The L1 and L4 commands read a single record from Data Storage.
We recommend that you set unused ACB and ACBX fields to binary zeros before the direct call is initiated.
This document covers the following topics:
Specify the file number and ISN of the record to be read. In addition, indicate in the format buffer which fields are to be read. Adabas returns the requested field values in the record buffer.
The L4 command performs the same function as the L1 command, but places the record in hold status. If the record to be held is currently being held by another user, the command is placed in wait status until either the record becomes available or the transaction times out. If the L4 command is issued with the Command Option 1 field set to "R", Adabas returns response code 145 (ADARSP145) if the record to be read and held is unavailable.
The first-unused-ISN (F) option specified in the Command Option 2 field returns the next highest unused ISN for the specified file in the ISN field. The F option cannot be used for expanded files.
The multifetch/prefetch option can improve performance by eliminating the time needed for single-record fetches. Multifetching/prefetching can be enabled by specifying "M", "O" (for multifetching) or "P" (for prefetching) in the Command Option 1 field. Refer to the section Using the Multifetch/Prefetch Feature, for more information.
The GET NEXT (N) option specified in the Command Option 2 field reads the records identified by the ISNs contained in an ISN list (which was created previously by an Sx command) without the user having to provide the ISN of the record to be read with each L1 or L4 call. Adabas selects the ISN from the list and reads the record identified by that ISN.
The read by ISN sequence (I) option specified in the Command Option 2 field reads a record identified by the ISN you specify in the ISN field. If the ISN specified is not present in the file, the record of the next higher ISN is read, and that record's ISN is returned in the ISN field.
The compressed option (set by specifying "C." in the format buffer) can be used to request that the record read is to be returned in compressed format as it is stored internally by Adabas.
This section describes ACB interface direct calls for the L1 and L4 commands. It covers the following topics:
| Field | Position | Format | Before Adabas Call | After Adabas Call |
|---|---|---|---|---|
| 1-2 | -- | -- | -- | |
| Command Code | 3-4 | alphanumeric | F | U |
| Command ID | 5-8 | alphanumeric | F | U |
| File Number | 9-10 | binary | F | U |
| Response Code | 11-12 | binary | -- | A |
| ISN | 13-16 | binary | F | U * |
| ISN Lower Limit | 17-20 | binary | F | U |
| 21-24 | -- | -- | -- | |
| Format Buffer Length | 25-26 | binary | F | U |
| Record Buffer Length | 27-28 | binary | F | U |
| 29-32 | -- | -- | -- | |
| ISN Buffer Length ** | 33-34 | binary | F | U |
| Command Option 1 | 35 | alphanumeric | F | U |
| Command Option 2 | 36 | alphanumeric | F | U |
| 37-44 | -- | -- | -- | |
| Additions 2 | 45-48 | binary / binary | -- | A |
| Additions 3 | 49-56 | alphanumeric | F | A |
| Additions 4 | 57-64 | alphanumeric | F | A |
| Additions 5 | 65-72 | alphanumeric | F | U |
| Command Time | 73-76 | binary | -- | A |
| User Area | 77-80 | -- | -- | U |
| Buffer | Before Adabas Call | After Adabas Call |
|---|---|---|
| Format | F | U |
| Record | -- | A |
| ISN ** | -- | A |
where:
| F | Supplied by user before Adabas call |
| A | Supplied by Adabas |
| U | Unchanged after Adabas call |
| * | Except for special options |
| ** | The ISN buffer and length are required only if the multifetch or prefetch option is specified |
| -- | Not used |
We recommend that you set unused ACB fields to binary zeros before the direct call is initiated.
L1 or L4
If a series of records is to be read with a series of L1 or L4 calls, and the same fields are to be specified in the format buffer for each call, this field should be set to a non-blank, non-zero value. This results in a reduction of the time required to process each L1 or L4 call.
