
	Version 8.2.4	SEARCH INDEX CONTENTS \| PDF PAGE PDF BOOKS \| HOME UP PREV NEXT

— Utilities —

JCL/JCS Requirements and Examples

This section describes the job control information required to run ADASAV with BS2000, z/OS, and z/VSE systems and shows examples of each of the job streams.

This document covers the following topics:

BS2000
z/OS
z/VSE

BS2000

Data Set	Link Name	Storage	More Information
Associator	DDASSOR`n`	disk
Data Storage	DDDATAR`n`	disk
Work	DDWORKR1 DDWORKR`n` (1-9) to DDWORK`nn` (10-32) in cluster environments	disk	A Work data set is not required for: any ADASAV SAVE functions ADASAV RESTONL FMOVE and ADASAV RESTONL FILES functions ADASAV RESTORE FMOVE and ADASAV RESTORE FILES functions ADASAV RESTPLOG functions A Work data set is recommended for: ADASAV RESTONL and ADASAV RESTONL GCB functions ADASAV RESTORE and ADASAV RESTORE GCB functions In these cases, if a Work data set is specified, the ADASAV function resets it; if a Work data set is not specified, no Work data sets are reset. Note: In an Adabas Cluster Services or Adabas Parallel Services cluster, where each cluster has its own Work data set, the Work data sets of all nuclei in the cluster should be specified for the RESTONL/RESTORE or RESTONL GCB/RESTORE GCB functions. If a database is restored and the Work data set has not been reset, nucleus error 72 (PARM ERROR 72) may occur. To resolve this, you can reset any Work data sets using the ADAFRM utility.
Recovery log (RLOG)	DDRLOGR1	disk	Required for ADARAI
Backup copy	DDSAVE1-8	tape/ disk	Required for SAVE
Dual copy	DDDUAL1-8	tape/ disk	Required for SAVE with two backup copies
Backup copy (input to the RESTORE function)	DDREST1-8	tape/ disk	Required for RESTORE and RESTONL
Sequential protection log	DDPLOG	tape/ disk	Required for RESTONL and RESTPLOG
ADARUN parameters	SYSDTA/ DDCARD		Operations
ADASAV parameters	SYSDTA/ DDKARTE
ADARUN messages	SYSOUT/ DDPRINT		Messages and Codes
ADASAV messages	SYSLST/ DDDRUCK		Messages and Codes

Note:
For RESTONL, the input SAVE tapes and the sequential protection log can be concatenated, using the name DDREST1.

ADASAV JCL Examples (BS2000)

Save Files, Save Database

In SDF Format:

/.ADASAV LOGON
 /MODIFY-TEST-OPTIONS DUMP=YES
 /REMARK *
 /REMARK * A D A S A V SAVE FILES, SAVE DATABASE
 /REMARK *
 /DELETE-FILE ADAyyyyy.SAVE1
 /SET-JOB-STEP
 /CREATE-FILE ADAyyyyy.SAVE1,SUP=TAPE(DEVICE=TAPE-C1,VOL=SAV101),-
 /  PROT=(USER-ACCESS=ALL-USERS)
 /SET-JOB-STEP
 /DELETE-FILE ADAyyyyy.DUAL1
 /SET-JOB-STEP
 /CREATE-FILE ADAyyyyy.DUAL1,SUP=TAPE(DEVICE=TAPE-C1,VOL=SAV101),-
 /  PROT=(USER-ACCESS=ALL-USERS)
 /SET-JOB-STEP
 /ASS-SYSLST L.SAV.SAVE
 /ASS-SYSDTA *SYSCMD
 /SET-FILE-LINK DDLIB,ADAvrs.MOD
 /SET-FILE-LINK DDASSOR1,ADAyyyyy.ASSO,SHARE-UPD=YES
 /SET-FILE-LINK DDDATAR1,ADAyyyyy.DATA,SHARE-UPD=YES
 /SET-FILE-LINK DDSAVE1,ADAyyyyy.SAVE1,TAPE(FILE-SEQ=1)
 /SET-FILE-LINK DDDUAL1,ADAyyyyy.DUAL1,TAPE(FILE-SEQ=1)
 /START-PROGRAM *M(ADA.MOD,ADARUN),PR-MO=ANY
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV SAVE TWOCOPIES
 /LOGOFF SYS-OUTPUT=DEL

