For more information about Adabas installation and prerequisites, read the various Adabas installation documents and the Adabas Operations Manual documentation.
Adabas Review version runs in three modes: local, batch, and hub.
In local mode, Adabas Review runs in the Adabas address space.
In batch mode, Adabas Review runs as a batch job.
In hub mode, Adabas Review runs as a server in its own address space with a client interface in the Adabas address space.
You must have Adabas 8.2 SP4 installed to use the new features in this release of Adabas Review.
This section covers the following topics:
The matrix below provides an overview of the compatibility of Adabas Review in local mode with other versions of Adabas and Adabas SVC.
Note:
This table only refers to compatibility between the Adabas Server
and the Adabas Review modules loaded from the server. For the compatibility of the
ADALNK client modules refer to the table further down..
| Adabas Review Version | Adabas Version | Status |
|---|---|---|
| 4.6 | 8.1 SP4 (CLOGLAYOUT=5) | Not compatible |
| 4.6 | 8.1 SP4 (CLOGLAYOUT=8) | Not compatible |
| 4.6 | 8.2 SP2, SP3, and SP4 (CLOGLAYOUT=5) | Not Compatible |
| 4.6 | 8.2 SP2 and SP3 (CLOGLAYOUT=8) | Not Compatible |
| 4.6 | 8.2 SP4 (CLOGLAYOUT=8) | Compatible |
Note:
This table only refers to compatibility between the Adabas Server
and the Adabas Review modules loaded from the server. For the compatibility of the
ADALNK client modules refer to the table further down..
| Hub Version | Adabas | Status |
|---|---|---|
| 4.4 | 8.1 SP4 | Compatible |
| 4.4 | 8.1 SP4 with the ADA814LX01 library | Compatible with zap RD441088 |
| 4.5 | 8.1 SP4 | Compatible |
| 4.5 | 8.2 | Compatible |
| 4.6 | 8.2 SP4 | Compatible |
Note:
In z/VSE environments, the hub node ID cannot be
greater than 255.
To get data for all Adabas Review fields (TP monitor-specific and Natural-specific fields) that are obtained in the Adabas client address space (ADALNK), the Adabas Review 4.6 exit REVEXIT (the REVEXIT1 entry point) and the ADALNK routines from Adabas 8.2 SP4. REVEXIT (the REVEXIT2 entry point) and ADALNK routines must also be used to obtain data for all client reporting fields.
Note:
REVEXIT2 is not available on BS2000, so the functionality supplied
by this is missing on this platform.
Due to changes in the interface, some incompatibilities exist between ADALNK and the Adabas Review REVEXIT exits.
The REVEXIT exits include REVEXIT1 (formerly REVEXITB) and REVEXIT2. REVEXIT should be linked with ADALNK during installation, with the appropriate Adabas link globals table parameters (LGBLSET). The link globals table parameters specified via LGBLSET identify which REVEXIT entry points (REVEXIT1 or REVEXIT2) are called. If LGBLSET parameter REVIEW=YES is set, then REVEXIT is called by ADALNK before the Adabas call as entry point REVEXIT1; if LGBLSET parameters RVCLNT and REVHID are also specified, REVEXIT is also called after the Adabas call as entry point REVEXIT2.
The modules used to perform the linkage between REVEXIT and ADALNK are provided with your Adabas Review installation with names in the format RDBLXsys, where sys is a three-character code representing the link environment (for example, MVS for z/OS environments, VSE for z/VSE, COM for Com-plete environments, IMS for IMS environments, and BS2 for BS2000 environments). For more information about performing this linkage, read the appropriate Adabas Review installation documentation.
Note:
A return code 4 from the link-edit of the globals table is acceptable
because it indicates that the Review exit (REVEXITB or REVEXIT1) has not been
resolved by this step. The next link-edit step in the sample jobs should
resolve this and finish with return code zero.
Using incompatible version of ADALNK and REVEXIT may lead to unpredictable errors. The following table describes the compatibility of different versions of ADALNK and REVEXIT.
The ADALNK of the TP monitor running SYSREVDB must include the REVEXIT exits. If the REVEXIT exits are not included, some features might not work correctly in SYSREVDB.
| Adabas ADALNK Module Versions | Adabas Review REVEXIT Module Versions | |||
|---|---|---|---|---|
| 4.4 SP1 | 4.5 SP1 | 4.5 SP2 | 4.6 | |
| 8.1 SP4 | Compatible | Compatible | Compatible | Not Compatible |
| 8.2 SP2 | Only compatible with zap RD441095 | Only compatible with zap RD451021 / RD451036 | Compatible | Not Compatible |
| 8.2 SP3 | Compatible | Compatible | Compatible | Not Compatible |
| 8.2 SP4 | Not Compatible | Not Compatible | Not Compatible | Compatible |
Due to changes in the display programs in SYSREVDB, you cannot use SYSREVDB in Adabas Review 4.4 (or earlier versions) to display the field contents of CMDRESP correctly, unless you stay with the old scale and algorithm. For information about converting CMDRESP history data from older versions of Adabas Review to Adabas Review 4.5, read Migration from Previous Versions.
All released Adabas Review zaps should be applied to the executables before completing installation.
This version of Adabas Review supports Natural version 4.2 SP4 and above.
If you will be using client reporting, zap NA77060 must be applied to support use of SYSREVDB activation of client reporting.
This version of Adabas Review supports version 8.2 of Adabas Cluster Services and Adabas Parallel Services.
This version of Adabas Review supports the following TP monitors:
Com-plete
Note:
Client monitoring is not yet supported under Com-plete in Adabas Review
4.6. All other Adabas Review 4.6 features are supported.
CICS
IMS/DC
TSO