If the GET NEXT option is to be used, the command ID of the ISN list to be used must be specified in this field. The format buffer may not be changed between successive L1 or L4 calls when the GET NEXT option is used.
If only a single record is to be read, or if the format buffer is to be modified between L1 or L4 calls, this field should be set to blanks.
If the command ID value is X'FFFFFFFF', automatic command ID generation will be in effect. In this case, the Adabas nucleus will generate values for command ID beginning with X'00000001', and will increment the value by 1 for each L1 or L4 call. When specifying user-defined command IDs, the user must ensure that each command ID is unique.
See also the Additions 5 field for separate format ID and/or global format ID usage.
Specify the binary number of the file to be read in this field. For physical direct calls, specify the file number as follows:
For a one-byte file number, enter the file number in the rightmost byte (10); the leftmost byte (9), should be set to binary zero (B'0000 0000').
For a two-byte file number, use both bytes (9 and 10) of the field.
Note:
When using two-byte file numbers and database IDs, a X'30' must
be coded in the first byte of the control block.
Adabas returns the response code for the command in this field. Response code 0 (ADARSP000) indicates that the command was executed successfully. Nonzero response codes, which can also have accompanying subcodes returned in the rightmost half of the Additions 2 field, are described in the Adabas Messages and Codes Manual documentation.
Response code 3 (ADARSP003) indicates an end-of-list condition (applicable only if the GET NEXT option is used).
Specify the ISN of the record to be read.
If you specify the GET NEXT (N) option, Adabas selects ISNs from the ISN list identified by the command ID, reads the record of that ISN, and returns the ISN for the next record in this field; any specified ISN value is ignored.
If you specify the ISN sequence (I) option, you must also specify an ISN value in this field. The L1 or L4 command returns that ISN's data record in the record buffer.
If you specify the "F" option, the L1 or L4 command returns the next higher available ISN recorded in the file control block (FCB) in this field.
When a record is read, Adabas returns that record's ISN in this field, regardless of the option selected. With the option "F", this field returns the next higher unused ISN.
If either "M" or "O" (multifetch option) is specified in the Command Option 1 field, a non-zero value in this field determines the maximum number of records to be multifetched. If this value is zero, the number of records to be multifetched is limited by the record and ISN buffer lengths. Refer to the section Using the Multifetch/Prefetch Feature for more information.
If a partial LOB field is requested by this command and the Command Option 2 field is set to L, the ACBISL field is used to keep track of the current position in the LOB value when multiple L1 or L4 calls are made for the field.
The format buffer length (in bytes). The actual format buffer area defined in the user program must be at least as large as the length specified.
The record buffer length (in bytes). The actual record buffer area defined in the user program must be at least as large as the length specified.
The ISN buffer length (in bytes). The ISN buffer defined in the user program must be at least as large as the length specified.
| Option | Description |
|---|---|
| F (first unused) | Returns the next highest unused ISN for the specified file in the ISN field. The next unused ISN is determined by referring to the file control block (FCB). Do not use the F option when reading Adabas expanded files. |
| M (multifetching) | Multifetch processing is performed for this command. |
| O (multifetching with the R option) | Multifetch processing and R option processing (see below) is performed for this command. |
| P (prefetching) | Prefetch processing is performed for this command. |
| R (return) | Returns response code 145 (ADARSP145) if the record to be read and held by an L4 command is not available. |
Specifying the M, O, or P option indicates that the prefetch or multifetch option is to be used for the command. The selected option is active if either the ISN sequence (I) or GET NEXT (N) option is specified in the Command Option 2 field. The multifetch/prefetch option can improve performance by eliminating the time needed for single-record fetches. Refer to the section Using the Multifetch/Prefetch Feature for more information.