In ISP Format:

/.ADASAV LOGON
 /OPTION MSG=FH,DUMP=YES
 /REMARK *
 /REMARK * A D A S A V SAVE FILES, SAVE DATABASE
 /REMARK *

/SYSFILE SYSLST=L.SAV.SAVE
 /FILE ADA.MOD,LINK=DDLIB
 /FILE ADAyyyyy.ASSO ,LINK=DDASSOR1,SHARUPD=YES
 /FILE ADAyyyyy.DATA ,LINK=DDDATAR1,SHARUPD=YES
 /FILE ADAyyyyy.SAVE1 ,LINK=DDSAVE1 ,DEVICE=TAPE-C1,VOLUME=SAV101
 /FILE ADAyyyyy.DUAL1 ,LINK=DDDUAL1 ,DEVICE=TAPE-C1,VOLUME=SAV201
 /EXEC (ADARUN,ADA.MOD)
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV SAVE TWOCOPIES
 /LOGOFF NOSPOOL

Restore Files from SAVE Data Sets Created Online

In SDF Format:

/.ADASAV LOGON
 /MODIFY-TEST-OPTIONS DUMP=YES
 /REMARK *
 /REMARK * A D A S A V RESTORE FILES, RESTORE DATABASE
 /REMARK * FROM ONLINE CREATED SAVE DATASETS
 /REMARK *
 /ASS-SYSLST L.SAV.REON
 /ASS-SYSDTA *SYSCMD
 /SET-FILE-LINK DDLIB,ADAvrs.MOD
 /SET-FILE-LINK DDASSOR1,ADAyyyyy.ASSO,SHARE-UPD=YES
 /SET-FILE-LINK DDDATAR1,ADAyyyyy.DATA,SHARE-UPD=YES
 /SET-FILE-LINK DDREST1,ADAyyyyy.SAVE1                  
 /SET-FILE-LINK DDPLOG,ADAyyyyy.PLOG                   
 /START-PROGRAM *M(ADA.MOD,ADARUN),PR-MO=ANY
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTONL FILES=2,PLOGNUM=ppp,SYN1=43
 /LOGOFF SYS-OUTPUT=DEL

In ISP Format:

/.ADASAV LOGON
 /OPTION MSG=FH,DUMP=YES
 /REMARK *
 /REMARK * A D A S A V RESTORE FILES, RESTORE DATABASE
 /REMARK * FROM ONLINE CREATED SAVE DATASETS
 /REMARK *

/SYSFILE SYSLST=L.SAV.REON
 /FILE ADA.MOD,LINK=DDLIB
 /FILE ADAyyyyy.ASSO ,LINK=DDASSOR1,SHARUPD=YES
 /FILE ADAyyyyy.DATA ,LINK=DDDATAR1,SHARUPD=YES
 /FILE ADAyyyyy.SAVE1 ,LINK=DDREST1
 /FILE ADAyyyyy.PLOG ,LINK=DDPLOG
 /EXEC (ADARUN,ADA.MOD)
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTONL FILES=2,PLOGNUM=ppp,SYN1=43
 /LOGOFF NOSPOOL

Restore Database

In SDF Format:

/.ADASAV LOGON
 /MODIFY-TEST-OPTIONS DUMP=YES
 /REMARK *
 /REMARK * ADASAV:
 /REMARK * EXAMPLE HOW TO USE ADASAV TO RESTORE THE
 /REMARK * ENTIRE DATABASE /REMARK *
 /REMARK *
 /DELETE-FILE ADAyyyyy.SAVE1
 /SET-JOB-STEP
 /IMPORT-FILE
SUP=TAPE(F-NAME=ADAyyyyy.SAVE1,DEV-TYPE=TAPE-C1,VOL=SAV101)
 /SET-JOB-STEP
 /ASS-SYSLST L.SAV.REST
 /ASS-SYSDTA *SYSCMD
 /SET-FILE-LINK DDLIB,ADAvrs.MOD
 /SET-FILE-LINK DDASSOR1,ADAyyyyy.ASSO,SHARE-UPD=YES
 /SET-FILE-LINK DDDATAR1,ADAyyyyy.DATA,SHARE-UPD=YES
 /SET-FILE-LINK DDWORKR1,ADAyyyyy.WORK,SHARE-UPD=YES
 /SET-FILE-LINK DDREST1,ADAyyyyy.SAVE1,TAPE(FILE-SEQ=1),ACC-METH=SAM,-
 /  BUFF-LEN=32768,REC-FORM=V
 /START-PROGRAM *M(ADA.MOD,ADARUN),PR-MO=ANY
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTORE OVERWRITE
 /LOGOFF SYS-OUTPUT=DEL

In ISP Format:

/.ADASAV LOGON
 /OPTION MSG=FH,DUMP=YES
 /REMARK *
 /REMARK * ADASAV:
 /REMARK * EXAMPLE HOW TO USE ADASAV TO RESTORE THE
 /REMARK * ENTIRE DATABASE
 /REMARK *
 /SYSFILE SYSLST=L.SAV.REST
 /FILE ADA.MOD,LINK=DDLIB
 /FILE ADAyyyyy.ASSO ,LINK=DDASSOR1,SHARUPD=YES
 /FILE ADAyyyyy.DATA ,LINK=DDDATAR1,SHARUPD=YES
 /FILE ADAyyyyy.WORK ,LINK=DDWORKR1,SHARUPD=YES
 /FILE ADAyyyyy.SAVE1 ,LINK=DDREST1,DEVICE=TAPE-C1,VOLUME=ADA001,-
 /     STATE=FOREIGN.-                                              
 /     FCBTYPE=SAM,RECFORM=V,RECSIZE=,BLKSIZE=32768,LABEL=STD       
 /EXEC (ADARUN,ADA.MOD)
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTORE OVERWRITE
 /LOGOFF NOSPOOL

Restore Protection Log after an Interrupted RESTONL Function

In SDF Format:

/.ADASAV LOGON
 /MODIFY-TEST-OPTIONS DUMP=YES
 /REMARK *
 /REMARK * A D A S A V RESTORE PROTECTION LOG
 /REMARK *
 /ASS-SYSLST L.SAV.REPL
 /ASS-SYSDTA *SYSCMD
 /SET-FILE-LINK DDLIB,ADAvrs.MOD
 /SET-FILE-LINK DDASSOR1,ADAyyyyy.ASSO,SHARE-UPD=YES
 /SET-FILE-LINK DDDATAR1,ADAyyyyy.DATA,SHARE-UPD=YES
 /SET-FILE-LINK DDPLOG,ADAyyyyy.PLOG                   
 /START-PROGRAM *M(ADA.MOD,ADARUN),PR-MO=ANY
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTPLOG FILES=2,PLOGNUM=ppp,SYN1=43
 /LOGOFF SYS-OUTPUT=DEL

In ISP Format:

/.ADASAV LOGON
 /OPTION MSG=FH,DUMP=YES
 /REMARK *
 /REMARK * A D A S A V RESTORE PROTECTION LOG
 /REMARK *
 /SYSFILE SYSLST=L.SAV.REPL
 /FILE ADA.MOD,LINK=DDLIB
 /FILE ADAyyyyy.ASSO ,LINK=DDASSOR1,SHARUPD=YES
 /FILE ADAyyyyy.DATA ,LINK=DDDATAR1,SHARUPD=YES
 /FILE ADAyyyyy.PLOG ,LINK=DDPLOG
 /EXEC (ADARUN,ADA.MOD)
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTPLOG FILES=2,PLOGNUM=ppp,SYN1=43
 /LOGOFF NOSPOOL

Restore Files from SAVE Data Sets Created Offline

In SDF Format:

/.ADASAV LOGON
 /MODIFY-TEST-OPTIONS DUMP=YES
 /REMARK *
 /REMARK * A D A S A V RESTORE FILES, RESTORE DATABASE
 /REMARK * FROM OFFLINE CREATED SAVE DATASETS
 /REMARK *
 /ASS-SYSLST L.SAV.REFM
 /ASS-SYSDTA *SYSCMD
 /SET-FILE-LINK DDLIB,ADAvrs.MOD
 /SET-FILE-LINK DDASSOR1,ADAyyyyy.ASSO,SHARE-UPD=YES
 /SET-FILE-LINK DDDATAR1,ADAyyyyy.DATA,SHARE-UPD=YES
 /SET-FILE-LINK DDREST1,ADAyyyyy.SAVE1                  
 /START-PROGRAM *M(ADA.MOD,ADARUN),PR-MO=ANY
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTORE FMOVE=2
 /LOGOFF SYS-OUTPUT=DEL

In ISP Format:

/.ADASAV LOGON
 /OPTION MSG=FH,DUMP=YES
 /REMARK *
 /REMARK * A D A S A V RESTORE FILES, RESTORE DATABASE
 /REMARK * FROM OFFLINE CREATED SAVE DATASETS
 /REMARK *
 /SYSFILE SYSLST=L.SAV.REFM
 /FILE ADA.MOD ,LINK=DDLIB
 /FILE ADAyyyyy.ASSO ,LINK=DDASSOR1,SHARUPD=YES
 /FILE ADAyyyyy.DATA ,LINK=DDDATAR1,SHARUPD=YES
 /FILE ADAyyyyy.SAVE1 ,LINK=DDREST1
 /EXEC (ADARUN,ADA.MOD)
 ADARUN PROG=ADASAV,DB=yyyyy,IDTNAME=ADABAS5B
 ADASAV RESTORE FMOVE=2
 /LOGOFF NOSPOOL

z/OS

Data Set	DD Name	Storage	More Information
Associator	DDASSOR`n`	disk
Data Storage	DDDATAR`n`	disk
Work	DDWORKR1 DDWORKR`n` (1-9) to DDWORK`nn` (10-32) in cluster environments	disk	A Work data set is not required for: any ADASAV SAVE functions ADASAV RESTONL FMOVE and ADASAV RESTONL FILES functions ADASAV RESTORE FMOVE and ADASAV RESTORE FILES functions ADASAV RESTPLOG functions A Work data set is recommended for: ADASAV RESTONL and ADASAV RESTONL GCB functions ADASAV RESTORE and ADASAV RESTORE GCB functions In these cases, if a Work data set is specified, the ADASAV function resets it; if a Work data set is not specified, no Work data sets are reset. Note: In an Adabas Cluster Services or Adabas Parallel Services cluster, where each cluster has its own Work data set, the Work data sets of all nuclei in the cluster should be specified for the RESTONL/RESTORE or RESTONL GCB/RESTORE GCB functions. If a database is restored and the Work data set has not been reset, nucleus error 72 (PARM ERROR 72) may occur. To resolve this, you can reset any Work data sets using the ADAFRM utility.
Recovery log (RLOG)	DDRLOGR1	disk	Required for ADARAI
Backup copy	DDSAVE1-8	tape/ disk	Required for SAVE
Dual copy	DDDUAL1-8	tape/ disk	Required for SAVE with two backup copies
Backup copy (input for RESTORE function)	DDREST1-8	tape/ disk	Required for RESTORE and RESTONL
Sequential protection log	DDPLOG	tape/ disk	Required for RESTONL and RESTPLOG
ADARUN parameters	DDCARD	reader	Operations
ADASAV parameters	DDKARTE	reader
ADARUN messages	DDPRINT	printer	Messages and Codes
ADASAV messages	DDDRUCK	printer	Messages and Codes

Note:
For RESTONL, the input SAVE tapes and the sequential protection log can be concatenated, using the name DDREST1.

