Version 8.2.3
 —  Reference  —

About ADARUN Parameters for Cluster Nuclei

Software AG recommends that you use your existing values (or the default settings) of the Adabas ADARUN parameters for each Adabas nucleus in a cluster, and then tune the values after analyzing the performance of the cluster. For more information about expected differences, read Performance and Tuning.

Session statistics can be used to determine the best settings for each parameter. The statistics are printed automatically at the end of a session, but can also be displayed using nucleus or ADACOM operator commands during the session.

For your convenience, ADARUN parameters that are most significant to Adabas Cluster Services usage are described in Useful ADARUN Parameters.

This document covers the following topics:


Global ADARUN Parameters

ADARUN parameters that must be the same for all nuclei in the cluster are called global.

Some global parameters are set at nucleus startup and cannot be changed during the ensuing session; other global parameters can be changed during a session:

Top of page

ADARUN Parameter Usage in Cluster Environments

A cluster nucleus makes use of:

A few Adabas ADARUN parameters are not available to a cluster nuclei (No).

In the following table, the "N/A" column indicates which ADARUN parameters are not available to a cluster nucleus, the "LF" column indicates whether the parameter is a locally fixed parameter, the "LM" column indicates whether the parameter is a locally modifiable parameter, the "GF" column indicates whether the parameter is a globally fixed parameter, and the "GM" column indicates whether the parameter is a globally modifiable parameter.

Note:
The parameters for which links are provided have particular use in Adabas Cluster Services environments and are described in Useful ADARUN Parameters for Adabas Cluster Services. A description of every ADARUN parameter (including those not described in the Adabas Cluster Services documentation) can be found in the Adabas mainframe operations documentation.