| Option | Description |
|---|---|
| F (first unused ISN) | Returns the next higher, unused, ISN for the specified file in the ISN field. The next unused ISN is determined by referring to the file control block (FCB). Do not use the F option when reading Adabas expanded files. |
| I (read by ISN sequence) | Reads the record identified by the ISN specified in the ISN field if the ISN is present in the file. If the ISN is not present in the file, the record with the next higher ISN is read and that record's ISN is returned in the ISN field. If the ISN is not present and no higher ISN is present in the file, no record is read and response code 3 (ADARSP003) is returned. |
| L (track LOB field position) | An L in the Command Option 2 field indicates that the position within a large object (LOB) field be tracked in the ACBISL (ISN lower limit) field. This option is useful when multiple L1/L4 commands are being issued in a series for a LOB field. This option can only be used if a LOB field is specified in the format buffer using LOB segment notation with asterisk notation in the bytenum specification. |
| N (GET NEXT) | Reads the records identified by the ISNs in an ISN list without the user having to provide the ISN of the record to be read with each L1 or L4 call. Adabas selects the ISN from the list and reads the record identified by that ISN. The ISN list to be used must be identified by the command ID field and must have been created previously by an Sx command. Response code 3 (ADARSP003) is returned when all the ISNs in the list have been selected. Refer to the section ISN List Processing for more information. |
If the command is processed successfully, the following information is returned in this field:
If the record buffer contains at least one valid field value, the leftmost two bytes contain the length (in binary form) of the compressed record accessed;
The rightmost two bytes contain the length (in binary form) of the decompressed fields selected by the format buffer and accessed.
If the L1 or L4 command returns a nonzero response code, the rightmost two bytes may contain a subcode defining the exact response code meaning. Response codes and their subcodes are defined in the Adabas Messages and Codes Manual documentation.
This field is used to provide an Adabas security password. If the database, file, or fields are security-protected, the user must provide a valid security password. Adabas sets the Additions 3 field to blanks during command processing to enhance password integrity.
This field is used to provide a cipher code. If the file is ciphered, the user must provide a valid cipher code. If the file is not ciphered, this field should be set to blanks.
Adabas sets any cipher code to blanks during command processing, and returns a version code and database ID in the rightmost (low-order) three bytes of this field. For more information, see the section Control Block Fields.
This field may be used to provide a separate format ID which is to be used to identify the internal format buffer used for this command, or to provide a global format ID.
If the high-order (leftmost) bit of the Additions 5 field is not set to 1, the value provided in the command ID field is used as the format ID as well.
If, however, this bit is set to 1, the fifth through eighth bytes of the Additions 5 field are used as the format ID.
If the two high-order (leftmost) bits of the first byte of Additions 5 field are set to one (B'11'), all eight bytes of the Additions 5 field are used as a global format ID (that is, the format ID can be used by several users at the same time).
See the section Command, Format, and Global Format IDs for more information and examples.
For the Adabas file definitions used in all the examples in this section, see File Definitions Used in Examples.
ISN 4 in file 1 is to be read. The values for fields AA and AB are to be returned.
| Command Code | L1 | |
|---|---|---|
| Command ID | bbbb (blanks) | only 1 record is to be read |
| File Number | 1 | |
| ISN | 4 | |
| Format Buffer Length | 6 | or larger |
| Record Buffer Length | 10 | or larger |
| Command Option 2 | b | GET NEXT or read ISN sequence options not used |
| Additions 3 | bbbbbbbb (blanks) | file not security-protected |
| Additions 4 | bbbbbbbb (blanks) | file is not ciphered |
| Format Buffer | AA,AB |
|---|
A set of records for which the ISNs have been obtained previously by a find command are to be read from file 2. The values for fields RA and XB are to be returned with the value for field XB to be returned with length 3 and format U.
| Command Code | L1 | |
|---|---|---|
| Command ID | ABCD | a nonblank CID is recommended for a series of read operations in which the same fields are being read in each record |
| File Number | 2 | |
| ISN | n | ISNs are taken from the ISN list created by the find command* |
| Format Buffer Length | 10 | or larger |
| Record Buffer Length | 11 | or larger |
| Command Option 2 | b | GET NEXT or read ISN sequence options not used |
| Additions 3 | password | file is security-protected |
| Additions 4 | bbbbbbbb (blanks) | file is not ciphered |
| Format Buffer | RA,XB,3,U |
|---|
* n indicates an ISN from the ISN list which resulted from the find command. The L1 call is repeated for each ISN in the ISN list.
