of user system files defined File file-number was originally loaded with the SYSFILE option, but the maximum number of user system files already exists. |
Explanation |
The limit of ten user system files has already been reached. |
Action |
Unload, delete, and reload one of the user system files without the SYSFILE option. Then rerun this utility. |
ERROR-158 | The database is active but the utility communications block (DIB) is missing the nucleus entry |
Explanation |
The ADAORD utility determined the nucleus was active without a DIB entry. |
Action |
Check the job to ensure the correct ASSO, DATA, and WORK data sets are specified for the given DBID. |