Parameter Usage N/A LF LM GF GM
AOSLOG Log to DDPRINT commands issued by AOS or ADADBS OPERCOM that modify the active nucleus     LM    
AREXCLUDE Exclude file(s) from autorestart   LF      
ARMNAME Name used to activate ARM   LF      
ASSOCACHE Controller caching control for the Associator component   LF      
ASYTVS Asynchronous buffer flush based on volser     LM    
CACHE Load ADACSH (Adabas Caching Facility)   LF      
CACTIVATE RABN range activation (Adabas Caching Facility)     LM    
CASSODSP Associator RABNs cached for data space (Adabas Caching Facility)     LM    
CASSOEXT Associator RABNs cached for extended memory (Adabas Caching Facility)     LM    
CASSOHSP Associator RABNs cached for hiperspace (Adabas Caching Facility)     LM    
CASSOV64 Associator RABNs cached for virtual 64 (Adabas Caching Facility)     LM    
CASSOMAXS Associator cache space unit size (Adabas Caching Facility)     LM    
CBUFNO Read buffer count for concurrent I/O (Adabas Caching Facility)     LM    
CCTIMEOUT Cache space area inactivity time (Adabas Caching Facility)     LM    
CDATADSP Data Storage RABNs cached for data space (Adabas Caching Facility)     LM    
CDATAEXT Data Storage RABNs cached for extended memory (Adabas Caching Facility)     LM    
CDATAHSP Data Storage RABNs cached for hiperspace (Adabas Caching Facility)     LM    
CDATAV64 Data Storage RABNs cached for virtual 64 (Adabas Caching Facility)     LM    
CDATAMAXS Data Storage cache space unit size (Adabas Caching Facility)     LM    
CDEMAND Lowest acceptable Adabas buffer efficiency level (Adabas Caching Facility)     LM    
CDISPSTAT RABN range statistic display location (Adabas Caching Facility)     LM    
CDXnn Collation descriptor user exit(s)   LF      
CEXCLUDE Excluded command types (Adabas Caching Facility)     LM    
CFILE File or file range to be cached (Adabas Caching Facility)     LM    
CLOGBMAX Maximum size of a log buffer   LF      
CLOGDEV Multiple command log device   LF      
CLOGLAYOUT Define command log format       GF  
CLOGMAX Maximum size of all logged buffers allowed for an Adabas command.   LF      
CLOGMRG Automatic command log merge control in a cluster environment         GM
CLOGSIZE Multiple command log size (blocks)   LF      
CLUCACHENAME Cluster cache structure name (Adabas Cluster Services only)       GF  
CLUCACHESIZE Cluster cache area size (Adabas Parallel Services only)         GM
CLUCACHETYPE Cluster cache area storage type (Adabas Parallel Services only)         GM
CLUCACHEUNCHANGED Shared cache unchanged block control (Adabas Parallel Services only)   LF      
CLUGROUPNAME Cluster group name (Adabas Cluster Services only)       GF  
CLULOCKNAME Cluster lock structure name (Adabas Cluster Services only)       GF  
CLULOCKSIZE Cluster lock area size (Adabas Parallel Services only)         GM
CLUSTER Adabas cluster session control       GF  
CMADDR Starting address of the GETMAIN common memory pool above the 16M line   LF      
CMAXCSPS Storage area count for ADACSH (Adabas Caching Facility)     LM    
CMDQMODE Command queue memory pool location   LF      
CMFIX GETMAIN common memory pool fixed location indicator above the 16M line   LF      
CMLADDR Starting address of the GETMAIN common memory pool below the 16M line   LF      
CMLFIX GETMAIN common memory pool fixed location indicator below the 16M line   LF      
CMLSCOPE Control for access to the GETMAIN common memory pool below the 16M line   LF      
CMLSIZE Indicator for GETMAIN performance in common memory pool below the 16M line   LF      
CMSCOPE Control for access to the GETMAIN common memory pool above the 16M line   LF      
CMSIZE Indicator for GETMAIN performance in common memory pool above the 16M line   LF      
CRETRY Cache space retry interval (Adabas Caching Facility)     LM    
CSTORAGE RABN caching activation (Adabas Caching Facility)   LF      
CT Command time limit (seconds)         GM
CWORKSTORAGE Cache space type (Adabas Caching Facility)     LM    
CWORK2FAC Percentage of Work part 2 cached (Adabas Caching Facility)     LM    
CWOFK3FAC Percentage of Work part 3 cached (Adabas Caching Facility)     LM    
CXFILE Excluded files (Adabas Caching Facility)     LM    
DATACACHE Controller caching control for the Data Storage component   LF      
DBID Database ID (physical)       GF  
DEVICE Device type of the first ASSO extent       GF  
DIRRATIO Ratio of directory entries to data elements in a cluster cache structure/area         GM 
DSF Delta Save Facility control       GF  
DSFEX1 Delta Save Facility user exit   LF      
DTP1 Distributed transaction processing control       GF  
DUALCLD Dual command log device   LF      
DUALCLS Dual command log size (blocks)   LF      