The requirement as stated for example 2 may also be satisfied by using the GET NEXT option.
| Command Code | L1 | |
|---|---|---|
| Command ID | ABCD | CID of ISN list to be used |
| File Number | 2 | |
| ISN | 0 | the entire ISN list is to be selected starting with the first ISN in the list |
| Format Buffer Length | 10 | or larger |
| Record Buffer Length | 11 | or larger |
| Command Option 2 | N | GET NEXT option to be used |
| Additions 3 | password | file is security-protected |
| Additions 4 | bbbbbbbb (blanks) | file is not ciphered |
| Format Buffer | RA,XB,3,U |
|---|
The L1 call is repeated for each ISN in the ISN list. No changes to the control block are required between L1 calls. Response code 3 (ADARSP003) will be returned when all the ISNs in the list have been selected.
ISN 5 in file 2 is to be read and held for updating. The values for fields XC and XD are to be returned.
| Command Code | L4 | read with hold |
|---|---|---|
| Command ID | bbbb (blanks) | only 1 record to be read |
| File Number | 2 | |
| ISN | 5 | |
| Format Buffer Length | 6 | or larger |
| Record Buffer Length | 14 | or larger |
| Command Option 1 | b | response code 145 (ADARSP145) option not used |
| Command Option 2 | b | GET NEXT or read ISN sequence options not used |
| Additions 3 | password | file is security-protected |
| Additions 4 | bbbbbbbb (blanks) | file is not ciphered |
| Format Buffer | XC,XD |
|---|
File 1 is to be read using the read ISN sequence option. The values for fields AA, AB, and AC are to be returned.
| Command Code | L1 | |
|---|---|---|
| Command ID | BCDE | nonblank CID is recommended when a series of records for which the same fields are to be returned is to be read |
| File Number | 1 | |
| ISN | 1 | if ISN 1 is not present, the record of the next higher ISN in the file is read, and the ISN is returned in this field |
| Format Buffer Length | 6 | or larger |
| Record Buffer Length | 30 | or larger |
| Command Option 2 | I | read ISN sequence option invoked |
| Additions 3 | bbbbbbbb (blanks) | file is not security-protected |
| Additions 4 | bbbbbbbb (blanks) | file is not ciphered |
| Format Buffer | GA,AC. |
|---|
Adabas returns the ISN of the record which has been read in the ISN field of the control block. The record with the next higher ISN may be read by adding 1 to the ISN field and repeating the L1 command.
The record identified by ISN 2 in file 1 is to be read. The value for field AA, all values for the multiple-value field MF, and all occurrences of the periodic group GB are to be returned.
Issue a L1 call to obtain the count of the number of values which exist for MF, and the highest occurrence count for GB.
| Command Code | L1 | |
|---|---|---|
| Command ID | bbbb (blanks) | only 1 record is to be read |
| File Number | 1 | |
| ISN | 2 | |
| Format Buffer Length | 8 | or larger |
| Record Buffer Length | 2 | or larger |
| Command Option 2 | b | GET NEXT or read ISN sequence option not used |
| Format Buffer | MFC,GBC |
|---|
Assuming that the result of the above L1 call was the record containing four values for MF and six occurrences for GB, repeat the L1 call using the following format buffer:
AA,MF01-04,GB01-06
For each call, the length of the format and record buffers must be large enough to hold all entries and values.
When using this procedure to read a series of records, a valid command ID should be used in step 1, and no command ID (blanks) should be used for step 2 since the content of the format buffer may vary with each step 2 call.
An alternative solution for example 5 usually provides better performance if the number of values/occurrences is small (less than six) in a large percentage of the records.