ADASAV JCL Examples (z/OS)

Save Database

//ADASAV    JOB
//*
//*    ADASAV:
//*       EXAMPLE HOW TO USE ADASAV TO SAVE THE
//*       ENTIRE DATABASE
//*
//SAVE     EXEC PGM=ADARUN
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD          <=== ADABAS LOAD
//*
//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1    <=== ASSO
//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.DATAR1    <=== DATA
//DDSAVE1   DD   DSN=EXAMPLE.DByyyyy.DDSAVE1,UNIT=TAPE, <=== OUTPUT
//            DISP=(,CATLG),VOL=SER=ADABCK
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X
//DDCARD    DD   *
ADARUN PROG=ADASAV,SVC=xxx,DE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADASAV SAVE
/*

Refer to ADASAV in the JOBS data set for this example.

Save Database with Two Copies of Output

//ADASAVT   JOB
//*
//*    ADASAV:
//*       EXAMPLE HOW TO USE ADASAV TO SAVE THE
//*       ENTIRE DATABASE CREATING TWO COPIES OF THE OUTPUT
//*
//SAVE     EXEC PGM=ADARUN
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD          <=== ADABAS LOAD
//*

//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1    <=== ASSO
//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.DATAR1    <=== DATA
//DDSAVE1   DD   DSN=EXAMPLE.DByyyyy.DDSAVE1,UNIT=TAPE, <=== OUTPUT
//            DISP=(,CATLG),VOL=SER=ADABCK
//DDDUAL1   DD   DSN=EXAMPLE.DByyyyy.DDSAVD1,UNIT=TAPE, <=== OUTPUT
//            DISP=(,CATLG),VOL=SER=ADABCK1
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X
//DDCARD    DD   *
ADARUN PROG=ADASAV,SVC=xxx,DE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADASAV SAVE TWOCOPIES
/*

Refer to ADASAVT in the JOBS data set for this example.

Restore Database

//ADASAVR   JOB
//*
//*    ADASAV:
//*       EXAMPLE HOW TO USE ADASAV TO RESTORE THE
//*       ENTIRE DATABASE
//*
//RESTORE  EXEC PGM=ADARUN
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD       <=== ADABAS LOAD
//*
//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1 <=== ASSO
//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.DATAR1 <=== DATA
//DDWORKR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.WORKR1 <=== WORK
//DDREST1   DD   DSN=EXAMPLE.DByyyyy.SAVE,           <=== SAVE OUTPUT
//          DISP=OLD,UNIT=TAPE,VOL=SER=ADABCK
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X

//DDCARD    DD   *
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADASAV RESTORE OVERWRITE
/*

Refer to ADASAVR in the JOBS data set for this example.

Restore Files From SAVE Data Sets Created Offline

//ADASAVRF  JOB
//*
//*    ADASAV:
//*       EXAMPLE HOW TO USE ADASAV TO RESTORE A FILE
//*       TO ANY RABNS FROM AN OFFLINE SAVE
//*
//RESTORE  EXEC PGM=ADARUN
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD       <=== ADABASLOAD
//*
//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1 <=== ASSO
//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.DATAR1 <=== DATA
//DDREST1   DD   DSN=EXAMPLE.DByyyyy.SAVE,           <=== SAVE OUTPUT
//          DISP=OLD,UNIT=TAPE,VOL=SER=ADABCK
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X
//DDCARD    DD   *
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADASAV RESTORE FMOVE=2
/*

Refer to ADASAVRF in the JOBS data set for this example.

Restore Files From SAVE Data Sets Created Online

//ADASAVRO  JOB
//*
//*    ADASAV:
//*       EXAMPLE HOW TO USE ADASAV TO RESTORE FILES
//*       FROM SAVE DATA SETS CREATED ONLINE
//*
//RESTORE  EXEC PGM=ADARUN 
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD       <=== ADABAS LOAD
//*
//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1 <=== ASSO
//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.DATAR1 <=== DATA
//DDREST1   DD   DSN=EXAMPLE.DByyyyy.SAVE,           <=== SAVE OUTPUT
//          DISP=OLD,UNIT=TAPE,VOL=SER=ADABCK
//DDPLOG    DD   DSN=EXAMPLE.DByyyyy.PLOG,           <=== PLOG OUTPUT
//          DISP=OLD,UNIT=TAPE,VOL=SER=PLOGD1
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X
//DDCARD    DD   *
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADASAV RESTONL FILES=2,PLOGNUM=ppp,SYN1=1
/*

Refer to ADASAVRO in the JOBS data set for this example.