DUALPLD Dual protection log device   LF      
DUALPLS Dual protection log size (blocks)   LF      
ELEMENTRATIO Ratio of directory entries to data elements in a cluster cache structure/area         GM
EXCPVR EXCP or EXCPVR indicator when APF-authorized   LF      
FASTPATH Adabas Fastpath control   LF      
FMXIO Limit parallel I/O operations by LFIOP flush processing     LM    
FORCE Overwrite IDTE   LF      
GROUPS Indicator for BS2000 interprocess communication limited to users with the same logon ID   LF      
HEXnn Hyperdescriptor exit(s)   LF       
IDTNAME Name for alternate ID table   LF      
IDTPSUP IDT name suppression indicator   LF      
IGNDIB Ignore DIB entry   LF      
IGNDTP Ignore distributed transaction processing area (Work part 4)   LF      
INFOBUFFERSIZE Size of information buffer pool   LF      
INTNAS Interval between nucleus statistic checkpoints (SYNS 60)         GM
LARGEPAGE Large page use indicator   LF      
LBP Length of buffer pool   LF      
LCP Length of security pool   LF      
LDEUQP Length of unique (UQ) descriptor pool   LF      
LDTP Length of distributed transaction processing area (Work part 4)   LF      
LFIOP2 Length of asynchronous flush pool   LF      
LFP Length of internal format buffer pool   LF      
LI Length of ISN list table (TBI)   LF      
LNKGNAME Link globals table name   LF      
LOCAL3 Nucleus (cluster) unknown to the network       GF  
LOGABDX Log ABDs   LF      
LOGCB Log control block     LM    
LOGCLEX Log command log extension (CLEX)   LF       
LOGFB Log format buffer     LM    
LOGGING Logging of Adabas commands     LM    
LOGIB Log ISN buffer     LM    
LOGIO Log I/O activity     LM    
LOGMB Log multifetch buffers   LF      
LOGRB Log record buffer     LM    
LOGSB Log search buffer     LM    
LOGSIZE Maximum command log size   LF      
LOGUX Log user exit B data     LM    
LOGVB Log value buffer     LM    
LOGVOLIO Extended I/O list log indicator     LM    
LOGWARN PLOG/CLOG status check frequency     LM    
LP Length of data protection area (Work part 1)   LF      
LQ Length of sequential command table   LF      
LRDP Length of the redo pool in cluster environments.   LF      
LRPL Size of Adabas or Event Replicator replication pools   LF      
LS Length of sort area     LM    
LU Length of intermediate user buffer         GM
LWKP2 Length of ISN list processing area (Work part 2)   LF      
LWP Length of Adabas work pool   LF      
MODE2 Mode of operation       GF  
MSGBUF Size of the message buffer   LF      
MSGCONSL Case of messages on message console   LF      
MSGDRUCK Case of messages in DD/DRUCK data set   LF      
MSGPRINT Case of messages sent to DD/PRINT data set   LF      
MXCANCEL Timeout threshold for a cancel request between cluster nuclei(Adabas Cluster Services and Adabas Parallel Services)     LM    
MXCANCELWARN Timeout threshold for a cancel request warning between cluster nuclei (Adabas Cluster Services and Adabas Parallel Services)     LM    
MXMSG Maximum message reply time between cluster nuclei (Adabas Cluster Services and Adabas Parallel Services)     LM    
MXMSGWARN Timeout threshold for a message reply warning between cluster nuclei (Adabas Cluster Services and Adabas Parallel Services)     LM    
MXSTATUS XCF status monitoring heartbeat interval (Adabas Cluster Services)     LM    
MXTNA Maximum inactivity time limit override for a user         GM
MXTSX Maximum Sx execution time limit override for a user         GM
MXTT Maximum transaction time limit override for a user         GM
MXWTOR Self-termination query operator response interval (Adabas Cluster Services and Adabas Parallel Services)     LM    
NAB Number of attached buffers   LF      
NC Number of command queue elements   LF      
NCLOG Number of command logs   LF      
NH Number of hold queue elements   LF      
NISNHQ Number of ISNs in hold queue for user         GM
NONDES Non-descriptor searches         GM
NPLOG Number of protection logs   LF      
NPLOGBUFFERS Number of PLOG protection I/O buffers   LF      
NQCID Number of active command IDs per user         GM
NSISN Number of ISNs per ISN table element     LM    
NT Number of threads   LF      
NU Number of user queue elements   LF      
NUCID Cluster nucleus ID   LF      
NWORK1BUFFERS Number of Work part 1 protection I/O buffers   LF      
OPENRQ Open command required       GF  
PAMREQS Maximum number of BS2000 PAM blocks that can be transferred in a single PAM macro request   LF      
PGFIX I/O control block page request indicator   LF      
PLOGDEV Multiple protection log device   LF      
PLOGRQ Protection log required       GF  
PLOGSIZE Multiple protection log size (blocks)   LF      