Issue a L1 call in which the counts for MF and GB are requested, plus the expected number of values and occurrences of MF and GB, plus field AA.
Assuming that the expected number of values for MF is 2, and the expected number of occurrences of GB is 3, the format buffer for step 1 would be
AA,MFC,GBC,MF01-02,GB01-03.*
* Maximum performance is normally achieved if a number which will retrieve all of the values/occurrences in 90 per cent of the records is specified.
If either the count received for MF exceeds 2 or the count received for GB exceeds 3, a format buffer similar to that in step 2 of the previous example could be used to obtain the additional values and/or occurrences. Otherwise, no additional call is required.
This section describes ACBX interface direct calls for the L1 and L4 commands. It covers the following topics:
| Field | Position | Format | Before Adabas Call | After Adabas Call |
|---|---|---|---|---|
| 1-2 | --- | --- | --- | |
| Version Indicator | 3-4 | binary | F | U |
| 5-6 | --- | --- | --- | |
| Command Code | 7-8 | alphanumeric | F | U |
| 9-10 | --- | --- | --- | |
| Response Code | 11-12 | binary | --- | A |
| Command ID | 13-16 | alphanumeric/ binary | F | U |
| Database ID | 17-20 | numeric | F | U |
| File Number | 21-24 | numeric | F | U |
| 25-28 | --- | --- | --- | |
| ISN | 29-32 | binary | F | U* |
| 33-36 | --- | --- | --- | |
| ISN Lower Limit | 37-40 | binary | F | U |
| 41-48 | --- | --- | --- | |
| Command Option 1 | 49 | alphanumeric | F | U |
| Command Option 2 | 50 | alphanumeric | F | U |
| Command Option 3 (L4 only) | 51 | alphanumeric | F | U |
| 52-64 | --- | --- | --- | |
| Additions 3 | 69-76 | alphanumeric/ binary | F | A |
| Additions 4 | 77-84 | alphanumeric | F | A |
| Additions 5 | 85-92 | alphanumeric/ binary | F | U |
| 93-114 | --- | --- | --- | |
| Error Subcode | 115-116 | binary | --- | A |
| 117-128 | --- | --- | --- | |
| Compressed Record Length | 129-136 | binary | --- | A |
| Decompressed Record Length | 137-144 | binary | --- | A |
| Command Time | 145-152 | binary | --- | A |
| User Area | 153-168 | not applicable | --- | U |
| --- | 169-193 | do not touch | --- | --- |
| ABD and Buffer | Before Adabas Call | After Adabas Call |
|---|---|---|
| Format | F | U |
| Record | -- | A |
| Multifetch ** | -- | A |
where:
| F | Supplied by user before Adabas call |
| A | Supplied by Adabas |
| U | Unchanged after Adabas call |
| * | Except for special options |
| ** | The multifetch buffer is required only if the multifetch option is specified. |
| --- | Not used |
We recommend that you set unused ACBX fields to binary zeros before the direct call is initiated.
F2
L1 or L4
Adabas returns the response code for the command in this field. Response code 0 (ADARSP000) indicates that the command was executed successfully. Non-zero response codes, which can also have accompanying subcodes returned in the Error Subcode (ACBXERRC) field, are described in the Adabas Messages and Codes Manual documentation.
Response code 3 (ADARSP003) indicates an end-of-list condition (applicable only if the GET NEXT option is used).
If a series of records is to be read with a series of L1 or L4 calls, and the same fields are to be specified in the format buffer for each call, this field should be set to a non-blank, non-zero value. This results in a reduction of the time required to process each L1 or L4 call.
If the GET NEXT option is to be used, the command ID of the ISN list to be used must be specified in this field. The format buffer may not be changed between successive L1 or L4 calls when the GET NEXT option is used.
If only a single record is to be read, or if the format buffer is to be modified between L1 or L4 calls, this field should be set to blanks.