Restore Protection Log after an Interrupted RESTONL Function

//ADASAVRP  JOB
//*
//*    ADASAV:
//*       EXAMPLE HOW TO USE ADASAV TO RESTORE THE
//*       PROTECTION LOG AFTER AN INTERRUPTED RESTONL
//*
//RESTORE  EXEC PGM=ADARUN
//STEPLIB   DD   DISP=SHR,DSN=ADABAS.ADAvrs.LOAD       <=== ADABAS LOAD
//*

//DDASSOR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.ASSOR1 <=== ASSO
//DDDATAR1  DD   DISP=SHR,DSN=EXAMPLE.DByyyyy.DATAR1 <=== DATA
//DDPLOG    DD   DSN=EXAMPLE.DByyyyy.PLOG,           <=== PLOG INPUT
//          DISP=OLD,UNIT=TAPE,VOL=SER=PLOGD1
//DDDRUCK   DD   SYSOUT=X
//DDPRINT   DD   SYSOUT=X
//SYSUDUMP  DD   SYSOUT=X
//DDCARD    DD   *
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
//DDKARTE   DD   *
ADASAV RESTPLOG PLOGNUM=ppp,SYN1=1
/*

Refer to ADASAVRP in the JOBS data set for this example.

z/VSE

File	Symbolic Name	Storage	Logical Unit	Information
Associator	ASSORn	disk	see note 1
Data Storage	DATARn	disk	see note 1
Work	WORKR1 WORKR`n` (1-9) to WORK`nn` (10-32) in cluster environments	disk	see note 1	A Work data set is not required for: any ADASAV SAVE functions ADASAV RESTONL FMOVE and ADASAV RESTONL FILES functions ADASAV RESTORE FMOVE and ADASAV RESTORE FILES functions ADASAV RESTPLOG functions A Work data set is recommended for: ADASAV RESTONL and ADASAV RESTONL GCB functions ADASAV RESTORE and ADASAV RESTORE GCB functions In these cases, if a Work data set is specified, the ADASAV function resets it; if a Work data set is not specified, no Work data sets are reset. Note: In an Adabas Cluster Services or Adabas Parallel Services cluster, where each cluster has its own Work data set, the Work data sets of all nuclei in the cluster should be specified for the RESTONL/RESTORE or RESTONL GCB/RESTORE GCB functions. If a database is restored and the Work data set has not been reset, nucleus error 72 (PARM ERROR 72) may occur. To resolve this, you can reset any Work data sets using the ADAFRM utility.
Recovery log (RLOG)	RLOGR1	disk		Required for ADARAI
Backup copy	SAVE1-8	tape disk	SYS011- SYS018 see note 1	Required for SAVE
Dual copy	DUAL1-8	tape disk	SYS021- SYS028 see note 1	Required for SAVE with two backup copies
Backup copy (input for RESTORE)	REST1-8	tape disk	SYS011- SYS018 see note 1	Required for RESTORE and RESTONL
Sequential protection log	PLOG	tape disk	SYS010 see note 1	Required for RESTONL and RESTPLOG
ADARUN parameters	SYSRDR CARD CARD	reader tape disk	SYSRDR SYS000 See note 1
ADASAV parameters		reader	SYSIPT
ADARUN messages		printer	SYSLST
ADASAV messages		printer	SYS009

Notes:

Any programmer logical unit may be used.
For RESTONL, the input SAVE tapes and the sequential protection log can be concatenated, using the name REST1.

ADASAV JCS Examples (z/VSE)

See Library and File Procedures for z/VSE Examples for descriptions of the z/VSE procedures (PROCs).