PREFETCH4 Prefetch/multifetch feature control (see note below) N/A        
PREFICMD4 Include command from prefetch/multifetch (see note below) N/A        
PREFIFIL4 Include file from prefetch/multifetch (see note below) N/A        
PREFNREC4 Multifetch record count (see note below) N/A        
PREFSBL4 Prefetch single buffer length (see note below) N/A        
PREFSTDD4 Job statement label for location for multifetch statistics N/A        
PREFTBL4 Prefetch total buffer length (see note below) N/A        
PREFXCMD4 Exclude command from prefetch/multifetch (see note below) N/A        
PREFXFIL4 Exclude file from prefetch/multifetch (see note below) N/A        
PROGRAM The program to be run   LF      
QBLKSIZE Sequential data set block size (optimized by ADAIOR)   LF      
READONLY2 Read-only session control     LM    
REPLICATION Replication indicator   LF      
REVFILTER Adabas Review record filtering indicator   LF      
REVIEW Adabas Review control     LM    
REVLOGBMAX Maximum number of bytes of a logged buffer for Adabas Review   LF      
REVLOGMAX Maximum size of all logged buffers for an Adabas Review command   LF      
RPLCONNECTCOUNT Number of connection attempts for replication   LF      
RPLCONNECTINTERVAL Connection attempt interval for replication   LF      
RPLPARMS Location of replication definitions   LF      
RPLSORT Replication transaction data sorting indicator   LF      
RPLWARNINGINCREMENT Replication pool usage warning message interval   LF      
RPLWARNINTERVAL Replication pool usage warning message suppression interval   LF      
RPLWARNMESSAGELIMIT Replication pool usage warning message limit before suppression   LF      
RPWARNPERCENT Replication pool usage threshold   LF      
SMF Adabas SMF recording control   LF      
SMF89 Type 89 SMF record control   LF      
SMFDETAIL SMF record detail section control     LM    
SMFINTERVAL SMF interval record control     LM    
SMFRECNO SMF user-defined record number control     LM    
SMFSUBSYS IBM or user-defined SMF subsystem control     LM    
SMGT Error handling (PIN) facility control   LF      
SORTCACHE Controller caching control for the Adabas sort area component   LF      
SPT Adabas triggers and stored procedures control       GF  
SRLOG Spanned record logging control   LF      
SUBMPSZ Common memory pool size   LF      
SVC SVC number   LF      
SWITCHNR BS2000 job switch number   LF      
TAPEREL End-of-file processing for tapes or cartridges   LF      
TARGETID Unique Entire Net-Work target ID   LF      
TASKCTGY BS2000 Adabas task category   LF      
TCPIP TCP/IP access control     LM    
TCPURL TCP/IP universal resource locator (URL)     LM    
TEMPCACHE Controller caching for the Adabas temp area component   LF      
TFLUSH2 Synchronous buffer flush time     LM    
TLSCMD Time limit for S1, S2, and S4 complex searches (seconds)         GM
TMDRQ3 Number of entries in Adabas Transaction Manager internal request queue   LF      
TMETDATA3 Databases storing Adabas Transaction Manager ET data   LF      
TMGTT3 Time limit in which an Adabas Transaction Manager global transaction can be opened without being prepared   LF      
TMLOG3 Logging option for Adabas Transaction Manager     LM    
TMMSGSEV3 Severity threshold for suppression of Adabas Transaction manager warning messages   LF      
TMRESTART3 Adabas Transaction Manager problematic transaction restart handling   LF      
TMSYNCMGR3 Indicator for Adabas Transaction Manager interaction with external transaction coordinator   LF      
TMTCIDPREF3 Adabas Transaction Manager prefix for dynamically allocated client IDs   LF      
TNAA Non-activity time limit (access-only users)         GM
TNAE Non-activity time limit (ET logic users)         GM
TNAX Non-activity time limit (exclusive update users)         GM
TT Transaction time limit         GM
UEXnn User exits: 1, 3, 4, 5, 8   LF      
User exits: 2, 12       GF  
User exits: 6, 9 (for utilities) N/A        
UEXSMF SMF user exit module name   LF      
UTIONLY Utilities-only session       GF  
V64BIT Virtual storage above the 2G bar usage indicator   LF      
VISTA Adabas Vista control       GF  
WORKCACHE Controller caching for the Adabas work area component   LF      

Notes:

  1. Adabas Cluster Services and Adabas Parallel Services 8.2 do not support DTP=TM, but it does support DTP=RM.
  2. Adabas Cluster Services and Adabas Parallel Services 8.2 do not support LFIOP=0, MODE=SINGLE, READONLY=YES, or TFLUSH.
  3. Adabas Cluster Services and Adabas Parallel Services 8.2 do not support the LOCAL=YES and all TM*parameters
  4. The PREFxxx parameters are used with application programs (PROGRAM=USER) making Adabas calls. They have no effect when specified for an Adabas nucleus.

Top of page