If the command ID value is X'FFFFFFFF', automatic command ID generation will be in effect. In this case, the Adabas nucleus will generate values for command ID beginning with X'00000001', and will increment the value by 1 for each L1 or L4 call. When specifying user-defined command IDs, the user must ensure that each command ID is unique.
See also the Additions 5 field for separate format ID and/or global format ID usage.
Use this field to specify the database ID. The Adabas call will be directed to this database.
This field is a four-byte binary field, but at this time only two-byte database IDs are supported. Therefore, the database ID should be specified in the low-order part (rightmost bytes) of the field, with leading binary zeros.
If this field is set to binary zeros, the Adabas API uses either the database ID from the ADARUN cards provided in DDCARD input data or the default database ID value provided in the LNKGBLS module linked with or loaded by the link routine.
Use this field to specify the number of the file to which the Adabas call should be directed.
This field is a four-byte binary field, but the file number should be specified in the low-order part (rightmost bytes) of the field, with leading binary zeros.
Use this field to specify the ISN of the record to be read.
If you specify the GET NEXT (N) option, Adabas selects ISNs from the ISN list identified by the command ID, reads the record of that ISN, and returns the ISN for the next record in this field; any specified ISN value is ignored.
If you specify the ISN sequence (I) option, you must also specify an ISN value in this field. The L1 or L4 command returns that ISN's data record in the record buffer.
If you specify the F option, the L1 or L4 command returns the next higher available ISN recorded in the file control block (FCB) in this field.
When a record is read, Adabas returns that record's ISN in this field, regardless of the option selected. With the option "F", this field returns the next higher unused ISN.
The ACBXISN field is a four-byte binary field embedded in the eight-byte ACBXISNG field, which is not yet used. Set the high-order part of the ACBXISNG field to binary zeros.
If either "M" or "O" (multifetch option) is specified in the Command Option 1 field, a non-zero value in this field determines the maximum number of records to be multifetched. If this value is zero, the number of records to be multifetched is limited by the record and ISN buffer lengths. Refer to the section Using the Multifetch/Prefetch Feature for more information.
If a partial LOB field is requested by this command and the Command Option 2 field is set to L, the ACBXISL field is used to keep track of the current position in the LOB value when multiple L1 or L4 calls are made for the field.
The ACBXISL field is a four-byte binary field embedded in the eight-byte ACBXISLG field, which is not yet fully used. Set the high-order part of the ACBXISLG field to binary zeros.
| Option | Description |
|---|---|
| F (first unused) | Returns the next highest unused ISN for the specified file in the ISN field. The next unused ISN is determined by referring to the file control block (FCB). Do not use the F option when reading Adabas expanded files. |
| M (multifetching) | Multifetch processing is performed for this command. |
| O (multifetching with the R option) | Multifetch processing and R option processing (see below) is performed for this command. |
| R (return) | Returns response code 145 (ADARSP145) if the record to be read and held by an L4 command is not available. |
Specifying the "M" or "O" option indicates that the multifetch option is to be used for the command. The selected option is active if either the ISN sequence (I) or GET NEXT (N) option is specified in the Command Option 2 field. The multifetch option can improve performance by eliminating the time needed for single-record fetches. Refer to the section Using the Multifetch/Prefetch Feature for more information.
| Option | Description |
|---|---|
| F (first unused ISN) | Returns the next higher, unused, ISN for the specified file in the ISN field. The next unused ISN is determined by referring to the file control block (FCB). Do not use the F option when reading Adabas expanded files. |
| I (read by ISN sequence) | Reads the record identified by the ISN specified in the ISN field if the ISN is present in the file. If the ISN is not present in the file, the record with the next higher ISN is read and that record's ISN is returned in the ISN field. If the ISN is not present and no higher ISN is present in the file, no record is read and response code 3 (ADARSP003) is returned. |
| L (track LOB field position) | An L in the Command Option 2 field indicates that the position within a large object (LOB) field be tracked in the ACBXISL (ISN lower limit) field. This option is useful when multiple L1/L4 commands are being issued in a series for a LOB field. This option can only be used if a LOB field is specified in the format buffer using LOB segment notation with asterisk notation in the bytenum specification. |
| N (GET NEXT) | Reads the records identified by the ISNs in an ISN list without the user having to provide the ISN of the record to be read with each L1 or L4 call. Adabas selects the ISN from the list and reads the record identified by that ISN. The ISN list to be used must be identified by the command ID field and must have been created previously by an Sx command. Response code 3 (ADARSP003) is returned when all the ISNs in the list have been selected. Refer to the section ISN List Processing for more information. |
The following command options are available for L4 commands only.