Refer to the following members for these examples:

Example	Member
Save database	ADASAV.X
Save database with two copies of output	ADASAVT.X
Restore database	ADASAVR.X
Restore files from save data sets created online	ADASAVRO.X
Restore protection log after an interrupted RESTONL function	ADASAVRP.X
Restore files from save data sets created offline	ADASAVRF.X

Save Database

* $$ JOB JNM=ADASAV,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADASAV
*       SAVE THE ENTIRE DATABASE
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// ASSGN SYS011,TAPE
// PAUSE MOUNT LOAD SAVE FILE ON TAPE cuu
// TLBL SAVE1,'EXAMPLE.DByyyyy.SAVE'
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADASAV SAVE
/*
/&
* $$ EOJ

Save Database with Two Copies of Output

* $$ JOB JNM=ADASAVT,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADASAVT
*       SAVE THE ENTIRE DATABASE CREATING TWO COPIES OF THE OUTPUT
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// PAUSE MOUNT LOAD SAVE TAPES ON cu1 AND cu2
// ASSGN SYS011,TAPE
// TLBL SAVE1,'EXAMPLE.DByyyyy.SAVE'
// ASSGN SYS021,TAPE
// TLBL DUAL1,'EXAMPLE.DByyyyy.SAVE.COPY'
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADASAV SAVE TWOCOPIES
/*
/&
* $$ EOJ

Restore Database

* $$ JOB JNM=ADASAVR,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADASAVR
*       RESTORE THE ENTIRE DATABASE
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// ASSGN SYS011,TAPE
// PAUSE MOUNT LOAD SAVE FILE ON TAPE cuu
// TLBL REST1,'EXAMPLE.DByyyyy.SAVE'
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADASAV RESTORE OVERWRITE
/*
/&
* $$ EOJ

Restore Files from Save Data Sets Created Online

* $$ JOB JNM=ADASAVRO,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADASAVRO
*       RESTORE FILES FROM SAVE DATA SETS CREATED ONLINE
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// PAUSE MOUNT LOAD SAVE FILE ON TAPE cu1 AND PLOG ON TAPE cu2
// ASSGN SYS011,TAPE
// TLBL REST1,'EXAMPLE.DByyyyy.SAVE'
// ASSGN SYS010,TAPE
// TLBL PLOG,'EXAMPLE.DByyyyy.PLOG5'
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADASAV RESTONL FILES=2,PLOGNUM=ppp,SYN1=1
/*
/&
* $$ EOJ

Restore Protection Log after an Interrupted RESTONL Function

* $$ JOB JNM=ADASAVRP,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADASAVRP
*       RESTORE THE PROTECTION LOG AFTER AN INTERRUPTED RESTONL
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// PAUSE MOUNT LOAD PLOG FILE ON TAPE cuu
// ASSGN SYS010,TAPE
// TLBL PLOG,'EXAMPLE.DByyyyy.PLOG5'
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADASAV RESTPLOG PLOGNUM=ppp,SYN1=1
/*
/&
* $$ EOJ

Restore Files From Save Data Sets Created Offline

* $$ JOB JNM=ADASAVRF,CLASS=A,DISP=D
* $$ LST CLASS=A,DISP=D
// JOB ADASAVRF
*       RESTORE A FILE TO ANY RABNS FROM AN OFFLINE SAVE
// EXEC PROC=ADAVvLIB
// EXEC PROC=ADAVvFIL
// ASSGN SYS011,TAPE
// PAUSE MOUNT LOAD SAVE FILE ON TAPE cuu
// TLBL REST1,'EXAMPLE.DByyyyy.SAVE'
// EXEC ADARUN,SIZE=ADARUN
ADARUN PROG=ADASAV,SVC=xxx,DEVICE=dddd,DBID=yyyyy
/*
ADASAV RESTORE FMOVE=2
/*
/&
* $$ EOJ

SEARCH INDEX CONTENTS | PDF PAGE PDF BOOKS | HOME UP PREV NEXT