| Option | Description |
|---|---|
| C | Puts the record in shared hold status for the duration of the read operation. |
| Q | Puts the record in shared hold status until the next record in the read sequence is read or the read sequence or transaction is terminated, whichever happens first. This option is available for the L4 command when command option 2 is set to "N". |
| S | Puts the record in shared hold status until the end of the transaction. |
If the same record is placed in shared hold status more than once (using the C or S options or the Q option for different read sequences), it stays in shared hold status until all of the specified hold lifetimes have expired.
For complete information about shared hold updating, read Shared Hold Status.
This field is used to provide an Adabas security password. If the database, file, or fields are security-protected, the user must provide a valid security password. Adabas sets the Additions 3 field to blanks during command processing to enhance password integrity.
This field is used to provide a cipher code. If the file is ciphered, the user must provide a valid cipher code. If the file is not ciphered, this field should be set to blanks.
Adabas sets any cipher code to blanks during command processing, and returns a version code and database ID in the rightmost (low-order) three bytes of this field. For more information, see the section Control Block Fields.
This field may be used to provide a separate format ID which is to be used to identify the internal format buffer used for this command, or to provide a global format ID.
If the high-order (leftmost) bit of the Additions 5 field is not set to 1, the value provided in the command ID field is used as the format ID as well.
If, however, this bit is set to 1, the fifth through eighth bytes of the Additions 5 field are used as the format ID.
If the two high-order (leftmost) bits of the first byte of Additions 5 field are set to one (B'11'), all eight bytes of the Additions 5 field are used as a global format ID (that is, the format ID can be used by several users at the same time).
See the section Command, Format, and Global Format IDs for more information and examples.
If the command returns a nonzero response code, this field contains a subcode defining the exact response code meaning. Response codes and their subcodes are defined in the Adabas Messages and Codes Manual documentation.
This field returns the compressed record length when a record was read or written. This is the length of the compressed data processed by the successful Adabas call. If the logical data storage record spans multiple physical data records, the combined length of all associated physical records may not be known. In this case, Adabas returns high values in the low-order word of this field.
This field returns the decompressed record length. This is the length of the decompressed data processed by the successful call. If multiple record buffer segments are specified, this reflects the total length across all buffer segments.
The following buffers apply to L1 and L4 commands:
Qualify the fields to be read in this buffer. Descriptions of the syntax and examples of format buffer construction are provided in Defining Buffers.
A "C." in the first two positions of the format buffer causes the record to be returned in compressed instead of decompressed format.
Adabas returns the requested field values in this buffer. All values are returned according to the standard format and length of the field unless the user specifies a different length or format in the format buffer.
The ISN buffer is used only if the command-level multifetch option is requested and only if the direct call is made using the ACB interface. For more information, read Using the Multifetch/Prefetch Feature. When multifetching is used, the L1 and L4 commands return descriptor elements, each up to 16 bytes long, in the ISN buffer (see the section BT/ET Multifetch Processing).
The multifetch buffer is used only if the command-level multifetch option is requested and only if the direct call is made using the ACBX interface. For more information, read Using the Multifetch/Prefetch Feature. When multifetching is used, the L1 and L4 commands return descriptor elements, each up to 16 bytes long, in the multifetch buffer (see the section BT/ET Multifetch Processing).
